Resources

A small projectile of mass m1=25.0 gm_1 = 25.0\text{ g} is launched horizontally at a velocity of v1i=1.80×102 km/hv_{1i} = 1.80\times 10^2\text{ km/h} toward a stationary target block of mass m2=475 gm_2 = 475\text{ g} resting on a frictionless horizontal support. The collision is strictly head-on. Upon impact, the projectile sticks to the block. Convert all given initial values into standard SI units (kgkg and m/sm/s), determine the final combined speed vfv_f of the composite body in m/s\text{m/s}, and find the absolute loss in kinetic energy ∣ΔK∣|\Delta K| in joules (J\text{J}).

Answer and steps

Final answer

v1i=50.0 m/sv_{1i} = 50.0\text{ m/s}, m1=0.0250 kgm_1 = 0.0250\text{ kg}, m2=0.475 kgm_2 = 0.475\text{ kg}; vf=2.50 m/sv_f = 2.50\text{ m/s}; ∣ΔK∣=29.7 J|\Delta K| = 29.7\text{ J}.

Steps

01

Convert Given Values into Standard SI Units

To use standard mechanical equations, mass must be expressed in kilograms (kg\text{kg}) and velocity in meters per second (m/s\text{m/s}):

  • Mass of the projectile (m1m_1): m1=25.0 g×1 kg1000 g=0.0250 kgm_1 = 25.0\text{ g} \times \frac{1\text{ kg}}{1000\text{ g}} = 0.0250\text{ kg}
  • Mass of the target block (m2m_2): m2=475 g×1 kg1000 g=0.475 kgm_2 = 475\text{ g} \times \frac{1\text{ kg}}{1000\text{ g}} = 0.475\text{ kg}
  • Initial velocity of the projectile (v1iv_{1i}): v1i=1.80×102 km/h=180 km/h×1 m/s3.6 km/h=50.0 m/sv_{1i} = 1.80\times 10^2\text{ km/h} = 180\text{ km/h} \times \frac{1\text{ m/s}}{3.6\text{ km/h}} = 50.0\text{ m/s}
  • Initial velocity of the stationary block (v2iv_{2i}): v2i=0 m/sv_{2i} = 0\text{ m/s}

02

Determine the Final Speed Using Conservation of Momentum

Because the horizontal surface is frictionless and no net external horizontal force acts on the system during the collision, total horizontal linear momentum is conserved:

pi=pfp_i = p_f

When two objects stick together upon impact, the interaction is a perfectly inelastic collision. The two bodies move together with a single common final velocity vfv_f:

m1v1i+m2v2i=(m1+m2)vfm_1 v_{1i} + m_2 v_{2i} = (m_1 + m_2)v_f

Substitute the known values into the equation:

(0.0250 kg)(50.0 m/s)+(0.475 kg)(0)=(0.0250 kg+0.475 kg)vf(0.0250\text{ kg})(50.0\text{ m/s}) + (0.475\text{ kg})(0) = (0.0250\text{ kg} + 0.475\text{ kg})v_f

1.25 kg⋅m/s=(0.500 kg)vf1.25\text{ kg}\cdot\text{m/s} = (0.500\text{ kg})v_f

Solve for vfv_f:

vf=1.25 kg⋅m/s0.500 kg=2.50 m/sv_f = \frac{1.25\text{ kg}\cdot\text{m/s}}{0.500\text{ kg}} = 2.50\text{ m/s}


03

Calculate the Loss in Kinetic Energy

In an inelastic collision, kinetic energy is not conserved; part of it transforms into internal energy, heat, and permanent deformation.

