Resources

A crate of mass mm is pushed up a rough incline of angle θ\theta (0<θ<90∘0 < \theta < 90^\circ) by a distance LL at constant speed vv, and then identical work is considered when lowering the crate back down the same distance LL at the same constant speed vv. Students often assume that because the displacements are opposite in direction, the total work done by the applied pushing force going down is simply the negative of the work done going up. A m=20.0 kgm = 20.0\text{ kg} crate is pushed along a ramp inclined at θ=25.0∘\theta = 25.0^\circ with μk=0.300\mu_k = 0.300 over L=5.00 mL = 5.00\text{ m}. Applying the Work-Energy Theorem (where ΔK=0\Delta K = 0), calculate the work done by the applied force parallel to the ramp during the ascent (Wapp, upW_{\text{app, up}}) versus during the descent (Wapp, downW_{\text{app, down}}) to evaluate this common misconception. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

Wapp, up=+681 JW_{\text{app, up}} = +681\text{ J}, Wapp, down=−148 JW_{\text{app, down}} = -148\text{ J}

Steps

01

Identify the Forces and Normal Force

The crate moves along an incline of angle θ=25.0∘\theta = 25.0^\circ. Choosing a coordinate system where the xx-axis is parallel to the incline and the yy-axis is perpendicular to it:

  • The perpendicular component of gravity balances the normal force NN: N=mgcos⁡θN = mg \cos\theta
  • The magnitude of the kinetic friction force is: fk=μkN=μkmgcos⁡θf_k = \mu_k N = \mu_k mg \cos\theta
  • The magnitude of the component of gravity acting parallel to the incline (directed down the ramp) is: Fg,∥=mgsin⁡θF_{g,\parallel} = mg \sin\theta

Substituting the given values: mg=(20.0 kg)(9.80 m/s2)=196 Nmg = (20.0\text{ kg})(9.80\text{ m/s}^2) = 196\text{ N} Fg,∥=(196 N)sin⁡(25.0∘)≈82.83 NF_{g,\parallel} = (196\text{ N})\sin(25.0^\circ) \approx 82.83\text{ N} fk=(0.300)(196 N)cos⁡(25.0∘)≈53.29 Nf_k = (0.300)(196\text{ N})\cos(25.0^\circ) \approx 53.29\text{ N}


02

Work Done During Ascent (Wapp, upW_{\text{app, up}})

When the crate moves up the ramp by distance L=5.00 mL = 5.00\text{ m}:

  • Displacement is directed up the incline (+x+x).
  • Gravity acts down the incline (opposing motion): Wg,up=−Fg,∥L=−(82.83 N)(5.00 m)=−414.15 JW_{g,\text{up}} = -F_{g,\parallel} L = -(82.83\text{ N})(5.00\text{ m}) = -414.15\text{ J}
  • Kinetic friction opposes motion, pointing down the incline: Wf,up=−fkL=−(53.29 N)(5.00 m)=−266.45 JW_{f,\text{up}} = -f_k L = -(53.29\text{ N})(5.00\text{ m}) = -266.45\text{ J}

Because the crate moves at constant speed, the change in kinetic energy is ΔK=0\Delta K = 0. By the Work-Energy Theorem: Wnet=Wapp, up+Wg,up+Wf,up=ΔK=0W_{\text{net}} = W_{\text{app, up}} + W_{g,\text{up}} + W_{f,\text{up}} = \Delta K = 0 Wapp, up=−(Wg,up+Wf,up)W_{\text{app, up}} = - (W_{g,\text{up}} + W_{f,\text{up}}) Wapp, up=−(−414.15 J−266.45 J)=+680.60 J≈+681 JW_{\text{app, up}} = -(-414.15\text{ J} - 266.45\text{ J}) = +680.60\text{ J} \approx +681\text{ J}


03

Work Done During Descent (Wapp, downW_{\text{app, down}})

When the crate is lowered down the ramp by distance L=5.00 mL = 5.00\text{ m}:

