Resources

A student asserts: 'Because both liquids and gases can flow and take the shape of their containers, their particles must interact with essentially the same intermolecular forces and mean free paths.' To evaluate this misconception quantitatively: (a) Contrast the mechanism of shear deformation (fluidity) in liquids versus gases from a microscopic particle perspective. (b) Consider a liquid with particle diameter d=0.300 nmd = 0.300\text{ nm} and volume packing fraction ηL=43π(d/2)3NV=0.450\eta_L = \frac{\frac{4}{3}\pi (d/2)^3 N}{V} = 0.450, and a gas of the same molecules with packing fraction ηG=0.000500\eta_G = 0.000500. Calculate the ratio of the mean free path in the gas phase λG\lambda_G to that in the liquid phase λL\lambda_L, given that the mean free path scales inversely with the number density, λ≈12πd2n\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n}.

Answer and steps

Final answer

(a) In liquids, molecules are in constant contact within mutual potential wells and flow via temporary bond-breaking and localized cage-hopping; in gases, molecules travel along collision-free straight paths between brief, localized collisions with virtually no continuous intermolecular attraction. (b) λGλL=ηLηG=900\frac{\lambda_G}{\lambda_L} = \frac{\eta_L}{\eta_G} = 900.

Steps

01

Relate Packing Fraction to Number Density

Part (a): Microscopic Mechanism of Fluidity in Liquids vs. Gases

Although both liquids and gases are fluids that conform to the shape of their container, the microscopic origins of their flow (shear deformation) are fundamentally different:

  1. In liquids:
    • Molecules are densely packed and remain in constant contact, trapped within the attractive potential energy wells of their immediate neighbors (forming a transient "cage").
    • Flow occurs when an applied shear stress enables molecules to overcome activation energy barriers, momentarily breaking local intermolecular bonds and "hopping" or sliding into adjacent vacancies or neighbor cages.
    • Intermolecular attractive forces are strong and continuous, dictating cohesive behavior and viscosity.
  2. In gases:
    • Molecules are separated by large average distances compared to their molecular diameter and spend almost all their time traveling freely along straight-line trajectories.
    • Flow and shear deformation occur via the bulk drift of particles superimposed on random thermal motion, where particles move easily past one another without having to overcome persistent cohesive bonds.
    • Intermolecular forces are negligible except during brief, elastic collisions.

Part (b): Ratio of Mean Free Paths (λG/λL\lambda_G / \lambda_L)

The packing fraction η\eta represents the fraction of total volume occupied by the spherical particles: η=VmoleculesV=N⋅43π(d2)3V=n⋅(πd36)\eta = \frac{V_{\text{molecules}}}{V} = \frac{N \cdot \frac{4}{3}\pi \left(\frac{d}{2}\right)^3}{V} = n \cdot \left(\frac{\pi d^3}{6}\right) where n=NVn = \frac{N}{V} is the number density (number of particles per unit volume).

Since the particle diameter dd is identical in both states, the volume of an individual particle is constant, meaning the packing fraction is directly proportional to number density: η∝n  ⟹  nLnG=ηLηG\eta \propto n \implies \frac{n_L}{n_G} = \frac{\eta_L}{\eta_G}

02

Express the Ratio of Mean Free Paths

The mean free path λ\lambda is inversely proportional to number density nn: λ≈12πd2n  ⟹  λ∝1n\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n} \implies \lambda \propto \frac{1}{n}

Taking the ratio of the mean free path of the gas λG\lambda_G to that of the liquid λL\lambda_L: λGλL=nLnG=ηLηG\frac{\lambda_G}{\lambda_L} = \frac{n_L}{n_G} = \frac{\eta_L}{\eta_G}

03

Substitute the Numerical Values

Substitute ηL=0.450\eta_L = 0.450 and ηG=0.000500\eta_G = 0.000500: λGλL=0.4500.000500=900\frac{\lambda_G}{\lambda_L} = \frac{0.450}{0.000500} = 900

The mean free path in the gas is nearly three orders of magnitude larger than in the liquid, disproving the misconception that the two states share similar intermolecular spacing or collision regimes.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of mean free paths by assuming mean free path is directly proportional to packing fraction rather than inversely proportional to number density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Gases flow because particles move freely between collisions, while liquids flow by molecules sliding and hopping past neighboring molecules.

