Resources

In a university physics laboratory, students use dual photogate timers to investigate the collision of two carts on a horizontal air track. Cart 11 has a total mass m1=(0.250±0.001) kgm_1 = (0.250 \pm 0.001)\text{ kg} and carries a 5.00 cm5.00\text{ cm} (0.0500 m0.0500\text{ m}) flag that passes through Photogate A before the collision, registering a transit time Δt1i=0.0250 s\Delta t_{1i} = 0.0250\text{ s}. Cart 22 has a mass m2=(0.500±0.001) kgm_2 = (0.500 \pm 0.001)\text{ kg} and is initially parked at rest between Photogate A and Photogate B. The carts undergo a central collision equipped with spring bumpers. Following the collision, Cart 11 rebounds backward through Photogate A with a transit time Δt1f=0.0750 s\Delta t_{1f} = 0.0750\text{ s}, while Cart 22 triggers Photogate B moving forward with a transit time Δt2f=0.0375 s\Delta t_{2f} = 0.0375\text{ s} using an identical 0.0500 m0.0500\text{ m} flag. (a) Determine the initial and final velocities of both carts, explicitly stating their directional signs (+x+x toward Photogate B). (b) Calculate the total kinetic energy of the system before impact (KiK_i) and after impact (KfK_f). (c) Based on the percentage difference Kf−KiKi×100%\frac{K_f - K_i}{K_i} \times 100\%, classify the collision as elastic, approximately elastic, or inelastic within typical experimental uncertainty.

Answer and steps

Final answer

(a) v1i=+2.00 m/sv_{1i} = +2.00\text{ m/s}, v2i=0 m/sv_{2i} = 0\text{ m/s}, v1f=−0.667 m/sv_{1f} = -0.667\text{ m/s}, v2f=+1.33 m/sv_{2f} = +1.33\text{ m/s}; (b) Ki=0.500 JK_i = 0.500\text{ J}, Kf=0.500 JK_f = 0.500\text{ J} (Kf=12(0.250)(−0.6667)2+12(0.500)(1.3333)2=0.0556 J+0.4444 J=0.500 JK_f = \frac{1}{2}(0.250)(-0.6667)^2 + \frac{1}{2}(0.500)(1.3333)^2 = 0.0556\text{ J} + 0.4444\text{ J} = 0.500\text{ J}); (c) ΔK/Ki=0.0%\Delta K / K_i = 0.0\%; the collision is classified as perfectly elastic within experimental precision.

Steps

Part (a): Determine the Initial and Final Velocities

The speed of a cart passing through a photogate is given by the length of the flag LL divided by the transit time Δt\Delta t: v=LΔtv = \frac{L}{\Delta t}

Defining the forward direction toward Photogate B as the positive xx-direction (+x+x):

  1. Initial Velocities (Before Collision):

    • Cart 1: Moves forward through Photogate A before impact: v1i=+0.0500 m0.0250 s=+2.00 m/sv_{1i} = +\frac{0.0500\text{ m}}{0.0250\text{ s}} = +2.00\text{ m/s}
    • Cart 2: Initially stationary at rest: v2i=0 m/sv_{2i} = 0\text{ m/s}
  2. Final Velocities (After Collision):

    • Cart 1: Rebounds backward (in the negative xx-direction) through Photogate A: v1f=−0.0500 m0.0750 s≈−0.667 m/s(−23 m/s)v_{1f} = -\frac{0.0500\text{ m}}{0.0750\text{ s}} \approx -0.667\text{ m/s} \quad \left(-\frac{2}{3}\text{ m/s}\right)
    • Cart 2: Moves forward through Photogate B: v2f=+0.0500 m0.0375 s≈+1.33 m/s(+43 m/s)v_{2f} = +\frac{0.0500\text{ m}}{0.0375\text{ s}} \approx +1.33\text{ m/s} \quad \left(+\frac{4}{3}\text{ m/s}\right)

Common Pitfall: Photogates only measure the time interval, and therefore scalar speed. Direction must be assigned manually based on physical observation: Cart 1 rebounds backward (negative sign), while Cart 2 continues forward (positive sign).