  • Displacement is directed down the incline (+x+x in the direction of motion).
  • Gravity acts in the direction of motion: Wg,down=+Fg,∥L=+(82.83 N)(5.00 m)=+414.15 JW_{g,\text{down}} = +F_{g,\parallel} L = +(82.83\text{ N})(5.00\text{ m}) = +414.15\text{ J}
  • Kinetic friction still opposes motion, now pointing up the incline: Wf,down=−fkL=−(53.29 N)(5.00 m)=−266.45 JW_{f,\text{down}} = -f_k L = -(53.29\text{ N})(5.00\text{ m}) = -266.45\text{ J}

Applying the Work-Energy Theorem (ΔK=0\Delta K = 0): Wnet=Wapp, down+Wg,down+Wf,down=0W_{\text{net}} = W_{\text{app, down}} + W_{g,\text{down}} + W_{f,\text{down}} = 0 Wapp, down=−(Wg,down+Wf,down)W_{\text{app, down}} = -(W_{g,\text{down}} + W_{f,\text{down}}) Wapp, down=−(+414.15 J−266.45 J)=−147.70 J≈−148 JW_{\text{app, down}} = -(+414.15\text{ J} - 266.45\text{ J}) = -147.70\text{ J} \approx -148\text{ J}


04

Evaluating the Misconception

Students often assume that reversing the path simply negates the work done by the applied force (Wapp, down=−Wapp, upW_{\text{app, down}} = -W_{\text{app, up}}).

However, kinetic friction is non-conservative: it always opposes the direction of instantaneous velocity, doing negative work during both the ascent and the descent (Wf<0W_{f} < 0 in both cases). On the way up, the applied force must overcome both gravity and friction, whereas on the way down, friction partially assists the applied force in restraining the crate. Consequently: ∣Wapp, down∣≠∣Wapp, up∣|W_{\text{app, down}}| \neq |W_{\text{app, up}}|

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes that the work done by the applied force going down is simply the negative of the work done going up because displacement is reversed, ignoring the irreversible nature of friction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N=m⋅g⋅cos⁡(25.0∘)=20.0⋅9.80⋅cos⁡(25.0∘)=177.6 N  ⟹  fk=μk⋅N=0.300⋅177.6=53.3 NN = m \cdot g \cdot \cos(25.0^\circ) = 20.0 \cdot 9.80 \cdot \cos(25.0^\circ) = 177.6\text{ N} \implies f_k = \mu_k \cdot N = 0.300 \cdot 177.6 = 53.3\text{ N}

  2. Step 2

    Fapp, up=m⋅g⋅sin⁡(25.0∘)+fk=82.8+53.3=136.1 N  ⟹  Wapp, up=Fapp, up⋅L=136.1⋅5.00=681 JF_{\text{app, up}} = m \cdot g \cdot \sin(25.0^\circ) + f_k = 82.8 + 53.3 = 136.1\text{ N} \implies W_{\text{app, up}} = F_{\text{app, up}} \cdot L = 136.1 \cdot 5.00 = 681\text{ J}

  3. Step 3

    Wapp, down=−Wapp, up  ⟹  Wapp, down=−681 JW_{\text{app, down}} = -W_{\text{app, up}} \implies W_{\text{app, down}} = -681\text{ J}

    Correct

    Wnet=Wapp, down+Wg,down+Wf,down=0  ⟹  Wapp, down=−(mgsin⁡θ−fk)L≈−148 JW_{\text{net}} = W_{\text{app, down}} + W_{g,\text{down}} + W_{f,\text{down}} = 0 \implies W_{\text{app, down}} = -(mg\sin\theta - f_k)L \approx -148\text{ J}

    Reversing displacement does not simply reverse total work when friction is involved. Kinetic friction is non-conservative and opposes motion in both directions, so it points up the ramp during the descent.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the gravitational force perpendicular and parallel to the incline.

You calculated the magnitude of the kinetic friction force with high precision.

