Resources

In a precision physics laboratory, a student investigates the First Law of Thermodynamics using a rigid, sealed calorimeter of fixed internal volume containing 0.500 mol0.500\text{ mol} of argon gas (an ideal monatomic gas with CV=32RC_V = \frac{3}{2}R, where R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})). An internal immersion resistor with resistance Rres=10.0 ΩR_{\text{res}} = 10.0\ \Omega is connected to a DC power supply delivering a constant current of I=0.500 AI = 0.500\text{ A} for a duration of Δt=60.0 s\Delta t = 60.0\text{ s}. During this heating interval, a heat sensor records that 25.0 J25.0\text{ J} of thermal energy leaks through the calorimeter walls to the ambient environment. Calculate: (a) the electrical energy supplied to the gas EelecE_{\text{elec}}, (b) the net change in internal energy ΔU\Delta U of the gas, and (c) the resulting temperature change ΔT\Delta T recorded by the probe.

Answer and steps

Final answer

(a) Eelec=150 JE_{\text{elec}} = 150\text{ J}; (b) ΔU=125 J\Delta U = 125\text{ J}; (c) ΔT=20.0 K\Delta T = 20.0\text{ K}.

Steps

Part (a): Electrical Energy Supplied to the Gas

The immersion resistor converts electrical energy into thermal energy via Joule heating. The rate of electrical energy dissipation (power PP) is given by:

P=I2RresP = I^2 R_{\text{res}}

Over a time interval Δt\Delta t, the total electrical energy delivered to the gas inside the calorimeter is:

Eelec=PΔt=I2RresΔtE_{\text{elec}} = P \Delta t = I^2 R_{\text{res}} \Delta t

Substitute the given values:

Eelec=(0.500 A)2⋅10.0 Ω⋅60.0 s=0.250 A2⋅10.0 Ω⋅60.0 s=150 JE_{\text{elec}} = (0.500\text{ A})^2 \cdot 10.0\ \Omega \cdot 60.0\text{ s} = 0.250\text{ A}^2 \cdot 10.0\ \Omega \cdot 60.0\text{ s} = 150\text{ J}


Part (b): Net Change in Internal Energy (ΔU\Delta U)

According to the First Law of Thermodynamics:

ΔU=Qnet−W\Delta U = Q_{\text{net}} - W

  1. Work done (WW): Because the calorimeter is rigid and sealed, its volume remains strictly constant (ΔV=0\Delta V = 0). Consequently, the gas performs no boundary work: W=0W = 0
  2. Net heat transfer (QnetQ_{\text{net}}): The electrical resistor adds energy into the system, while thermal energy leaks out to the environment: Qnet=Eelec−QlossQ_{\text{net}} = E_{\text{elec}} - Q_{\text{loss}} Qnet=150 J−25.0 J=125 JQ_{\text{net}} = 150\text{ J} - 25.0\text{ J} = 125\text{ J}

Applying the First Law:

ΔU=125 J−0 J=125 J\Delta U = 125\text{ J} - 0\text{ J} = 125\text{ J}

Common Pitfall: Forgetting the heat loss or adding it instead of subtracting it leads to an incorrect value for net heat. Energy entering the system carries a positive sign, while energy leaving carries a negative sign.


Part (c): Temperature Change of the Gas (ΔT\Delta T)

The internal energy of a monatomic ideal gas is directly related to its temperature by:

ΔU=nCVΔT\Delta U = n C_V \Delta T

For a monatomic ideal gas, the molar heat capacity at constant volume is:

CV=32RC_V = \frac{3}{2}R

Substitute CVC_V into the internal energy equation and solve for ΔT\Delta T:

ΔT=ΔUnCV=ΔUn(32R)\Delta T = \frac{\Delta U}{n C_V} = \frac{\Delta U}{n \left(\frac{3}{2}R\right)}

Substitute the known values (n=0.500 moln = 0.500\text{ mol}, R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), and ΔU=125 J\Delta U = 125\text{ J}):

