Resources

A heat engine absorbs 2500 J2500\text{ J} of heat from a high-temperature reservoir during each cycle and exhausts 1600 J1600\text{ J} of heat to a low-temperature reservoir. Calculate the thermal efficiency η\eta of this engine as a percentage.

Answer and steps

Final answer

η=36.0%\eta = 36.0\%

Steps

01

Identify the Given Values

From the problem statement, we have:

  • Heat absorbed from the high-temperature reservoir: QH=2500 JQ_H = 2500\text{ J}
  • Heat expelled to the low-temperature reservoir: QC=1600 JQ_C = 1600\text{ J}

02

Determine the Net Work Done

According to the First Law of Thermodynamics for a cyclical process, the net useful mechanical work WW performed by the heat engine in one complete cycle is the difference between the heat absorbed and the heat released:

W=QH−QCW = Q_H - Q_C

Substitute the given values:

W=2500 J−1600 J=900 JW = 2500\text{ J} - 1600\text{ J} = 900\text{ J}


03

Calculate the Thermal Efficiency

The thermal efficiency η\eta of a heat engine is defined as the ratio of the net work output to the total heat input from the hot reservoir:

η=WQH=1−QCQH\eta = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H}

Substitute W=900 JW = 900\text{ J} and QH=2500 JQ_H = 2500\text{ J}:

η=900 J2500 J=0.36\eta = \frac{900\text{ J}}{2500\text{ J}} = 0.36

Convert the decimal to a percentage:

η=0.36×100%=36.0%\eta = 0.36 \times 100\% = 36.0\%

Common Pitfall: Always divide the useful work by the total input heat QHQ_H, not by the exhausted heat QCQ_C. Efficiency measures what you get out relative to what you put in.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses thermal efficiency with the ratio of heat exhausted to heat absorbed, calculating Q_C / Q_H instead of net work divided by heat absorbed, resulting in 64%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    QH=2500 J,QC=1600 JQ_H = 2500\text{ J},\quad Q_C = 1600\text{ J}

  2. Step 2

    η=QCQH  ⟹  η=16002500=0.64\eta = \frac{Q_C}{Q_H} \implies \eta = \frac{1600}{2500} = 0.64

    Correct

    η=1−QCQH=1−1600 J2500 J=0.36\eta = 1 - \frac{Q_C}{Q_H} = 1 - \frac{1600\text{ J}}{2500\text{ J}} = 0.36

    You defined efficiency using QCQH\frac{Q_C}{Q_H}, which represents the fraction of heat wasted rather than the fraction converted into work. The net work is W=QH−QCW = Q_H - Q_C, so the efficiency is η=WQH=1−QCQH\eta = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H}.

  3. Step 3

    η=64%\eta = 64\%

    Correct

    η=36.0%\eta = 36.0\%

    You converted your decimal to a percentage correctly, but the numerical value was affected by using the incorrect efficiency formula in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified both the absorbed heat QHQ_H and exhausted heat QCQ_C from the problem statement.

You accurately computed the decimal quotient and converted it to a percentage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused thermal efficiency (the fraction of input heat converted into net work) with the fraction of input heat discarded as exhaust (QC/QHQ_C / Q_H).

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Efficiency
  • Thermal efficiency is η=WnetQH=QH−QCQH=1−QCQH\eta = \frac{W_{\text{net}}}{Q_H} = \frac{Q_H - Q_C}{Q_H} = 1 - \frac{Q_C}{Q_H}.

  • Always define efficiency as what you gain (net work WW) divided by what you pay (QHQ_H).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the net work output using the first law: W=QH−QC=2500 J−1600 J=900 JW = Q_H - Q_C = 2500\text{ J} - 1600\text{ J} = 900\text{ J}.

  2. Divide net work by the heat absorbed: η=WQH=900 J2500 J=0.36\eta = \frac{W}{Q_H} = \frac{900\text{ J}}{2500\text{ J}} = 0.36.

  3. Convert the decimal efficiency into a percentage: η=0.36×100%=36.0%\eta = 0.36 \times 100\% = 36.0\%.

Final answer

η=36.0%\eta = 36.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy flow diagram of a heat engine to visualize how input heat splits into useful work and exhaust heat.

