Resources

A high-performance electric test vehicle brakes along a straight east-west test strip. The vehicle experiences a constant average acceleration of −5.20 m/s2-5.20\text{ m/s}^2 (directed due west) over an elapsed time of 4.50 s4.50\text{ s}, slowing down to a final velocity of 14.5 m/s14.5\text{ m/s} due east. Determine the vehicle's initial velocity at the start of the braking interval.

Answer and steps

Final answer

37.9 m/s37.9\text{ m/s} due east

Steps

01

Establish a Coordinate System and Identify Knowns

In one-dimensional motion, choosing a consistent directional sign convention is essential. Let motion directed toward the east be positive (++) and motion directed toward the west be negative (−-).

From the problem statement:

  • Acceleration: a=−5.20 m/s2a = -5.20\text{ m/s}^2 (directed west)
  • Elapsed time: Δt=4.50 s\Delta t = 4.50\text{ s}
  • Final velocity: v=+14.5 m/sv = +14.5\text{ m/s} (directed east)
  • Initial velocity: v0=?v_0 = ?

02

Apply the Kinematic Relationship

By definition, average acceleration is the rate of change of velocity over time: a=v−v0Δta = \frac{v - v_0}{\Delta t}

Rearranging to solve for the initial velocity v0v_0: v−v0=a⋅Δtv - v_0 = a \cdot \Delta t v0=v−a⋅Δtv_0 = v - a \cdot \Delta t


03

Substitute the Values and Calculate

Substitute the given quantities into the rearranged formula: v0=14.5 m/s−(−5.20 m/s2)(4.50 s)v_0 = 14.5\text{ m/s} - (-5.20\text{ m/s}^2)(4.50\text{ s})

Calculate the product of acceleration and time: (−5.20 m/s2)⋅(4.50 s)=−23.4 m/s(-5.20\text{ m/s}^2) \cdot (4.50\text{ s}) = -23.4\text{ m/s}

Now subtract this change in velocity: v0=14.5 m/s−(−23.4 m/s)=14.5 m/s+23.4 m/s=37.9 m/sv_0 = 14.5\text{ m/s} - (-23.4\text{ m/s}) = 14.5\text{ m/s} + 23.4\text{ m/s} = 37.9\text{ m/s}


04

Interpret the Direction

The resulting value of +37.9 m/s+37.9\text{ m/s} is positive, indicating that the initial velocity is directed due east.

Common Pitfall: When a vehicle slows down, its acceleration opposes the direction of travel. Because the car continues moving east throughout the interval, a westward acceleration reduces its speed. Forgetting that subtracting a negative value results in addition would mistakenly yield a smaller initial velocity than the final velocity.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student treats the acceleration as positive or subtracts the change in velocity, concluding that the vehicle was initially moving slower than its final velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=v0+a⋅tv = v_0 + a \cdot t

  2. Step 2

    14.5=v0+(5.20)(4.50)  ⟹  14.5=v0+23.414.5 = v_0 + (5.20)(4.50) \implies 14.5 = v_0 + 23.4

    Correct

    14.5=v0+(−5.20)(4.50)  ⟹  14.5=v0−23.414.5 = v_0 + (-5.20)(4.50) \implies 14.5 = v_0 - 23.4

    You substituted +5.20 m/s2+5.20\text{ m/s}^2 instead of −5.20 m/s2-5.20\text{ m/s}^2. Since east is chosen as the positive direction, westward acceleration must be entered with a negative sign.

  3. Step 3

    v0=14.5−23.4=−8.9 m/sv_0 = 14.5 - 23.4 = -8.9\text{ m/s}

    Correct

    v0=14.5−(−23.4)=37.9 m/sv_0 = 14.5 - (-23.4) = 37.9\text{ m/s} due east

    Your algebraic rearrangement was executed correctly based on your previous equation, but the missing negative sign carried over and gave an incorrect final velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct kinematic equation for constant acceleration.

You carried out the algebraic rearrangement and arithmetic accurately based on your substituted numbers.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in vector component

You dropped the negative sign on the acceleration when substituting into v=v0+atv = v_0 + at.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating acceleration as an unsigned scalar magnitude rather than a signed vector component directed along the negative axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Establish coordinate signs first
  • Every vector quantity (displacement, velocity, acceleration) in 1D kinematics must carry a sign matching its chosen axis (+ for East/Right/Up, - for West/Left/Down).

  • Write down your sign convention explicitly before substituting values into any formula.

Perform a physical sense-check
  • If a vehicle is moving forward and braking to a slower positive speed, its initial speed must be greater than its final speed.

