Resources
A block of mass rests on a rough horizontal surface with coefficient of kinetic friction . It is connected by an ideal, light, inextensible cord passing over a frictionless, massless pulley to a hanging bucket of mass . The system is released from rest. Taking , find: (a) the magnitude of the system's acceleration , and (b) the tension in the connecting cord.
Answer and steps
Final answer
(a) ; (b)
Steps
Identify the forces acting on each object
Draw a free-body diagram for each mass to determine the equations of motion:
-
For the horizontal block ():
- Vertically, the block is in equilibrium: the normal force balances the gravitational force:
- Since the surface is rough, a kinetic friction force opposes the motion to the right:
- Horizontally, the tension force pulls to the right, and friction acts to the left. By Newton's second law:
-
For the hanging bucket ():
- The bucket moves downward, so the downward gravitational force exceeds the upward tension force:
Determine the acceleration of the system
Since the string is inextensible and the pulley is ideal, both masses experience the same magnitude of acceleration .
Add Equation 1 and Equation 2 together to eliminate the internal tension force :
Solve for :
Substitute the known numerical values:
Calculate the tension in the cord
Substitute the acceleration into Equation 2 (or Equation 1):
(Verification using Equation 1: , which confirms the result.)
Common Pitfall: Never set the tension equal to the full weight of the hanging mass (). When the bucket accelerates downward, the upward tension must be strictly less than its weight.
Typical errors
01 The student ignores the friction acting on the horizontal surface, calculating acceleration as if the table were frictionless.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly related the total accelerating mass to the net force, but you omitted the opposing kinetic friction force along the rough table.
- Step 2Correct
You omitted the friction force acting on in the horizontal equation of motion. Because friction opposes the rightward motion, the tension must overcome both inertia and friction: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly treated the two connected masses as a single system sharing a common acceleration magnitude.
You calculated the total mass of the system accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou did not construct a complete free-body diagram for the block on the rough surface, causing you to overlook the kinetic friction force in both Newton's second law for the system and the isolation of the block.
REASONING PATH
Your ACEpath teacher’s suggested approach- Account for all external forces along the line of motion
For a system moving along a connected path, the net external force is .
Always list every driving force (such as hanging gravity) and opposing force (such as friction) before writing .
- Include friction when isolating an object
On a rough horizontal surface, horizontal Newton's second law is , so .
Draw a free-body diagram for mass with both tension pointing forward and kinetic friction pointing backward.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the kinetic friction on the horizontal block: .
Apply Newton's second law to the whole system along the direction of motion: .
Solve for acceleration: .
Find tension using mass : (or via hanging mass: ).
(a) ; (b)
02 The student divides the net driving force by only the hanging mass m2 instead of the total mass of the system.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
When treating the connected blocks as a single system, the net external driving force must accelerate both masses simultaneously, so the total mass is , not just .
- Step 3Correct
Your formula for the tension from the hanging bucket's equation of motion is correct, but your numerical answer was thrown off by the incorrect acceleration from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the normal force and kinetic friction force acting on mass .
You correctly identified that the hanging mass is accelerated downward by gravity against the upward cord tension.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the net driving force to accelerate only the hanging mass instead of the combined mass of the connected system . Because the cord connects both objects, any acceleration of requires an identical acceleration of .
REASONING PATH
Your ACEpath teacher’s suggested approach- System Mass Rule
For objects linked by an inextensible cord, .
Always add together all accelerating masses when applying Newton's second law to an entire connected system.
- Individual Free-Body Diagram Check
If analyzing objects individually: and .
Add the two individual equations together to eliminate the internal tension and verify that appears on the right-hand side.
CORRECTED PATH
ACEpath Teacher's DemonstrationEquate the net external force to the total system mass: .
Solve for the acceleration: .
Substitute into : .
(a) ; (b)
03 The student assumes the tension in the cord is equal to the static weight of the hanging mass rather than accounting for its downward acceleration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted the hanging mass's static weight () for the tension and divided only by . Because the hanging mass also accelerates, the net driving force () must accelerate the combined mass of the entire system (). Notice that your result, , exceeds , which is not physically possible for a gravity-driven system.
- Step 4Correct
This step is affected by your earlier assumption that . For a mass accelerating downward, Newton's second law requires , which means .
WHAT YOU DID WELL
Compliments from Your TeacherYou calculated the normal force and kinetic friction force on the block accurately.
You correctly formulated the horizontal equation of motion for block .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the hanging bucket as if it were in static equilibrium rather than an accelerating component of a connected two-body system, leading you to set instead of applying Newton's second law to both masses.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check system acceleration against gravity
In a passive system driven solely by gravity, the magnitude of acceleration cannot exceed free-fall acceleration .
Whenever you compute an acceleration greater than without an external driving force or motor, re-examine your system equations.
- Dynamic tension for a downward accelerating mass
For a mass accelerating downward with acceleration , Newton's second law gives , so .
Always write separate dynamic equations for each body (or treat the connected system with total mass ) rather than assuming .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law for the downward accelerating bucket: .
Add the two equations to eliminate internal tension: .
Substitute the numerical values: .
Substitute back to find tension: .
(a) ; (b)
Lock it in
For a block of mass sliding across a rough horizontal table with kinetic friction coefficient , what is the magnitude of the friction force?
. On a level surface with no angled pulls, normal force equals gravitational force: .
Similar question
A block of mass rests on a rough horizontal table with . It is connected by an ideal cord over a light pulley to a hanging mass . Take . Calculate the system acceleration .
Answer
. Key steps: . Driving weight is . Net force is . Acceleration .
A cart on a rough horizontal track (_k = 6.00\text{ N}) is tied to a hanging mass of . Take . Find both the acceleration and the tension in the cord.
Answer
, . Key steps: . System equation: . Cord tension from hanging mass: .
A block of mass is on a rough ramp inclined at above the horizontal with . A cord passes over a pulley at the top of the ramp to a hanging mass . If the system accelerates so that moves up the ramp, find the acceleration . Take .
Answer
. Key steps: Normal force on ramp . Friction opposing upward motion . Down-ramp gravitational component . Driving force . Net force . Total mass is , so .