You set up the force balance during the ascent correctly to obtain Wapp, up=+681 JW_{\text{app, up}} = +681\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversibility assumption with friction

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the entire mechanical system as conservative or symmetric under time-reversal, forgetting that kinetic friction always opposes velocity and does negative work in both directions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Kinetic Friction
  • Kinetic friction always opposes the instantaneous direction of motion (fkf_k points opposite to v⃗\vec{v}).

  • Draw a fresh free-body diagram for the descent: when the crate slides down, friction points up the incline.

Work-Energy Theorem with Friction
  • For constant speed, ΔK=0  ⟹  Wnet=Wapp+Wg+Wf=0\Delta K = 0 \implies W_{\text{net}} = W_{\text{app}} + W_g + W_f = 0, where Wf=−fkL<0W_f = -f_k L < 0 both up and down.

  • Calculate the work of each force individually for descent instead of negating the ascent result.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify force directions during descent: displacement is down the ramp (+x+x), gravity component Fg,∥=mgsin⁡(25.0∘)=82.83 NF_{g,\parallel} = mg\sin(25.0^\circ) = 82.83\text{ N} acts down the ramp (+x+x), and friction fk=53.29 Nf_k = 53.29\text{ N} acts up the ramp (−x-x).

  2. Compute the work of gravity and friction over L=5.00 mL = 5.00\text{ m}: Wg,down=+(82.83 N)(5.00 m)=+414.15 JW_{g,\text{down}} = +(82.83\text{ N})(5.00\text{ m}) = +414.15\text{ J} and Wf,down=−(53.29 N)(5.00 m)=−266.45 JW_{f,\text{down}} = -(53.29\text{ N})(5.00\text{ m}) = -266.45\text{ J}.

  3. Apply the Work-Energy Theorem for constant speed (DeltaK=0\\Delta K = 0): Wapp, down+Wg,down+Wf,down=0W_{\text{app, down}} + W_{g,\text{down}} + W_{f,\text{down}} = 0.

  4. Solve for Wapp, downW_{\text{app, down}}: Wapp, down=−(+414.15 J−266.45 J)=−147.7 J≈−148 JW_{\text{app, down}} = -(+414.15\text{ J} - 266.45\text{ J}) = -147.7\text{ J} \approx -148\text{ J}.

Final answer

Wapp, up=+681 JW_{\text{app, up}} = +681\text{ J}, Wapp, down=−148 JW_{\text{app, down}} = -148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a separate free-body diagram for each direction of motion whenever friction is present.

  • Calculate the work done by conservative forces (gravity) and non-conservative forces (friction) independently before solving for the applied work.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the sign of the normal force component by using sine instead of cosine for the normal force, leading to an incorrect friction force and incorrect work values.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    N=m⋅g⋅sin⁡(25.0∘)=196.0⋅0.4226=82.8 NN = m \cdot g \cdot \sin(25.0^\circ) = 196.0 \cdot 0.4226 = 82.8\text{ N}

    Correct

    N=mgcos⁡(25.0∘)=(196.0 N)(0.9063)≈177.6 NN = mg\cos(25.0^\circ) = (196.0\text{ N})(0.9063) \approx 177.6\text{ N}

    You used sin⁡(25.0∘)\sin(25.0^\circ) rather than cos⁡(25.0∘)\cos(25.0^\circ) for the normal force. On an incline with angle θ\theta relative to horizontal, the perpendicular component of gravity balanced by the ramp surface is mgcos⁡θmg\cos\theta.

  2. Step 2

    fk=μk⋅N=0.300⋅82.8=24.8 Nf_k = \mu_k \cdot N = 0.300 \cdot 82.8 = 24.8\text{ N}

    Correct

    fk=μkN=0.300(177.6 N)≈53.3 Nf_k = \mu_k N = 0.300(177.6\text{ N}) \approx 53.3\text{ N}

    Your friction formula is correct, but the value is affected by the incorrect normal force from Step 1.

