Resources

A vertical open-tube manometer containing mercury with density ρHg=1.36×104 kg/m3\rho_{\text{Hg}} = 1.36 \times 10^4\text{ kg/m}^3 is connected to a sealed vacuum test chamber. In this system, the mercury level in the column open to the atmosphere is lower than the mercury level in the column connected to the chamber by a vertical height difference of Δh=18.5 cm\Delta h = 18.5\text{ cm}. Given that the local atmospheric pressure is P0=1.013×105 PaP_0 = 1.013 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the gauge pressure PgaugeP_{\text{gauge}} of the chamber relative to atmosphere and its absolute internal pressure PabsP_{\text{abs}}.

Answer and steps

Final answer

Pgauge=−2.47×104 Pa,  Pabs=7.66×104 PaP_{\text{gauge}} = -2.47 \times 10^4\text{ Pa},\; P_{\text{abs}} = 7.66 \times 10^4\text{ Pa}

Steps

01

Identify the Pressure Relationship

In a static, continuous fluid, points at the same horizontal level experience the same hydrostatic pressure.

Let the horizontal reference line be at the surface of the lower liquid level, which is in the arm open to the atmosphere:

  • In the open arm, the pressure at this reference level is simply the atmospheric pressure: Popen=P0P_{\text{open}} = P_0
  • In the arm connected to the chamber, the mercury column rises a vertical distance Δh\Delta h above this reference level. The pressure at the reference level in this column equals the pressure of the chamber plus the hydrostatic pressure exerted by the column of mercury: Pchamber arm=Pabs+ρHggΔhP_{\text{chamber arm}} = P_{\text{abs}} + \rho_{\text{Hg}} g \Delta h

Equating the pressures at this common horizontal level gives: P0=Pabs+ρHggΔhP_0 = P_{\text{abs}} + \rho_{\text{Hg}} g \Delta h


02

Calculate the Gauge Pressure

Gauge pressure is defined as the absolute pressure relative to local atmospheric pressure: Pgauge=Pabs−P0P_{\text{gauge}} = P_{\text{abs}} - P_0

Rearranging the hydrostatic balance equation: Pgauge=−ρHggΔhP_{\text{gauge}} = -\rho_{\text{Hg}} g \Delta h

Convert the height difference to standard SI units: Δh=18.5 cm=0.185 m\Delta h = 18.5\text{ cm} = 0.185\text{ m}

Substitute the given values: Pgauge=−(1.36×104 kg/m3)(9.80 m/s2)(0.185 m)P_{\text{gauge}} = -(1.36 \times 10^4\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.185\text{ m}) Pgauge≈−2.466×104 Pa=−2.47×104 PaP_{\text{gauge}} \approx -2.466 \times 10^4\text{ Pa} = -2.47 \times 10^4\text{ Pa}

Common Pitfall: Because the liquid level in the column open to the atmosphere is lower than that connected to the chamber, atmospheric pressure is greater than the chamber's internal pressure. This indicates a partial vacuum (suction), meaning the gauge pressure must be negative.


03

Calculate the Absolute Pressure

Using the definition Pabs=P0+PgaugeP_{\text{abs}} = P_0 + P_{\text{gauge}}: Pabs=1.013×105 Pa+(−2.466×104 Pa)P_{\text{abs}} = 1.013 \times 10^5\text{ Pa} + (-2.466 \times 10^4\text{ Pa}) Pabs=10.13×104 Pa−2.466×104 Pa≈7.66×104 PaP_{\text{abs}} = 10.13 \times 10^4\text{ Pa} - 2.466 \times 10^4\text{ Pa} \approx 7.66 \times 10^4\text{ Pa}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores that the open tube level is lower than the chamber tube level, assuming gauge pressure is always positive and thus adding hydrostatic pressure instead of subtracting it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δh=18.5 cm=0.185 m\Delta h = 18.5\text{ cm} = 0.185\text{ m}

  2. Step 2

    Pgauge=ρ⋅g⋅Δh=(1.36×104)(9.80)(0.185)=24656.8 Pa≈2.47×104 PaP_{\text{gauge}} = \rho \cdot g \cdot \Delta h = (1.36 \times 10^4)(9.80)(0.185) = 24656.8\text{ Pa} \approx 2.47 \times 10^4\text{ Pa}

    Correct

    Pgauge=−ρHggΔh=−(1.36×104)(9.80)(0.185)≈−2.47×104 PaP_{\text{gauge}} = -\rho_{\text{Hg}} g \Delta h = -(1.36 \times 10^4)(9.80)(0.185) \approx -2.47 \times 10^4\text{ Pa}

    Because the mercury level in the open column is lower than in the chamber column, atmospheric pressure is greater than the chamber's internal pressure (P0=Pabs+ρgΔhP_0 = P_{\text{abs}} + \rho g \Delta h). This indicates a partial vacuum, so gauge pressure must be negative: Pgauge=Pabs−P0=−ρgΔhP_{\text{gauge}} = P_{\text{abs}} - P_0 = -\rho g \Delta h.