Part (b): Calculate Total Kinetic Energy Before and After Impact

The total kinetic energy is the sum of the kinetic energies of both carts, K=12m1v12+12m2v22K = \frac{1}{2}m_1 v_1^2 + \frac{1}{2}m_2 v_2^2.

  1. Initial Kinetic Energy (KiK_i): Ki=12m1v1i2+12m2v2i2K_i = \frac{1}{2}m_1 v_{1i}^2 + \frac{1}{2}m_2 v_{2i}^2 Ki=12(0.250 kg)(2.00 m/s)2+0=0.500 JK_i = \frac{1}{2}(0.250\text{ kg})(2.00\text{ m/s})^2 + 0 = 0.500\text{ J}
  2. Final Kinetic Energy (KfK_f): Kf=12m1v1f2+12m2v2f2K_f = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2 Kf=12(0.250 kg)(−23 m/s)2+12(0.500 kg)(43 m/s)2K_f = \frac{1}{2}(0.250\text{ kg})\left(-\frac{2}{3}\text{ m/s}\right)^2 + \frac{1}{2}(0.500\text{ kg})\left(\frac{4}{3}\text{ m/s}\right)^2 Kf=12(0.250)(49)+12(0.500)(169)=0.5009+4.009=4.509=0.500 JK_f = \frac{1}{2}(0.250)\left(\frac{4}{9}\right) + \frac{1}{2}(0.500)\left(\frac{16}{9}\right) = \frac{0.500}{9} + \frac{4.00}{9} = \frac{4.50}{9} = 0.500\text{ J} (Using rounded values: Kf=0.0556 J+0.4444 J=0.500 JK_f = 0.0556\text{ J} + 0.4444\text{ J} = 0.500\text{ J})

Part (c): Collision Classification

Calculate the relative percentage change in kinetic energy: Kf−KiKi×100%=0.500 J−0.500 J0.500 J×100%=0.0%\frac{K_f - K_i}{K_i} \times 100\% = \frac{0.500\text{ J} - 0.500\text{ J}}{0.500\text{ J}} \times 100\% = 0.0\%

Because total kinetic energy is completely conserved (ΔK=0\Delta K = 0), the collision is classified as elastic (perfectly elastic within experimental precision).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the rebound direction of Cart 1 and treats its final velocity as a positive scalar.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1i=0.05000.0250=+2.00 m/sv_{1i} = \frac{0.0500}{0.0250} = +2.00\text{ m/s}, v2i=0 m/sv_{2i} = 0\text{ m/s}

  2. Step 2

    v1f=0.05000.0750=+0.667 m/s  ⟹  v2f=0.05000.0375=+1.33 m/sv_{1f} = \frac{0.0500}{0.0750} = +0.667\text{ m/s} \implies v_{2f} = \frac{0.0500}{0.0375} = +1.33\text{ m/s}

    Correct

    v1f=−0.05000.0750≈−0.667 m/sv_{1f} = -\frac{0.0500}{0.0750} \approx -0.667\text{ m/s}, v2f=+0.05000.0375≈+1.33 m/sv_{2f} = +\frac{0.0500}{0.0375} \approx +1.33\text{ m/s}

    Because Cart 1 rebounds backward through Photogate A in the −x-x direction, its final velocity must be negative (v1f=−0.667 m/sv_{1f} = -0.667\text{ m/s}). Photogates record only elapsed time to yield scalar speed, so directional signs must be assigned manually based on physical motion.

  3. Step 3

    Ki=0.5⋅0.250⋅(2.00)2=0.500 J  ⟹  Kf=0.5⋅0.250⋅(0.667)2+0.5⋅0.500⋅(1.33)2=0.0556+0.444=0.500 JK_i = 0.5 \cdot 0.250 \cdot (2.00)^2 = 0.500\text{ J} \implies K_f = 0.5 \cdot 0.250 \cdot (0.667)^2 + 0.5 \cdot 0.500 \cdot (1.33)^2 = 0.0556 + 0.444 = 0.500\text{ J}

  4. Step 4

    Percent diff=0.500−0.5000.500⋅100%=0.0%  ⟹  The collision is elastic.\text{Percent diff} = \frac{0.500 - 0.500}{0.500} \cdot 100\% = 0.0\% \implies \text{The collision is elastic.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the flag length and photogate transit times to compute the speeds of both carts.