  3. Step 3

    Fapp, up=m⋅g⋅sin⁡(25.0∘)+fk=82.8+24.8=107.6 N  ⟹  Wapp, up=107.6⋅5.00=538 JF_{\text{app, up}} = m \cdot g \cdot \sin(25.0^\circ) + f_k = 82.8 + 24.8 = 107.6\text{ N} \implies W_{\text{app, up}} = 107.6 \cdot 5.00 = 538\text{ J}

    Correct

    Fapp, up=mgsin⁡(25.0∘)+fk=82.8 N+53.3 N=136.1 N  ⟹  Wapp, up=(136.1 N)(5.00 m)≈+681 JF_{\text{app, up}} = mg\sin(25.0^\circ) + f_k = 82.8\text{ N} + 53.3\text{ N} = 136.1\text{ N} \implies W_{\text{app, up}} = (136.1\text{ N})(5.00\text{ m}) \approx +681\text{ J}

    Your force balance and work calculation for moving up the ramp are conceptually correct, but the numerical result is affected by the earlier friction error.

  4. Step 4

    Fapp, down=m⋅g⋅sin⁡(25.0∘)−fk=82.8−24.8=58.0 N (directed up the incline)  ⟹  Wapp, down=−Fapp, down⋅L=−58.0⋅5.00=−290 JF_{\text{app, down}} = m \cdot g \cdot \sin(25.0^\circ) - f_k = 82.8 - 24.8 = 58.0\text{ N}\text{ (directed up the incline)} \implies W_{\text{app, down}} = -F_{\text{app, down}} \cdot L = -58.0 \cdot 5.00 = -290\text{ J}

    Correct

    Fapp, down=mgsin⁡(25.0∘)−fk=82.8 N−53.3 N=29.5 N (up the incline)  ⟹  Wapp, down=−(29.5 N)(5.00 m)≈−148 JF_{\text{app, down}} = mg\sin(25.0^\circ) - f_k = 82.8\text{ N} - 53.3\text{ N} = 29.5\text{ N}\text{ (up the incline)} \implies W_{\text{app, down}} = -(29.5\text{ N})(5.00\text{ m}) \approx -148\text{ J}

    You correctly recognized that the applied force must hold the crate back (pointing up the ramp) during descent, producing negative work, but the final value carries over the friction error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the component of gravity acting parallel to the incline as mgsin⁡θmg\sin\theta.

You set up the correct force balances for constant velocity in both the ascent and descent phases.

You correctly recognized that the applied force during descent points opposite to displacement, doing negative work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Swap for Normal Force

You accidentally swapped the perpendicular and parallel trigonometric projections, assigning sin⁡θ\sin\theta to the normal force instead of cos⁡θ\cos\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the adjacent and opposite legs when decomposing weight relative to an inclined plane. The angle θ\theta is measured from the horizontal, making the component perpendicular to the ramp adjacent to the angle in the weight vector triangle (mgcos⁡θmg\cos\theta) and the component parallel to the ramp opposite (mgsin⁡θmg\sin\theta).

REASONING PATH
Your ACEpath teacher’s suggested approach
Limiting Angle Sanity Check
  • As the incline angle approaches flat ground (θ→0∘\theta \to 0^\circ), the normal force must equal the full weight (N→mgN \to mg) and the parallel sliding component must vanish.

  • Check whether cos⁡(0∘)=1\cos(0^\circ) = 1 matches N=mgN = mg. Because sin⁡(0∘)=0\sin(0^\circ) = 0, NN cannot contain sin⁡θ\sin\theta when θ\theta is measured from horizontal.

Perpendicular Equilibrium
  • Along the axis perpendicular to an incline, ∑F⊥=N−mgcos⁡θ=0\sum F_\perp = N - mg\cos\theta = 0.

  • Always write N=mgcos⁡θN = mg\cos\theta when no other perpendicular forces act on the object.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct normal force: N=mgcos⁡(25.0∘)=(20.0 kg)(9.80 m/s2)cos⁡(25.0∘)≈177.63 NN = mg\cos(25.0^\circ) = (20.0\text{ kg})(9.80\text{ m/s}^2)\cos(25.0^\circ) \approx 177.63\text{ N}.

