Resources

An engineering specification provides the boiling point of a fluorocarbon refrigerant as 345.6 Rankine345.6\text{ Rankine} (∘R\text{}^{\circ}\text{R}), an absolute temperature scale where TR=TF+459.67T_\text{R} = T_\text{F} + 459.67 and 1.0 K=1.8∘R1.0\text{ K} = 1.8^\circ\text{R}. (a) Convert this temperature directly to kelvins (K\text{K}). (b) Convert the result from kelvins to degrees Celsius (∘C^\circ\text{C}). (c) Determine the temperature in degrees Fahrenheit (∘F^\circ\text{F}). Round each result to two decimal places.

Answer and steps

Final answer

(a) 192.00 K192.00\text{ K}; (b) −81.15∘C-81.15^\circ\text{C}; (c) −114.07∘F-114.07^\circ\text{F}

Steps

Part (a): Convert to Kelvins (K\text{K})

The Rankine scale is an absolute scale proportional to the Kelvin scale, with both sharing the same zero point (0 K=0∘R0\text{ K} = 0^\circ\text{R}). Since 1.0 K=1.8∘R1.0\text{ K} = 1.8^\circ\text{R}, the conversion between temperature in Rankine (TRT_\text{R}) and temperature in kelvins (TKT_\text{K}) is:

TK=TR1.8T_\text{K} = \frac{T_\text{R}}{1.8}

Substitute TR=345.6∘RT_\text{R} = 345.6^\circ\text{R}:

TK=345.61.8=192.00 KT_\text{K} = \frac{345.6}{1.8} = 192.00\text{ K}


Part (b): Convert Kelvins to Degrees Celsius (∘C^\circ\text{C})

The Celsius scale and Kelvin scale have identical degree sizes, but their zero points are offset by 273.15273.15:

TC=TK−273.15T_\text{C} = T_\text{K} - 273.15

Substitute TK=192.00 KT_\text{K} = 192.00\text{ K}:

TC=192.00−273.15=−81.15∘CT_\text{C} = 192.00 - 273.15 = -81.15^\circ\text{C}


Part (c): Determine the Temperature in Degrees Fahrenheit (∘F^\circ\text{F})

The Rankine scale is defined relative to the Fahrenheit scale such that absolute zero corresponds to −459.67∘F-459.67^\circ\text{F}. Rearranging the given formula TR=TF+459.67T_\text{R} = T_\text{F} + 459.67:

TF=TR−459.67T_\text{F} = T_\text{R} - 459.67

Substitute TR=345.6∘RT_\text{R} = 345.6^\circ\text{R}:

TF=345.6−459.67=−114.07∘FT_\text{F} = 345.6 - 459.67 = -114.07^\circ\text{F}

(Alternative check using the Celsius result: TF=1.8⋅TC+32=1.8(−81.15)+32=−146.07+32=−114.07∘FT_\text{F} = 1.8 \cdot T_\text{C} + 32 = 1.8(-81.15) + 32 = -146.07 + 32 = -114.07^\circ\text{F}.)


Pitfall to Avoid

Do not confuse the degree size ratio with the zero-point offset. Absolute scales (Kelvin and Rankine) convert directly by scaling alone (TR=1.8⋅TKT_\text{R} = 1.8 \cdot T_\text{K}), whereas relative scales (Celsius and Fahrenheit) require an additional additive constant because their zero points are defined by different reference states (the freezing point of water versus absolute zero).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student multiplies by 1.8 instead of dividing when converting from Rankine to kelvins, resulting in an incorrectly inflated temperature in kelvins and Celsius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TK=345.6×1.8  ⟹  TK=622.08 KT_\text{K} = 345.6 \times 1.8 \implies T_\text{K} = 622.08\text{ K}

    Correct

    TK=345.61.8=192.00 KT_\text{K} = \frac{345.6}{1.8} = 192.00\text{ K}

    Since 1.0 K=1.8∘R1.0\text{ K} = 1.8^\circ\text{R}, one kelvin is larger than one Rankine degree. To convert from Rankine to kelvins, you need to divide TRT_\text{R} by 1.81.8 rather than multiply by it.

  2. Step 2

    TC=622.08−273.15  ⟹  TC=348.93∘CT_\text{C} = 622.08 - 273.15 \implies T_\text{C} = 348.93^\circ\text{C}

    Correct

    TC=192.00−273.15=−81.15∘CT_\text{C} = 192.00 - 273.15 = -81.15^\circ\text{C}

    Your formula TC=TK−273.15T_\text{C} = T_\text{K} - 273.15 and arithmetic were completely correct, but the result was affected by the value carried over from Part (a).

  3. Step 3

    TF=345.6−459.67  ⟹  TF=−114.07∘FT_\text{F} = 345.6 - 459.67 \implies T_\text{F} = -114.07^\circ\text{F}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated and evaluated TFT_\text{F} using the zero-point offset between Rankine and Fahrenheit.

