Resources
A medical hydrometer with a calibrated cylindrical stem of cross-sectional area and total mass is floated in a biological fluid sample. The fluid density is specified as . Convert all given parameters to standard SI base units (, , and ), determine the total displaced fluid volume in and , and calculate the stem height difference in millimeters between floating in this biological fluid versus floating in pure distilled water (density ). Take .
Answer and steps
Final answer
;
Steps
Convert Given Quantities to SI Base Units
Use the standard unit conversion factors:
- Area:
- Mass:
- Density of biological fluid:
- Density of pure water:
Determine Displaced Fluid Volume in the Biological Sample
According to Archimedes' principle, a floating object displaces a weight of fluid equal to its own weight:
Canceling on both sides gives:
Using values in and :
Converting to cubic meters ():
(Alternatively, dividing directly in SI base units: .)
Calculate the Stem Height Difference ()
In pure distilled water (), the submerged volume is:
Because water is less dense than the biological fluid, the hydrometer sinks deeper in water. The change in submerged volume is solely due to the cylindrical stem moving into or out of the liquid:
Since the stem is a uniform cylinder of cross-sectional area :
Substitute the values:
Pitfall to avoid: Ensure the stem area is converted correctly from to using , not , before computing .
Typical errors
01 The student forgets to square the conversion factor when converting square millimeters to square meters, leading to an incorrect cross-sectional area and height difference.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
, ,
Correct, ,
You converted mass and density correctly, but you forgot to square the unit prefix factor for area: .
- Step 2
- Step 3
- Step 4Correct
Your formula is completely correct, but substituting your erroneous value of caused the height difference to be off by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly stated and applied Archimedes' principle for floating equilibrium.
You accurately converted grams to kilograms and fluid density from to .
You correctly recognized that the difference in submerged volume corresponds to the stem height shift via .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the conversion factor between millimeters and meters as without squaring it for square millimeters.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisForgetting that dimensional scaling applies to unit prefixes: when converting units of area (), the prefix multiplier must also be raised to the second power.
REASONING PATH
Your ACEpath teacher’s suggested approach- Area Conversion Rule
Always write the parenthesized linear conversion first and square both the number and unit: .
CORRECTED PATH
ACEpath Teacher's DemonstrationUse the corrected cross-sectional area: .
Recalculate the stem displacement: .
Convert meters to millimeters: .
02 The student misinterprets the fluid density conversion by dividing by 1000 instead of multiplying, resulting in an erroneous displaced volume in SI units.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
, ,
You converted and correctly, but . Multiplying by rather than makes the fluid density a million times too small.
- Step 2Correct
Your formula is algebraically correct, but because of the erroneous density value, your result is instead of ().
- Step 3Correct
You applied the correct strategy to find the displaced volume difference, but the values are magnified by a factor of due to the earlier density conversion error.
- Step 4Correct
Your relationship is completely correct, but the propagated volume error yielded an unrealistically large stem height of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the cross-sectional area and mass into SI base units.
You applied Archimedes' principle accurately by stating for a floating body.
You correctly related the difference in submerged volumes to the stem height change via .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou converted to by only accounting for grams to kilograms () while forgetting to invert the denominator conversion .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisIncomplete compound unit conversion: converting a compound unit with a denominator prefix requires accounting for the power in the denominator ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Compound Density Conversion
. A cubic meter is much larger than a cubic centimeter, so density in must have a larger numerical value.
Always multiply by when converting density from to .
- Physical Reality Sanity Check
A small hydrometer of mass cannot displace of fluid or exhibit a stem height shift of millions of millimeters.
Check the order of magnitude of intermediate volume and length results against physical intuition before finalizing the answer.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert density properly to SI units: , and .
Recalculate submerged volume: .
Compute submerged volume in water: .
Determine volume difference: .
Solve for the stem height change: .
;
03 The student mistakenly multiplies the stem area by the volume difference instead of dividing, arriving at an incorrect physical dimension for the stem height difference.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
- Step 4Correct
You multiplied the volume difference by the cross-sectional area instead of dividing by it. For a cylinder of cross-sectional area , the volume is , which means the height change is .
WHAT YOU DID WELL
Compliments from Your TeacherYou converted all given values to SI units with correct powers of ten.
You used Archimedes' principle correctly to relate floating weight to buoyant force.
You determined the displaced fluid volume in both fluids and computed their difference accurately.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou set instead of .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou inverted the geometric relationship between volume, cross-sectional area, and height, which also violates dimensional consistency by yielding instead of length in meters.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Dimensional Consistency
Volume divided by area yields length: , whereas .
Before calculating, verify that your algebraic expression produces meters () rather than .
- Rearrange Uniform Cylinder Volume
For any uniform prism or cylinder, .
Isolate the unknown height by dividing both sides by the cross-sectional area: .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the geometric formula relating cylinder volume to stem height: .
Isolate the stem height difference: .
Substitute the volume difference and area: .
Convert meters to millimeters: .
;
Lock it in
How do you correctly convert an area given in square millimeters () to square meters ()?
Multiply by (or squared), because .
Similar question
A hydrometer with a cylindrical stem of cross-sectional area floats in liquid A, displacing , and in liquid B, displacing . Find the difference in stem height in millimeters between the two liquids.
Answer
. Key steps: . Stem area . Thus, .
A hydrometer floats in an oil of density and in saltwater of density . If the stem submerged height changes by between the two liquids, calculate the stem's cross-sectional area in .
Answer
. Key steps: Displaced volumes are and . Volume difference . Area (or ).
A cylindrical float with uniform total cross-sectional area and mass floats vertically. It is moved from freshwater () to a concentrated brine solution (). Determine the change in the float's submerged depth in centimeters, ensuring all intermediate areas and volumes are properly converted to SI units.
Answer
. Key steps: ; . In freshwater, ; in brine, . . .