ΔT=125 J0.500 mol⋅(32⋅8.314 J/(mol⋅K))=125 J0.750 mol⋅8.314 J/(mol⋅K)=1256.2355 K≈20.0 K\Delta T = \frac{125\text{ J}}{0.500\text{ mol} \cdot \left(\frac{3}{2} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)} = \frac{125\text{ J}}{0.750\text{ mol} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})} = \frac{125}{6.2355}\text{ K} \approx 20.0\text{ K}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the current when calculating electrical energy using Joule heating, writing E_elec = I * R * Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Eelec=I⋅Rres⋅Δt  ⟹  Eelec=(0.500 A)⋅(10.0 Ω)⋅(60.0 s)=300 JE_{\text{elec}} = I \cdot R_{\text{res}} \cdot \Delta t \implies E_{\text{elec}} = (0.500\text{ A}) \cdot (10.0\ \Omega) \cdot (60.0\text{ s}) = 300\text{ J}

    Correct

    Eelec=I2RresΔt=(0.500 A)2⋅10.0 Ω⋅60.0 s=150 JE_{\text{elec}} = I^2 R_{\text{res}} \Delta t = (0.500\text{ A})^2 \cdot 10.0\ \Omega \cdot 60.0\text{ s} = 150\text{ J}

    You forgot to square the current II when applying Joule's law. Electrical power dissipated in a resistor is P=I2RP = I^2 R (or P=IVP = I V), not IRI R.

  2. Step 2

    W=0 J because the container is rigid  ⟹  ΔU=Eelec−Qloss=300 J−25.0 J=275 JW = 0\text{ J} \text{ because the container is rigid} \implies \Delta U = E_{\text{elec}} - Q_{\text{loss}} = 300\text{ J} - 25.0\text{ J} = 275\text{ J}

    Correct

    ΔU=Qnet−W=(150 J−25.0 J)−0 J=125 J\Delta U = Q_{\text{net}} - W = (150\text{ J} - 25.0\text{ J}) - 0\text{ J} = 125\text{ J}

    Your thermodynamic reasoning is completely sound: a rigid container means W=0W = 0, and heat loss must be subtracted from the electrical energy input. However, using Eelec=300 JE_{\text{elec}} = 300\text{ J} caused your final value for ΔU\Delta U to be 275 J275\text{ J} instead of 125 J125\text{ J}.

  3. Step 3

    ΔU=n⋅(32R)⋅ΔT  ⟹  275 J=(0.500 mol)⋅(1.5⋅8.314 J/(mol⋅K))⋅ΔT  ⟹  ΔT=275 J6.2355 J/K=44.1 K\Delta U = n \cdot \left(\frac{3}{2}R\right) \cdot \Delta T \implies 275\text{ J} = (0.500\text{ mol}) \cdot (1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})) \cdot \Delta T \implies \Delta T = \frac{275\text{ J}}{6.2355\text{ J/K}} = 44.1\text{ K}

    Correct

    ΔT=ΔUnCV=125 J0.500 mol⋅(32⋅8.314 J/(mol⋅K))=125 J6.2355 J/K≈20.0 K\Delta T = \frac{\Delta U}{n C_V} = \frac{125\text{ J}}{0.500\text{ mol} \cdot \left(\frac{3}{2} \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})\right)} = \frac{125\text{ J}}{6.2355\text{ J/K}} \approx 20.0\text{ K}

    You selected the correct heat capacity formula CV=32RC_V = \frac{3}{2}R and isolated ΔT\Delta T without any algebraic errors. This step is marked as affected solely because it inherited the incorrect value of ΔU\Delta U from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a rigid, sealed container performs zero boundary work (W=0W = 0).

You properly accounted for heat leakage by subtracting QlossQ_{\text{loss}} from the energy input to find QnetQ_{\text{net}}.

You correctly used the molar heat capacity at constant volume CV=32RC_V = \frac{3}{2}R for a monatomic ideal gas and solved for ΔT\Delta T with accurate arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Exponent in Joule Heating Formula

You wrote E=IRΔtE = I R \Delta t instead of E=I2RΔtE = I^2 R \Delta t, confusing voltage (V=IRV = I R) with electrical power (P=I2RP = I^2 R).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating Ohm's law (V=IRV = IR) with Joule heating power (P=IV=I2R=V2RP = I V = I^2 R = \frac{V^2}{R}) led you to omit the exponent on the current term.