  2. Compute the kinetic friction force: fk=μkN=0.300×177.63 N≈53.29 Nf_k = \mu_k N = 0.300 \times 177.63\text{ N} \approx 53.29\text{ N}.

  3. Find Wapp, upW_{\text{app, up}}: Fapp, up=mgsin⁡(25.0∘)+fk=82.83 N+53.29 N=136.12 NF_{\text{app, up}} = mg\sin(25.0^\circ) + f_k = 82.83\text{ N} + 53.29\text{ N} = 136.12\text{ N}, giving Wapp, up=(136.12 N)(5.00 m)≈+681 JW_{\text{app, up}} = (136.12\text{ N})(5.00\text{ m}) \approx +681\text{ J}.

  4. Find Wapp, downW_{\text{app, down}}: Fapp, down=mgsin⁡(25.0∘)−fk=82.83 N−53.29 N=29.54 NF_{\text{app, down}} = mg\sin(25.0^\circ) - f_k = 82.83\text{ N} - 53.29\text{ N} = 29.54\text{ N} directed up the ramp, giving Wapp, down=−(29.54 N)(5.00 m)≈−148 JW_{\text{app, down}} = -(29.54\text{ N})(5.00\text{ m}) \approx -148\text{ J}.

Final answer

Wapp, up=+681 J,Wapp, down=−148 JW_{\text{app, up}} = +681\text{ J},\quad W_{\text{app, down}} = -148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Before substituting numbers, sketch the right triangle formed by the gravity vector to confirm which component is adjacent (mgcos⁡θmg\cos\theta) and which is opposite (mgsin⁡θmg\sin\theta).

  • Use the θ→0∘\theta \to 0^\circ test every time you write down normal force on a ramp to verify you haven't swapped sine and cosine.

OverviewACEpath Teacher's Diagnosis

03 The student treats friction as acting down the incline during descent as well, failing to reverse the direction of friction when velocity reverses.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fk=μk⋅m⋅g⋅cos⁡(25.0∘)=53.3 Nf_k = \mu_k \cdot m \cdot g \cdot \cos(25.0^\circ) = 53.3\text{ N}

  2. Step 2

    Fapp, up=m⋅g⋅sin⁡(25.0∘)+fk=82.8+53.3=136.1 N  ⟹  Wapp, up=136.1⋅5.00=681 JF_{\text{app, up}} = m \cdot g \cdot \sin(25.0^\circ) + f_k = 82.8 + 53.3 = 136.1\text{ N} \implies W_{\text{app, up}} = 136.1 \cdot 5.00 = 681\text{ J}

  3. Step 3

    Fapp, down=m⋅g⋅sin⁡(25.0∘)+fk=82.8+53.3=136.1 NF_{\text{app, down}} = m \cdot g \cdot \sin(25.0^\circ) + f_k = 82.8 + 53.3 = 136.1\text{ N}

    Correct

    Fapp, down=mgsin⁡θ−fk=82.8 N−53.3 N=29.5 NF_{\text{app, down}} = mg\sin\theta - f_k = 82.8\text{ N} - 53.3\text{ N} = 29.5\text{ N} (directed up the incline)

    When the crate moves down the incline, kinetic friction reverses direction and points up the incline. Since the component of gravity down the incline (82.8 N82.8\text{ N}) exceeds friction (53.3 N53.3\text{ N}), the applied restraining force must point up the incline with magnitude mgsin⁡θ−fk=29.5 Nmg\sin\theta - f_k = 29.5\text{ N}.

  4. Step 4

    Wapp, down=−Fapp, down⋅L=−136.1⋅5.00=−681 JW_{\text{app, down}} = -F_{\text{app, down}} \cdot L = -136.1 \cdot 5.00 = -681\text{ J}

    Correct

    Wapp, down=−Fapp, downL=−(29.5 N)(5.00 m)=−148 JW_{\text{app, down}} = -F_{\text{app, down}} L = -(29.5\text{ N})(5.00\text{ m}) = -148\text{ J}

    Because of the incorrect force expression in the previous step, your calculated work during descent is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the normal force and the magnitude of kinetic friction along the incline.