You calculated both the initial and final kinetic energies of the system with correct arithmetic and units.

You correctly interpreted the conservation of kinetic energy to classify the collision as elastic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing directional sign on rebound velocity

You treated the scalar speed obtained from the photogate as a positive velocity, forgetting that Cart 1 rebounded backward.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Photogate sensors measure only a scalar transit interval Δt\Delta t, meaning L/ΔtL / \Delta t gives only speed ∣v∣|v|. When a coordinate system is defined (+x+x toward Photogate B), any cart traveling in reverse must be explicitly assigned a negative velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Photogate Speed vs. 1D Velocity
  • Photogates measure elapsed time Δt\Delta t for a flag of length LL, giving scalar speed s=L/Δts = L / \Delta t. Velocity in 1D requires a sign: v=+sv = +s along +x+x, and v=−sv = -s along −x-x.

  • Always identify the direction of physical travel immediately after calculating L/ΔtL / \Delta t and prepend a negative sign if the cart rebounds or moves backward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Observe that Cart 1 rebounds backward through Photogate A, moving in the negative xx-direction.

  2. Calculate speed from photogate data: ∣v1f∣=0.0500 m0.0750 s=0.667 m/s|v_{1f}| = \frac{0.0500\text{ m}}{0.0750\text{ s}} = 0.667\text{ m/s}.

  3. Assign the directional sign according to the +x+x axis: v1f=−0.667 m/sv_{1f} = -0.667\text{ m/s}.

Final answer

(a) v1i=+2.00 m/sv_{1i} = +2.00\text{ m/s}, v2i=0 m/sv_{2i} = 0\text{ m/s}, v1f=−0.667 m/sv_{1f} = -0.667\text{ m/s}, v2f=+1.33 m/sv_{2f} = +1.33\text{ m/s}; (b) Ki=0.500 JK_i = 0.500\text{ J}, Kf=0.500 JK_f = 0.500\text{ J}; (c) percentage difference =0.0%= 0.0\%, collision is elastic.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before writing down cart velocities, sketch an arrow representing the cart's actual movement relative to the defined positive xx-axis.

  • Check conservation of momentum (pi=pfp_i = p_f) in addition to kinetic energy; momentum vectors will immediately reveal sign errors.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 1/2 in the kinetic energy formula, computing m*v² instead of (1/2)*m*v².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1i=0.0500/0.0250=+2.00 m/sv_{1i} = 0.0500 / 0.0250 = +2.00\text{ m/s} ⟹\Longrightarrow v2i=0 m/sv_{2i} = 0\text{ m/s} ⟹\Longrightarrow v1f=−0.0500/0.0750=−0.667 m/sv_{1f} = -0.0500 / 0.0750 = -0.667\text{ m/s} ⟹\Longrightarrow v2f=0.0500/0.0375=+1.33 m/sv_{2f} = 0.0500 / 0.0375 = +1.33\text{ m/s}

  2. Step 2

    Ki=m1⋅v1i2=0.250⋅(2.00)2=1.00 JK_i = m_1 \cdot v_{1i}^2 = 0.250 \cdot (2.00)^2 = 1.00\text{ J} ⟹\Longrightarrow Kf=m1⋅v1f2+m2⋅v2f2=0.250⋅(−0.667)2+0.500⋅(1.33)2=0.111+0.889=1.00 JK_f = m_1 \cdot v_{1f}^2 + m_2 \cdot v_{2f}^2 = 0.250 \cdot (-0.667)^2 + 0.500 \cdot (1.33)^2 = 0.111 + 0.889 = 1.00\text{ J}

    Correct

    Ki=12m1v1i2=12(0.250)(2.00)2=0.500 JK_i = \frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}(0.250)(2.00)^2 = 0.500\text{ J} ⟹\Longrightarrow Kf=12m1v1f2+12m2v2f2=12(0.250)(−0.667)2+12(0.500)(1.33)2=0.0556+0.444=0.500 JK_f = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2 = \frac{1}{2}(0.250)(-0.667)^2 + \frac{1}{2}(0.500)(1.33)^2 = 0.0556 + 0.444 = 0.500\text{ J}

    You used K=mv2K = mv^2 instead of the standard kinetic energy definition K=12mv2K = \frac{1}{2}mv^2, which doubled both KiK_i and KfK_f.