  2. Step 2

    η=(π6)d3n\eta = \left(\frac{\pi}{6}\right) d^3 n, so nn is proportional to η\eta.

  3. Step 3

    λGλL=ηGηL\frac{\lambda_G}{\lambda_L} = \frac{\eta_G}{\eta_L}

    Correct

    λGλL=nLnG=ηLηG\frac{\lambda_G}{\lambda_L} = \frac{n_L}{n_G} = \frac{\eta_L}{\eta_G}

    Because mean free path scales inversely with number density (λ∝1/n\lambda \propto 1/n), a higher density or packing fraction yields a shorter mean free path. Therefore, the ratio must be inverted: λGλL=ηLηG\frac{\lambda_G}{\lambda_L} = \frac{\eta_L}{\eta_G}, not ηGηL\frac{\eta_G}{\eta_L}.

  4. Step 4

    λGλL=0.0005000.450=1900≈0.00111\frac{\lambda_G}{\lambda_L} = \frac{0.000500}{0.450} = \frac{1}{900} \approx 0.00111

    Correct

    λGλL=0.4500.000500=900\frac{\lambda_G}{\lambda_L} = \frac{0.450}{0.000500} = 900

    You calculated the arithmetic correctly for your formula, but the result is inverted due to the relationship in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You provided a sound microscopic description of how fluids flow in liquid and gas phases.

You correctly derived that number density nn is directly proportional to packing fraction η\eta.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted proportionality in ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated mean free path as directly proportional to packing fraction rather than accounting for the inverse relationship between mean free path and density (λ∝1/n\lambda \propto 1/n).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check physical reasonableness of mean free path
  • Molecules in a dilute gas spend most of their time far apart, so λG\lambda_G must be much larger than λL\lambda_L.

  • Whenever comparing gas and condensed phases, verify that λgas≫λliquid\lambda_{\text{gas}} \gg \lambda_{\text{liquid}}.

Track inverse proportionalities when forming ratios
  • If y∝1xy \propto \frac{1}{x}, then y1y2=x2x1\frac{y_1}{y_2} = \frac{x_2}{x_1}.

  • Write out the proportionality λ∝1η\lambda \propto \frac{1}{\eta} before substituting values into the ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the inverse scaling of mean free path: λ≈12πd2n  ⟹  λ∝1n∝1η\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n} \implies \lambda \propto \frac{1}{n} \propto \frac{1}{\eta}.

  2. Set up the inverted ratio: λGλL=ηLηG\frac{\lambda_G}{\lambda_L} = \frac{\eta_L}{\eta_G}.

  3. Substitute the given packing fractions: λGλL=0.4500.000500=900\frac{\lambda_G}{\lambda_L} = \frac{0.450}{0.000500} = 900.

Final answer

(a) In liquids, molecules are in continuous contact and flow via cage-hopping; in gases, molecules move freely along straight lines between infrequent collisions. (b) λGλL=900\frac{\lambda_G}{\lambda_L} = 900.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the kinetic theory definition of mean free path and practice setting up ratios for inverse quantities.

  • Perform a quick order-of-magnitude physical sanity check on ratios comparing dilute and condensed phases.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the inverse relationship and takes the inverse ratio of diameters or confuses linear scaling with a cubic volume dimension, squaring the density ratio.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    In gases, fluid flow occurs through particle momentum transport across layers between collisions, whereas in liquids, molecules are tightly bound in transient cages and flow via structural rearrangements.

  2. Step 2

    Number density is n∝ηn \propto \eta.

  3. Step 3

    λ∝1/n2\lambda \propto 1/n^2

    Correct

    λ≈12πd2n  ⟹  λ∝1n\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n} \implies \lambda \propto \frac{1}{n}

    The mean free path scales inversely with the first power of number density nn, not with n2n^2.