REASONING PATH
Your ACEpath teacher’s suggested approach
Joule Heating Formula Verification
  • Electrical power dissipated across a resistor of resistance RR with current II is P=I2RP = I^2 R. The total energy delivered over time Δt\Delta t is E=PΔt=I2RΔtE = P \Delta t = I^2 R \Delta t.

  • Before calculating energy, write down P=IVP = I V and replace VV with IRI R to ensure you carry the squared factor: P=I(IR)=I2RP = I(IR) = I^2 R.

Dimensional / Unit Sanity Check
  • The product I⋅RI \cdot R has units of volts (potential difference), not watts (power). Multiplying volts by seconds gives V⋅s=Wb\text{V}\cdot\text{s} = \text{Wb} (magnetic flux), not joules.

  • Check your units: A2⋅Ω⋅s=W⋅s=J\text{A}^2 \cdot \Omega \cdot \text{s} = \text{W} \cdot \text{s} = \text{J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct electrical energy using Joule heating: Eelec=I2RresΔt=(0.500 A)2⋅(10.0 Ω)⋅(60.0 s)=0.250⋅600=150 JE_{\text{elec}} = I^2 R_{\text{res}} \Delta t = (0.500\text{ A})^2 \cdot (10.0\ \Omega) \cdot (60.0\text{ s}) = 0.250 \cdot 600 = 150\text{ J}.

  2. Apply the First Law with W=0W = 0: ΔU=Eelec−Qloss=150 J−25.0 J=125 J\Delta U = E_{\text{elec}} - Q_{\text{loss}} = 150\text{ J} - 25.0\text{ J} = 125\text{ J}.

  3. Compute the temperature change: ΔT=ΔUnCV=125 J0.500 mol⋅1.5⋅8.314 J/(mol⋅K)=125 J6.2355 J/K≈20.0 K\Delta T = \frac{\Delta U}{n C_V} = \frac{125\text{ J}}{0.500\text{ mol} \cdot 1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})} = \frac{125\text{ J}}{6.2355\text{ J/K}} \approx 20.0\text{ K}.

Final answer

(a) Eelec=150 JE_{\text{elec}} = 150\text{ J}; (b) ΔU=125 J\Delta U = 125\text{ J}; (c) ΔT=20.0 K\Delta T = 20.0\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three equivalent forms of Joule's power law: P=IV=I2R=V2RP = IV = I^2 R = \frac{V^2}{R}.

  • Perform unit consistency checks whenever calculating electrical thermal input to ensure your power term has units of watts.

OverviewACEpath Teacher's Diagnosis

02 The student adds the leaked heat to the energy supplied rather than subtracting it when finding net internal energy change.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Eelec=I2⋅Rres⋅Δt  ⟹  Eelec=(0.500 A)2⋅(10.0 Ω)⋅(60.0 s)=150 JE_{\text{elec}} = I^2 \cdot R_{\text{res}} \cdot \Delta t \implies E_{\text{elec}} = (0.500\text{ A})^2 \cdot (10.0\ \Omega) \cdot (60.0\text{ s}) = 150\text{ J}

  2. Step 2

    W=0 J  ⟹  ΔU=Eelec+Qloss=150 J+25.0 J=175 JW = 0\text{ J} \implies \Delta U = E_{\text{elec}} + Q_{\text{loss}} = 150\text{ J} + 25.0\text{ J} = 175\text{ J}

    Correct

    ΔU=Qnet−W=(Eelec−Qloss)−0 J=150 J−25.0 J=125 J\Delta U = Q_{\text{net}} - W = (E_{\text{elec}} - Q_{\text{loss}}) - 0\text{ J} = 150\text{ J} - 25.0\text{ J} = 125\text{ J}

    You recognized that no boundary work is done (W=0W = 0), but you added the energy lost to the surroundings instead of subtracting it. Energy leaving the system reduces the net internal energy.

