Resources

A diagnostic gamma camera records a total energy deposition of 4.80×10−4 J4.80 \times 10^{-4}\text{ J} from Technetium-99m (99mTc^{99m}\text{Tc}) gamma rays (Eγ=140.5 keVE_\gamma = 140.5\text{ keV}) absorbed uniformly in an organ tissue mass of m=250.0 gm = 250.0\text{ g}. For gamma radiation, the radiation weighting factor is wR=1.0 Sv/Gyw_R = 1.0\text{ Sv/Gy}. In contrast, a localized internal contamination delivers an absorbed dose of 1.50×10−2 mrad1.50 \times 10^{-2}\text{ mrad} from alpha particles (wR=20.0 Sv/Gyw_R = 20.0\text{ Sv/Gy}). Convert the absorbed dose of the gamma rays into milligrays (mGy\text{mGy}), calculate the total equivalent dose HγH_\gamma in millisieverts (mSv\text{mSv}), and calculate the equivalent dose HαH_\alpha of the alpha radiation in microrem (μrem\mu\text{rem}) and microsieverts (μSv\mu\text{Sv}).

Answer and steps

Final answer

Absorbed gamma dose =1.92 mGy= 1.92\text{ mGy}; Hγ=1.92 mSvH_\gamma = 1.92\text{ mSv}; Hα=300 μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} = 3.00\ \mu\text{Sv}.

Steps

In Microrem (μrem\mu\text{rem})

01

Absorbed Dose of the Gamma Radiation

The absorbed dose (DD) measures the energy deposited by ionizing radiation per unit mass of matter: D=EmD = \frac{E}{m} Given:

  • Deposited energy, E=4.80×10−4 JE = 4.80 \times 10^{-4}\text{ J}
  • Tissue mass, m=250.0 g=0.2500 kgm = 250.0\text{ g} = 0.2500\text{ kg} Substitute these values: Dγ=4.80×10−4 J0.2500 kg=1.92×10−3 J/kg=1.92×10−3 GyD_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 \times 10^{-3}\text{ J/kg} = 1.92 \times 10^{-3}\text{ Gy} Converting to milligrays (1 Gy=103 mGy1\text{ Gy} = 10^3\text{ mGy}): Dγ=1.92 mGyD_\gamma = 1.92\text{ mGy}

02

Equivalent Dose of the Gamma Radiation

The equivalent dose (HH) accounts for the biological effectiveness of different radiation types: H=D⋅wRH = D \cdot w_R For gamma rays, the radiation weighting factor is wR=1.0 Sv/Gyw_R = 1.0\text{ Sv/Gy}: Hγ=1.92 mGy⋅1.0 Sv/Gy=1.92 mSvH_\gamma = 1.92\text{ mGy} \cdot 1.0\text{ Sv/Gy} = 1.92\text{ mSv}

03

Equivalent Dose of the Alpha Radiation

The absorbed dose from the alpha contamination is given in traditional units: Dα=1.50×10−2 mradD_\alpha = 1.50 \times 10^{-2}\text{ mrad}

Using the radiation weighting factor for alpha particles (wR=20.0w_R = 20.0): Hα=Dα⋅wR=(1.50×10−2 mrad)⋅20.0=0.300 mremH_\alpha = D_\alpha \cdot w_R = (1.50 \times 10^{-2}\text{ mrad}) \cdot 20.0 = 0.300\text{ mrem}

Converting to microrem (1 mrem=1000 μrem1\text{ mrem} = 1000\ \mu\text{rem}): Hα=0.300×1000 μrem=300 μremH_\alpha = 0.300 \times 1000\ \mu\text{rem} = 300\ \mu\text{rem}

In Microsieverts (μSv\mu\text{Sv})

Recall the standard conversion between traditional and SI dose units: 1 rem=0.01 Sv=104 μSv  ⟹  1 μrem=0.01 μSv1\text{ rem} = 0.01\text{ Sv} = 10^4\ \mu\text{Sv} \implies 1\ \mu\text{rem} = 0.01\ \mu\text{Sv}

Converting the equivalent dose: Hα=300 μrem⋅0.01 μSv/μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} \cdot 0.01\ \mu\text{Sv}/\mu\text{rem} = 3.00\ \mu\text{Sv}