  1. Initial kinetic energy (KiK_i): Ki=12m1v1i2+12m2v2i2K_i = \frac{1}{2}m_1 v_{1i}^2 + \frac{1}{2}m_2 v_{2i}^2 Ki=12(0.0250 kg)(50.0 m/s)2+0=12(0.0250)(2500)=31.25 JK_i = \frac{1}{2}(0.0250\text{ kg})(50.0\text{ m/s})^2 + 0 = \frac{1}{2}(0.0250)(2500) = 31.25\text{ J}
  2. Final kinetic energy (KfK_f): Kf=12(m1+m2)vf2K_f = \frac{1}{2}(m_1 + m_2)v_f^2 Kf=12(0.500 kg)(2.50 m/s)2=12(0.500)(6.25)=1.5625 JK_f = \frac{1}{2}(0.500\text{ kg})(2.50\text{ m/s})^2 = \frac{1}{2}(0.500)(6.25) = 1.5625\text{ J}
  3. Absolute loss in kinetic energy (∣ΔK∣|\Delta K|): ∣ΔK∣=Ki−Kf=31.25 J−1.5625 J=29.6875 J≈29.7 J|\Delta K| = K_i - K_f = 31.25\text{ J} - 1.5625\text{ J} = 29.6875\text{ J} \approx 29.7\text{ J}

Common Pitfall: Do not confuse conservation of momentum with conservation of kinetic energy. Momentum is strictly conserved in every isolated collision, but mechanical kinetic energy is conserved only in elastic collisions. When bodies stick together, the collision is completely inelastic, resulting in maximum loss of kinetic energy to other forms.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to include the projectile's mass in the combined composite body after collision, dividing only by the target block mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=0.0250 kgm_1 = 0.0250\text{ kg}, m2=0.475 kgm_2 = 0.475\text{ kg}, v1i=180/3.6=50.0 m/sv_{1i} = 180 / 3.6 = 50.0\text{ m/s}

  2. Step 2

    m1⋅v1i=m2⋅vf  ⟹  vf=0.0250⋅50.00.475=1.250.475≈2.63 m/sm_1 \cdot v_{1i} = m_2 \cdot v_f \implies v_f = \frac{0.0250 \cdot 50.0}{0.475} = \frac{1.25}{0.475} \approx 2.63\text{ m/s}

    Correct

    m1v1i=(m1+m2)vf  ⟹  vf=1.25 kg⋅m/s0.0250 kg+0.475 kg=1.250.500=2.50 m/sm_1 v_{1i} = (m_1 + m_2) v_f \implies v_f = \frac{1.25\text{ kg}\cdot\text{m/s}}{0.0250\text{ kg} + 0.475\text{ kg}} = \frac{1.25}{0.500} = 2.50\text{ m/s}

    Because the projectile embeds into the target block, the moving object after the collision is the combined system of mass m1+m2m_1 + m_2, not just the block m2m_2.

  3. Step 3

    Ki=0.5⋅0.0250⋅50.02=31.25 J  ⟹  Kf=0.5⋅0.475⋅2.632≈1.64 J  ⟹  ∣ΔK∣=31.25−1.64=29.61 JK_i = 0.5 \cdot 0.0250 \cdot 50.0^2 = 31.25\text{ J} \implies K_f = 0.5 \cdot 0.475 \cdot 2.63^2 \approx 1.64\text{ J} \implies |\Delta K| = 31.25 - 1.64 = 29.61\text{ J}

    Correct

    Ki=12m1v1i2=31.25 J  ⟹  Kf=12(m1+m2)vf2=12(0.500)(2.50)2=1.5625 J  ⟹  ∣ΔK∣=31.25−1.5625≈29.7 JK_i = \frac{1}{2}m_1 v_{1i}^2 = 31.25\text{ J} \implies K_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.500)(2.50)^2 = 1.5625\text{ J} \implies |\Delta K| = 31.25 - 1.5625 \approx 29.7\text{ J}

    Your initial kinetic energy calculation was accurate, but your final kinetic energy and energy loss were affected by omitting m1m_1 and using the resulting inaccurate final velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all masses and speeds into standard SI units accurately.

You recognized that linear momentum is conserved in the horizontal direction during the collision.