  3. Step 3

    Pabs=P0+Pgauge=1.013×105+24656.8=125956.8 Pa≈1.26×105 PaP_{\text{abs}} = P_0 + P_{\text{gauge}} = 1.013 \times 10^5 + 24656.8 = 125956.8\text{ Pa} \approx 1.26 \times 10^5\text{ Pa}

    Correct

    Pabs=P0+Pgauge=1.013×105−2.466×104≈7.66×104 PaP_{\text{abs}} = P_0 + P_{\text{gauge}} = 1.013 \times 10^5 - 2.466 \times 10^4 \approx 7.66 \times 10^4\text{ Pa}

    You applied the correct relationship between absolute and gauge pressure (Pabs=P0+PgaugeP_{\text{abs}} = P_0 + P_{\text{gauge}}), but the positive sign from Step 2 carried over and produced an absolute pressure higher than atmospheric pressure instead of lower.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the height difference Δh=18.5 cm\Delta h = 18.5\text{ cm} into standard SI units (0.185 m0.185\text{ m}).

You accurately computed the hydrostatic column pressure magnitude ρgΔh≈2.47×104 Pa\rho g \Delta h \approx 2.47 \times 10^4\text{ Pa}.

You correctly recalled the fundamental relationship Pabs=P0+PgaugeP_{\text{abs}} = P_0 + P_{\text{gauge}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Open-Tube Manometer Gauge Pressure

You treated gauge pressure as strictly positive magnitude without checking which arm of the manometer has the lower fluid level.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that manometer gauge pressure is always given by +ρgΔh+\rho g \Delta h. When the open-to-atmosphere column is lower, the external atmosphere pushes the fluid down harder than the enclosed gas does, meaning the enclosed gas is at a partial vacuum (Pabs<P0P_{\text{abs}} < P_0) and has a negative gauge pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compare Fluid Column Levels
  • In an open U-tube manometer, the arm with the lower liquid surface experiences the higher surface pressure.

  • Check whether the open arm or the chamber arm is lower. If the open arm is lower, then P0>PchamberP_0 > P_{\text{chamber}}, which means Pgauge<0P_{\text{gauge}} < 0.

Equate Pressures at Equal Depth
  • For static continuous fluid, pressures at the same horizontal level are equal: Plower surface=Phigher surface+ρgΔhP_{\text{lower surface}} = P_{\text{higher surface}} + \rho g \Delta h.

  • Write out the hydrostatic balance before isolating PgaugeP_{\text{gauge}} rather than applying a memorized formula blindly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the pressure balance at the horizontal level of the lower mercury surface (the open arm): P0=Pabs+ρHggΔhP_0 = P_{\text{abs}} + \rho_{\text{Hg}} g \Delta h.

  2. Express gauge pressure from its definition: Pgauge=Pabs−P0=−ρHggΔhP_{\text{gauge}} = P_{\text{abs}} - P_0 = -\rho_{\text{Hg}} g \Delta h.

  3. Substitute the values: Pgauge=−(1.36×104 kg/m3)(9.80 m/s2)(0.185 m)≈−2.47×104 PaP_{\text{gauge}} = -(1.36 \times 10^4\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.185\text{ m}) \approx -2.47 \times 10^4\text{ Pa}.

  4. Compute the absolute pressure: Pabs=P0+Pgauge=1.013×105 Pa+(−2.466×104 Pa)≈7.66×104 PaP_{\text{abs}} = P_0 + P_{\text{gauge}} = 1.013 \times 10^5\text{ Pa} + (-2.466 \times 10^4\text{ Pa}) \approx 7.66 \times 10^4\text{ Pa}.

Final answer

Pgauge=−2.47×104 Pa,  Pabs=7.66×104 PaP_{\text{gauge}} = -2.47 \times 10^4\text{ Pa},\; P_{\text{abs}} = 7.66 \times 10^4\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch or visualize the U-tube and identify which side is pushed down further.

  • Write the horizontal balance equation Pleft=PrightP_{\text{left}} = P_{\text{right}} at the lower meniscus before rearranging for gauge pressure.

