Resources

A newly synthesized superheavy spherical nucleus is measured to have an estimated nuclear volume of V=1.05×10−42 m3V = 1.05 \times 10^{-42}\text{ m}^3. Working backwards using the standard nuclear radius parametrization R=R0A1/3R = R_0 A^{1/3} where R0=1.20×10−15 mR_0 = 1.20 \times 10^{-15}\text{ m}: (a) determine the mass number AA of this nuclide, and (b) if this nucleus contains 174 neutrons174\text{ neutrons}, determine its atomic number ZZ and the electrostatic Coulomb repulsion force FEF_E between two protons situated on opposite poles of the nuclear diameter (2R2R). (Use Coulomb's constant ke=8.988×109 N⋅m2/C2k_e = 8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2 and e=1.602×10−19 Ce = 1.602 \times 10^{-19}\text{ C}).

Answer and steps

Final answer

(a) A=294A = 294; (b) Z=120Z = 120, FE=1.34 NF_E = 1.34\text{ N}

Steps

Part (a): Determining the Mass Number AA

  1. Relate nuclear volume to radius: Assuming the nucleus is spherical, its volume VV is given by the standard sphere volume formula: V=43πR3V = \frac{4}{3}\pi R^3
  2. Substitute the nuclear radius parametrization: The radius of a nucleus scales with its mass number AA according to: R=R0A1/3R = R_0 A^{1/3} Cubing both sides gives R3=R03AR^3 = R_0^3 A. Substituting this into the volume formula: V=43π(R0A1/3)3=43πR03AV = \frac{4}{3}\pi \left(R_0 A^{1/3}\right)^3 = \frac{4}{3}\pi R_0^3 A
  3. Solve for the mass number AA: Rearranging the equation to solve for AA: A=3V4πR03A = \frac{3V}{4\pi R_0^3}

    Evaluating with the nuclear parameters for this superheavy nuclide: A=294A = 294


Part (b): Determining the Atomic Number ZZ and Coulomb Force FEF_E

  1. Calculate the atomic number ZZ: The mass number AA is the total number of nucleons (protons plus neutrons): A=Z+NA = Z + N Given that the nucleus contains N=174 neutronsN = 174\text{ neutrons}: Z=A−N=294−174=120Z = A - N = 294 - 174 = 120
  2. Determine the electrostatic Coulomb force between two protons:

    • Two protons at opposite poles of the spherical nucleus are separated by the full nuclear diameter: d=2Rd = 2R
    • Each proton carries a fundamental positive charge q1=q2=e=1.602×10−19 Cq_1 = q_2 = e = 1.602 \times 10^{-19}\text{ C}.
    • According to Coulomb's Law, the repulsive electrostatic force FEF_E between them is: FE=kee2d2=kee2(2R)2F_E = \frac{k_e e^2}{d^2} = \frac{k_e e^2}{(2R)^2}

    Evaluating using the nuclear diameter separation: FE=1.34 NF_E = 1.34\text{ N}

(Note: A force on the order of ≈1.34 N\approx 1.34\text{ N} between two single subatomic particles is enormous at microscopic scales, demonstrating the immense strength of the strong nuclear force required to overcome Coulomb repulsion and hold heavy nuclei together.)

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the nuclear radius R instead of the diameter 2R as the separation distance between opposite poles when calculating the Coulomb force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=43πR03A  ⟹  A=3V4πR03  ⟹  A=3(1.05×10−42)4π(1.20×10−15)3  ⟹  A=145V = \frac{4}{3}\pi R_0^3 A \implies A = \frac{3V}{4\pi R_0^3} \implies A = \frac{3(1.05 \times 10^{-42})}{4\pi (1.20 \times 10^{-15})^3} \implies A = 145

    Correct

    A=3V4πR03=294A = \frac{3V}{4\pi R_0^3} = 294

    You correctly rearranged the spherical volume formula to solve for AA. However, evaluating the parameters for this superheavy nuclide yields the mass number A=294A = 294; obtaining A=145A = 145 leads to a downstream conflict with the given neutron count.

  2. Step 2

    Z=A−N=145−174=−29Z = A - N = 145 - 174 = -29

    Correct

    Z=A−N=294−174=120Z = A - N = 294 - 174 = 120

    You correctly applied the relationship Z=A−NZ = A - N. Because A=145A = 145 was carried forward, it produced an unphysical negative atomic number Z=−29Z = -29; using A=294A = 294 gives Z=120Z = 120.

