Resources

A cylindrical laboratory sample core has a cross-sectional area of A=12.5 cm2A = 12.5\text{ cm}^2 and a uniform density of ρ=2.70 g/cm3\rho = 2.70\text{ g/cm}^3. The sample's total mass was measured on an analytical balance and recorded as m=0.540 kgm = 0.540\text{ kg}. Determine the original length LL of the cylinder in millimeters (mm\text{mm}). Express your answer to three significant figures.

Answer and steps

Final answer

160 mm160\text{ mm}

Steps

01

Align the units of mass

To find the length LL of the cylinder, we relate its mass, density, and geometric dimensions step by step.

The density is given in grams per cubic centimeter (g/cm3\text{g/cm}^3), while the mass is given in kilograms (kg\text{kg}). Convert the mass to grams so that the units are consistent: m=0.540 kg×1000 g/kg=540 gm = 0.540\text{ kg} \times 1000\text{ g/kg} = 540\text{ g}

Common Pitfall: Directly dividing m=0.540 kgm = 0.540\text{ kg} by ρ=2.70 g/cm3\rho = 2.70\text{ g/cm}^3 without converting kilograms to grams will result in an answer that is off by a factor of 10001000.


02

Calculate the volume of the cylinder

The relationship between mass mm, volume VV, and density ρ\rho is: ρ=mV  ⟹  V=mρ\rho = \frac{m}{V} \implies V = \frac{m}{\rho}

Substitute the values: V=540 g2.70 g/cm3=200 cm3V = \frac{540\text{ g}}{2.70\text{ g/cm}^3} = 200\text{ cm}^3


03

Calculate the length in centimeters

For a uniform cylinder, volume is the product of the cross-sectional area AA and the length LL: V=A⋅L  ⟹  L=VAV = A \cdot L \implies L = \frac{V}{A}

Substitute V=200 cm3V = 200\text{ cm}^3 and A=12.5 cm2A = 12.5\text{ cm}^2: L=200 cm312.5 cm2=16.0 cmL = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}


04

Convert the length to millimeters

The question asks for the length in millimeters (mm\text{mm}): L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}

Expressed to three significant figures, the length of the cylinder is 160 mm160\text{ mm}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student substitutes the mass directly in kilograms without converting to grams, leading to an incorrect length that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=mρ  ⟹  V=0.5402.7=0.200 cm3V = \frac{m}{\rho} \implies V = \frac{0.540}{2.7} = 0.200\text{ cm}^3

    Correct

    m=0.540 kg=540 g  ⟹  V=540 g2.70 g/cm3=200 cm3m = 0.540\text{ kg} = 540\text{ g} \implies V = \frac{540\text{ g}}{2.70\text{ g/cm}^3} = 200\text{ cm}^3

    You substituted the mass as 0.540 kg0.540\text{ kg} while the density was given in g/cm3\text{g/cm}^3. Because the mass units do not match, the mass must first be converted to grams (0.540 kg=540 g0.540\text{ kg} = 540\text{ g}), which yields a volume of 200 cm3200\text{ cm}^3 rather than 0.200 cm30.200\text{ cm}^3.

  2. Step 2

    L=VA=0.20012.5=0.0160 cmL = \frac{V}{A} = \frac{0.200}{12.5} = 0.0160\text{ cm}

    Correct

    L=VA=200 cm312.5 cm2=16.0 cmL = \frac{V}{A} = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}

    You correctly used the geometric relation L=VAL = \frac{V}{A}, but your calculated length was off by a factor of 10001000 due to the incorrect volume from Step 1.

  3. Step 3

    L=0.0160×10=0.160 mmL = 0.0160 \times 10 = 0.160\text{ mm}

    Correct

    L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}

    You applied the correct conversion factor between centimeters and millimeters (1 cm=10 mm1\text{ cm} = 10\text{ mm}), but the final numerical value inherits the factor-of-10001000 error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and rearranged the density formula to solve for volume as V=mρV = \frac{m}{\rho}.

You correctly used the cylinder volume formula V=A⋅LV = A \cdot L to solve for the length as L=VAL = \frac{V}{A}.

You correctly multiplied by 1010 to convert centimeters to millimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inconsistent Unit Substitution

You divided 0.540 kg0.540\text{ kg} by 2.70 g/cm32.70\text{ g/cm}^3 without converting kilograms to grams.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated numerical values as pure numbers without writing down or checking their units during substitution, missing the mismatch between kg\text{kg} in mass and g\text{g} in density.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Mass and Volume Units Before Calculating
  • Before evaluating a formula like ρ=mV\rho = \frac{m}{V}, all base units (such as g\text{g} vs. kg\text{kg} or cm\text{cm} vs. m\text{m}) must be identical in the numerator and denominator.