  3. Step 3

    ΔU=n⋅CV⋅ΔT  ⟹  ΔT=ΔUn⋅1.5⋅R  ⟹  ΔT=175 J0.500 mol⋅1.5⋅8.314 J/(mol⋅K)=28.1 K\Delta U = n \cdot C_V \cdot \Delta T \implies \Delta T = \frac{\Delta U}{n \cdot 1.5 \cdot R} \implies \Delta T = \frac{175\text{ J}}{0.500\text{ mol} \cdot 1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})} = 28.1\text{ K}

    Correct

    ΔT=ΔUnCV=125 J0.500 mol⋅32(8.314 J/(mol⋅K))≈20.0 K\Delta T = \frac{\Delta U}{n C_V} = \frac{125\text{ J}}{0.500\text{ mol} \cdot \frac{3}{2}(8.314\text{ J}/(\text{mol}\cdot\text{K}))} \approx 20.0\text{ K}

    You rearranged the internal energy equation and evaluated it accurately, but substituting the incorrect value of ΔU=175 J\Delta U = 175\text{ J} caused your final temperature rise to be too high.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the electrical heating energy accurately using Joule heating.

You correctly deduced that a rigid, sealed container performs zero mechanical boundary work.

You correctly used the molar heat capacity relationship ΔU=nCVΔT\Delta U = n C_V \Delta T for a monatomic ideal gas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
First Law Sign Convention for Heat Loss

You accidentally added the leaked thermal energy QlossQ_{\text{loss}} rather than subtracting it from the input energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing energy inputs and energy outputs in the thermal energy balance equation ΔU=Qin−Qout−W\Delta U = Q_{\text{in}} - Q_{\text{out}} - W.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermodynamic Sign Convention
  • Energy transferred into a system is positive (+Qin+Q_{\text{in}}), while energy leaking or escaping out of the system is negative (−Qout-Q_{\text{out}}).

  • Always write the net heat explicitly as Qnet=Qin−QoutQ_{\text{net}} = Q_{\text{in}} - Q_{\text{out}} before calculating ΔU\Delta U.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract the thermal leakage from the electrical energy input: Qnet=Eelec−Qloss=150 J−25.0 J=125 JQ_{\text{net}} = E_{\text{elec}} - Q_{\text{loss}} = 150\text{ J} - 25.0\text{ J} = 125\text{ J}.

  2. Since the container has fixed volume, W=0W = 0, so ΔU=Qnet=125 J\Delta U = Q_{\text{net}} = 125\text{ J}.

  3. Substitute ΔU=125 J\Delta U = 125\text{ J} into the temperature change formula: ΔT=125 J0.500 mol⋅1.5⋅8.314 J/(mol⋅K)=1256.2355 K≈20.0 K\Delta T = \frac{125\text{ J}}{0.500\text{ mol} \cdot 1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K})} = \frac{125}{6.2355}\text{ K} \approx 20.0\text{ K}.

Final answer

(a) Eelec=150 JE_{\text{elec}} = 150\text{ J}; (b) ΔU=125 J\Delta U = 125\text{ J}; (c) ΔT=20.0 K\Delta T = 20.0\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an energy-flow boundary diagram with labeled inward and outward arrows before combining thermal values.

  • Verify that escaping heat always decreases the system's final internal energy compared to a perfectly insulated case.

OverviewACEpath Teacher's Diagnosis

03 The student uses the constant-pressure molar heat capacity C_P = (5/2)R instead of the constant-volume molar heat capacity C_V = (3/2)R for a fixed-volume process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Eelec=I2⋅Rres⋅Δt  ⟹  Eelec=(0.500 A)2⋅(10.0 Ω)⋅(60.0 s)=150 JE_{\text{elec}} = I^2 \cdot R_{\text{res}} \cdot \Delta t \implies E_{\text{elec}} = (0.500\text{ A})^2 \cdot (10.0\ \Omega) \cdot (60.0\text{ s}) = 150\text{ J}

  2. Step 2

    W=0 J  ⟹  ΔU=Eelec−Qloss=150 J−25.0 J=125 JW = 0\text{ J} \implies \Delta U = E_{\text{elec}} - Q_{\text{loss}} = 150\text{ J} - 25.0\text{ J} = 125\text{ J}

  3. Step 3

    C=52⋅R=2.5⋅8.314 J/(mol⋅K)=20.785 J/(mol⋅K)C = \frac{5}{2} \cdot R = 2.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 20.785\text{ J}/(\text{mol}\cdot\text{K})

    Correct

    CV=32R=1.5⋅8.314 J/(mol⋅K)=12.471 J/(mol⋅K)C_V = \frac{3}{2} R = 1.5 \cdot 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 12.471\text{ J}/(\text{mol}\cdot\text{K})

    You used the constant-pressure molar heat capacity CP=52RC_P = \frac{5}{2}R instead of the constant-volume molar heat capacity CV=32RC_V = \frac{3}{2}R. Because the calorimeter has a fixed volume and for any ideal gas ΔU=nCVΔT\Delta U = n C_V \Delta T, the factor must be 32R\frac{3}{2}R.