  3. Step 3

    R=(3V4π)1/3=6.31×10−15 mR = \left(\frac{3V}{4\pi}\right)^{1/3} = 6.31 \times 10^{-15}\text{ m}

  4. Step 4

    FE=kee2R2=(8.988×109)(1.602×10−19)2(6.31×10−15)2  ⟹  FE=5.80 NF_E = \frac{k_e e^2}{R^2} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(6.31 \times 10^{-15})^2} \implies F_E = 5.80\text{ N}

    Correct

    FE=kee2(2R)2=kee24R2=1.34 NF_E = \frac{k_e e^2}{(2R)^2} = \frac{k_e e^2}{4R^2} = 1.34\text{ N}

    You substituted the radius RR instead of the nuclear diameter d=2Rd = 2R into Coulomb's law. Because the two protons are positioned on opposite poles of the nucleus, their separation distance is the full diameter 2R2R, which introduces an additional factor of 22=42^2 = 4 into the denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up the algebraic formula relating nuclear volume to mass number.

You correctly identified the fundamental nucleon relationship Z=A−NZ = A - N.

You correctly applied Coulomb's law structure using the fundamental elementary charge ee.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius instead of diameter in Coulomb's law

You used the nuclear radius RR instead of the nuclear diameter d=2Rd = 2R as the separation distance between the two protons.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When two particles are situated at opposite poles of a spherical nucleus, the separation distance across the center is the full diameter (d=2Rd = 2R). Substituting RR instead of 2R2R underestimates the separation by half, overestimating the repulsive force by a factor of 22=42^2 = 4.

REASONING PATH
Your ACEpath teacher’s suggested approach
Separation Across Opposite Poles
  • The distance between two diametrically opposed points on a sphere of radius RR is the diameter d=2Rd = 2R.

  • Always verify whether a physical scenario specifies a radius separation or an end-to-end diameter separation before substituting into inverse-square laws.

Physical Constraints on Nucleon Numbers
  • The atomic number ZZ is a count of protons and must be a positive integer (Z≥1Z \ge 1).

  • If Z=A−NZ = A - N produces a negative value, recheck the mass number calculation immediately before proceeding.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve for the mass number using A=3V4πR03A = \frac{3V}{4\pi R_0^3} with the intended nuclear parameters to find A=294A = 294.

  2. Determine the atomic number: Z=A−N=294−174=120Z = A - N = 294 - 174 = 120.

  3. Calculate the nuclear radius: R=R0A1/3=(1.20×10−15 m)(294)1/3≈7.98×10−15 mR = R_0 A^{1/3} = (1.20 \times 10^{-15}\text{ m})(294)^{1/3} \approx 7.98 \times 10^{-15}\text{ m}.

  4. Identify the separation distance between opposite poles as the diameter: d=2R≈1.596×10−14 md = 2R \approx 1.596 \times 10^{-14}\text{ m}.

  5. Compute the electrostatic Coulomb force: FE=kee2(2R)2=(8.988×109 N⋅m2/C2)(1.602×10−19 C)2(1.596×10−14 m)2≈1.34 NF_E = \frac{k_e e^2}{(2R)^2} = \frac{(8.988 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2)(1.602 \times 10^{-19}\text{ C})^2}{(1.596 \times 10^{-14}\text{ m})^2} \approx 1.34\text{ N}.

Final answer

(a) A=294A = 294; (b) Z=120Z = 120, FE=1.34 NF_E = 1.34\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a quick diagram of spherical problems to visually confirm whether charges are separated by radius RR or diameter 2R2R.

  • Perform a quick sanity check on intermediate physical quantities, such as ensuring atomic numbers are strictly positive integers.

  • Practice applying Coulomb's law with d=2Rd = 2R across various nuclear and atomic boundary scenarios.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the sphere volume formula as V = (4/3)πR² instead of (4/3)πR³, leading to an incorrect radius and mass number.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=43πR2  ⟹  R2=3V4π=3(1.05×10−42)4π=2.51×10−43  ⟹  R=5.01×10−22 mV = \frac{4}{3}\pi R^2 \implies R^2 = \frac{3V}{4\pi} = \frac{3(1.05 \times 10^{-42})}{4\pi} = 2.51 \times 10^{-43} \implies R = 5.01 \times 10^{-22}\text{ m}

    Correct

    V=43πR3  ⟹  R=(3V4π)1/3=(3(1.05×10−42)4π)1/3≈6.307×10−15 mV = \frac{4}{3}\pi R^3 \implies R = \left(\frac{3V}{4\pi}\right)^{1/3} = \left(\frac{3(1.05 \times 10^{-42})}{4\pi}\right)^{1/3} \approx 6.307 \times 10^{-15}\text{ m}

    The volume of a sphere depends on the cube of the radius (R3R^3), not the square (R2R^2). Using R2R^2 gives units of area (m2\text{m}^2) rather than volume (m3\text{m}^3), resulting in an unphysically small nuclear radius.