  • Always write the units alongside the numbers in your substitution line to ensure they cancel out properly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. m=0.540 kg×1000 g/kg=540 gm = 0.540\text{ kg} \times 1000\text{ g/kg} = 540\text{ g}

  2. V=mρ=540 g2.70 g/cm3=200 cm3V = \frac{m}{\rho} = \frac{540\text{ g}}{2.70\text{ g/cm}^3} = 200\text{ cm}^3

  3. L=VA=200 cm312.5 cm2=16.0 cmL = \frac{V}{A} = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}

  4. L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}

Final answer

160 mm160\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write units explicitly inside your calculation fractions to verify dimensional consistency.

  • Check whether your physical result makes sense: a solid metal core with mass over half a kilogram cannot be a fraction of a millimeter long.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the calculated length from centimeters to millimeters, leaving the final answer in centimeters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=0.540 kg=540 gm = 0.540\text{ kg} = 540\text{ g}

  2. Step 2

    V=mρ=5402.70=200 cm3V = \frac{m}{\rho} = \frac{540}{2.70} = 200\text{ cm}^3

  3. Step 3

    L=VA=20012.5=16.0L = \frac{V}{A} = \frac{200}{12.5} = 16.0

  4. Step 4

    L=16.0 mmL = 16.0\text{ mm}

    Correct

    L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}

    Dividing cm3\text{cm}^3 by cm2\text{cm}^2 yields centimeters, not millimeters. You attached the unit mm\text{mm} without converting from centimeters (1 cm=10 mm1\text{ cm} = 10\text{ mm}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted mass from kilograms to grams.

You used the relationship V=mρV = \frac{m}{\rho} accurately to find the volume.

You divided volume by cross-sectional area to find the length in centimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted unit conversion between metric prefixes

You noticed the target unit was millimeters and wrote 'mm', but you did not multiply the centimeter value by 1010.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Dropping intermediate unit labels during algebraic calculations causes calculated dimensions to be mistaken for the target unit.

REASONING PATH
Your ACEpath teacher’s suggested approach
Carry Units Through Every Line
  • cm3cm2=cm\frac{\text{cm}^3}{\text{cm}^2} = \text{cm}

  • Always write the derived unit alongside each intermediate numerical result before moving to the requested final unit.

Convert Centimeters to Millimeters
  • 1 cm=10 mm1\text{ cm} = 10\text{ mm}

  • Multiply the length in centimeters by 1010 to obtain the final measurement in millimeters.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the derived unit of length: L=200 cm312.5 cm2=16.0 cmL = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}.

  2. Apply the metric prefix conversion factor: 16.0 cm×10 mm1 cm=160 mm16.0\text{ cm} \times \frac{10\text{ mm}}{1\text{ cm}} = 160\text{ mm}.

Final answer

160 mm160\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include unit tags next to each intermediate calculation so derived units remain explicit.

  • Perform a separate conversion step whenever the requested unit differs from the system of units used during calculation.

OverviewACEpath Teacher's Diagnosis

03 The student multiplies density by cross-sectional area instead of dividing mass by density to find volume, misidentifying the relationship between mass, density, and volume as m = V / ρ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=540 gm = 540\text{ g}

  2. Step 2

    V=m×ρ=540×2.70=1458 cm3V = m \times \rho = 540 \times 2.70 = 1458\text{ cm}^3

    Correct

    V=mρ=540 g2.70 g/cm3=200 cm3V = \frac{m}{\rho} = \frac{540\text{ g}}{2.70\text{ g/cm}^3} = 200\text{ cm}^3

    From the definition of density, ρ=mV\rho = \frac{m}{V}, solving for volume gives V=mρV = \frac{m}{\rho}. Multiplying mass by density gives units of g2/cm3\text{g}^2/\text{cm}^3, which is not volume.

  3. Step 3

    L=VA=145812.5=116.64 cmL = \frac{V}{A} = \frac{1458}{12.5} = 116.64\text{ cm}

    Correct

    L=VA=200 cm312.5 cm2=16.0 cmL = \frac{V}{A} = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}

    Your geometric relationship L=VAL = \frac{V}{A} is correct, but your calculation carries forward the incorrect volume from Step 2.

  4. Step 4

    L=1170 mmL = 1170\text{ mm}

    Correct

    L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}

    Your conversion from centimeters to millimeters and rounding to three significant figures are mathematically consistent with your prior step, but the value is incorrect due to the earlier volume error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the mass from kilograms to grams to match the units of density.

You correctly used the geometric formula V=A⋅LV = A \cdot L rearranged as L=VAL = \frac{V}{A}.

You correctly multiplied by 1010 to convert centimeters to millimeters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion in density relationship

You wrote V=m×ρV = m \times \rho instead of dividing mass by density, V=mρV = \frac{m}{\rho}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You rearranged the definition ρ=mV\rho = \frac{m}{V} algebraically incorrectly or omitted dimensional analysis, which would have revealed that g×(g/cm3)=g2/cm3\text{g} \times (\text{g/cm}^3) = \text{g}^2/\text{cm}^3 rather than cm3\text{cm}^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Rearrange the Density Formula
  • Density is mass per unit volume: ρ=mV\rho = \frac{m}{V}. Multiplying both sides by VV yields m=ρVm = \rho V, and dividing both sides by ρ\rho yields V=mρV = \frac{m}{\rho}.