  • Practice calculating thermal efficiency directly using η=1−QCQH\eta = 1 - \frac{Q_C}{Q_H}.

OverviewACEpath Teacher's Diagnosis

02 The student erroneously divides the work output by the heat exhausted to the cold reservoir rather than the heat absorbed from the hot reservoir, obtaining an efficiency of 56.25%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=2500 J−1600 J=900 JW = 2500\text{ J} - 1600\text{ J} = 900\text{ J}

  2. Step 2

    η=WQC  ⟹  η=9001600=0.5625\eta = \frac{W}{Q_C} \implies \eta = \frac{900}{1600} = 0.5625

    Correct

    η=WQH=900 J2500 J=0.36\eta = \frac{W}{Q_H} = \frac{900\text{ J}}{2500\text{ J}} = 0.36

    You placed the exhausted heat QCQ_C in the denominator. Thermal efficiency is defined as the useful work output divided by the heat absorbed from the hot reservoir, QHQ_H.

  3. Step 3

    η=56.25%\eta = 56.25\%

    Correct

    η=36.0%\eta = 36.0\%

    You converted your decimal to a percentage correctly, but the numerical value was affected by the incorrect denominator in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the two heat values and found the net work output WW by subtracting the exhausted heat from the absorbed heat.

You accurately converted your calculated decimal value into a percentage.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Heat engine efficiency denominator confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the exhausted heat QCQ_C as the basis for efficiency instead of the total heat absorbed QHQ_H, confusing the heat discarded with the total heat input required to operate the engine.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Efficiency as Output over Input
  • Thermal efficiency always compares what you gain to what you pay: η=Net Work OutHeat In=WQH\eta = \frac{\text{Net Work Out}}{\text{Heat In}} = \frac{W}{Q_H}.

  • Always verify that the denominator is the total heat entering the engine from the high-temperature reservoir (QHQ_H).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the thermal efficiency definition using the heat absorbed: η=WQH\eta = \frac{W}{Q_H}.

  2. Substitute W=900 JW = 900\text{ J} and QH=2500 JQ_H = 2500\text{ J}: η=900 J2500 J=0.36\eta = \frac{900\text{ J}}{2500\text{ J}} = 0.36.

  3. Convert 0.360.36 into a percentage: 0.36×100%=36.0%0.36 \times 100\% = 36.0\%.

Final answer

η=36.0%\eta = 36.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy-flow diagram for a heat engine to keep straight which heat transfer represents input energy (QHQ_H) and which represents waste energy (QCQ_C).

  • Practice rewriting η=WQH\eta = \frac{W}{Q_H} as 1−QCQH1 - \frac{Q_C}{Q_H} to reinforce that efficiency is always bounded below 1 by the heat exhausted to the cold reservoir.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly adds the exhausted heat to the absorbed heat to find the total work instead of subtracting it, leading to a calculated efficiency of 164%.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=QH+QC=2500 J+1600 J=4100 JW = Q_H + Q_C = 2500\text{ J} + 1600\text{ J} = 4100\text{ J}

    Correct

    W=QH−QC=2500 J−1600 J=900 JW = Q_H - Q_C = 2500\text{ J} - 1600\text{ J} = 900\text{ J}

    By energy conservation over a complete cycle, the net work done is the heat absorbed minus the heat expelled (W=QH−QCW = Q_H - Q_C), not their sum.

  2. Step 2

    η=WQH=41002500\eta = \frac{W}{Q_H} = \frac{4100}{2500}

    Correct

    η=WQH=900 J2500 J=0.36\eta = \frac{W}{Q_H} = \frac{900\text{ J}}{2500\text{ J}} = 0.36

    You applied the correct definition for thermal efficiency, but this step inherited the incorrect value of WW from Step 1.

  3. Step 3

    η=1.64=164%\eta = 1.64 = 164\%

    Correct

    η=36.0%\eta = 36.0\%

    Carrying the erroneous work forward produced an efficiency of 164%164\%, whereas the correct efficiency is 36.0%36.0\%.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given values for heat input and heat exhausted.