  3. Step 3

    Percent diff=(1.00−1.00)/1.00⋅100%=0.0%\text{Percent diff} = (1.00 - 1.00)/1.00 \cdot 100\% = 0.0\% ⟹\Longrightarrow "The collision is elastic."

    Correct

    Kf−KiKi×100%=0.500−0.5000.500×100%=0.0%\frac{K_f - K_i}{K_i} \times 100\% = \frac{0.500 - 0.500}{0.500} \times 100\% = 0.0\%; the collision is elastic.

    Because both KiK_i and KfK_f were scaled by the same factor of 22, the percentage difference evaluated to 0.0%0.0\% and your final classification was correct, but your intermediate energy numbers carried over the missing factor of 12\frac{1}{2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated all four cart velocities from photogate transit times.

You correctly assigned negative and positive signs to indicate cart rebound and forward motion.

You correctly added the individual kinetic energies of both carts to obtain the total final kinetic energy.

You correctly identified that zero percentage change in kinetic energy defines an elastic collision.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of 1/2 in Kinetic Energy Formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You defined kinetic energy as mv2mv^2 rather than K=12mv2K = \frac{1}{2}mv^2, omitting the factor of one-half derived from the work-energy theorem (W=∫mv dv=12mv2W = \int mv\,dv = \frac{1}{2}mv^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Definition
  • The translational kinetic energy of an object of mass mm and speed vv is K=12mv2K = \frac{1}{2}mv^2.

  • Always write down the formula with the 12\frac{1}{2} factor explicitly before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate initial kinetic energy: Ki=12m1v1i2=12(0.250 kg)(2.00 m/s)2=0.500 JK_i = \frac{1}{2}m_1 v_{1i}^2 = \frac{1}{2}(0.250\text{ kg})(2.00\text{ m/s})^2 = 0.500\text{ J}.

  2. Calculate final kinetic energy: Kf=12m1v1f2+12m2v2f2=12(0.250 kg)(−0.667 m/s)2+12(0.500 kg)(1.333 m/s)2=0.0556 J+0.4444 J=0.500 JK_f = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2 = \frac{1}{2}(0.250\text{ kg})(-0.667\text{ m/s})^2 + \frac{1}{2}(0.500\text{ kg})(1.333\text{ m/s})^2 = 0.0556\text{ J} + 0.4444\text{ J} = 0.500\text{ J}.

  3. Compute percentage change: Kf−KiKi×100%=0.500 J−0.500 J0.500 J×100%=0.0%\frac{K_f - K_i}{K_i} \times 100\% = \frac{0.500\text{ J} - 0.500\text{ J}}{0.500\text{ J}} \times 100\% = 0.0\%.

  4. Classify the collision: since ΔK=0\Delta K = 0, the collision is elastic.

Final answer

(a) v1i=+2.00 m/sv_{1i} = +2.00\text{ m/s}, v2i=0 m/sv_{2i} = 0\text{ m/s}, v1f=−0.667 m/sv_{1f} = -0.667\text{ m/s}, v2f=+1.33 m/sv_{2f} = +1.33\text{ m/s}; (b) Ki=0.500 JK_i = 0.500\text{ J}, Kf=0.500 JK_f = 0.500\text{ J}; (c) ΔK/Ki=0.0%\Delta K / K_i = 0.0\%; elastic.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the work-energy theorem to reinforce why the factor of 12\frac{1}{2} arises from integration.