  4. Step 4

    λGλL=(ηLηG)2  ⟹  λGλL=(0.4500.000500)2=9002=810000\frac{\lambda_G}{\lambda_L} = \left(\frac{\eta_L}{\eta_G}\right)^2 \implies \frac{\lambda_G}{\lambda_L} = \left(\frac{0.450}{0.000500}\right)^2 = 900^2 = 810000

    Correct

    λGλL=nLnG=ηLηG=0.4500.000500=900\frac{\lambda_G}{\lambda_L} = \frac{n_L}{n_G} = \frac{\eta_L}{\eta_G} = \frac{0.450}{0.000500} = 900

    This calculation followed your assumed square relationship correctly, but because λ∝1/n\lambda \propto 1/n, the ratio should not be squared.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately described the microscopic mechanism of shear deformation in both liquids and gases.

You correctly related volume packing fraction η\eta linearly to particle number density nn.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Incorrect scaling exponent

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed an inverse-square scaling λ∝1/n2\lambda \propto 1/n^2 instead of using the formula given in the problem statement, λ≈12πd2n\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n}, which shows a linear inverse relationship λ∝1/n\lambda \propto 1/n.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Variable Dependencies from Formulas
  • In λ=12πd2n\lambda = \frac{1}{\sqrt{2}\pi d^2 n}, nn appears in the denominator to the first power.

  • Check each variable's explicit exponent in the provided formula before setting up proportional scaling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that λ≈12πd2n  ⟹  λ∝1n\lambda \approx \frac{1}{\sqrt{2}\pi d^2 n} \implies \lambda \propto \frac{1}{n}.

  2. Express the ratio of mean free paths: λGλL=nLnG=ηLηG\frac{\lambda_G}{\lambda_L} = \frac{n_L}{n_G} = \frac{\eta_L}{\eta_G}.

  3. Substitute the packing fractions: λGλL=0.4500.000500=900\frac{\lambda_G}{\lambda_L} = \frac{0.450}{0.000500} = 900.

Final answer

(a) Microscopic mechanisms correctly described; (b) λGλL=900\frac{\lambda_G}{\lambda_L} = 900.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how mean free path λ\lambda depends on collision cross-section (σ=πd2\sigma = \pi d^2) and number density (nn).

  • Practice extracting proportional relationships directly from given physical formulas without squaring or cubing terms unnecessarily.

Lock it in

Similar question

01

A gas at pressure P1P_1 has a mean free path of λ1=68 nm\lambda_1 = 68\text{ nm}. If the gas is compressed isothermally to three times its initial pressure (P2=3P1P_2 = 3P_1), what is the new mean free path λ2\lambda_2?

Answer

Since P=nkBTP = n k_B T, isothermal compression gives n2=3n1n_2 = 3n_1. Mean free path scales as λ∝1/n\lambda \propto 1/n, so λ2=n1n2λ1=13(68 nm)≈22.7 nm\lambda_2 = \frac{n_1}{n_2}\lambda_1 = \frac{1}{3}(68\text{ nm}) \approx 22.7\text{ nm}.

02

Liquid water has a number density of nL≈3.34×1028 m−3n_L \approx 3.34 \times 10^{28}\text{ m}^{-3}, while water vapor at 100∘C100^\circ\text{C} and 1 atm1\text{ atm} has nG≈1.98×1025 m−3n_G \approx 1.98 \times 10^{25}\text{ m}^{-3}. Assuming effective molecular diameter is unchanged, calculate the ratio λGλL\frac{\lambda_G}{\lambda_L}.

Answer

Using the inverse relation λGλL=nLnG\frac{\lambda_G}{\lambda_L} = \frac{n_L}{n_G}, we find λGλL=3.34×10281.98×1025≈1690\frac{\lambda_G}{\lambda_L} = \frac{3.34 \times 10^{28}}{1.98 \times 10^{25}} \approx 1690.

03

Two gas samples contain identical spherical molecules. Sample A has an average interparticle spacing of LA=4.0 nmL_A = 4.0\text{ nm}, while Sample B has LB=2.0 nmL_B = 2.0\text{ nm}. Find the ratio of their mean free paths, λAλB\frac{\lambda_A}{\lambda_B}.

Answer

Number density scales with spacing as n∝L−3n \propto L^{-3}. Therefore, mean free path scales as λ∝1/n∝L3\lambda \propto 1/n \propto L^3. Taking the ratio gives λAλB=(LALB)3=(4.02.0)3=8\frac{\lambda_A}{\lambda_B} = \left(\frac{L_A}{L_B}\right)^3 = \left(\frac{4.0}{2.0}\right)^3 = 8.

Loading workspace…