You correctly calculated the initial kinetic energy of the projectile.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted projectile mass in perfectly inelastic collision

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the post-collision moving mass as solely the target block (m2m_2) instead of the combined mass of the stuck projectile and block (m1+m2m_1 + m_2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for all mass after collision
  • When two objects stick together upon impact (a perfectly inelastic collision), their combined mass is m1+m2m_1 + m_2.

  • Write the final momentum explicitly as pf=(m1+m2)vfp_f = (m_1 + m_2)v_f before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply conservation of horizontal momentum for two objects that stick together: m1v1i=(m1+m2)vfm_1 v_{1i} = (m_1 + m_2)v_f.

  2. Substitute the total mass (0.0250 kg+0.475 kg)=0.500 kg(0.0250\text{ kg} + 0.475\text{ kg}) = 0.500\text{ kg}: vf=1.25 kg⋅m/s0.500 kg=2.50 m/sv_f = \frac{1.25\text{ kg}\cdot\text{m/s}}{0.500\text{ kg}} = 2.50\text{ m/s}.

  3. Calculate final kinetic energy using the total combined mass: Kf=12(m1+m2)vf2=12(0.500 kg)(2.50 m/s)2=1.5625 JK_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.500\text{ kg})(2.50\text{ m/s})^2 = 1.5625\text{ J}.

  4. Compute the kinetic energy loss: ∣ΔK∣=Ki−Kf=31.25 J−1.5625 J=29.6875 J≈29.7 J|\Delta K| = K_i - K_f = 31.25\text{ J} - 1.5625\text{ J} = 29.6875\text{ J} \approx 29.7\text{ J}.

Final answer

vf=2.50 m/sv_f = 2.50\text{ m/s}, ∣ΔK∣=29.7 J|\Delta K| = 29.7\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever a problem states that two objects stick together, highlight the word 'stick' and immediately write mf=m1+m2m_f = m_1 + m_2.

  • Practice identifying the system mass before and after collision to ensure no mass disappears from the equations.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers the kinetic energy formula by omitting the square on velocity, computing kinetic energy as (1/2)*m*v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m1=0.0250 kg  ⟹  m2=0.475 kg  ⟹  v1i=50.0 m/sm_1 = 0.0250\text{ kg} \implies m_2 = 0.475\text{ kg} \implies v_{1i} = 50.0\text{ m/s}

  2. Step 2

    m1v1i=(m1+m2)vf  ⟹  vf=1.250.500=2.50 m/sm_1 v_{1i} = (m_1 + m_2)v_f \implies v_f = \frac{1.25}{0.500} = 2.50\text{ m/s}

  3. Step 3

    Ki=0.5⋅m1⋅v1i=0.625 J  ⟹  Kf=0.5(m1+m2)vf=0.625 J  ⟹  ∣ΔK∣=0.625 J−0.625 J=0 JK_i = 0.5 \cdot m_1 \cdot v_{1i} = 0.625\text{ J} \implies K_f = 0.5(m_1 + m_2)v_f = 0.625\text{ J} \implies |\Delta K| = 0.625\text{ J} - 0.625\text{ J} = 0\text{ J}

    Correct

    Ki=12m1v1i2=31.25 J  ⟹  Kf=12(m1+m2)vf2=1.5625 J  ⟹  ∣ΔK∣=29.7 JK_i = \frac{1}{2}m_1 v_{1i}^2 = 31.25\text{ J} \implies K_f = \frac{1}{2}(m_1 + m_2)v_f^2 = 1.5625\text{ J} \implies |\Delta K| = 29.7\text{ J}

    You wrote the formula for kinetic energy as 12mv\frac{1}{2}mv rather than 12mv2\frac{1}{2}mv^2. Because you effectively computed 12p\frac{1}{2}p, and momentum pp is conserved, your calculated initial and final values were identical.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all given initial quantities into standard SI units accurately.

You recognized that total linear momentum is conserved in this horizontal collision.

