Resources

An automated optical inspection camera monitors a rotating turbine shaft and measures a rotational period of T=1.25×10−2 sT = 1.25 \times 10^{-2}\text{ s}. Backtracking through the mechanical transmission records reveals that this shaft is driven by a motor with a step-down gear ratio of 4:14:1 (the motor shaft completes 44 revolutions for every 11 revolution of the turbine shaft). Determine the rotational frequency fmotorf_{\text{motor}} of the motor shaft in revolutions per minute (rpm\text{rpm}).

Answer and steps

Final answer

fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

Steps

01

Calculate the rotational frequency of the turbine shaft

The rotational frequency fturbinef_{\text{turbine}} represents the number of revolutions per second (rev/s\text{rev/s} or Hz\text{Hz}) and is the reciprocal of the rotational period TT:

fturbine=1Tf_{\text{turbine}} = \frac{1}{T}

Substitute the given period T=1.25×10−2 sT = 1.25 \times 10^{-2}\text{ s}:

fturbine=11.25×10−2 s=80 rev/sf_{\text{turbine}} = \frac{1}{1.25 \times 10^{-2}\text{ s}} = 80\text{ rev/s}


02

Determine the rotational frequency of the motor shaft in revolutions per second

The gear transmission is a step-down system with a 4:14:1 ratio, meaning the motor shaft completes 44 revolutions for every 11 revolution of the turbine shaft. Consequently, the motor shaft rotates 44 times faster than the turbine shaft:

fmotor=4⋅fturbinef_{\text{motor}} = 4 \cdot f_{\text{turbine}}

fmotor=4⋅80 rev/s=320 rev/sf_{\text{motor}} = 4 \cdot 80\text{ rev/s} = 320\text{ rev/s}

Common Pitfall: Be careful with the direction of the gear ratio. A "step-down" transmission reduces rotational speed from the input (motor) to the output (turbine). Therefore, the motor must rotate faster than the turbine shaft, requiring multiplication by 44 rather than division.


03

Convert the motor frequency to revolutions per minute (rpm\text{rpm})

To convert revolutions per second to revolutions per minute, multiply by 60 s/min60\text{ s/min}:

fmotor=320 rev/s⋅60 s/min=19,200 rpmf_{\text{motor}} = 320\text{ rev/s} \cdot 60\text{ s/min} = 19{,}200\text{ rpm}

In scientific notation, this is:

fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the gear ratio relation and divides the turbine frequency by 4 instead of multiplying by 4, obtaining 1200 rpm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fturbine=1T=1(1.25×10−2)=80 rev/sf_{\text{turbine}} = \frac{1}{T} = \frac{1}{(1.25 \times 10^{-2})} = 80\text{ rev/s}

  2. Step 2

    fmotor=fturbine4=804=20 rev/sf_{\text{motor}} = \frac{f_{\text{turbine}}}{4} = \frac{80}{4} = 20\text{ rev/s}

    Correct

    fmotor=4⋅fturbine=4×80=320 rev/sf_{\text{motor}} = 4 \cdot f_{\text{turbine}} = 4 \times 80 = 320\text{ rev/s}

    Because the step-down transmission has the motor turn 44 revolutions for every 11 revolution of the turbine, the motor shaft rotates faster than the turbine shaft. You should multiply fturbinef_{\text{turbine}} by 44 rather than dividing by 44.

  3. Step 3

    fmotor=20×60=1200 rpmf_{\text{motor}} = 20 \times 60 = 1200\text{ rpm}

    Correct

    fmotor=320×60=19,200 rpm=1.92×104 rpmf_{\text{motor}} = 320 \times 60 = 19{,}200\text{ rpm} = 1.92 \times 10^4\text{ rpm}

    Your conversion from revolutions per second to revolutions per minute by multiplying by 6060 was conceptually correct, but the numerical result was affected by the error in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the reciprocal relation f=1Tf = \frac{1}{T} to find the frequency from the rotational period.

You used the correct unit conversion factor of 60 s/min60\text{ s/min} to convert rev/s to rpm.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted gear ratio relation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the term 'step-down' with dividing by the gear ratio, overlooking that the turbine is the output shaft and the motor is the faster-spinning input driver.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gear Ratio Orientation
  • In a step-down gear system (ratio N:1N:1), the driving input shaft rotates NN times faster than the driven output shaft: finput=N⋅foutputf_{\text{input}} = N \cdot f_{\text{output}}.