(Alternatively, converting absorbed dose directly to SI units: Dα=1.50×10−2 mrad=1.50×10−7 Gy=0.150 μGyD_\alpha = 1.50 \times 10^{-2}\text{ mrad} = 1.50 \times 10^{-7}\text{ Gy} = 0.150\ \mu\text{Gy}, so Hα=0.150 μGy⋅20.0=3.00 μSvH_\alpha = 0.150\ \mu\text{Gy} \cdot 20.0 = 3.00\ \mu\text{Sv}.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the tissue mass from grams to kilograms when calculating the absorbed dose, yielding a dose that is 1000 times too small.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Dγ=4.80×10−4 J250.0 g=1.92×10−6 Gy  ⟹  Dγ=1.92×10−3 mGyD_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{250.0\text{ g}} = 1.92 \times 10^{-6}\text{ Gy} \implies D_\gamma = 1.92 \times 10^{-3}\text{ mGy}

    Correct

    Dγ=4.80×10−4 J0.2500 kg=1.92×10−3 Gy=1.92 mGyD_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 \times 10^{-3}\text{ Gy} = 1.92\text{ mGy}

    You divided the deposited energy in joules directly by mass in grams without converting to kilograms. Because 1 Gy=1 J/kg1\text{ Gy} = 1\text{ J/kg}, the mass must be in kilograms: 250.0 g=0.2500 kg250.0\text{ g} = 0.2500\text{ kg}.

  2. Step 2

    Hγ=1.0×(1.92×10−3 mGy)=1.92×10−3 mSvH_\gamma = 1.0 \times (1.92 \times 10^{-3}\text{ mGy}) = 1.92 \times 10^{-3}\text{ mSv}

    Correct

    Hγ=1.92 mGy×1.0 Sv/Gy=1.92 mSvH_\gamma = 1.92\text{ mGy} \times 1.0\text{ Sv/Gy} = 1.92\text{ mSv}

    You correctly multiplied by the gamma weighting factor wR=1.0 Sv/Gyw_R = 1.0\text{ Sv/Gy}, but the result inherited the factor-of-10001000 error from the absorbed dose calculation.

  3. Step 3

    Hα=20.0×(1.50×10−2 mrad)=0.300 mrem=300 μremH_\alpha = 20.0 \times (1.50 \times 10^{-2}\text{ mrad}) = 0.300\text{ mrem} = 300\ \mu\text{rem}

  4. Step 4

    Hα=300×0.01 μSv=3.00 μSvH_\alpha = 300 \times 0.01\ \mu\text{Sv} = 3.00\ \mu\text{Sv}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the equivalent dose formula H=D⋅wRH = D \cdot w_R for both radiation types.

You used the correct radiation weighting factor of 20.020.0 for alpha particles and 1.01.0 for gamma rays.

You accurately converted between traditional and SI equivalent dose units (1 rem=0.01 Sv1\text{ rem} = 0.01\text{ Sv}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SI Base Unit Conversion Missed

You divided joules directly by grams instead of converting the tissue mass to kilograms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The definition of the gray is derived directly from SI base units (1 Gy=1 J/kg1\text{ Gy} = 1\text{ J/kg}). When tissue mass is given in grams, it must first be scaled to kilograms (1 kg=103 g1\text{ kg} = 10^3\text{ g}) before calculating absorbed dose.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Definition of Gray
  • 1 Gy=1 J/kg=10−3 J/g1\text{ Gy} = 1\text{ J/kg} = 10^{-3}\text{ J/g}

  • Always convert target mass to kilograms before computing D=E/mD = E/m in grays.

Unit Scaling Check
  • Dividing joules by grams yields J/g=103 Gy=106 mGy\text{J/g} = 10^3\text{ Gy} = 10^6\text{ mGy}, not Gy\text{Gy}.

  • Verify that your input units match the base definition of the target unit.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert mass: m=250.0 g=0.2500 kgm = 250.0\text{ g} = 0.2500\text{ kg}.

  2. Compute absorbed dose: Dγ=4.80×10−4 J0.2500 kg=1.92×10−3 Gy=1.92 mGyD_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 \times 10^{-3}\text{ Gy} = 1.92\text{ mGy}.

  3. Compute equivalent dose: Hγ=Dγ⋅wR=1.92 mGy×1.0 Sv/Gy=1.92 mSvH_\gamma = D_\gamma \cdot w_R = 1.92\text{ mGy} \times 1.0\text{ Sv/Gy} = 1.92\text{ mSv}.

Final answer

Absorbed gamma dose =1.92 mGy= 1.92\text{ mGy}; Hγ=1.92 mSvH_\gamma = 1.92\text{ mSv}; Hα=300 μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} = 3.00\ \mu\text{Sv}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out explicit units for each variable before plugging numbers into your calculator.