  • Sanity-check your absolute pressure: a vacuum test chamber must have an internal absolute pressure less than atmospheric pressure (Pabs<P0P_{\text{abs}} < P_0).

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the height difference from centimeters to meters, resulting in a hydrostatic pressure term that is too large by a factor of 100.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Chamber is at lower pressure than atmosphere since open column is lower ⟹ Pgauge=−ρ⋅g⋅ΔhP_{\text{gauge}} = -\rho \cdot g \cdot \Delta h

  2. Step 2

    Pgauge=−(1.36×104)(9.80)(18.5)=−2465680 Pa≈−2.47×106 PaP_{\text{gauge}} = -(1.36 \times 10^4)(9.80)(18.5) = -2465680\text{ Pa} \approx -2.47 \times 10^6\text{ Pa}

    Correct

    Pgauge=−(1.36×104 kg/m3)(9.80 m/s2)(0.185 m)≈−2.47×104 PaP_{\text{gauge}} = -(1.36 \times 10^4\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.185\text{ m}) \approx -2.47 \times 10^4\text{ Pa}

    You plugged in Δh=18.5\Delta h = 18.5 directly without converting 18.5 cm18.5\text{ cm} to meters (0.185 m0.185\text{ m}). In SI units, height must be in meters for ρgΔh\rho g \Delta h to yield pascals.

  3. Step 3

    Pabs=P0+Pgauge=101300−2465680=−2364380 Pa≈−2.36×106 PaP_{\text{abs}} = P_0 + P_{\text{gauge}} = 101300 - 2465680 = -2364380\text{ Pa} \approx -2.36 \times 10^6\text{ Pa}

    Correct

    Pabs=1.013×105 Pa+(−2.47×104 Pa)=7.66×104 PaP_{\text{abs}} = 1.013 \times 10^5\text{ Pa} + (-2.47 \times 10^4\text{ Pa}) = 7.66 \times 10^4\text{ Pa}

    Your formula for absolute pressure is correct, but using the unscaled gauge pressure resulted in an erroneous negative absolute pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that a lower fluid level in the open arm indicates negative gauge pressure.

You set up the correct hydrostatic relation Pgauge=−ρgΔhP_{\text{gauge}} = -\rho g \Delta h.

You used the correct relationship between absolute and gauge pressure, Pabs=P0+PgaugeP_{\text{abs}} = P_0 + P_{\text{gauge}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of SI unit conversion for length

You substituted the height difference Δh=18.5 cm\Delta h = 18.5\text{ cm} as 18.518.5 rather than converting it to meters (0.185 m0.185\text{ m}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You did not verify that all input quantities were expressed in base SI units before substituting into the hydrostatic pressure formula ΔP=ρgΔh\Delta P = \rho g \Delta h.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency
  • In fluid statics, pressure in Pascals (N/m2\text{N/m}^2) requires density in kg/m3\text{kg/m}^3, gravitational acceleration in m/s2\text{m/s}^2, and column height in m\text{m}.

  • Always convert centimeters to meters (cm×10−2=m\text{cm} \times 10^{-2} = \text{m}) before substituting into ρgh\rho g h.

Absolute Pressure Sanity Check
  • Absolute pressure PabsP_{\text{abs}} in a gas cannot be negative.

  • If your calculated PabsP_{\text{abs}} is negative, pause immediately to check for sign errors or missing unit conversions in PgaugeP_{\text{gauge}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the height difference: Δh=18.5 cm=0.185 m\Delta h = 18.5\text{ cm} = 0.185\text{ m}.

  2. Calculate gauge pressure: Pgauge=−(1.36×104)(9.80)(0.185)≈−2.47×104 PaP_{\text{gauge}} = -(1.36 \times 10^4)(9.80)(0.185) \approx -2.47 \times 10^4\text{ Pa}.

  3. Calculate absolute pressure: Pabs=P0+Pgauge=1.013×105 Pa−2.47×104 Pa=7.66×104 PaP_{\text{abs}} = P_0 + P_{\text{gauge}} = 1.013 \times 10^5\text{ Pa} - 2.47 \times 10^4\text{ Pa} = 7.66 \times 10^4\text{ Pa}.

Final answer

Pgauge=−2.47×104 Pa,  Pabs=7.66×104 PaP_{\text{gauge}} = -2.47 \times 10^4\text{ Pa},\; P_{\text{abs}} = 7.66 \times 10^4\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the units alongside numbers in your substitution line to catch unit mismatches early.