You knew the exact relationship TC=TK−273.15T_\text{C} = T_\text{K} - 273.15 connecting the Kelvin and Celsius scales.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Factor

Multiplying by 1.81.8 instead of dividing by 1.81.8 when converting from Rankine to kelvins.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the unit equality 1.0 K=1.8∘R1.0\text{ K} = 1.8^\circ\text{R} with the numerical variable formula: since each degree Rankine is smaller, the numerical value in kelvins must be smaller than the numerical value in Rankine (TK=TR/1.8T_\text{K} = T_\text{R} / 1.8).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Analysis Verification
  • Set up conversion ratios so units cancel: TK=TR×(1.0 K1.8∘R)T_\text{K} = T_\text{R} \times \left(\frac{1.0\text{ K}}{1.8^\circ\text{R}}\right).

  • Check that ∘R^\circ\text{R} appears in the denominator to cancel the input unit.

Size-of-Degree Sanity Check
  • 1 K1\text{ K} spans 1.8∘R1.8^\circ\text{R}, meaning a kelvin degree is wider than a Rankine degree.

  • Confirm that the numerical temperature reading in kelvins is smaller than the reading in Rankine.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. TK=TR1.8=345.61.8=192.00 KT_\text{K} = \frac{T_\text{R}}{1.8} = \frac{345.6}{1.8} = 192.00\text{ K}

  2. TC=TK−273.15=192.00−273.15=−81.15∘CT_\text{C} = T_\text{K} - 273.15 = 192.00 - 273.15 = -81.15^\circ\text{C}

Final answer

(a) 192.00 K192.00\text{ K}; (b) −81.15∘C-81.15^\circ\text{C}; (c) −114.07∘F-114.07^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out unit fractions explicitly (e.g., 1 K1.8∘R\frac{1\text{ K}}{1.8^\circ\text{R}}) whenever converting between temperature increments.

  • Perform a quick magnitude check: converting to a larger unit size always reduces the numerical count.

OverviewACEpath Teacher's Diagnosis

02 The student adds 273.15 instead of subtracting it when converting temperature from kelvins to degrees Celsius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TK=345.6/1.8  ⟹  TK=192.00 KT_\text{K} = 345.6 / 1.8 \implies T_\text{K} = 192.00\text{ K}

  2. Step 2

    TC=192.00+273.15  ⟹  TC=465.15∘CT_\text{C} = 192.00 + 273.15 \implies T_\text{C} = 465.15^\circ\text{C}

    Correct

    TC=192.00−273.15=−81.15∘CT_\text{C} = 192.00 - 273.15 = -81.15^\circ\text{C}

    Because 0∘C=273.15 K0^\circ\text{C} = 273.15\text{ K}, the Celsius temperature is lower than the Kelvin value by 273.15273.15. You need to subtract 273.15273.15 from TKT_\text{K} rather than add it.

  3. Step 3

    TF=345.6−459.67  ⟹  TF=−114.07∘FT_\text{F} = 345.6 - 459.67 \implies T_\text{F} = -114.07^\circ\text{F}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the scaling ratio 1.0 K=1.8∘R1.0\text{ K} = 1.8^\circ\text{R} to convert the temperature to kelvins.

You correctly rearranged the relation between Rankine and Fahrenheit to find TFT_\text{F}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted zero-point offset direction

You accidentally added the zero-point offset of 273.15273.15 instead of subtracting it when converting from Kelvin to Celsius.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of the offset between the Kelvin and Celsius scales (TK=TC+273.15T_\text{K} = T_\text{C} + 273.15 versus TC=TK−273.15T_\text{C} = T_\text{K} - 273.15).

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Benchmark Check
  • Absolute zero is 0 K=−273.15∘C0\text{ K} = -273.15^\circ\text{C}, and the freezing point of water is 273.15 K=0∘C273.15\text{ K} = 0^\circ\text{C}.

  • Always check whether your Kelvin temperature is above or below 273.15 K273.15\text{ K}. Since 192.00 K<273.15 K192.00\text{ K} < 273.15\text{ K}, the resulting Celsius temperature must be negative.

Algebraic Isolation
  • Start from the fundamental definition TK=TC+273.15T_\text{K} = T_\text{C} + 273.15.

  • Subtract 273.15273.15 from both sides to solve for Celsius: TC=TK−273.15T_\text{C} = T_\text{K} - 273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the relationship: TC=TK−273.15T_\text{C} = T_\text{K} - 273.15.

  2. Substitute TK=192.00 KT_\text{K} = 192.00\text{ K}: TC=192.00−273.15T_\text{C} = 192.00 - 273.15.

  3. Compute the result: TC=−81.15∘CT_\text{C} = -81.15^\circ\text{C}.

Final answer

(a) 192.00 K192.00\text{ K}; (b) −81.15∘C-81.15^\circ\text{C}; (c) −114.07∘F-114.07^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the directional shift between absolute temperature scales (Kelvin, Rankine) and relative temperature scales (Celsius, Fahrenheit).

  • Perform a sanity check on intermediate values using known reference points like the freezing point of water (0∘C=273.15 K0^\circ\text{C} = 273.15\text{ K}).

  • Complete the practice exercises below to solidify conversions across all four temperature scales.

