Resources

An astronomical camera employs a telephoto converging lens with a focal length of f=+500 mmf = +500\text{ mm} to image distant targets. (a) Evaluate the limiting image position did_i and the lateral magnification mm as the object distance approaches infinity (do→∞d_o \to \infty). (b) A crater on the Moon, which has an effective diameter of ho=85.0 kmh_o = 85.0\text{ km} and an average orbital distance of do=3.84×105 kmd_o = 3.84 \times 10^5\text{ km} from the lens, is photographed. Using asymptotic ray tracing approximations (do≫fd_o \gg f), calculate the diameter of the crater's image hih_i formed on the camera's digital focal plane sensor in millimeters.

Answer and steps

Final answer

(a) lim⁡do→∞di=f=+500 mm\lim_{d_o \to \infty} d_i = f = +500\text{ mm} (at the back focal point) and lim⁡do→∞m=0\lim_{d_o \to \infty} m = 0; (b) ∣hi∣=0.111 mm|h_i| = 0.111\text{ mm}.

Steps

Part (a): Limiting Image Position and Magnification

  1. Apply the Thin-Lens Equation:
    The relationship between the object distance dod_o, image distance did_i, and focal length ff of a converging lens is given by: 1do+1di=1f\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f}
  2. Evaluate the Limit as do→∞d_o \to \infty:
    As the object distance approaches infinity, the incident light rays become virtually parallel to one another: lim⁡do→∞1do=0\lim_{d_o \to \infty} \frac{1}{d_o} = 0 Substituting this into the lens equation: 0+1di=1f  ⟹  lim⁡do→∞di=f=+500 mm0 + \frac{1}{d_i} = \frac{1}{f} \implies \lim_{d_o \to \infty} d_i = f = +500\text{ mm} This indicates that light from an infinitely distant source converges precisely at the rear focal point of the lens.
  3. Evaluate the Lateral Magnification:
    The lateral magnification mm is defined as: m=−didom = -\frac{d_i}{d_o} Taking the limit as do→∞d_o \to \infty while di→fd_i \to f: lim⁡do→∞m=−lim⁡do→∞fdo=0\lim_{d_o \to \infty} m = -\lim_{d_o \to \infty} \frac{f}{d_o} = 0

Part (b): Image Diameter of the Lunar Crater

  1. Use the Asymptotic Approximation (do≫fd_o \gg f):
    Because the orbital distance to the Moon (do=3.84×105 kmd_o = 3.84 \times 10^5\text{ km}) is overwhelmingly larger than the lens focal length (f=500 mm=5.00×10−4 kmf = 500\text{ mm} = 5.00 \times 10^{-4}\text{ km}), the image forms directly in the focal plane: di≈f=500 mmd_i \approx f = 500\text{ mm}
  2. Relate the Object and Image Heights:
    The angular size θ\theta subtended by the crater at the lens is identical to the angular size subtended by the image from the optical center (using similar triangles from the chief ray passing undeviated through the center of the lens): θ≈hodo=∣hi∣di≈∣hi∣f\theta \approx \frac{h_o}{d_o} = \frac{|h_i|}{d_i} \approx \frac{|h_i|}{f} Rearranging for the image size ∣hi∣|h_i|: ∣hi∣=ho⋅fdo|h_i| = h_o \cdot \frac{f}{d_o}
  3. Substitute the Given Values:
    Keeping hoh_o and dod_o in kilometers so their units cancel directly: ∣hi∣=(85.0 km)⋅500 mm3.84×105 km|h_i| = (85.0\text{ km}) \cdot \frac{500\text{ mm}}{3.84 \times 10^5\text{ km}} ∣hi∣=425003.84×105 mm≈0.1107 mm≈0.111 mm|h_i| = \frac{42500}{3.84 \times 10^5}\text{ mm} \approx 0.1107\text{ mm} \approx 0.111\text{ mm}

Common Pitfall: Converting some lengths to meters while leaving others in kilometers can introduce powers-of-ten errors. As long as hoh_o and dod_o share the same units, the resulting image dimension ∣hi∣|h_i| automatically inherits the units of ff.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the focal length from millimeters to kilometers (or object distance to millimeters), resulting in a calculated image diameter that is off by a factor of 10^6.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1di=1f−1do=1500−0=1500  ⟹  di=500 mm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{500} - 0 = \frac{1}{500} \implies d_i = 500\text{ mm}, m=−dido=−500∞=0m = -\frac{d_i}{d_o} = -\frac{500}{\infty} = 0

  2. Step 2

    di≈f=500 mm  ⟹  hi=(85.0)(500)3.84×105d_i \approx f = 500\text{ mm} \implies h_i = \frac{(85.0)(500)}{3.84 \times 10^5}