  • Compare your calculated initial speed with the final speed to ensure it reflects braking rather than reversing.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the coordinate system with east as positive (++) and west as negative (−-).

  2. Substitute a=−5.20 m/s2a = -5.20\text{ m/s}^2 into v=v0+atv = v_0 + at: 14.5=v0+(−5.20)(4.50)14.5 = v_0 + (-5.20)(4.50).

  3. Simplify the product: 14.5=v0−23.414.5 = v_0 - 23.4.

  4. Isolate v0v_0 by adding 23.423.4 to both sides: v0=14.5+23.4=37.9 m/sv_0 = 14.5 + 23.4 = 37.9\text{ m/s}.

Final answer

37.9 m/s37.9\text{ m/s} due east

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice assigning positive and negative signs to 1D vector values before writing kinematic formulas.

  • Verify your final answers with a quick physical intuition check (e.g., braking means v0>vv_0 > v when moving in the positive direction).

OverviewACEpath Teacher's Diagnosis

02 A student confuses initial and final velocity in the definition of acceleration, setting v₀ = 14.5 m/s instead of v = 14.5 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a=v−v0ta = \frac{v - v_0}{t}

  2. Step 2

    −5.20=v−14.54.50-5.20 = \frac{v - 14.5}{4.50}

    Correct

    −5.20=14.5−v04.50-5.20 = \frac{14.5 - v_0}{4.50}

    You substituted 14.5 m/s14.5\text{ m/s} in place of the initial velocity v0v_0 rather than the final velocity vv. The problem specifies that 14.5 m/s14.5\text{ m/s} is the velocity at the end of the braking interval.

  3. Step 3

    v−14.5=−23.4v - 14.5 = -23.4

    Correct

    14.5−v0=−23.414.5 - v_0 = -23.4

    Your multiplication of acceleration and elapsed time (−5.20×4.50=−23.4)(-5.20 \times 4.50 = -23.4) is algebraically correct, but the equation carries forward the swapped velocity variables.

  4. Step 4

    v=−8.9 m/sv = -8.9\text{ m/s}

    Correct

    v0=37.9 m/sv_0 = 37.9\text{ m/s}

    Because of the variable swap in the substitution step, this final calculation yields an incorrect magnitude and direction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly wrote down the formula for average acceleration.

You correctly identified and applied the negative sign for westward acceleration.

You accurately calculated the product of acceleration and elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
swapped initial and final velocity

You assigned the given final velocity to v0v_0 instead of vv.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the chronological order of the states in the problem statement, treating the post-braking speed as the starting condition rather than the target ending condition.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Initial vs. Final States Chronologically
  • In kinematics, v0v_0 represents the velocity at the start (t=0t = 0) and vv represents the velocity at the conclusion of the specified time interval Δt\Delta t.

  • Before substituting into formulas, list your knowns explicitly with their symbols (for example, write v=+14.5 m/sv = +14.5\text{ m/s} and v0=?v_0 = ?) to avoid accidental role reversal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by 4.50 s4.50\text{ s}: 14.5−v0=−5.20×4.50=−23.414.5 - v_0 = -5.20 \times 4.50 = -23.4

  2. Isolate v0v_0 by subtracting 14.514.5 from both sides: −v0=−23.4−14.5=−37.9-v_0 = -23.4 - 14.5 = -37.9

  3. Multiply both sides by −1-1: v0=37.9 m/sv_0 = 37.9\text{ m/s}

Final answer

37.9 m/s37.9\text{ m/s} due east

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out a brief 'Given' list matching problem words like 'slowing down to' or 'starts from' directly to vv or v0v_0.

  • Perform a physical reasonableness check: if an object accelerates westward (slows down while moving east), its starting eastward speed must be greater than its final eastward speed.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly rearranges v = v₀ + at as v₀ = v + at while still plugging in a negative acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0=v+a⋅tv_0 = v + a \cdot t

    Correct

    v=v0+at  ⟹  v0=v−atv = v_0 + a t \implies v_0 = v - a t

    To isolate v0v_0 in the formula v=v0+atv = v_0 + a t, you must subtract ata t from both sides rather than adding it.

  2. Step 2

    v0=14.5+(−5.20)(4.50)  ⟹  v0=14.5−23.4v_0 = 14.5 + (-5.20)(4.50) \implies v_0 = 14.5 - 23.4

    Correct

    v0=14.5−(−5.20)(4.50)  ⟹  v0=14.5−(−23.4)v_0 = 14.5 - (-5.20)(4.50) \implies v_0 = 14.5 - (-23.4)

    Your arithmetic evaluation was carried out cleanly, but this step inherits the incorrect formula from Step 1.

