Resources
In an undergraduate mechanics and fluids laboratory experiment, students determine the local density of an unknown motor oil via a double-weight titration-style submersion setup. A precision electronic balance supports a graduated cylinder filled with the oil. A solid stainless-steel cylinder of diameter and height is suspended from a vernier height gauge above the cylinder. When the steel cylinder is lowered into the oil from depth to depth , the apparent balance reading increases by due to the reaction force of buoyancy. Taking , (a) calculate the incremental submerged volume of the cylinder and (b) determine the mass density of the oil in .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Calculating the Incremental Submerged Volume
The cylinder has a uniform circular cross-section. When it is lowered from depth to depth , the incremental depth submerged into the oil is:
The cross-sectional area of the cylinder with diameter (radius ) is:
The additional volume of cylinder submerged, which equals the volume of oil newly displaced, is:
Part (b): Determining the Density of the Motor Oil
-
Physical Principle: According to Archimedes' principle, the oil exerts an upward buoyant force on the newly submerged portion of the cylinder:
By Newton's third law (action-reaction), the cylinder exerts an equal and opposite downward force of magnitude on the fluid.
-
Balance Reading: The electronic balance measures the normal force supporting the container of oil. The additional downward force exerted on the oil increases the balance reading by:
Equating the two expressions for the force increment:
Canceling shows that the increase in mass indicated by the balance simply equals the mass of the newly displaced fluid:
-
Numerical Evaluation: Convert the mass increase to kilograms:
Substitute the values into the density equation:
Common Pitfall: A frequent mistake is using the full height of the cylinder () rather than the change in submerged depth (). Because the balance reading records only the difference between the two states, only the incremental submerged volume is responsible for .
Typical errors
01 The student uses the diameter instead of the radius in the cross-sectional area formula for the cylinder, overestimating the submerged volume by a factor of four.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted the diameter directly into the area formula instead of using the radius (or ). This made the calculated volume 4 times too large.
- Step 3Correct
Your physical reasoning using Archimedes' principle and Newton's third law was completely correct, as was your unit conversion. The numerical error here was purely propagated from the incorrect volume in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly found the incremental depth .
You correctly applied Archimedes' principle and Newton's third law to relate the balance reading increase to the displaced fluid mass: .
You correctly converted units between and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou substituted the diameter directly into the formula for circular area instead of halving the diameter to find the radius , causing the cross-sectional area and volume to be overestimated by a factor of .
REASONING PATH
Your ACEpath teacher’s suggested approach- Radius vs. Diameter in Area Formulas
A circular cross-section has area , where .
Whenever a problem gives diameter , immediately write down before substituting into geometric formulas.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the radius from the diameter: .
Compute the incremental submerged volume: .
Solve for the oil density: .
(a) ; (b)
02 The student uses the total height of the cylinder instead of the incremental submerged depth to compute the volume change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted the cylinder's total height () instead of the change in submerged depth (). Because the cylinder was already submerged to , only the additional contributed to the change in displaced volume.
- Step 3Correct
Your physical relationship and unit conversion are completely correct, but the numerical answer inherits the doubled volume from the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the radius from the cylinder diameter.
You correctly recognized that the apparent mass change on the balance equals the mass of the newly displaced fluid.
You converted units accurately between and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou plugged the total height of the object into a formula measuring a differential change.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing an object's overall dimension with the differential displacement () when computing an incremental change in submerged volume.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the delta parameter
Whenever an equation asks for a change in volume , use the change in depth , not total object length .
Verify whether the question describes an incremental motion between two partially submerged states or a full immersion from dry air.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b)
03 The student forgets to convert the final calculated density from g/cm³ to kg/m³, failing to satisfy the required SI units.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Dividing by yields . Because , you must multiply by to convert to the requested SI unit of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the change in depth rather than the total height of the cylinder.
You accurately computed the incremental volume .
You correctly connected the balance reading change to the buoyant reaction force and displaced fluid mass.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou computed the numerical quotient in CGS units () and directly wrote the SI unit symbol () without converting.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisTreating unit labels as interchangeable tags rather than converting values quantitatively using (or converting input values to kilograms and cubic meters before dividing).
REASONING PATH
Your ACEpath teacher’s suggested approach- Consistent Base Units
Always convert all quantities to standard SI units before dividing, or explicitly multiply by conversion factors at the end.
Express mass in kilograms () and volume in cubic meters () before calculating density.
- Density Order-of-Magnitude Sanity Check
Liquid water has a density of , and most common oils have densities between and .
A liquid density of is comparable to air (), which immediately signals a missing factor of .
CORRECTED PATH
ACEpath Teacher's Demonstration(a) (); (b)
Lock it in
How are the cross-sectional area formulas expressed in terms of radius versus diameter ?
and . If you substitute directly into , the area is multiplied by 4.
Similar question
A solid rod of diameter is lowered by an incremental depth of into an unknown liquid. Find the incremental submerged volume in and in .
Answer
. .
In the same experiment, lowering the rod by causes the reading on the electronic balance supporting the liquid beaker to increase by . Determine the liquid's density in .
Answer
Using , .
A student uses a cylindrical probe with diameter to measure the density of glycerin (). If the electronic balance under the glycerin container detects an increase of , by how many centimeters was the probe lowered into the liquid?
Answer
Displaced volume is . Radius is , so area . Depth change is .