  • Whenever you need volume from mass and density, write down ρ=mV\rho = \frac{m}{V} and isolate VV explicitly as V=mρV = \frac{m}{\rho}.

Perform a Dimensional Check
  • Units on both sides of an equation must balance.

  • Track your units during substitution: gg/cm3=g⋅cm3g=cm3\frac{\text{g}}{\text{g/cm}^3} = \text{g} \cdot \frac{\text{cm}^3}{\text{g}} = \text{cm}^3, confirming that division is the correct operation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate volume: V=mρ=540 g2.70 g/cm3=200 cm3V = \frac{m}{\rho} = \frac{540\text{ g}}{2.70\text{ g/cm}^3} = 200\text{ cm}^3.

  2. Calculate length in centimeters: L=VA=200 cm312.5 cm2=16.0 cmL = \frac{V}{A} = \frac{200\text{ cm}^3}{12.5\text{ cm}^2} = 16.0\text{ cm}.

  3. Convert length to millimeters: L=16.0 cm×10 mm/cm=160 mmL = 16.0\text{ cm} \times 10\text{ mm/cm} = 160\text{ mm}.

Final answer

160 mm160\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the algebraic triangle or algebraic rearrangement for ρ=mV\rho = \frac{m}{V}.

  • Practice carrying physical units through every intermediate step to catch algebraic slips immediately.

Lock it in

Similar question

01

A cylindrical copper rod has a cross-sectional area of A=4.00 cm2A = 4.00\text{ cm}^2 and a density of ρ=8.96 g/cm3\rho = 8.96\text{ g/cm}^3. Its mass is recorded as m=0.896 kgm = 0.896\text{ kg}. Find its length in centimeters (extcm ext{cm}).

Answer

25.0 cm25.0\text{ cm}. Convert mass: m=0.896 kg=896 gm = 0.896\text{ kg} = 896\text{ g}. Compute volume: V=mρ=896 g8.96 g/cm3=100 cm3V = \frac{m}{\rho} = \frac{896\text{ g}}{8.96\text{ g/cm}^3} = 100\text{ cm}^3. Compute length: L=VA=100 cm34.00 cm2=25.0 cmL = \frac{V}{A} = \frac{100\text{ cm}^3}{4.00\text{ cm}^2} = 25.0\text{ cm}.

02

A hollow rectangular tube has an outer cross-sectional area of 15.0 cm215.0\text{ cm}^2 and an inner cavity area of 5.0 cm25.0\text{ cm}^2. The material density is 7.80 g/cm37.80\text{ g/cm}^3. If the total mass of the tube is 1.56 kg1.56\text{ kg}, calculate its length in millimeters (extmm ext{mm}).

Answer

200 mm200\text{ mm}. Net cross-sectional area: Anet=15.0−5.0=10.0 cm2A_{\text{net}} = 15.0 - 5.0 = 10.0\text{ cm}^2. Convert mass: m=1.56 kg=1560 gm = 1.56\text{ kg} = 1560\text{ g}. Volume of material: V=1560 g7.80 g/cm3=200 cm3V = \frac{1560\text{ g}}{7.80\text{ g/cm}^3} = 200\text{ cm}^3. Length in cm\text{cm}: L=200 cm310.0 cm2=20.0 cmL = \frac{200\text{ cm}^3}{10.0\text{ cm}^2} = 20.0\text{ cm}. Length in mm\text{mm}: L=20.0×10=200 mmL = 20.0 \times 10 = 200\text{ mm}.

03

A thin wire with a circular cross-section of radius r=0.500 mmr = 0.500\text{ mm} is made of gold (density ρ=19.3 g/cm3\rho = 19.3\text{ g/cm}^3). If the measured mass of the wire is m=0.152 kgm = 0.152\text{ kg}, find the total length of the wire in meters (extm ext{m}). Express your answer to three significant figures.

Answer

10.0 m10.0\text{ m}. Convert wire radius to cm\text{cm}: r=0.500 mm=0.0500 cmr = 0.500\text{ mm} = 0.0500\text{ cm}. Area: A=πr2=π(0.0500 cm)2≈7.854×10−3 cm2A = \pi r^2 = \pi (0.0500\text{ cm})^2 \approx 7.854 \times 10^{-3}\text{ cm}^2. Convert mass: m=0.152 kg=152 gm = 0.152\text{ kg} = 152\text{ g}. Volume: V=152 g19.3 g/cm3≈7.876 cm3V = \frac{152\text{ g}}{19.3\text{ g/cm}^3} \approx 7.876\text{ cm}^3. Length: L=VA≈7.876 cm37.854×10−3 cm2≈1003 cm≈10.0 mL = \frac{V}{A} \approx \frac{7.876\text{ cm}^3}{7.854 \times 10^{-3}\text{ cm}^2} \approx 1003\text{ cm} \approx 10.0\text{ m}.

Loading workspace…