You correctly solved for the final combined velocity of the projectile and block.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Error: Missing Square in Kinetic Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the linear expression 12mv\frac{1}{2}mv instead of the quadratic form K=12mv2K = \frac{1}{2}mv^2. This formula confusion equates kinetic energy to half of linear momentum (12p\frac{1}{2}p), which will always falsely show zero kinetic energy loss whenever momentum is conserved.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Formula and Dimensions
  • Kinetic energy has dimensions of mass times speed squared: [K]=kg⋅m2/s2=J[K] = \text{kg}\cdot\text{m}^2/\text{s}^2 = \text{J}.

  • Always write K=12mv2K = \frac{1}{2}mv^2 and verify that the velocity term is squared before entering numbers.

Physical Reality of Inelastic Collisions
  • In any collision where objects stick together (completely inelastic), mechanical kinetic energy must decrease (Kf<KiK_f < K_i).

  • If you obtain ΔK=0\Delta K = 0 for objects sticking together, immediately re-check whether velocity was squared.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Ki=12m1v1i2=12(0.0250 kg)(50.0 m/s)2=31.25 JK_i = \frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}(0.0250\text{ kg})(50.0\text{ m/s})^2 = 31.25\text{ J}

  2. Kf=12(m1+m2)vf2=12(0.500 kg)(2.50 m/s)2=1.5625 JK_f = \frac{1}{2}(m_1 + m_2)v_f^2 = \frac{1}{2}(0.500\text{ kg})(2.50\text{ m/s})^2 = 1.5625\text{ J}

  3. ∣ΔK∣=Ki−Kf=31.25 J−1.5625 J=29.6875 J≈29.7 J|\Delta K| = K_i - K_f = 31.25\text{ J} - 1.5625\text{ J} = 29.6875\text{ J} \approx 29.7\text{ J}

Final answer

∣ΔK∣=29.7 J|\Delta K| = 29.7\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the dimensional units of momentum (p=mvp = mv, in kg⋅m/s\text{kg}\cdot\text{m/s}) versus kinetic energy (K=12mv2K = \frac{1}{2}mv^2, in J\text{J}).

  • Practice calculating kinetic energy changes in perfectly inelastic collisions to build the habit of squaring velocity.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies by 3.6 instead of dividing by 3.6 when converting km/h to m/s, yielding an erroneously large initial speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m1=0.0250 kg  ⟹  m2=0.475 kg  ⟹  v1i=180×3.6=648 m/sm_1 = 0.0250\text{ kg} \implies m_2 = 0.475\text{ kg} \implies v_{1i} = 180 \times 3.6 = 648\text{ m/s}

    Correct

    m1=0.0250 kgm_1 = 0.0250\text{ kg}, m2=0.475 kgm_2 = 0.475\text{ kg}, and v1i=1803.6=50.0 m/sv_{1i} = \frac{180}{3.6} = 50.0\text{ m/s}

    You converted the masses to kilograms correctly, but when converting velocity from km/h\text{km/h} to m/s\text{m/s}, you should divide by 3.63.6 because 1 km/h=1000 m3600 s=13.6 m/s1\text{ km/h} = \frac{1000\text{ m}}{3600\text{ s}} = \frac{1}{3.6}\text{ m/s}.

  2. Step 2

    m1v1i=(m1+m2)vf  ⟹  vf=0.0250×6480.500=16.20.500=32.4 m/sm_1 v_{1i} = (m_1 + m_2) v_f \implies v_f = \frac{0.0250 \times 648}{0.500} = \frac{16.2}{0.500} = 32.4\text{ m/s}

    Correct

    vf=m1v1im1+m2=0.0250×50.00.500=2.50 m/sv_f = \frac{m_1 v_{1i}}{m_1 + m_2} = \frac{0.0250 \times 50.0}{0.500} = 2.50\text{ m/s}

    Your formula and substitution for conservation of momentum in a perfectly inelastic collision are correct, but the calculated result is affected by the incorrect value of v1iv_{1i}.