You used the correct definition formula for thermal efficiency, η=WQH\eta = \frac{W}{Q_H}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in First Law energy balance

You wrote W=QH+QCW = Q_H + Q_C instead of W=QH−QCW = Q_H - Q_C when calculating net work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing heat entering the engine (QHQ_H) and heat leaving the engine (QCQ_C) as parallel energy inputs rather than viewing QCQ_C as discarded energy that reduces net useful work output.

REASONING PATH
Your ACEpath teacher’s suggested approach
Energy Balance in a Cycle
  • For any heat engine in a closed cycle, energy input equals total energy output: QH=W+QCQ_H = W + Q_C, which rearranges to W=QH−QCW = Q_H - Q_C.

  • Always subtract the exhausted heat from the absorbed heat to find the net mechanical work done.

Sanity Check for Efficiency
  • Thermal efficiency η=WQH\eta = \frac{W}{Q_H} must always satisfy 0<η<10 < \eta < 1 (or 0%<η<100%0\% < \eta < 100\%) by the First and Second Laws of Thermodynamics.

  • If your calculated efficiency exceeds 100%100\%, pause immediately and check whether you added heat terms instead of subtracting them.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply energy conservation for a complete cycle: W=QH−QC=2500 J−1600 J=900 JW = Q_H - Q_C = 2500\text{ J} - 1600\text{ J} = 900\text{ J}.

  2. Substitute W=900 JW = 900\text{ J} and QH=2500 JQ_H = 2500\text{ J} into the efficiency formula: η=900 J2500 J=0.36\eta = \frac{900\text{ J}}{2500\text{ J}} = 0.36.

  3. Convert to a percentage: η=0.36×100%=36.0%\eta = 0.36 \times 100\% = 36.0\%.

Final answer

η=36.0%\eta = 36.0\%

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy flow diagram for a heat engine where QHQ_H splits into useful work WW and waste heat QCQ_C.

  • Practice using the alternate direct formula η=1−QCQH\eta = 1 - \frac{Q_C}{Q_H} to avoid needing a separate step for work.

Lock it in

Similar question

01

A heat engine absorbs 4000 J4000\text{ J} of thermal energy from a high-temperature source and releases 2600 J2600\text{ J} to a low-temperature sink. Calculate the thermal efficiency η\eta of the engine as a percentage.

Answer

W=QH−QC=4000 J−2600 J=1400 JW = Q_H - Q_C = 4000\text{ J} - 2600\text{ J} = 1400\text{ J}. Thermal efficiency η=WQH=1400 J4000 J=0.35=35.0%\eta = \frac{W}{Q_H} = \frac{1400\text{ J}}{4000\text{ J}} = 0.35 = 35.0\%.

02

An engine operates with a thermal efficiency of 28%28\%. If it absorbs 5000 J5000\text{ J} of heat from the hot reservoir each cycle, how much heat QCQ_C does it exhaust to the cold reservoir?

Answer

Net work done is W=η⋅QH=0.28×5000 J=1400 JW = \eta \cdot Q_H = 0.28 \times 5000\text{ J} = 1400\text{ J}. Exhaust heat is QC=QH−W=5000 J−1400 J=3600 JQ_C = Q_H - W = 5000\text{ J} - 1400\text{ J} = 3600\text{ J}.

03

A geothermal heat engine delivers 450 kJ450\text{ kJ} of mechanical work per cycle while rejecting 1050 kJ1050\text{ kJ} of waste heat into cooling towers. Determine the total heat absorbed from the geothermal source QHQ_H and the engine's thermal efficiency η\eta.

Answer

Total heat input is QH=W+QC=450 kJ+1050 kJ=1500 kJQ_H = W + Q_C = 450\text{ kJ} + 1050\text{ kJ} = 1500\text{ kJ}. Thermal efficiency is η=WQH=450 kJ1500 kJ=0.30=30.0%\eta = \frac{W}{Q_H} = \frac{450\text{ kJ}}{1500\text{ kJ}} = 0.30 = 30.0\%.

Loading workspace…