  4. Step 4

    ΔU=n⋅C⋅ΔT  ⟹  ΔT=125 J0.500 mol⋅20.785 J/(mol⋅K)=12.0 K\Delta U = n \cdot C \cdot \Delta T \implies \Delta T = \frac{125\text{ J}}{0.500\text{ mol} \cdot 20.785\text{ J}/(\text{mol}\cdot\text{K})} = 12.0\text{ K}

    Correct

    ΔT=ΔUnCV=125 J0.500 mol⋅12.471 J/(mol⋅K)≈20.0 K\Delta T = \frac{\Delta U}{n C_V} = \frac{125\text{ J}}{0.500\text{ mol} \cdot 12.471\text{ J}/(\text{mol}\cdot\text{K})} \approx 20.0\text{ K}

    Your formula arrangement and arithmetic were carried out correctly, but your numerical answer was altered by the incorrect heat capacity value from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Joule's heating equation to determine the electrical input energy.

You correctly applied the First Law of Thermodynamics, accounting for zero boundary work and energy leakage.

You set up the relation between internal energy and temperature change with correct algebraic rearrangement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Heat Capacity Selection (Cp vs Cv)

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the constant-pressure molar heat capacity CP=52RC_P = \frac{5}{2}R rather than CV=32RC_V = \frac{3}{2}R. Internal energy of an ideal gas always depends strictly on temperature via ΔU=nCVΔT\Delta U = n C_V \Delta T, and the rigid calorimeter maintains a constant volume process where no expansion work occurs.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify System Constraints
  • A rigid, sealed vessel enforces ΔV=0\Delta V = 0 (isochoric process).

  • Look for keywords like 'rigid', 'fixed volume', or 'sealed bomb' to immediately flag that volume is constant.

Internal Energy vs Heat Capacity
  • For any ideal gas process, ΔU=nCVΔT\Delta U = n C_V \Delta T regardless of whether pressure or volume varies.

  • Always pair ΔU\Delta U directly with CV=32RC_V = \frac{3}{2}R for a monatomic gas; reserve CP=52RC_P = \frac{5}{2}R for enthalpy changes ΔH\Delta H or constant-pressure heat transfer QPQ_P.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that for a monatomic ideal gas at constant volume, CV=32R=1.5×8.314 J/(mol⋅K)=12.471 J/(mol⋅K)C_V = \frac{3}{2}R = 1.5 \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 12.471\text{ J}/(\text{mol}\cdot\text{K}).

  2. Apply the internal energy relationship ΔU=nCVΔT\Delta U = n C_V \Delta T and solve for ΔT\Delta T: ΔT=ΔUnCV\Delta T = \frac{\Delta U}{n C_V}.

  3. Substitute the known values: ΔT=125 J0.500 mol×12.471 J/(mol⋅K)=1256.2355 K≈20.0 K\Delta T = \frac{125\text{ J}}{0.500\text{ mol} \times 12.471\text{ J}/(\text{mol}\cdot\text{K})} = \frac{125}{6.2355}\text{ K} \approx 20.0\text{ K}.

Final answer

(a) Eelec=150 JE_{\text{elec}} = 150\text{ J}; (b) ΔU=125 J\Delta U = 125\text{ J}; (c) ΔT=20.0 K\Delta T = 20.0\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between CVC_V and CPC_P using the ideal gas relation CP=CV+RC_P = C_V + R.

  • Practice identifying whether a thermodynamic process involves boundary work or fixed boundary constraints before choosing heat capacity formulas.