  3. Step 3

    Ki=0.5×0.0250×6482=5248.8 J  ⟹  Kf=0.5×0.500×32.42=262.44 J  ⟹  ∣ΔK∣=5248.8−262.44=4986.36 JK_i = 0.5 \times 0.0250 \times 648^2 = 5248.8\text{ J} \implies K_f = 0.5 \times 0.500 \times 32.4^2 = 262.44\text{ J} \implies |\Delta K| = 5248.8 - 262.44 = 4986.36\text{ J}

    Correct

    Ki=12(0.0250)(50.0)2=31.25 J  ⟹  Kf=12(0.500)(2.50)2=1.5625 J  ⟹  ∣ΔK∣=31.25−1.5625≈29.7 JK_i = \frac{1}{2}(0.0250)(50.0)^2 = 31.25\text{ J} \implies K_f = \frac{1}{2}(0.500)(2.50)^2 = 1.5625\text{ J} \implies |\Delta K| = 31.25 - 1.5625 \approx 29.7\text{ J}

    Your kinetic energy equations and subtraction are executed accurately, but the resulting values reflect the initial velocity error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted both masses from grams to kilograms.

You correctly identified that the collision is completely inelastic and applied linear momentum conservation m1v1i=(m1+m2)vfm_1 v_{1i} = (m_1 + m_2)v_f.

You applied the correct kinetic energy formula and subtracted final from initial to find ∣ΔK∣|\Delta K|.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Slip

You multiplied by 3.63.6 instead of dividing by 3.63.6 when converting km/h\text{km/h} to m/s\text{m/s}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of conversion between km/h\text{km/h} and m/s\text{m/s}. Since 1 m/s=3.6 km/h1\text{ m/s} = 3.6\text{ km/h}, a speed in m/s\text{m/s} must always have a smaller numerical value than the same speed in km/h\text{km/h}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Speed Unit Conversion Rule
  • To convert km/h\text{km/h} to m/s\text{m/s}, divide by 3.63.6 (or multiply by 10003600\frac{1000}{3600}). To convert m/s\text{m/s} to km/h\text{km/h}, multiply by 3.63.6.

  • Always perform a sanity check: traveling for one second covers far fewer meters than traveling for one whole hour covers kilometers, so the number in m/s\text{m/s} must be smaller.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert initial velocity using division: v1i=1.80×102 km/h3.6=50.0 m/sv_{1i} = \frac{1.80 \times 10^2\text{ km/h}}{3.6} = 50.0\text{ m/s}.

  2. Apply conservation of momentum: vf=m1v1im1+m2=0.0250 kg×50.0 m/s0.500 kg=2.50 m/sv_f = \frac{m_1 v_{1i}}{m_1 + m_2} = \frac{0.0250\text{ kg} \times 50.0\text{ m/s}}{0.500\text{ kg}} = 2.50\text{ m/s}.

  3. Compute kinetic energies: Ki=12(0.0250)(50.0)2=31.25 JK_i = \frac{1}{2}(0.0250)(50.0)^2 = 31.25\text{ J} and Kf=12(0.500)(2.50)2=1.5625 JK_f = \frac{1}{2}(0.500)(2.50)^2 = 1.5625\text{ J}.

  4. Find the absolute loss: ∣ΔK∣=31.25 J−1.5625 J=29.6875 J≈29.7 J|\Delta K| = 31.25\text{ J} - 1.5625\text{ J} = 29.6875\text{ J} \approx 29.7\text{ J}.

Final answer

v1i=50.0 m/sv_{1i} = 50.0\text{ m/s}, vf=2.50 m/sv_f = 2.50\text{ m/s}, ∣ΔK∣=29.7 J|\Delta K| = 29.7\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional fractions explicitly, such as 180 km1 h×1000 m1 km×1 h3600 s\frac{180\text{ km}}{1\text{ h}} \times \frac{1000\text{ m}}{1\text{ km}} \times \frac{1\text{ h}}{3600\text{ s}}, whenever you are unsure about whether to multiply or divide.

  • Practice quick unit conversions between km/h\text{km/h} and m/s\text{m/s} using benchmark values like 36 km/h=10 m/s36\text{ km/h} = 10\text{ m/s} and 72 km/h=20 m/s72\text{ km/h} = 20\text{ m/s}.