  • Remember that the gray (Gy\text{Gy}) requires mass in kilograms, whereas density or concentration formulas might use grams.

  • Review traditional unit conversions: 1 rad=0.01 Gy1\text{ rad} = 0.01\text{ Gy} and 1 rem=0.01 Sv1\text{ rem} = 0.01\text{ Sv}.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the conversion between rem and sievert as 1 rem = 1 Sv instead of 1 rem = 0.01 Sv, making the equivalent dose in microsieverts 100 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m=250.0 g=0.2500 kg  ⟹  Dγ=4.80×10−4 J0.2500 kg=1.92×10−3 Gy=1.92 mGym = 250.0\text{ g} = 0.2500\text{ kg} \implies D_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 \times 10^{-3}\text{ Gy} = 1.92\text{ mGy}

  2. Step 2

    Hγ=1.0×1.92 mGy=1.92 mSvH_\gamma = 1.0 \times 1.92\text{ mGy} = 1.92\text{ mSv}

  3. Step 3

    Hα=20.0×(1.50×10−2 mrad)=0.300 mrem=300 μremH_\alpha = 20.0 \times (1.50 \times 10^{-2}\text{ mrad}) = 0.300\text{ mrem} = 300\ \mu\text{rem}

  4. Step 4

    1 rem=1 Sv, so 300 μrem=300 μSv1\text{ rem} = 1\text{ Sv}\text{, so } 300\ \mu\text{rem} = 300\ \mu\text{Sv}

    Correct

    1 rem=0.01 Sv  ⟹  1 μrem=0.01 μSv  ⟹  Hα=300×0.01 μSv=3.00 μSv1\text{ rem} = 0.01\text{ Sv} \implies 1\ \mu\text{rem} = 0.01\ \mu\text{Sv} \implies H_\alpha = 300 \times 0.01\ \mu\text{Sv} = 3.00\ \mu\text{Sv}

    You assumed that 1 rem=1 Sv1\text{ rem} = 1\text{ Sv}, but rem and sievert differ by a factor of 100100: 1 Sv=100 rem1\text{ Sv} = 100\text{ rem} (1 rem=10−2 Sv1\text{ rem} = 10^{-2}\text{ Sv}). Consequently, 300 μrem300\ \mu\text{rem} converts to 3.00 μSv3.00\ \mu\text{Sv}, not 300 μSv300\ \mu\text{Sv}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the absorbed dose by converting tissue mass to kilograms.

You properly applied radiation weighting factors for both gamma rays (wR=1w_R = 1) and alpha particles (wR=20w_R = 20).

You executed metric prefix conversions between grays, milligrays, millirem, and microrem flawlessly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit conversion error between traditional and SI equivalent dose units

Assuming 1 rem=1 Sv1\text{ rem} = 1\text{ Sv} instead of applying 1 rem=0.01 Sv1\text{ rem} = 0.01\text{ Sv}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the 1:1 numerical equivalence between absorbed dose units (where 1 rad=0.01 Gy1\text{ rad} = 0.01\text{ Gy} and 1 rem=0.01 Sv1\text{ rem} = 0.01\text{ Sv}) with a direct unit identity, forgetting that the SI unit (sievert) is 100 times larger than the historical unit (rem).

REASONING PATH
Your ACEpath teacher’s suggested approach
Historical to SI Radiation Units
  • Both radiation unit pairs share the exact same factor of 100100: 1 Gy=100 rad1\text{ Gy} = 100\text{ rad} and 1 Sv=100 rem1\text{ Sv} = 100\text{ rem}.

  • Always substitute 1 rem=10−2 Sv1\text{ rem} = 10^{-2}\text{ Sv} (or 1 μrem=0.01 μSv1\ \mu\text{rem} = 0.01\ \mu\text{Sv}) when converting from rem to sieverts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the exact relationship between the traditional unit rem and the SI unit sievert: 1 rem=0.01 Sv=10−2 Sv1\text{ rem} = 0.01\text{ Sv} = 10^{-2}\text{ Sv}.

  2. Apply the metric prefix micro (10−610^{-6}) uniformly to both sides: 1 μrem=0.01 μSv1\ \mu\text{rem} = 0.01\ \mu\text{Sv}.

  3. Multiply the computed alpha equivalent dose: Hα=300 μrem×0.01 μSv/μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} \times 0.01\ \mu\text{Sv}/\mu\text{rem} = 3.00\ \mu\text{Sv}.