  • Identify whether you are solving for the faster input shaft or the slower output shaft before choosing multiplication or division.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the defined 4:14:1 speed relation to find the motor speed: fmotor=4⋅fturbine=4×80 rev/s=320 rev/sf_{\text{motor}} = 4 \cdot f_{\text{turbine}} = 4 \times 80\text{ rev/s} = 320\text{ rev/s}.

  2. Convert from rev/s to rpm by multiplying by 60 s/min60\text{ s/min}: fmotor=320×60=19,200 rpm=1.92×104 rpmf_{\text{motor}} = 320 \times 60 = 19{,}200\text{ rpm} = 1.92 \times 10^4\text{ rpm}.

Final answer

fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review mechanical gear ratio definitions to consistently distinguish between driving (input) and driven (output) shafts.

  • Perform a qualitative sanity check: in a speed-reducing gearbox, verify that the motor speed is strictly greater than the load speed.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the motor frequency in revolutions per second correctly but forgets to convert from seconds to minutes (rpm), leaving the answer as 320 rpm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fturbine=11.25×10−2 s=80 Hzf_{\text{turbine}} = \frac{1}{1.25 \times 10^{-2}\text{ s}} = 80\text{ Hz}

  2. Step 2

    fmotor=4×80=320 rpmf_{\text{motor}} = 4 \times 80 = 320\text{ rpm}

    Correct

    fmotor=4×80 rev/s=320 rev/s=320×60 rpm=19,200 rpmf_{\text{motor}} = 4 \times 80\text{ rev/s} = 320\text{ rev/s} = 320 \times 60\text{ rpm} = 19{,}200\text{ rpm}

    You multiplied by the gear ratio correctly to obtain 320 rev/s320\text{ rev/s} (or Hz\text{Hz}), but you labeled this value as rpm\text{rpm} without converting seconds to minutes.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the reciprocal relationship f=1Tf = \frac{1}{T} accurately to compute the turbine frequency.

You correctly interpreted the 4:14:1 step-down ratio to deduce that the motor rotates 44 times faster than the turbine shaft.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion omitted

You treated revolutions per second (Hz) as equivalent to revolutions per minute (rpm).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the dimensional difference between time in seconds and time in minutes when writing down rotational speed units.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit tracking in rotational frequency
  • 1 Hz=1 rev/s=60 rev/min=60 rpm1\text{ Hz} = 1\text{ rev/s} = 60\text{ rev/min} = 60\text{ rpm}

  • Always carry explicit units through each step, and multiply by 60 s1 min\frac{60\text{ s}}{1\text{ min}} whenever converting from rev/s\text{rev/s} to rpm\text{rpm}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate motor frequency in revolutions per second: fmotor=4×80 rev/s=320 rev/sf_{\text{motor}} = 4 \times 80\text{ rev/s} = 320\text{ rev/s}.

  2. Convert revolutions per second to revolutions per minute: fmotor=320 rev/s×60 s/min=19,200 rpmf_{\text{motor}} = 320\text{ rev/s} \times 60\text{ s/min} = 19{,}200\text{ rpm}.

Final answer

fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out full dimensional units like rev/s\text{rev/s} instead of just numbers before stating the final unit.

  • Multiply rotational frequency in Hz\text{Hz} by 6060 whenever the target unit is rpm\text{rpm}.

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the unit conversion by dividing by 60 instead of multiplying by 60 when converting from revolutions per second to revolutions per minute, yielding 5.33 rpm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fturbine=11.25×10−2=80 rev/sf_{\text{turbine}} = \frac{1}{1.25 \times 10^{-2}} = 80\text{ rev/s}

  2. Step 2

    fmotor=4×80=320 rev/sf_{\text{motor}} = 4 \times 80 = 320\text{ rev/s}

  3. Step 3

    fmotor=32060=5.33 rpmf_{\text{motor}} = \frac{320}{60} = 5.33\text{ rpm}

    Correct

    fmotor=320 rev/s×60 s/min=19,200 rpm=1.92×104 rpmf_{\text{motor}} = 320\text{ rev/s} \times 60\text{ s/min} = 19{,}200\text{ rpm} = 1.92 \times 10^4\text{ rpm}

    To convert from revolutions per second to revolutions per minute, you must multiply by 60 s/min60\text{ s/min} because there are 60 seconds in one minute, which gives more revolutions in a minute than in a single second.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the frequency of the turbine shaft using f=1Tf = \frac{1}{T}.