Lock it in

Similar question

01

A dart of mass 0.050 kg0.050\text{ kg} travels horizontally at 30.0 m/s30.0\text{ m/s} and strikes a stationary wooden sphere of mass 0.450 kg0.450\text{ kg} on a frictionless table, embedding itself inside. Find the common final speed vfv_f of the dart-sphere system.

Answer

vf=3.00 m/sv_f = 3.00\text{ m/s}. By conservation of momentum: mdartvi=(mdart+msphere)vf  ⟹  (0.050)(30.0)=(0.050+0.450)vf  ⟹  1.50=0.500vf  ⟹  vf=3.00 m/sm_{\text{dart}}v_i = (m_{\text{dart}} + m_{\text{sphere}})v_f \implies (0.050)(30.0) = (0.050 + 0.450)v_f \implies 1.50 = 0.500 v_f \implies v_f = 3.00\text{ m/s}.

02

A 0.020 kg0.020\text{ kg} bullet traveling horizontally at 400 m/s400\text{ m/s} strikes and embeds into a stationary ballistic block of mass 1.98 kg1.98\text{ kg}. Calculate the absolute mechanical energy converted into internal thermal/deformation energy during the collision.

Answer

∣ΔK∣=1584 J≈1.58×103 J|\Delta K| = 1584\text{ J} \approx 1.58\times 10^3\text{ J}. Combined mass M=0.020+1.98=2.00 kgM = 0.020 + 1.98 = 2.00\text{ kg}. Final speed vf=(0.020)(400)2.00=4.0 m/sv_f = \frac{(0.020)(400)}{2.00} = 4.0\text{ m/s}. Initial kinetic energy Ki=12(0.020)(400)2=1600 JK_i = \frac{1}{2}(0.020)(400)^2 = 1600\text{ J}. Final kinetic energy Kf=12(2.00)(4.0)2=16 JK_f = \frac{1}{2}(2.00)(4.0)^2 = 16\text{ J}. Energy loss ∣ΔK∣=1600−16=1584 J|\Delta K| = 1600 - 16 = 1584\text{ J}.

03

Glider A (mA=0.200 kgm_A = 0.200\text{ kg}) moves along an air track at +1.50 m/s+1.50\text{ m/s} toward Glider B (mB=0.300 kgm_B = 0.300\text{ kg}) moving in the opposite direction at −0.50 m/s-0.50\text{ m/s}. They collide and lock together via Velcro. Determine the final velocity vfv_f and the fraction of the initial kinetic energy lost.

Answer

vf=+0.30 m/sv_f = +0.30\text{ m/s}; fraction lost is 83%83\%. Total initial momentum pi=(0.200)(1.50)+(0.300)(−0.50)=0.300−0.150=0.150 kg⋅m/sp_i = (0.200)(1.50) + (0.300)(-0.50) = 0.300 - 0.150 = 0.150\text{ kg}\cdot\text{m/s}. Total mass M=0.200+0.300=0.500 kgM = 0.200 + 0.300 = 0.500\text{ kg}, so vf=0.1500.500=+0.30 m/sv_f = \frac{0.150}{0.500} = +0.30\text{ m/s}. Initial kinetic energy Ki=12(0.200)(1.50)2+12(0.300)(−0.50)2=0.225+0.0375=0.2625 JK_i = \frac{1}{2}(0.200)(1.50)^2 + \frac{1}{2}(0.300)(-0.50)^2 = 0.225 + 0.0375 = 0.2625\text{ J}. Final kinetic energy Kf=12(0.500)(0.30)2=0.0225 JK_f = \frac{1}{2}(0.500)(0.30)^2 = 0.0225\text{ J}. Fraction lost =0.2625−0.02250.2625=0.2400.2625≈0.914= \frac{0.2625 - 0.0225}{0.2625} = \frac{0.240}{0.2625} \approx 0.914 (or 91.4%91.4\%).

Loading workspace…