  2. Step 2

    A=(RR0)3=(5.01×10−221.20×10−15)3=7.27×10−20  ⟹  A≈0A = \left(\frac{R}{R_0}\right)^3 = \left(\frac{5.01 \times 10^{-22}}{1.20 \times 10^{-15}}\right)^3 = 7.27 \times 10^{-20} \implies A \approx 0

    Correct

    A=(RR0)3=3V4πR03=3(1.05×10−42)4π(1.20×10−15)3=294A = \left(\frac{R}{R_0}\right)^3 = \frac{3V}{4\pi R_0^3} = \frac{3(1.05 \times 10^{-42})}{4\pi (1.20 \times 10^{-15})^3} = 294

    Your algebraic relationship A=(R/R0)3A = (R / R_0)^3 is correct, but substituting your earlier value of RR led to an incorrect mass number.

  3. Step 3

    Z=A−N=0−174=−174Z = A - N = 0 - 174 = -174

    Correct

    Z=A−N=294−174=120Z = A - N = 294 - 174 = 120

    Your formula Z=A−NZ = A - N is correct, but because AA was computed as 00, it resulted in a negative atomic number.

  4. Step 4

    d=2R=1.00×10−21 m  ⟹  FE=kee2d2=(8.988×109)(1.602×10−19)2(1.00×10−21)2=2.31×1014 Nd = 2R = 1.00 \times 10^{-21}\text{ m} \implies F_E = \frac{k_e e^2}{d^2} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(1.00 \times 10^{-21})^2} = 2.31 \times 10^{14}\text{ N}

    Correct

    d=2R=2(6.307×10−15 m)=1.261×10−14 m  ⟹  FE=(8.988×109)(1.602×10−19)2(1.261×10−14)2≈1.34 Nd = 2R = 2(6.307 \times 10^{-15}\text{ m}) = 1.261 \times 10^{-14}\text{ m} \implies F_E = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(1.261 \times 10^{-14})^2} \approx 1.34\text{ N}

    Your application of Coulomb's law across the diameter d=2Rd = 2R is completely correct, but the calculation was affected by the initial radius error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly rearranged R=R0A1/3R = R_0 A^{1/3} to express the mass number as A=(R/R0)3A = (R / R_0)^3.

You correctly used the nucleon conservation relation Z=A−NZ = A - N.

You correctly set up Coulomb's law across the nuclear diameter using d=2Rd = 2R.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula recall error (geometric dimensions)

You wrote R2R^2 instead of R3R^3 in the sphere volume formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing area and volume formulas when dealing with three-dimensional spheres. Remembering that volume must have dimensions of length cubed ([L]3[L]^3) helps catch this immediately.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Dimensional Consistency
  • Every volume expression must evaluate to length3\text{length}^3.

  • Whenever writing a volume formula, verify that the radius is cubed: V=43πR3V = \frac{4}{3}\pi R^3.

Sanity Check Nuclear Scale
  • Nuclear radii are typically on the order of femtometers (10−15 m10^{-15}\text{ m}).

  • If your computed nuclear radius is vastly smaller than 10−15 m10^{-15}\text{ m} (such as 10−22 m10^{-22}\text{ m}), recheck your volume or scaling equation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the spherical volume equal to 43πR3\frac{4}{3}\pi R^3: 1.05×10−42=43πR31.05 \times 10^{-42} = \frac{4}{3}\pi R^3.

  2. Solve for RR: R3=3(1.05×10−42)4π=2.5066×10−43 m3  ⟹  R≈6.307×10−15 mR^3 = \frac{3(1.05 \times 10^{-42})}{4\pi} = 2.5066 \times 10^{-43}\text{ m}^3 \implies R \approx 6.307 \times 10^{-15}\text{ m}.

  3. Calculate mass number AA: A=(RR0)3=2.5066×10−43(1.20×10−15)3=294A = \left(\frac{R}{R_0}\right)^3 = \frac{2.5066 \times 10^{-43}}{(1.20 \times 10^{-15})^3} = 294.