You set up the correct force balance along the incline for the crate moving upward at constant speed.

You correctly computed the work done by the applied force during the ascent as +681 J+681\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Friction Direction During Reversal

You assumed the magnitude of the applied force is identical during ascent and descent, only differing by a negative sign in the final work.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Kinetic friction is a non-conservative force whose direction depends strictly on instantaneous relative motion: it always opposes the velocity vector. Reversing the direction of motion along the ramp flips the direction of kinetic friction from down the ramp to up the ramp, altering the force balance rather than simply negating the entire process.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Friction Direction Rule
  • Kinetic friction always opposes the direction of instantaneous velocity relative to the contact surface.

  • Draw a new free-body diagram whenever the direction of motion reverses, explicitly pointing f⃗k\vec{f}_k opposite to velocity.

Work-Energy Consistency Check
  • Wnet=Wapp+Wg+Wf=ΔK=0W_{\text{net}} = W_{\text{app}} + W_g + W_f = \Delta K = 0 for constant-speed motion.

  • Verify that friction does negative work in both directions: Wf,up=−fkL<0W_{f,\text{up}} = -f_k L < 0 and Wf,down=−fkL<0W_{f,\text{down}} = -f_k L < 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Draw the free-body diagram for descent: velocity is directed down the ramp, so kinetic friction f⃗k\vec{f}_k points up the ramp while gravity along the incline Fg,∥=mgsin⁡θF_{g,\parallel} = mg\sin\theta points down the ramp.

  2. Equate forces along the incline for constant velocity: ∑Fx=mgsin⁡θ−fk−Fapp, down=0  ⟹  Fapp, down=82.83 N−53.29 N=29.54 N\sum F_x = mg\sin\theta - f_k - F_{\text{app, down}} = 0 \implies F_{\text{app, down}} = 82.83\text{ N} - 53.29\text{ N} = 29.54\text{ N} (acting up the incline).

  3. Calculate work done by the applied force: because F⃗app, down\vec{F}_{\text{app, down}} points up the incline while displacement L⃗\vec{L} is down the incline, Wapp, down=−(29.54 N)(5.00 m)=−147.7 JW_{\text{app, down}} = -(29.54\text{ N})(5.00\text{ m}) = -147.7\text{ J}.

Final answer

Wapp, up=+681 JW_{\text{app, up}} = +681\text{ J}, Wapp, down=−148 JW_{\text{app, down}} = -148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch separate free-body diagrams for the upward and downward motions of an object on an incline to visually verify the direction of friction.

  • Re-evaluate multi-stage work problems using the Work-Energy Theorem by summing scalar work contributions rather than assuming symmetry across opposite displacements.

Lock it in

Similar question

01

A 10.0 kg10.0\text{ kg} box is pushed up a 30.0∘30.0^\circ frictionless ramp at constant speed by a distance of 4.00 m4.00\text{ m}, then lowered back down the same distance at constant speed. Calculate Wapp, upW_{\text{app, up}} and Wapp, downW_{\text{app, down}}. (Take g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

Wapp, up=+196 JW_{\text{app, up}} = +196\text{ J}, Wapp, down=−196 JW_{\text{app, down}} = -196\text{ J}. Key steps: Without friction, only gravity does work (Fg,∥=mgsin⁡30∘=49.0 NF_{g,\parallel} = mg\sin 30^\circ = 49.0\text{ N}). Ascent: Wapp=+(49.0 N)(4.00 m)=+196 JW_{\text{app}} = +(49.0\text{ N})(4.00\text{ m}) = +196\text{ J}. Descent: Wapp=−(49.0 N)(4.00 m)=−196 JW_{\text{app}} = -(49.0\text{ N})(4.00\text{ m}) = -196\text{ J} because the system is purely conservative.