  3. Step 3

    v0=−8.9 m/sv_0 = -8.9\text{ m/s}

    Correct

    v0=37.9 m/sv_0 = 37.9\text{ m/s}

    Because of the rearrangement error in the first step, your final velocity value and sign are incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the given numerical values for final velocity, acceleration, and elapsed time.

You maintained consistent units and correctly computed the product (−5.20)(4.50)=−23.4(-5.20)(4.50) = -23.4.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematic Formula Rearrangement

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You added atat to vv instead of subtracting atat when isolating the initial velocity v0v_0 from v=v0+atv = v_0 + at. A quick physical check confirms that if a car is slowing down while moving east, its starting speed eastward must be greater than its final speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the Unknown Variable Symbolically
  • Start from the standard definition v=v0+aΔtv = v_0 + a\Delta t. Apply inverse operations step-by-step: subtract aΔta\Delta t from both sides to obtain v0=v−aΔtv_0 = v - a\Delta t.

  • Always write down the fundamental definition first before rearranging, and perform the opposite operation (subtraction cancels addition).

Physical Reality Check for Deceleration
  • When an object slows down, its initial speed must be strictly greater than its final speed.

  • Check whether your calculated initial speed is greater than 14.5 m/s14.5\text{ m/s}. An answer of −8.9 m/s-8.9\text{ m/s} suggests the vehicle sped up westward, contradicting the fact that it was braking from an eastward heading.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start with the definition of acceleration: v=v0+atv = v_0 + at

  2. Subtract atat from both sides: v0=v−atv_0 = v - at

  3. Substitute the given values: v0=14.5 m/s−(−5.20 m/s2)(4.50 s)v_0 = 14.5\text{ m/s} - (-5.20\text{ m/s}^2)(4.50\text{ s})

  4. Simplify the signs: v0=14.5 m/s−(−23.4 m/s)=14.5 m/s+23.4 m/s=37.9 m/sv_0 = 14.5\text{ m/s} - (-23.4\text{ m/s}) = 14.5\text{ m/s} + 23.4\text{ m/s} = 37.9\text{ m/s}

Final answer

37.9 m/s37.9\text{ m/s} due east

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables algebraically before plugging in numbers.

  • Always perform a qualitative sense check: if the car is braking while traveling east, its initial speed must be larger than its final speed.

Lock it in

Similar question

01

A train traveling north at an unknown initial speed applies its brakes with a constant acceleration of −1.80 m/s2-1.80\text{ m/s}^2 (directed south). After 12.0 s12.0\text{ s}, its velocity is 15.4 m/s15.4\text{ m/s} north. Find the train's initial velocity.

Answer

37.0 m/s37.0\text{ m/s} north. Using north as positive: v=v0+at  ⟹  15.4=v0+(−1.80)(12.0)=v0−21.6  ⟹  v0=15.4+21.6=37.0 m/sv = v_0 + at \implies 15.4 = v_0 + (-1.80)(12.0) = v_0 - 21.6 \implies v_0 = 15.4 + 21.6 = 37.0\text{ m/s}.

02

A drone moving horizontally toward the right at 28.0 m/s28.0\text{ m/s} activates retro-thrusters, producing a uniform acceleration directed to the left. The drone slows to 6.0 m/s6.0\text{ m/s} to the right over a period of 5.50 s5.50\text{ s}. Determine the acceleration of the drone.

Answer

−4.00 m/s2-4.00\text{ m/s}^2 (or 4.00 m/s24.00\text{ m/s}^2 directed to the left). Taking right as positive: a=v−v0t=6.0−28.05.50=−22.05.50=−4.00 m/s2a = \frac{v - v_0}{t} = \frac{6.0 - 28.0}{5.50} = \frac{-22.0}{5.50} = -4.00\text{ m/s}^2.

03

A remote-control rover initially moving west at 18.0 m/s18.0\text{ m/s} experiences a constant acceleration of +2.50 m/s2+2.50\text{ m/s}^2 directed due east for 10.0 s10.0\text{ s}. What are the final speed and direction of the rover?

Answer

7.0 m/s7.0\text{ m/s} due east. Defining east as positive, v0=−18.0 m/sv_0 = -18.0\text{ m/s} and a=+2.50 m/s2a = +2.50\text{ m/s}^2. Then v=v0+at=−18.0+(2.50)(10.0)=−18.0+25.0=+7.0 m/sv = v_0 + at = -18.0 + (2.50)(10.0) = -18.0 + 25.0 = +7.0\text{ m/s}, which corresponds to 7.0 m/s7.0\text{ m/s} due east.

Loading workspace…