OverviewACEpath Teacher's Diagnosis

03 The student adds 459.67 to the Rankine temperature instead of subtracting it to solve for degrees Fahrenheit.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    TK=345.6/1.8  ⟹  TK=192.00 KT_\text{K} = 345.6 / 1.8 \implies T_\text{K} = 192.00\text{ K}

  2. Step 2

    TC=192.00−273.15  ⟹  TC=−81.15∘CT_\text{C} = 192.00 - 273.15 \implies T_\text{C} = -81.15^\circ\text{C}

  3. Step 3

    TF=345.6+459.67  ⟹  TF=805.27∘FT_\text{F} = 345.6 + 459.67 \implies T_\text{F} = 805.27^\circ\text{F}

    Correct

    TF=TR−459.67=345.6−459.67=−114.07∘FT_\text{F} = T_\text{R} - 459.67 = 345.6 - 459.67 = -114.07^\circ\text{F}

    The formula connecting the scales is TR=TF+459.67T_\text{R} = T_\text{F} + 459.67. To solve for TFT_\text{F}, you need to subtract 459.67459.67 from TRT_\text{R}, giving TF=345.6−459.67=−114.07∘FT_\text{F} = 345.6 - 459.67 = -114.07^\circ\text{F}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the scaling factor 1.8∘R/K1.8^\circ\text{R}/\text{K} to convert Rankine to kelvins.

You correctly subtracted 273.15273.15 to convert kelvins to degrees Celsius.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse operation error in temperature conversion

You added the offset 459.67459.67 rather than isolating TFT_\text{F} by subtracting 459.67459.67.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of zero-point offset conversion by memorizing the addition formula TR=TF+459.67T_\text{R} = T_\text{F} + 459.67 without isolating the target variable through inverse operations.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the unknown variable algebraically
  • If TR=TF+459.67T_\text{R} = T_\text{F} + 459.67, subtracting 459.67459.67 from both sides gives TF=TR−459.67T_\text{F} = T_\text{R} - 459.67.

  • Rearrange the conversion formula to make the desired variable the subject before substituting numerical values.

Perform a physical sense-check
  • Because the Rankine scale starts at absolute zero (0∘R=−459.67∘F0^\circ\text{R} = -459.67^\circ\text{F}), the numerical Rankine temperature must always be greater than the numerical Fahrenheit temperature for the same physical state.

  • Check whether TR>TFT_\text{R} > T_\text{F}. If your computed TFT_\text{F} is larger than TRT_\text{R}, the offset was applied in the wrong direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract 459.67459.67 from both sides of TR=TF+459.67T_\text{R} = T_\text{F} + 459.67 to isolate TFT_\text{F}: TF=TR−459.67T_\text{F} = T_\text{R} - 459.67.

  2. Substitute TR=345.6∘RT_\text{R} = 345.6^\circ\text{R}: TF=345.6−459.67T_\text{F} = 345.6 - 459.67.

  3. Compute the difference: TF=−114.07∘FT_\text{F} = -114.07^\circ\text{F}.

Final answer

(a) 192.00 K192.00\text{ K}; (b) −81.15∘C-81.15^\circ\text{C}; (c) −114.07∘F-114.07^\circ\text{F}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the conversion formula symbolically with the target variable isolated before plugging in numbers.

  • Verify that absolute temperature values (TKT_\text{K} and TRT_\text{R}) are always numerically larger than their relative counterparts (TCT_\text{C} and TFT_\text{F}) for any temperature.

Lock it in

Similar question

01

A sample of liquid nitrogen is maintained at 139.5∘R139.5^\circ\text{R}. Convert this temperature to kelvins (round to two decimal places).

Answer

TK=139.51.8=77.50 KT_\text{K} = \frac{139.5}{1.8} = 77.50\text{ K}.

02

An environmental chamber reads −40.00∘F-40.00^\circ\text{F}. Determine its temperature in: (a) Rankine (∘R^\circ\text{R}), and (b) kelvins (K\text{K}).

Answer

(a) TR=−40.00+459.67=419.67∘RT_\text{R} = -40.00 + 459.67 = 419.67^\circ\text{R}.\n(b) TK=419.671.8=233.15 KT_\text{K} = \frac{419.67}{1.8} = 233.15\text{ K}.

03

A gas expands from T1=200.00 KT_1 = 200.00\text{ K} to a final state with an increase of ΔT=90.00∘R\Delta T = 90.00^\circ\text{R}. Find the final temperature in degrees Celsius (∘C^\circ\text{C}).

Answer

The temperature increase in kelvins is ΔTK=90.001.8=50.00 K\Delta T_\text{K} = \frac{90.00}{1.8} = 50.00\text{ K}.\nThe final temperature in kelvins is T2=200.00+50.00=250.00 KT_2 = 200.00 + 50.00 = 250.00\text{ K}.\nConverting to Celsius: TC,2=250.00−273.15=−23.15∘CT_{\text{C}, 2} = 250.00 - 273.15 = -23.15^\circ\text{C}.

Loading workspace…