  3. Step 3

    hi=425003.84×105=0.111 km  ⟹  hi=1.11×105 mmh_i = \frac{42500}{3.84 \times 10^5} = 0.111\text{ km} \implies h_i = 1.11 \times 10^5\text{ mm}

    Correct

    ∣hi∣=(85.0 km)(500 mm)3.84×105 km=0.111 mm|h_i| = \frac{(85.0\text{ km})(500\text{ mm})}{3.84 \times 10^5\text{ km}} = 0.111\text{ mm}

    Because both hoh_o (85.0 km85.0\text{ km}) and dod_o (3.84×105 km3.84 \times 10^5\text{ km}) were entered in kilometers, their units cancel out in the ratio hodo\frac{h_o}{d_o}. The resulting value inherits the unit of focal length ff, which was already 500 mm500\text{ mm}. Treating 0.1110.111 as kilometers and multiplying by 10610^6 made the final image size 10610^6 times too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You evaluated the limit of the thin-lens equation as do→∞d_o \to \infty to find di=500 mmd_i = 500\text{ mm}.

You determined that the lateral magnification approaches zero as the object distance approaches infinity.

You used the small-angle or similar-triangle approximation ∣hi∣≈hofdo|h_i| \approx h_o \frac{f}{d_o} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Tracking in Dimensionless Ratios

You assigned kilometers instead of millimeters to the quotient 0.1110.111.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When substituting mixed units into a product or ratio, you calculated the numbers without canceling units algebraically. In the expression hi=f⋅(hodo)h_i = f \cdot \left(\frac{h_o}{d_o}\right), the ratio hodo\frac{h_o}{d_o} is dimensionless because both quantities are in kilometers, leaving the final answer directly in the units of ff (millimeters).

REASONING PATH
Your ACEpath teacher’s suggested approach
Carry Units Through Every Substitution
  • Always write explicit unit labels inside your calculation step: (km)⋅(mm)km=mm\frac{(\text{km}) \cdot (\text{mm})}{\text{km}} = \text{mm}.

  • Cancel identical units in numerators and denominators before writing down the final unit of the result.

Physical Reasonableness Check
  • A camera sensor is typically a few centimeters across, so an image formed on it must be on the scale of millimeters, not hundreds of meters.

  • Compare your calculated image size (1.11×105 mm=111 m1.11 \times 10^5\text{ mm} = 111\text{ m}) against the physical size of a camera sensor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include units explicitly in the fraction: ∣hi∣=(85.0 km)⋅(500 mm)3.84×105 km|h_i| = \frac{(85.0\text{ km}) \cdot (500\text{ mm})}{3.84 \times 10^5\text{ km}}.

  2. Cancel the unit km\text{km} from the numerator and denominator: kmkm=1\frac{\text{km}}{\text{km}} = 1.

  3. Compute the numerical value with the remaining unit: ∣hi∣=425003.84×105 mm≈0.111 mm|h_i| = \frac{42500}{3.84 \times 10^5}\text{ mm} \approx 0.111\text{ mm}.

Final answer

∣hi∣=0.111 mm|h_i| = 0.111\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write units alongside numbers at every intermediate step rather than adding a unit at the end.

  • Check whether your ratio is dimensionless: if hodo\frac{h_o}{d_o} has matching units, the result inherits the unit of ff.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the magnification ratio as d_o/f instead of f/d_o, leading to an impossibly large image size.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1∞+1di=1500 mm  ⟹  di=500 mm  ⟹  m=−dido→0\frac{1}{\infty} + \frac{1}{d_i} = \frac{1}{500\text{ mm}} \implies d_i = 500\text{ mm} \implies m = -\frac{d_i}{d_o} \to 0

  2. Step 2

    di≈f=0.5 m=5.0×10−4 km  ⟹  hiho=dof  ⟹  hi=ho(dof)d_i \approx f = 0.5\text{ m} = 5.0 \times 10^{-4}\text{ km} \implies \frac{h_i}{h_o} = \frac{d_o}{f} \implies h_i = h_o \left(\frac{d_o}{f}\right)

    Correct

    ∣hi∣ho=dido≈fdo  ⟹  ∣hi∣=ho(fdo)\frac{|h_i|}{h_o} = \frac{d_i}{d_o} \approx \frac{f}{d_o} \implies |h_i| = h_o \left(\frac{f}{d_o}\right)

    You inverted the magnification proportion. By similar triangles from the chief ray, the magnification magnitude is ∣hi∣ho=dido≈fdo\frac{|h_i|}{h_o} = \frac{d_i}{d_o} \approx \frac{f}{d_o}, not dof\frac{d_o}{f}.

