Resources

A coherent laser beam with a known wavelength of λ=632.8 nm\lambda = 632.8\text{ nm} passes through two long, parallel slits separated by d=0.220 mmd = 0.220\text{ mm}. Instead of recording the linear position on a screen, an optical detector mounted on a circular goniometer arm measures the angular deflection θ\theta from the central forward axis. Determine the angular separation Δθ\Delta\theta (in degrees) between the second-order bright fringe (m=2m = 2) and the fourth-order dark fringe (m=3m = 3, corresponding to path difference 3.5λ3.5\lambda) on the same side of the central maximum.

Answer and steps

Final answer

0.247∘0.247^\circ

Steps

1. Interference Conditions for a Double Slit

When light of wavelength λ\lambda passes through two slits separated by a distance dd, waves traveling at an angle θ\theta relative to the central forward axis interfere:

  • Bright fringes (constructive interference): Occur when the path difference between the two waves is an integer multiple of the wavelength: dsin⁡θm=mλ(m=0,1,2,… )d \sin\theta_m = m\lambda \quad (m = 0, 1, 2, \dots)
  • Dark fringes (destructive interference): Occur when the path difference is a half-integer multiple of the wavelength: dsin⁡θ=(n−12)λ(n=1,2,3,… )d \sin\theta = \left(n - \frac{1}{2}\right)\lambda \quad (n = 1, 2, 3, \dots) where nn is the fringe order count:

    • n=1n = 1 (1st dark fringe): Δr=0.5λ\Delta r = 0.5\lambda
    • n=2n = 2 (2nd dark fringe): Δr=1.5λ\Delta r = 1.5\lambda
    • n=3n = 3 (3rd dark fringe): Δr=2.5λ\Delta r = 2.5\lambda
    • n=4n = 4 (4th dark fringe): Δr=3.5λ\Delta r = 3.5\lambda

2. Determine the Angular Positions

Convert all quantities to standard SI units:

  • λ=632.8 nm=6.328×10−7 m\lambda = 632.8\text{ nm} = 6.328 \times 10^{-7}\text{ m}
  • d=0.220 mm=2.20×10−4 md = 0.220\text{ mm} = 2.20 \times 10^{-4}\text{ m}

Because λd≈2.876×10−3≪1\frac{\lambda}{d} \approx 2.876 \times 10^{-3} \ll 1, the angles are very small, meaning sin⁡θ≈θ\sin\theta \approx \theta (in radians).

Second-order bright fringe (m=2m = 2):

sin⁡θ2=2λd=2(6.328×10−7 m)2.20×10−4 m≈5.753×10−3\sin\theta_2 = \frac{2\lambda}{d} = \frac{2(6.328 \times 10^{-7}\text{ m})}{2.20 \times 10^{-4}\text{ m}} \approx 5.753 \times 10^{-3} θ2=arcsin⁡(5.753×10−3)≈5.753×10−3 rad\theta_2 = \arcsin(5.753 \times 10^{-3}) \approx 5.753 \times 10^{-3}\text{ rad}

Fourth-order dark fringe (path difference=3.5λ\text{path difference} = 3.5\lambda):

sin⁡θdark=3.5λd=3.5(6.328×10−7 m)2.20×10−4 m≈1.0067×10−2\sin\theta_{\text{dark}} = \frac{3.5\lambda}{d} = \frac{3.5(6.328 \times 10^{-7}\text{ m})}{2.20 \times 10^{-4}\text{ m}} \approx 1.0067 \times 10^{-2} θdark=arcsin⁡(1.0067×10−2)≈1.0067×10−2 rad\theta_{\text{dark}} = \arcsin(1.0067 \times 10^{-2}) \approx 1.0067 \times 10^{-2}\text{ rad}


3. Calculate the Angular Separation

Subtract the two angular positions: Δθ=θdark−θ2=(1.0067×10−2 rad)−(5.753×10−3 rad)=4.314×10−3 rad\Delta\theta = \theta_{\text{dark}} - \theta_2 = (1.0067 \times 10^{-2}\text{ rad}) - (5.753 \times 10^{-3}\text{ rad}) = 4.314 \times 10^{-3}\text{ rad}

Alternatively, using the small-angle approximation directly: Δθ≈(3.5−2)λd=1.5(6.328×10−7 m2.20×10−4 m)≈4.315×10−3 rad\Delta\theta \approx (3.5 - 2)\frac{\lambda}{d} = 1.5\left(\frac{6.328 \times 10^{-7}\text{ m}}{2.20 \times 10^{-4}\text{ m}}\right) \approx 4.315 \times 10^{-3}\text{ rad}

Convert from radians to degrees: Δθ=4.315×10−3 rad×180∘π≈0.247∘\Delta\theta = 4.315 \times 10^{-3}\text{ rad} \times \frac{180^\circ}{\pi} \approx 0.247^\circ