02

A 15.0 kg15.0\text{ kg} crate is lowered down a 20.0∘20.0^\circ incline at constant speed over 6.00 m6.00\text{ m}. The coefficient of kinetic friction is μk=0.250\mu_k = 0.250. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find the work done by the applied force parallel to the incline.

Answer

Wapp, down=−95.1 JW_{\text{app, down}} = -95.1\text{ J}. Key steps: Parallel gravity component is Fg,∥=(15.0)(9.80)sin⁡(20.0∘)≈50.28 NF_{g,\parallel} = (15.0)(9.80)\sin(20.0^\circ) \approx 50.28\text{ N} down the ramp. Normal force is N=(15.0)(9.80)cos⁡(20.0∘)≈138.13 NN = (15.0)(9.80)\cos(20.0^\circ) \approx 138.13\text{ N}, giving friction fk=(0.250)(138.13)≈34.43 Nf_k = (0.250)(138.13) \approx 34.43\text{ N} up the ramp. For ΔK=0\Delta K = 0, Fapp+Fg,∥−fk=0  ⟹  Fapp=−(50.28−34.43)=−15.85 NF_{\text{app}} + F_{g,\parallel} - f_k = 0 \implies F_{\text{app}} = -(50.28 - 34.43) = -15.85\text{ N} (applied up the ramp to hold it back). Work is Wapp, down=(−15.85 N)(6.00 m)≈−95.1 JW_{\text{app, down}} = (-15.85\text{ N})(6.00\text{ m}) \approx -95.1\text{ J}.

03

A 5.0 kg5.0\text{ kg} block is pushed up a ramp inclined at 37∘37^\circ (sin37∘≈0.60,cos⁡37∘≈0.80\\sin 37^\circ \approx 0.60, \cos 37^\circ \approx 0.80) with μk=0.80\mu_k = 0.80 over a distance of 3.0 m3.0\text{ m} at constant speed, then returned to the bottom at constant speed. Determine Wapp, upW_{\text{app, up}} and Wapp, downW_{\text{app, down}}. (Take g=10 m/s2g = 10\text{ m/s}^2). Does the applied force push up or down the ramp during descent?

Answer

Wapp, up=+182 JW_{\text{app, up}} = +182\text{ J}, Wapp, down=+14 JW_{\text{app, down}} = +14\text{ J} (applied force must push down the ramp during descent). Key steps: Fg,∥=(5.0)(10)(0.60)=30 NF_{g,\parallel} = (5.0)(10)(0.60) = 30\text{ N}; fk=(0.80)(5.0)(10)(0.80)=31.4 N≈30.7 Nf_k = (0.80)(5.0)(10)(0.80) = 31.4\text{ N} \approx 30.7\text{ N} (using exact cos⁡37∘≈0.7986\cos 37^\circ \approx 0.7986, fk=31.3 Nf_k = 31.3\text{ N}). Because fk>Fg,∥f_k > F_{g,\parallel} (31.3 N>30 N31.3\text{ N} > 30\text{ N}), gravity alone cannot overcome friction to slide the block down. Ascent: Fapp, up=30+31.3=61.3 N  ⟹  Wapp, up=(61.3)(3.0)=+184 JF_{\text{app, up}} = 30 + 31.3 = 61.3\text{ N} \implies W_{\text{app, up}} = (61.3)(3.0) = +184\text{ J} (or +182 J+182\text{ J} with exact angles). Descent: Fapp, down+30−31.3=0  ⟹  Fapp, down=+1.3 NF_{\text{app, down}} + 30 - 31.3 = 0 \implies F_{\text{app, down}} = +1.3\text{ N} down the ramp   ⟹  Wapp, down=(+1.3)(3.0)=+3.9 J≈+4 J\implies W_{\text{app, down}} = (+1.3)(3.0) = +3.9\text{ J} \approx +4\text{ J} (or +14 J+14\text{ J} using standard rounded trig values: Fapp=31.4−30=1.4 N  ⟹  +4.2 JF_{\text{app}} = 31.4 - 30 = 1.4\text{ N} \implies +4.2\text{ J}).

Loading workspace…