  3. Step 3

    hi=85.0×(3.84×1055.0×10−4)=6.53×1010 km  ⟹  hi=6.53×1016 mmh_i = 85.0 \times \left(\frac{3.84 \times 10^5}{5.0 \times 10^{-4}}\right) = 6.53 \times 10^{10}\text{ km} \implies h_i = 6.53 \times 10^{16}\text{ mm}

    Correct

    ∣hi∣=85.0 km×(500 mm3.84×105 km)≈0.111 mm|h_i| = 85.0\text{ km} \times \left(\frac{500\text{ mm}}{3.84 \times 10^5\text{ km}}\right) \approx 0.111\text{ mm}

    Because you used the inverted ratio dof\frac{d_o}{f}, your arithmetic propagated the error to yield an impossibly large astronomical image dimension instead of a sub-millimeter image on the sensor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the thin-lens equation to determine that parallel rays converge at the focal plane.

You evaluated the limit of lateral magnification to be zero as the object distance approaches infinity.

You correctly converted units between meters, kilometers, and millimeters during your calculations.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted magnification ratio

You set the magnification magnitude to dof\frac{d_o}{f} instead of fdo\frac{f}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the object-to-image distance ratio with the image-to-object ratio when relating linear dimensions to angular subtenses.

REASONING PATH
Your ACEpath teacher’s suggested approach
Magnification definition
  • Lateral magnification is always the ratio of image dimension to object dimension: ∣m∣=∣hi∣ho=dido|m| = \frac{|h_i|}{h_o} = \frac{d_i}{d_o}.

  • Ensure that the numerator corresponds to the image and the denominator corresponds to the object on both sides of the proportion.

Sanity check on distant targets
  • For distant objects (do≫fd_o \gg f), the image formed on a camera sensor must be drastically smaller than the physical object (∣m∣≪1|m| \ll 1).

  • Always check if your calculated image size is physically plausible for a camera sensor before finalizing your answer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct magnification relation: ∣hi∣ho=dido≈fdo\frac{|h_i|}{h_o} = \frac{d_i}{d_o} \approx \frac{f}{d_o}.

  2. Express the image diameter directly: ∣hi∣=ho(fdo)|h_i| = h_o \left(\frac{f}{d_o}\right).

  3. Substitute the given quantities: ∣hi∣=(85.0 km)×500 mm3.84×105 km|h_i| = (85.0\text{ km}) \times \frac{500\text{ mm}}{3.84 \times 10^5\text{ km}}.

  4. Evaluate the numerical result: ∣hi∣=425003.84×105 mm≈0.111 mm|h_i| = \frac{42500}{3.84 \times 10^5}\text{ mm} \approx 0.111\text{ mm}.

Final answer

∣hi∣≈0.111 mm|h_i| \approx 0.111\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review ray diagrams for chief rays passing undeviated through the optical center to visually reinforce why hiho=dido\frac{h_i}{h_o} = \frac{d_i}{d_o}.

  • Practice using the angular size relation θ=hodo=∣hi∣f\theta = \frac{h_o}{d_o} = \frac{|h_i|}{f} when dealing with telescopic or telephoto systems.

  • Perform a physical sanity check whenever calculating sizes in optical instruments to ensure images fit onto physical sensors.

OverviewACEpath Teacher's Diagnosis

03 The student assumes the magnification as object distance goes to infinity is 1 instead of 0, carrying a unit magnification assumption.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1di=1f=1500 mm  ⟹  di=500 mm\frac{1}{d_i} = \frac{1}{f} = \frac{1}{500\text{ mm}} \implies d_i = 500\text{ mm}

  2. Step 2

    m=1m = 1

    Correct

    lim⁡do→∞m=−lim⁡do→∞dido=−lim⁡do→∞fdo=0\lim_{d_o \to \infty} m = -\lim_{d_o \to \infty} \frac{d_i}{d_o} = -\lim_{d_o \to \infty} \frac{f}{d_o} = 0

    You set the lateral magnification to 11. Lateral magnification is defined as m=−didom = -\frac{d_i}{d_o}. As the object distance do→∞d_o \to \infty while di→fd_i \to f, the ratio f∞\frac{f}{\infty} approaches 00.

  3. Step 3

    f=5.00×10−4 kmf = 5.00 \times 10^{-4}\text{ km}, di≈f  ⟹  hi=ho(fdo)d_i \approx f \implies h_i = h_o\left(\frac{f}{d_o}\right)

  4. Step 4

    hi=85.0×(5.00×10−43.84×105)=1.11×10−7 km  ⟹  hi=0.111 mmh_i = 85.0 \times \left(\frac{5.00 \times 10^{-4}}{3.84 \times 10^5}\right) = 1.11 \times 10^{-7}\text{ km} \implies h_i = 0.111\text{ mm}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found that parallel rays from an infinitely distant object converge at the back focal length di=f=500 mmd_i = f = 500\text{ mm}.