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the condition for the fourth-order dark fringe by using m = 4.5λ instead of the specified 3.5λ, resulting in an incorrect angular position and separation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡θ2=2(632.8×10−9)0.220×10−3=0.005753  ⟹  θ2=0.3296∘\sin\theta_2 = \frac{2(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.005753 \implies \theta_2 = 0.3296^\circ

  2. Step 2

    sin⁡θ4=4.5(632.8×10−9)0.220×10−3=0.012944  ⟹  θ4=0.7416∘\sin\theta_4 = \frac{4.5(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.012944 \implies \theta_4 = 0.7416^\circ

    Correct

    sin⁡θdark=3.5(632.8×10−9 m)2.20×10−4 m≈0.010067  ⟹  θdark≈0.5768∘\sin\theta_{\text{dark}} = \frac{3.5(632.8 \times 10^{-9}\text{ m})}{2.20 \times 10^{-4}\text{ m}} \approx 0.010067 \implies \theta_{\text{dark}} \approx 0.5768^\circ

    For dark fringes, the path difference follows Δr=(n−12)λ\Delta r = \left(n - \frac{1}{2}\right)\lambda. The 1st dark fringe is 0.5λ0.5\lambda, the 2nd is 1.5λ1.5\lambda, the 3rd is 2.5λ2.5\lambda, and the 4th is 3.5λ3.5\lambda. You used 4.5λ4.5\lambda (which corresponds to the 5th dark fringe).

  3. Step 3

    Δθ=0.7416∘−0.3296∘=0.412∘\Delta\theta = 0.7416^\circ - 0.3296^\circ = 0.412^\circ

    Correct

    Δθ=0.5768∘−0.3296∘=0.247∘\Delta\theta = 0.5768^\circ - 0.3296^\circ = 0.247^\circ

    Your subtraction step is logically correct, but the numerical result is affected by the incorrect value of θ4\theta_4 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the constructive interference formula dsin⁡θ=mλd\sin\theta = m\lambda for the second-order bright fringe.

You converted all lengths properly into standard SI units.

You accurately converted the resulting angle from radians to degrees.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fringe Order Misidentification

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the '4th-order dark fringe' with an extra half-wavelength added to 4 (4.5λ4.5\lambda) instead of recognizing that dark fringe half-integers start at 0.5λ0.5\lambda for n=1n=1, making the 4th dark fringe correspond to (4−0.5)λ=3.5λ(4 - 0.5)\lambda = 3.5\lambda.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dark Fringe Path Difference Rule
  • The nn-th dark fringe occurs at path difference Δr=(n−12)λ\Delta r = \left(n - \frac{1}{2}\right)\lambda for n=1,2,3,…n = 1, 2, 3, \dots (or (m+12)λ\left(m + \frac{1}{2}\right)\lambda with m=0,1,2,…m = 0, 1, 2, \dots).

  • Always list the first few dark fringe path differences (0.5λ,1.5λ,2.5λ,3.5λ0.5\lambda, 1.5\lambda, 2.5\lambda, 3.5\lambda) to verify the multiplier for the requested fringe.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use path difference Δr=3.5λ\Delta r = 3.5\lambda for the 4th dark fringe: sin⁡θdark=3.5(632.8×10−9 m)0.220×10−3 m=0.010067\sin\theta_{\text{dark}} = \frac{3.5(632.8 \times 10^{-9}\text{ m})}{0.220 \times 10^{-3}\text{ m}} = 0.010067

  2. Find the angle in degrees: θdark=arcsin⁡(0.010067)≈0.010067 rad×180∘π≈0.5768∘\theta_{\text{dark}} = \arcsin(0.010067) \approx 0.010067\text{ rad} \times \frac{180^\circ}{\pi} \approx 0.5768^\circ

  3. Calculate the angular separation: Δθ=0.5768∘−0.3296∘=0.2472∘≈0.247∘\Delta\theta = 0.5768^\circ - 0.3296^\circ = 0.2472^\circ \approx 0.247^\circ

Final answer

0.247∘0.247^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how destructive interference fringes are indexed, counting starting from n=1n=1 corresponding to Δr=0.5λ\Delta r = 0.5\lambda.