Final answer

Absorbed gamma dose =1.92 mGy= 1.92\text{ mGy}; Hγ=1.92 mSvH_\gamma = 1.92\text{ mSv}; Hα=300 μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} = 3.00\ \mu\text{Sv}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the parallel conversion scale: 1 Gy=100 rad1\text{ Gy} = 100\text{ rad} and 1 Sv=100 rem1\text{ Sv} = 100\text{ rem}.

  • Whenever converting from rem to Sv, verify that the numerical value becomes 100 times smaller because the sievert is the much larger unit.

  • Practice converting mixed-unit radiation problems, moving directly from rad to Gy before applying weighting factors to prevent unit mix-ups.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly multiplies the total energy by the single-photon energy instead of directly using the total absorbed energy to compute dose.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    E_{total\text{total}} = (4.80 ×\times 10^{-4} J\text{ J}) ×\times (140.5 ×\times 10^3 eV\text{ eV} ×\times 1.60 ×\times 10^{-19} J/eV\text{ J/eV}) = 1.079 ×\times 10^{-17} J\text{ J}   ⟹  \implies D_γ\gamma = 1.079×10−17 J0.2500 kg\frac{1.079 \times 10^{-17}\text{ J}}{0.2500\text{ kg}} = 4.32 ×\times 10^{-17} Gy\text{ Gy} = 4.32 ×\times 10^{-14} mGy\text{ mGy}

    Correct

    D_γ\gamma = Em\frac{E}{m} = 4.80×10−4 J0.2500 kg\frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 ×\times 10^{-3} Gy\text{ Gy} = 1.92 mGy\text{ mGy}_

    The problem already provides the total energy deposition as E=4.80×10−4 JE = 4.80 \times 10^{-4}\text{ J}. You did not need to multiply by the single-photon energy Eγ=140.5 keVE_\gamma = 140.5\text{ keV}, as doing so multiplies energy by energy instead of using the total deposited energy directly.

  2. Step 2

    H_γ\gamma = 1.0 ×\times (4.32 ×\times 10^{-14} mGy\text{ mGy}) = 4.32 ×\times 10^{-14} mSv\text{ mSv}_

    Correct

    H_γ\gamma = D_γ\gamma ⋅\cdot w_R = 1.92 mGy\text{ mGy} ⋅\cdot 1.0 Sv/Gy\text{ Sv/Gy} = 1.92 mSv\text{ mSv}

    You correctly multiplied your absorbed dose by wR=1.0 Sv/Gyw_R = 1.0\text{ Sv/Gy}, but the numerical value was affected by the initial error in Step 1.

  3. Step 3

    H_α\alpha = 20.0 ×\times (1.50 ×\times 10^{-2} mrad\text{ mrad}) = 0.300 mrem\text{ mrem} = 300\ \mu$$\text{rem}_$$

  4. Step 4

    H_α\alpha = 300 ×\times 0.01\ \mu$$\text{Sv} = 3.00\ \mu$$\text{Sv}_

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the tissue mass of 250.0 g250.0\text{ g} to 0.2500 kg0.2500\text{ kg}.

You used the correct relationship H=D⋅wRH = D \cdot w_R for both radiation types.

You accurately converted between traditional dose units (mrad\text{mrad}, mrem\text{mrem}, μrem\mu\text{rem}) and SI dose units (μSv\mu\text{Sv}).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unnecessary multiplication by single-particle energy

You treated the total absorbed energy as a particle count and multiplied it by the energy of an individual gamma photon.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a macroscopic total absorbed energy (EtotalE_{\text{total}} in joules) with the number of incoming particles (NN). The individual photon energy (140.5 keV140.5\text{ keV}) is background descriptive information about 99mTc^{99m}\text{Tc}; it is only needed if you are given particle count NN rather than total energy EE.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the units of the given energy
  • Absorbed dose is D=EmD = \frac{E}{m}, where EE is the total energy in joules (J\text{J}) and mm is the mass in kilograms (kg\text{kg}).

  • If the given value is already in joules (J\text{J}), it is already the total energy. Do not multiply by single-quantum energy.

When to use photon energy $E_\gamma$
  • Total energy is Etotal=N⋅EγE_{\text{total}} = N \cdot E_\gamma, where NN is dimensionless.

  • Only multiply by EγE_\gamma when given the number of emitted or absorbed photons NN.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the absorbed dose directly from the total absorbed energy and tissue mass: Dγ=4.80×10−4 J0.2500 kg=1.92×10−3 Gy=1.92 mGyD_\gamma = \frac{4.80 \times 10^{-4}\text{ J}}{0.2500\text{ kg}} = 1.92 \times 10^{-3}\text{ Gy} = 1.92\text{ mGy}.