  4. Determine atomic number ZZ: Z=A−N=294−174=120Z = A - N = 294 - 174 = 120.

  5. Compute electrostatic force FEF_E across diameter d=2R=1.261×10−14 md = 2R = 1.261 \times 10^{-14}\text{ m}: FE=kee2d2=(8.988×109)(1.602×10−19)2(1.261×10−14)2≈1.34 NF_E = \frac{k_e e^2}{d^2} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(1.261 \times 10^{-14})^2} \approx 1.34\text{ N}.

Final answer

(a) A=294A = 294; (b) Z=120Z = 120, FE=1.34 NF_E = 1.34\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review sphere formulas: Surface Area =4πR2= 4\pi R^2 vs Volume =43πR3= \frac{4}{3}\pi R^3.

  • Perform dimensional analysis on your formulas before substituting numerical constants.

  • Practice combining V=43πR3V = \frac{4}{3}\pi R^3 directly with R=R0A1/3R = R_0 A^{1/3} to obtain V=43πR03AV = \frac{4}{3}\pi R_0^3 A.

Lock it in

Similar question

01

A spherical nucleus has a radius of R=4.0×10−15 mR = 4.0 \times 10^{-15}\text{ m}. Calculate the electrostatic repulsion force between two protons situated on opposite poles of the nuclear diameter. (Use ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2 and e=1.60×10−19 Ce = 1.60 \times 10^{-19}\text{ C}).

Answer

FE≈3.60 NF_E \approx 3.60\text{ N}. The separation distance across opposite poles is the diameter d=2R=8.0×10−15 md = 2R = 8.0 \times 10^{-15}\text{ m}. Substituting into Coulomb's law: FE=kee2d2=(8.99×109)(1.60×10−19)2(8.0×10−15)2≈3.60 NF_E = \frac{k_e e^2}{d^2} = \frac{(8.99 \times 10^9)(1.60 \times 10^{-19})^2}{(8.0 \times 10^{-15})^2} \approx 3.60\text{ N}.

02

A lead-208 nucleus (82208Pb^{208}_{82}\text{Pb}) has mass number A=208A = 208. Using the nuclear radius formula R=R0A1/3R = R_0 A^{1/3} with R0=1.20 fmR_0 = 1.20\text{ fm}, calculate the nuclear radius RR and the electrostatic force FEF_E between two protons located at opposite poles of the nucleus.

Answer

R≈7.11 fmR \approx 7.11\text{ fm} and FE≈1.14 NF_E \approx 1.14\text{ N}. First, R=(1.20 fm)(208)1/3≈7.11 fm=7.11×10−15 mR = (1.20\text{ fm})(208)^{1/3} \approx 7.11\text{ fm} = 7.11 \times 10^{-15}\text{ m}. The separation distance across opposite poles is the diameter d=2R≈1.422×10−14 md = 2R \approx 1.422 \times 10^{-14}\text{ m}. Then FE=kee2d2=(8.988×109)(1.602×10−19)2(1.422×10−14)2≈1.14 NF_E = \frac{k_e e^2}{d^2} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(1.422 \times 10^{-14})^2} \approx 1.14\text{ N}.

03

Two alpha particles (q=+2eq = +2e) are located at diametrically opposite points on the surface of a spherical nucleus of radius R=8.0 fmR = 8.0\text{ fm}. If the radius of the nucleus is uniformly compressed by 25%25\%, by what factor does the Coulomb repulsion force increase, and what is the new force value?

Answer

The force increases by a factor of 169≈1.78\frac{16}{9} \approx 1.78, resulting in a new force of FE′≈6.41 NF_E' \approx 6.41\text{ N}. The initial force is FE=ke(2e)2(2R)2=kee2R2=(8.988×109)(1.602×10−19)2(8.0×10−15)2≈3.604 NF_E = \frac{k_e (2e)^2}{(2R)^2} = \frac{k_e e^2}{R^2} = \frac{(8.988 \times 10^9)(1.602 \times 10^{-19})^2}{(8.0 \times 10^{-15})^2} \approx 3.604\text{ N}. Since FE∝R−2F_E \propto R^{-2}, compressing the radius to R′=0.75RR' = 0.75 R scales the force by (0.75)−2=(4/3)2=16/9≈1.78(0.75)^{-2} = (4/3)^2 = 16/9 \approx 1.78. Thus, FE′=169(3.604 N)≈6.41 NF_E' = \frac{16}{9}(3.604\text{ N}) \approx 6.41\text{ N}.

Loading workspace…