  • Solve interference problems by finding Δm=mdark−mbright=3.5−2=1.5\Delta m = m_{\text{dark}} - m_{\text{bright}} = 3.5 - 2 = 1.5 directly, using Δθ≈Δmλd\Delta\theta \approx \Delta m \frac{\lambda}{d}.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the angular positions in radians correctly using the small-angle approximation but forgets to convert the final angular separation into degrees.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    θ2=2λd=2(632.8×10−9)0.220×10−3=0.005753 rad\theta_2 = \frac{2\lambda}{d} = \frac{2(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.005753\text{ rad}

  2. Step 2

    θ4=3.5λd=3.5(632.8×10−9)0.220×10−3=0.010067 rad\theta_4 = \frac{3.5\lambda}{d} = \frac{3.5(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.010067\text{ rad}

  3. Step 3

    Δθ=0.010067−0.005753=0.00431 rad\Delta\theta = 0.010067 - 0.005753 = 0.00431\text{ rad}

  4. Step 4

    Δθ=0.00431\Delta\theta = 0.00431

    Correct

    Δθ=4.314×10−3 rad×180∘π≈0.247∘\Delta\theta = 4.314 \times 10^{-3}\text{ rad} \times \frac{180^\circ}{\pi} \approx 0.247^\circ

    The problem asks for the angular separation in degrees, but you stated the final answer in radians without multiplying by 180∘π\frac{180^\circ}{\pi}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the double-slit interference relations with the small-angle approximation.

You accurately substituted the wavelength and slit spacing in consistent SI units.

You calculated the angular separation in radians with high numerical precision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing unit conversion

You left the final angular value in radians instead of converting it to degrees.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

The formula θ≈mλd\theta \approx \frac{m\lambda}{d} naturally yields angles in radians. When the prompt specifies degrees, a concluding dimensional conversion factor of 180∘π\frac{180^\circ}{\pi} must be applied.

REASONING PATH
Your ACEpath teacher’s suggested approach
Natural Output of Small-Angle Approximations
  • Equations derived from sin⁡θ≈θ\sin\theta \approx \theta or arc length formulas produce angles strictly in radians, not degrees.

  • Always append unit tags (such as rad\text{rad}) to intermediate values so the required unit in the prompt is not overlooked.

Radian-to-Degree Conversion Factor
  • θ (∘)=θ (rad)×180∘π\theta\,(^\circ) = \theta\,(\text{rad}) \times \frac{180^\circ}{\pi}.

  • Multiply the final radian result by 180π≈57.2958\frac{180}{\pi} \approx 57.2958 whenever the problem explicitly requests degrees.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the angular difference in radians: Δθ=0.004314 rad\Delta\theta = 0.004314\text{ rad}.

  2. Convert radians to degrees using the conversion factor 180∘π\frac{180^\circ}{\pi}: Δθ=0.004314 rad×180∘π≈0.247∘\Delta\theta = 0.004314\text{ rad} \times \frac{180^\circ}{\pi} \approx 0.247^\circ.

Final answer

0.247∘0.247^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the target units requested in the problem statement before writing down your final answer.

  • Practice converting small radian angles to degrees using the factor 180∘π\frac{180^\circ}{\pi}.

OverviewACEpath Teacher's Diagnosis

03 The student treats the fourth dark fringe as an integer order m = 4 with path difference 4λ, confusing the condition for dark fringes with bright fringes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    θ2=2λd=2(632.8×10−9)0.220×10−3=0.005753 rad=0.3296∘\theta_2 = \frac{2\lambda}{d} = \frac{2(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.005753\text{ rad} = 0.3296^\circ

  2. Step 2

    θ4=4λd=4(632.8×10−9)0.220×10−3=0.011505 rad=0.6592∘\theta_4 = \frac{4\lambda}{d} = \frac{4(632.8 \times 10^{-9})}{0.220 \times 10^{-3}} = 0.011505\text{ rad} = 0.6592^\circ

    Correct

    θdark,4≈3.5λd=3.5(6.328×10−7 m)2.20×10−4 m≈1.0067×10−2 rad≈0.5768∘\theta_{\text{dark}, 4} \approx \frac{3.5\lambda}{d} = \frac{3.5(6.328 \times 10^{-7}\text{ m})}{2.20 \times 10^{-4}\text{ m}} \approx 1.0067 \times 10^{-2}\text{ rad} \approx 0.5768^\circ

    Dark fringes correspond to destructive interference with half-integer path differences, dsin⁡θ=(n−12)λd\sin\theta = (n - \frac{1}{2})\lambda. For the fourth dark fringe, the path difference is 3.5λ3.5\lambda, not 4λ4\lambda.

  3. Step 3

    Δθ=0.6592∘−0.3296∘=0.330∘\Delta\theta = 0.6592^\circ - 0.3296^\circ = 0.330^\circ

    Correct

    Δθ=0.5768∘−0.3296∘=0.247∘\Delta\theta = 0.5768^\circ - 0.3296^\circ = 0.247^\circ

    Your subtraction method was correct, but the result was affected by the incorrect angle used for the dark fringe.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the constructive interference formula for the bright fringe.

You handled the unit conversions from nanometers and millimeters to meters accurately.

