Resources
A small light-emitting diode (LED) is positioned on the principal axis of a converging thin lens having a focal length . In geometric ray tracing, a critical threshold separates the formation of real inverted images from virtual upright images. (a) Describe the behavior and geometric orientation of the refracted rays when the LED is placed exactly at the front focal point (). (b) If the LED is moved to an object distance (inside the focal threshold), compute the resulting image distance , magnification , and classify whether the image can be projected onto a physical screen.
Answer and steps
Final answer
(a) Refracted rays emerge perfectly parallel to one another and to the focal line, meaning no image forms at any finite distance (); (b) , , and the image is virtual (cannot be projected onto a physical screen).
Steps
Part (a): Ray Behavior at the Focal Point ()
-
Apply the Thin Lens Equation: The relationship between focal length , object distance , and image distance is:
Substituting and :
- Geometric Interpretation: By definition of the focal point, light rays diverging from a point source located at the front focal point refract through a converging lens and emerge parallel to one another and parallel to the principal axis. Because the exiting rays do not converge or diverge from a single point at a finite location, no image is formed at any finite distance.
Part (b): Image Formation Inside the Focal Length ()
- Calculate the Image Distance (): Rearranging the thin lens equation for :
- Calculate the Lateral Magnification (): The magnification formula is: Substituting the known values:
-
Classify the Image Type and Projectability:
- Virtual vs. Real: The negative image distance () indicates that the refracted rays diverge on the transmission side of the lens. To an observer, they appear to originate from a point behind the lens on the same side as the object. Therefore, the image is virtual (and upright, as indicated by ).
- Projectability: Real images are formed by the actual intersection of light rays and can be projected onto a physical surface. Because virtual images are formed where rays only appear to diverge from, the image cannot be projected onto a physical screen.
Typical errors
01 The student adds the fractions incorrectly by adding denominators or subtracting incorrectly, yielding d_i = +30.0 cm instead of -30.0 cm, leading to the misclassification that the image is real and projectable.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Rays refract through the lens and emerge parallel to the principal axis. No focused image forms at a finite distance.
- Step 2Correct
When rearranging the thin lens equation , you subtracted rather than . The correct rearrangement is , giving a negative image distance.
- Step 3Correct
You correctly applied the magnification formula , but your result inherited the sign error from your positive .
- Step 4
The image is real, so it can be projected onto a physical screen.
CorrectThe image is virtual (, ), so it cannot be projected onto a physical screen.
Because your calculated image distance was positive, you concluded the image was real. With the correct value , the rays diverge after passing through the lens, forming a virtual image that cannot be caught on a physical screen.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly stated the optical behavior of light diverging from the focal point of a converging lens.
You correctly recalled the lateral magnification definition .
You correctly associated positive image distances with real, projectable images.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeReversing the order of terms to instead of when solving for .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIsolating by subtracting from both sides instead of subtracting , which inverted the sign of the resulting focal difference.
REASONING PATH
Your ACEpath teacher’s suggested approach- Isolating Variables in the Lens Equation
Start with . To solve for , subtract from both sides: .
Always verify which term contains the target variable before subtracting from the total reciprocal focal length.
- Sign Check for Converging Lenses
For a converging lens (), placing an object inside the focal length () always produces a virtual image with and .
Compare with before calculating: since , immediately expect to be negative.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite down the standard thin lens formula:
Subtract from both sides to isolate :
Substitute and :
Invert both sides:
Calculate magnification:
Classify the image: Because , the image is virtual (and upright since ), meaning it cannot be projected onto a physical screen.
(a) Refracted rays emerge parallel to the principal axis (), so no image forms at a finite distance; (b) , , and the image is virtual (cannot be projected onto a physical screen).
02 The student omits the negative sign in the lateral magnification formula m = -d_i/d_o, obtaining m = -3.0 for a virtual upright image.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
Refracted rays emerge parallel to the principal axis without intersecting.
- Step 2
- Step 3Correct
The formula for lateral magnification includes a negative sign: . Omitting this sign gave an erroneous negative magnification, which would incorrectly indicate an inverted image rather than an upright virtual image.
- Step 4
Because is negative, it is a virtual image and cannot be projected onto a physical screen.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that light diverging from the focal point emerges parallel to the principal axis.
You accurately rearranged and solved the thin lens equation to find .
You correctly related a negative image distance to a virtual, non-projectable image.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeOmitting the leading negative sign in the lateral magnification formula .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the magnitude ratio with the signed lateral magnification definition , which requires an explicit negative sign so that positive magnification corresponds to an upright image and negative magnification corresponds to an inverted image.
REASONING PATH
Your ACEpath teacher’s suggested approach- Lateral Magnification Formula
For thin lenses and curved mirrors, lateral magnification is defined as .
Always write the formula with the explicit negative sign before substituting values.
- Consistency Check Between $m$ and Image Type
A virtual image produced by a single lens from a real object is always upright (), whereas a real image is inverted ().
Verify that your calculated has a positive sign whenever is negative.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the definition of lateral magnification: .
Substitute and : .
(a) Refracted rays emerge parallel to each other and to the principal axis (); (b) , , and the image is virtual (cannot be projected onto a physical screen).
03 The student misinterprets rays passing through the front focal point as passing undeviated like rays through the optical center.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
The rays pass straight through the lens without bending and continue diverging outward. They form a virtual image at the focal point.
CorrectRefracted rays emerge parallel to the principal axis and to each other, so no image forms at any finite distance ().
Only the ray passing through the optical center of a thin lens continues undeviated without bending. Rays originating from the front focal point of a converging lens refract to emerge parallel to the principal axis, so no image forms at any finite distance.
- Step 2
- Step 3
- Step 4
Since the image is virtual, it cannot be projected onto a screen.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly rearranged and evaluated the thin lens equation for an object inside the focal length.
You correctly used the lateral magnification formula including the proper signs.
You correctly linked the virtual nature of the image to its inability to be projected onto a physical screen.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the principal ray passing through the optical center (which passes straight through without bending) with rays originating from the front focal point (which refract parallel to the principal axis).
REASONING PATH
Your ACEpath teacher’s suggested approach- Principal Rays for a Converging Lens
- Parallel ray: enters parallel to principal axis refracts through the rear focal point . 2. Focal ray: passes through the front focal point refracts parallel to the principal axis. 3. Central ray: passes through the optical center continues straight through without bending.
Always verify which landmark the incoming ray passes through: center means undeviated, focal point means parallel after refraction.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecall the thin lens equation for : .
Because , the image distance is .
Geometrically, all rays diverging from the front focal point strike the converging lens and refract so that they emerge mutually parallel to each other and parallel to the principal axis.
Refracted rays emerge parallel to the principal axis, so no focused image is formed at any finite distance ().
Lock it in
How do you correctly isolate from the thin lens equation ?
. Subtract the object term from the focal term , never the reverse.
Similar question
A converging lens has a focal length of . An object is placed at . Compute the image distance , lateral magnification , and state whether the image is real or virtual.
Answer
, , virtual image.\n\nKey steps:\n1. .\n2. .\n3. (virtual and upright).
An object placed from a converging lens produces a virtual image located from the lens on the same side as the object. Determine the focal length of the lens and its lateral magnification .
Answer
, .\n\nKey steps:\n1. A virtual image means .\n2. .\n3. .
A student uses a magnifying glass () to inspect a stamp. They want an upright virtual image magnified by a factor of . Find the required object distance and verify the sign of .
Answer
, .\n\nKey steps:\n1. .\n2. Substitute into thin lens equation: .\n3. .\n4. (negative confirms virtual image).