Lock it in

Similar question

01

A heating element with resistance R=20.0 ΩR = 20.0\ \Omega operates at a current of I=2.00 AI = 2.00\text{ A} for 30.0 s30.0\text{ s} inside a thermally insulated container holding an ideal gas. If no heat leaks out and no work is done, what is the change in internal energy ΔU\Delta U of the gas?

Answer

Eelec=I2RΔt=(2.00 A)2⋅20.0 Ω⋅30.0 s=4.00⋅600=2400 JE_{\text{elec}} = I^2 R \Delta t = (2.00\text{ A})^2 \cdot 20.0\ \Omega \cdot 30.0\text{ s} = 4.00 \cdot 600 = 2400\text{ J}. Since Qloss=0Q_{\text{loss}} = 0 and W=0W = 0, ΔU=Q=2400 J\Delta U = Q = 2400\text{ J} (or 2.40 kJ2.40\text{ kJ}).

02

A rigid tank contains 1.00 mol1.00\text{ mol} of helium gas (CV=32RC_V = \frac{3}{2}R). An internal resistor of R=8.00 ΩR = 8.00\ \Omega is supplied with I=1.50 AI = 1.50\text{ A} for 40.0 s40.0\text{ s}. During this time, 120 J120\text{ J} of heat escapes through the tank walls. Calculate the resulting temperature rise ΔT\Delta T of the helium.

Answer
  1. Electrical energy: Eelec=I2RΔt=(1.50)2⋅8.00⋅40.0=2.25⋅320=720 JE_{\text{elec}} = I^2 R \Delta t = (1.50)^2 \cdot 8.00 \cdot 40.0 = 2.25 \cdot 320 = 720\text{ J}.\n2. Net heat / internal energy change (W=0W = 0): ΔU=Eelec−Qloss=720 J−120 J=600 J\Delta U = E_{\text{elec}} - Q_{\text{loss}} = 720\text{ J} - 120\text{ J} = 600\text{ J}.\n3. Temperature rise: ΔT=ΔUnCV=6001.00⋅1.5⋅8.314=60012.471≈48.1 K\Delta T = \frac{\Delta U}{n C_V} = \frac{600}{1.00 \cdot 1.5 \cdot 8.314} = \frac{600}{12.471} \approx 48.1\text{ K}.
03

A cylinder fitted with a frictionless piston contains 0.400 mol0.400\text{ mol} of an ideal monatomic gas (CV=32RC_V = \frac{3}{2}R, CP=52RC_P = \frac{5}{2}R) maintained at a constant pressure. An internal coil (R=5.00 ΩR = 5.00\ \Omega) carries a current of I=1.20 AI = 1.20\text{ A} for 50.0 s50.0\text{ s}, while 60.0 J60.0\text{ J} of heat leaks to the surroundings. Find: (a) the net heat added QnetQ_{\text{net}}, (b) the temperature change ΔT\Delta T, and (c) the work WW done by the expanding gas.

Answer

(a) Eelec=I2RΔt=(1.20)2⋅5.00⋅50.0=1.44⋅250=360 JE_{\text{elec}} = I^2 R \Delta t = (1.20)^2 \cdot 5.00 \cdot 50.0 = 1.44 \cdot 250 = 360\text{ J}. Thus Qnet=360 J−60.0 J=300 JQ_{\text{net}} = 360\text{ J} - 60.0\text{ J} = 300\text{ J}.\n(b) At constant pressure, Qnet=nCPΔT=n(52R)ΔTQ_{\text{net}} = n C_P \Delta T = n \left(\frac{5}{2}R\right) \Delta T. Thus ΔT=300 J0.400⋅2.5⋅8.314 J/K=3008.314≈36.1 K\Delta T = \frac{300\text{ J}}{0.400 \cdot 2.5 \cdot 8.314\text{ J/K}} = \frac{300}{8.314} \approx 36.1\text{ K}.\n(c) ΔU=nCVΔT=0.400⋅1.5⋅8.314⋅36.08=180 J\Delta U = n C_V \Delta T = 0.400 \cdot 1.5 \cdot 8.314 \cdot 36.08 = 180\text{ J}. By the First Law, W=Qnet−ΔU=300 J−180 J=120 JW = Q_{\text{net}} - \Delta U = 300\text{ J} - 180\text{ J} = 120\text{ J}.

Loading workspace…