  • Use the physical limit Pabs≥0P_{\text{abs}} \ge 0 as an automatic check whenever working with vacuum or negative gauge pressures.

Lock it in

Similar question

01

An open-tube mercury manometer (ρ=1.36×104 kg/m3\rho = 1.36 \times 10^4\text{ kg/m}^3) is attached to a flask. The mercury level in the arm open to the atmosphere (P0=1.00×105 PaP_0 = 1.00 \times 10^5\text{ Pa}) is 12.0 cm12.0\text{ cm} lower than the level in the arm connected to the flask. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the gauge pressure and absolute pressure inside the flask.

Answer

Pgauge=−1.60×104 Pa,  Pabs=8.40×104 PaP_{\text{gauge}} = -1.60 \times 10^4\text{ Pa},\; P_{\text{abs}} = 8.40 \times 10^4\text{ Pa}. Key steps: Because the open arm is lower, P0=Pflask+ρgΔhP_0 = P_{\text{flask}} + \rho g \Delta h. Thus Pgauge=−ρgΔh=−(1.36×104)(9.80)(0.120)≈−1.60×104 PaP_{\text{gauge}} = -\rho g \Delta h = -(1.36 \times 10^4)(9.80)(0.120) \approx -1.60 \times 10^4\text{ Pa}, and Pabs=1.00×105−1.60×104=8.40×104 PaP_{\text{abs}} = 1.00 \times 10^5 - 1.60 \times 10^4 = 8.40 \times 10^4\text{ Pa}.

02

A U-tube manometer filled with water (ρ=1.00×103 kg/m3\rho = 1.00 \times 10^3\text{ kg/m}^3) connects a ventilation duct to the outside atmosphere (P0=1.013×105 PaP_0 = 1.013 \times 10^5\text{ Pa}). The water level in the duct arm is 25.0 cm25.0\text{ cm} higher than in the open arm. Determine whether the duct is under positive or negative gauge pressure, and calculate its absolute pressure using g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

Negative gauge pressure; Pabs=9.89×104 PaP_{\text{abs}} = 9.89 \times 10^4\text{ Pa}. Key steps: The open arm has the lower water level, so P0>PductP_0 > P_{\text{duct}}, confirming negative gauge pressure (suction). Pgauge=−ρgΔh=−(1000)(9.80)(0.250)=−2450 PaP_{\text{gauge}} = -\rho g \Delta h = -(1000)(9.80)(0.250) = -2450\text{ Pa}. Then Pabs=101300−2450=98850 Pa≈9.89×104 PaP_{\text{abs}} = 101300 - 2450 = 98850\text{ Pa} \approx 9.89 \times 10^4\text{ Pa}.

03

A closed gas tank is connected to a two-fluid manometer containing oil (ρoil=800 kg/m3\rho_{\text{oil}} = 800\text{ kg/m}^3) and mercury (ρHg=1.36×104 kg/m3\rho_{\text{Hg}} = 1.36 \times 10^4\text{ kg/m}^3). The tank connects to the oil column, which rests above mercury in the left arm. In the open right arm, the mercury surface is 10.0 cm10.0\text{ cm} lower than the oil-mercury interface in the left arm, while the oil column has a height of 15.0 cm15.0\text{ cm}. Given P0=1.01×105 PaP_0 = 1.01 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2, find the absolute pressure in the tank.

Answer

Pabs=8.65×104 PaP_{\text{abs}} = 8.65 \times 10^4\text{ Pa}. Key steps: Choose a reference level at the mercury surface in the open right arm. At this level, Pright=P0=1.01×105 PaP_{\text{right}} = P_0 = 1.01 \times 10^5\text{ Pa}. In the left arm at the same level: Pleft=Ptank+ρoilghoil+ρHgghHgP_{\text{left}} = P_{\text{tank}} + \rho_{\text{oil}} g h_{\text{oil}} + \rho_{\text{Hg}} g h_{\text{Hg}}. Equating Pleft=PrightP_{\text{left}} = P_{\text{right}} gives Ptank=P0−g(ρoilhoil+ρHghHg)=1.01×105−9.80(800×0.150+13600×0.100)=1.01×105−14464.8≈8.65×104 PaP_{\text{tank}} = P_0 - g(\rho_{\text{oil}} h_{\text{oil}} + \rho_{\text{Hg}} h_{\text{Hg}}) = 1.01 \times 10^5 - 9.80(800 \times 0.150 + 13600 \times 0.100) = 1.01 \times 10^5 - 14464.8 \approx 8.65 \times 10^4\text{ Pa}.

Loading workspace…