You properly accounted for the 4:1 transmission ratio by multiplying the turbine frequency by 4.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Error (Inverted Conversion Factor)

You divided by 60 instead of multiplying by 60 when converting units of time in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When converting a rate per second to a rate per minute, the time unit is in the denominator (revs\frac{\text{rev}}{\text{s}}). Multiplying by the conversion factor 60 s1 min\frac{60\text{ s}}{1\text{ min}} cancels seconds and multiplies the numerical value by 60. Dividing by 60 incorrectly treats the conversion as moving from minutes to seconds.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Setup
  • Always write out the units explicitly as conversion fractions: revs×60 s1 min=revmin\frac{\text{rev}}{\text{s}} \times \frac{60\text{ s}}{1\text{ min}} = \frac{\text{rev}}{\text{min}}.

  • Check that units in the numerator and denominator cancel out properly before carrying out the arithmetic.

Reasonableness Check
  • A rotating object completes 60 times more revolutions in a full minute than it does in a single second.

  • Confirm that the numerical value in rpm is substantially larger than the value in rev/s.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. fmotor=320 rev/sf_{\text{motor}} = 320\text{ rev/s}

  2. fmotor=320revs×60 s1 min=19,200 rpmf_{\text{motor}} = 320\frac{\text{rev}}{\text{s}} \times \frac{60\text{ s}}{1\text{ min}} = 19{,}200\text{ rpm}

  3. fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

Final answer

fmotor=1.92×104 rpmf_{\text{motor}} = 1.92 \times 10^4\text{ rpm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice unit conversions involving rates using explicit fraction cancellation.

  • Perform a quick physical sanity check: ask yourself whether a machine completes more or fewer turns in one full minute compared to one second.

Lock it in

Similar question

01

A conveyor roller rotates with a period of T=0.05 sT = 0.05\text{ s}. It is driven by a motor via a 5:15:1 step-down gear train (the motor makes 55 revolutions per 11 roller revolution). Find the motor frequency in rpm\text{rpm}.

Answer

fmotor=6000 rpmf_{\text{motor}} = 6000\text{ rpm}. First, find the roller frequency: froller=1T=10.05 s=20 rev/sf_{\text{roller}} = \frac{1}{T} = \frac{1}{0.05\text{ s}} = 20\text{ rev/s}. Next, find motor frequency: fmotor=5×20 rev/s=100 rev/sf_{\text{motor}} = 5 \times 20\text{ rev/s} = 100\text{ rev/s}. Finally, convert to rpm: 100×60=6000 rpm100 \times 60 = 6000\text{ rpm}.

02

An industrial mixer blade rotates at 180 rpm180\text{ rpm}. The driving motor is connected through a 6:16:1 step-down gearbox. Determine the period of rotation TmotorT_{\text{motor}} of the motor shaft in seconds.

Answer

Tmotor=5.56×10−2 sT_{\text{motor}} = 5.56 \times 10^{-2}\text{ s} (or 118 s\frac{1}{18}\text{ s}). The motor frequency is fmotor=6×180 rpm=1080 rpmf_{\text{motor}} = 6 \times 180\text{ rpm} = 1080\text{ rpm}. In rev/s: fmotor=108060=18 rev/sf_{\text{motor}} = \frac{1080}{60} = 18\text{ rev/s}. The period is Tmotor=118 s≈0.0556 sT_{\text{motor}} = \frac{1}{18}\text{ s} \approx 0.0556\text{ s}.

03

A wind turbine rotor has a rotational period of T=3.0 sT = 3.0\text{ s}. It connects to an electric generator via a step-up gearbox with a ratio of 1:901:90 (the generator shaft completes 9090 revolutions for every 11 revolution of the turbine rotor). Calculate the generator's rotational speed in rpm\text{rpm}.

Answer

fgen=1800 rpmf_{\text{gen}} = 1800\text{ rpm}. The rotor frequency is frotor=13.0 s=13 rev/sf_{\text{rotor}} = \frac{1}{3.0\text{ s}} = \frac{1}{3}\text{ rev/s}. In rev/min, frotor=13×60=20 rpmf_{\text{rotor}} = \frac{1}{3} \times 60 = 20\text{ rpm}. With a 1:901:90 step-up transmission, fgen=90×20 rpm=1800 rpmf_{\text{gen}} = 90 \times 20\text{ rpm} = 1800\text{ rpm}.

Loading workspace…