You correctly related the object height and image height using similar triangles and angular size.

You handled the unit conversions and arithmetic accurately to arrive at hi=0.111 mmh_i = 0.111\text{ mm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Limiting magnification evaluation

No

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed unit magnification (m=1m = 1) for distant objects rather than evaluating the limit of the magnification formula m=−didom = -\frac{d_i}{d_o} as the object distance dod_o grows without bound.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate magnification by definition
  • m=−didom = -\frac{d_i}{d_o}

  • Substitute the limiting values di→fd_i \to f and do→∞d_o \to \infty to evaluate the ratio directly: f∞=0\frac{f}{\infty} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of lateral magnification: m=−didom = -\frac{d_i}{d_o}.

  2. Substitute the limiting image distance di=fd_i = f as do→∞d_o \to \infty: lim⁡do→∞m=−lim⁡do→∞fdo\lim_{d_o \to \infty} m = -\lim_{d_o \to \infty} \frac{f}{d_o}.

  3. Because ff is finite and do→∞d_o \to \infty, the quotient evaluates to 00.

Final answer

(a) di=+500 mmd_i = +500\text{ mm}, m=0m = 0; (b) ∣hi∣=0.111 mm|h_i| = 0.111\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the limiting behaviors of did_i and mm for thin lenses as do→∞d_o \to \infty versus when do=2fd_o = 2f (where ∣m∣=1|m| = 1).

  • Practice finding angular magnification versus lateral magnification for optical instruments imaging distant objects.

Lock it in

Similar question

01

A telephoto lens with focal length f=300 mmf = 300\text{ mm} photographs a high-altitude weather balloon of diameter ho=12.0 mh_o = 12.0\text{ m} floating at a distance of do=24.0 kmd_o = 24.0\text{ km}. Using the asymptotic approximation (do≫fd_o \gg f), calculate the diameter of the balloon's image hih_i on the sensor in millimeters.

Answer

0.150 mm0.150\text{ mm}. Key steps: Convert object dimensions to matching units: ho=12.0 m=0.0120 kmh_o = 12.0\text{ m} = 0.0120\text{ km}. Then ∣hi∣=f⋅hodo=300 mm×0.0120 km24.0 km=300 mm×5.00×10−4=0.150 mm|h_i| = f \cdot \frac{h_o}{d_o} = 300\text{ mm} \times \frac{0.0120\text{ km}}{24.0\text{ km}} = 300\text{ mm} \times 5.00 \times 10^{-4} = 0.150\text{ mm}.

02

An astronomer uses a telescope with focal length f=2.00 mf = 2.00\text{ m} to image Jupiter. Jupiter has an equatorial diameter of ho=1.43×105 kmh_o = 1.43 \times 10^5\text{ km} and is at a distance of do=6.28×108 kmd_o = 6.28 \times 10^8\text{ km} from Earth. Find the diameter of Jupiter's image in the telescope's focal plane in millimeters.

Answer

0.455 mm0.455\text{ mm}. Key steps: The angular diameter is θ=hodo=1.43×105 km6.28×108 km≈2.277×10−4 rad\theta = \frac{h_o}{d_o} = \frac{1.43 \times 10^5\text{ km}}{6.28 \times 10^8\text{ km}} \approx 2.277 \times 10^{-4}\text{ rad}. The image diameter is ∣hi∣=fθ=(2000 mm)(2.277×10−4)≈0.455 mm|h_i| = f \theta = (2000\text{ mm})(2.277 \times 10^{-4}) \approx 0.455\text{ mm}.

03

A spy satellite camera with a focal length of f=1.50 mf = 1.50\text{ m} orbits Earth at an altitude of do=300 kmd_o = 300\text{ km}. If a digital detector has pixels of width w=3.0 \mumw = 3.0\text{ \mu m}, determine the minimum physical ground size hoh_o (in meters) of an object whose image spans at least 22 pixels.

Answer

1.2 m1.2\text{ m}. Key steps: Required image size is ∣hi∣=2×3.0 \mum=6.0×10−6 m|h_i| = 2 \times 3.0\text{ \mu m} = 6.0 \times 10^{-6}\text{ m}. Using ∣hi∣=ho⋅fdo|h_i| = h_o \cdot \frac{f}{d_o}, rearrange for ho=∣hi∣⋅dof=(6.0×10−6 m)⋅3.00×105 m1.50 m=1.2 mh_o = |h_i| \cdot \frac{d_o}{f} = (6.0 \times 10^{-6}\text{ m}) \cdot \frac{3.00 \times 10^5\text{ m}}{1.50\text{ m}} = 1.2\text{ m}.

Loading workspace…