  2. Calculate the equivalent dose of gamma rays using wR=1.0 Sv/Gyw_R = 1.0\text{ Sv/Gy}: Hγ=1.92 mGy×1.0 Sv/Gy=1.92 mSvH_\gamma = 1.92\text{ mGy} \times 1.0\text{ Sv/Gy} = 1.92\text{ mSv}.

Final answer

Absorbed gamma dose =1.92 mGy= 1.92\text{ mGy}; Hγ=1.92 mSvH_\gamma = 1.92\text{ mSv}; Hα=300 μrem=3.00 μSvH_\alpha = 300\ \mu\text{rem} = 3.00\ \mu\text{Sv}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice checking whether a radiation problem provides total energy EE directly or photon count NN.

  • Solve problems that contrast absorbed dose (DD) and equivalent dose (HH) across different radiation types.

Lock it in

Similar question

01

A thyroid gland of mass 20.0 g20.0\text{ g} absorbs 3.20×10−4 J3.20 \times 10^{-4}\text{ J} from Iodine-131 beta and gamma emissions. What is the absorbed dose in milligrays (mGy\text{mGy})?

Answer

16.0 mGy16.0\text{ mGy}. First convert the mass: m=20.0 g=0.0200 kgm = 20.0\text{ g} = 0.0200\text{ kg}. Then calculate D=Em=3.20×10−4 J0.0200 kg=1.60×10−2 Gy=16.0 mGyD = \frac{E}{m} = \frac{3.20 \times 10^{-4}\text{ J}}{0.0200\text{ kg}} = 1.60 \times 10^{-2}\text{ Gy} = 16.0\text{ mGy}.

02

An inhaled alpha-emitting aerosol delivers an absorbed dose of 4.00×10−3 rad4.00 \times 10^{-3}\text{ rad} to a lung segment. If the radiation weighting factor for alpha particles is wR=20.0w_R = 20.0, find the equivalent dose in millisieverts (mSv\text{mSv}).

Answer

0.800 mSv0.800\text{ mSv}. First convert rad to grays: D=4.00×10−3 rad×0.01 Gy/rad=4.00×10−5 Gy=0.0400 mGyD = 4.00 \times 10^{-3}\text{ rad} \times 0.01\text{ Gy/rad} = 4.00 \times 10^{-5}\text{ Gy} = 0.0400\text{ mGy}. Then calculate equivalent dose: H=D⋅wR=0.0400 mGy×20.0=0.800 mSvH = D \cdot w_R = 0.0400\text{ mGy} \times 20.0 = 0.800\text{ mSv} (or H=4.00×10−3 rad×20.0=0.0800 rem=0.800 mSvH = 4.00 \times 10^{-3}\text{ rad} \times 20.0 = 0.0800\text{ rem} = 0.800\text{ mSv}).

03

A 150 g150\text{ g} tumor receives 0.450 J0.450\text{ J} of radiation from thermal neutrons (wR=5.0w_R = 5.0) and 0.150 J0.150\text{ J} from gamma rays (wR=1.0w_R = 1.0). Calculate the total absorbed dose in grays (Gy\text{Gy}) and the total equivalent dose in sieverts (Sv\text{Sv}).

Answer

Total absorbed dose =4.00 Gy= 4.00\text{ Gy}; Total equivalent dose =16.0 Sv= 16.0\text{ Sv}. The mass is m=150 g=0.150 kgm = 150\text{ g} = 0.150\text{ kg}. Absorbed doses are Dn=0.450 J0.150 kg=3.00 GyD_n = \frac{0.450\text{ J}}{0.150\text{ kg}} = 3.00\text{ Gy} and Dγ=0.150 J0.150 kg=1.00 GyD_\gamma = \frac{0.150\text{ J}}{0.150\text{ kg}} = 1.00\text{ Gy}, giving total D=3.00+1.00=4.00 GyD = 3.00 + 1.00 = 4.00\text{ Gy}. Equivalent doses are Hn=3.00 Gy×5.0=15.0 SvH_n = 3.00\text{ Gy} \times 5.0 = 15.0\text{ Sv} and Hγ=1.00 Gy×1.0=1.00 SvH_\gamma = 1.00\text{ Gy} \times 1.0 = 1.00\text{ Sv}, giving total H=15.0+1.00=16.0 SvH = 15.0 + 1.00 = 16.0\text{ Sv}.

Loading workspace…