You converted your angular values from radians to degrees properly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Interference Condition Confusion

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the integer multiple mλ=4λm\lambda = 4\lambda (constructive interference) instead of the half-integer multiple (n−12)λ=3.5λ(n - \frac{1}{2})\lambda = 3.5\lambda (destructive interference) to locate the dark fringe.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fringe Interference Conditions
  • Bright fringes occur when the path difference Δr=mλ\Delta r = m\lambda (m=0,1,2,…m = 0, 1, 2, \dots), while dark fringes occur when Δr=(n−12)λ\Delta r = (n - \frac{1}{2})\lambda (n=1,2,3,…n = 1, 2, 3, \dots).

  • Before computing, write down whether the target is a minimum (dark) or maximum (bright) and verify if the factor is an integer or half-integer.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the destructive interference condition for the 4th dark fringe: dsin⁡θ=3.5λd\sin\theta = 3.5\lambda.

  2. Calculate θdark≈3.5λd=3.5(6.328×10−7 m)2.20×10−4 m≈0.010067 rad≈0.5768∘\theta_{\text{dark}} \approx \frac{3.5\lambda}{d} = \frac{3.5(6.328 \times 10^{-7}\text{ m})}{2.20 \times 10^{-4}\text{ m}} \approx 0.010067\text{ rad} \approx 0.5768^\circ.

  3. Find the separation: Δθ=0.5768∘−0.3296∘=0.247∘\Delta\theta = 0.5768^\circ - 0.3296^\circ = 0.247^\circ.

Final answer

0.247∘0.247^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice matching the fringe description (bright vs. dark) to its exact path-difference formula before substituting numbers.

  • Solve problems where you calculate separations between mixed fringe types (a bright fringe and a dark fringe).

Lock it in

Similar question

01

Light of wavelength λ=500 nm\lambda = 500\text{ nm} is incident on two slits separated by d=0.25 mmd = 0.25\text{ mm}. Find the angular position (in radians) of the third-order dark fringe (n=3n = 3).

Answer

θ≈5.0×10−3 rad\theta \approx 5.0 \times 10^{-3}\text{ rad}. The 3rd dark fringe corresponds to a path difference of Δr=(3−12)λ=2.5λ\Delta r = \left(3 - \frac{1}{2}\right)\lambda = 2.5\lambda. Thus, θ≈sin⁡θ=2.5λd=2.5(500×10−9 m)2.5×10−4 m=5.0×10−3 rad\theta \approx \sin\theta = \frac{2.5\lambda}{d} = \frac{2.5(500 \times 10^{-9}\text{ m})}{2.5 \times 10^{-4}\text{ m}} = 5.0 \times 10^{-3}\text{ rad}.

02

In a Young's double-slit experiment, what is the angular separation Δθ\Delta\theta between the 1st bright fringe (m=1m = 1) and the 3rd dark fringe on the same side, if λ=600 nm\lambda = 600\text{ nm} and d=0.30 mmd = 0.30\text{ mm}?

Answer

Δθ=3.0×10−3 rad\Delta\theta = 3.0 \times 10^{-3}\text{ rad} (or ≈0.172∘\approx 0.172^\circ). The 1st bright fringe is at m=1m = 1, and the 3rd dark fringe is at mdark=2.5m_{\text{dark}} = 2.5. The difference in fringe order is Δm=2.5−1=1.5\Delta m = 2.5 - 1 = 1.5. Thus, Δθ≈1.5λd=1.5×600×10−9 m0.30×10−3 m=3.0×10−3 rad\Delta\theta \approx 1.5\frac{\lambda}{d} = 1.5 \times \frac{600 \times 10^{-9}\text{ m}}{0.30 \times 10^{-3}\text{ m}} = 3.0 \times 10^{-3}\text{ rad}.

03

Two slits separated by 0.150 mm0.150\text{ mm} are illuminated with monochromatic light. The angular separation between the central maximum (m=0m = 0) and the 4th dark fringe is measured to be 0.560∘0.560^\circ. What is the wavelength λ\lambda of the light?

Answer

λ=419 nm\lambda = 419\text{ nm}. The 4th dark fringe corresponds to Δr=3.5λ\Delta r = 3.5\lambda. Convert the angle to radians: θ=0.560∘×π180∘≈9.774×10−3 rad\theta = 0.560^\circ \times \frac{\pi}{180^\circ} \approx 9.774 \times 10^{-3}\text{ rad}. Using dsin⁡θ≈dθ=3.5λd\sin\theta \approx d\theta = 3.5\lambda, we obtain λ=dθ3.5=(1.50×10−4 m)(9.774×10−3)3.5≈4.19×10−7 m=419 nm\lambda = \frac{d\theta}{3.5} = \frac{(1.50 \times 10^{-4}\text{ m})(9.774 \times 10^{-3})}{3.5} \approx 4.19 \times 10^{-7}\text{ m} = 419\text{ nm}.

Loading workspace…