  • Double-check energy calculations by verifying that KK has units of Joules (kg⋅m2/s2\text{kg}\cdot\text{m}^2/\text{s}^2) and comparing against momentum p=mvp = mv to avoid mixing algebraic forms.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to account for Cart 1 after the collision, calculating the final kinetic energy using only Cart 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v1i=0.0500/0.0250=+2.00 m/sv_{1i} = 0.0500 / 0.0250 = +2.00\text{ m/s} ⟹\Longrightarrow v2i=0 m/sv_{2i} = 0\text{ m/s} ⟹\Longrightarrow v1f=−0.0500/0.0750=−0.667 m/sv_{1f} = -0.0500 / 0.0750 = -0.667\text{ m/s} ⟹\Longrightarrow v2f=0.05000.0375=+1.33 m/sv_{2f} = \frac{0.0500}{0.0375} = +1.33\text{ m/s}

  2. Step 2

    Ki=0.5∗0.250∗(2.00)2=0.500 JK_i = 0.5 * 0.250 * (2.00)^2 = 0.500\text{ J}

  3. Step 3

    Kf=0.5∗m2∗v2f2=0.5∗0.500∗(1.33)2=0.444 JK_f = 0.5 * m_2 * v_{2f}^2 = 0.5 * 0.500 * (1.33)^2 = 0.444\text{ J}

    Correct

    Kf=12m1v1f2+12m2v2f2=12(0.250)(−0.667)2+12(0.500)(1.333)2=0.0556 J+0.4444 J=0.500 JK_f = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2 = \frac{1}{2}(0.250)(-0.667)^2 + \frac{1}{2}(0.500)(1.333)^2 = 0.0556\text{ J} + 0.4444\text{ J} = 0.500\text{ J}

    You omitted Cart 1 from the final kinetic energy. Cart 1 rebounds with speed 0.667 m/s0.667\text{ m/s} and still carries kinetic energy (0.0556 J0.0556\text{ J}), so the total system kinetic energy must sum the kinetic energies of both carts.

  4. Step 4

    Percent diff=0.444−0.5000.500∗100%=−11.2%\text{Percent diff} = \frac{0.444 - 0.500}{0.500} * 100\% = -11.2\% ⟹\Longrightarrow "The collision is inelastic."

    Correct

    Kf−KiKi×100%=0.0%\frac{K_f - K_i}{K_i} \times 100\% = 0.0\%; the collision is classified as elastic.

    Because your KfK_f value was missing Cart 1's energy, your percentage change was negative, leading you to classify the collision as inelastic instead of elastic.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated all four velocity magnitudes and assigned appropriate signs for direction.

You correctly computed the initial kinetic energy of the system as 0.500 J0.500\text{ J}.

You correctly set up the formula for percentage difference to test for elasticity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Rebounding Object's Kinetic Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the final state as if only Cart 2 was in motion, overlooking that Cart 1 rebounded with non-zero speed and contributes to the total kinetic energy of the system.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Definition for Kinetic Energy
  • The total kinetic energy of a multi-particle system at any instant is the scalar sum of the kinetic energies of all individual objects: K=∑12mivi2K = \sum \frac{1}{2}m_i v_i^2.

  • Always list every object in the system after the collision and verify whether its final speed is non-zero before concluding the calculation of KfK_f.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Add the kinetic energy of both carts after impact: Kf=12m1v1f2+12m2v2f2K_f = \frac{1}{2}m_1 v_{1f}^2 + \frac{1}{2}m_2 v_{2f}^2.

  2. Substitute the values: Kf=12(0.250 kg)(−0.667 m/s)2+12(0.500 kg)(1.333 m/s)2=0.0556 J+0.4444 J=0.500 JK_f = \frac{1}{2}(0.250\text{ kg})(-0.667\text{ m/s})^2 + \frac{1}{2}(0.500\text{ kg})(1.333\text{ m/s})^2 = 0.0556\text{ J} + 0.4444\text{ J} = 0.500\text{ J}.

  3. Calculate the percentage difference: Kf−KiKi×100%=0.500 J−0.500 J0.500 J×100%=0.0%\frac{K_f - K_i}{K_i} \times 100\% = \frac{0.500\text{ J} - 0.500\text{ J}}{0.500\text{ J}} \times 100\% = 0.0\%.

  4. Conclude that because kinetic energy is completely conserved, the collision is elastic.

Final answer

(b) Kf=0.500 JK_f = 0.500\text{ J}; (c) ΔK/Ki=0.0%\Delta K / K_i = 0.0\%, so the collision is elastic.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down an explicit two-term sum Kf=K1f+K2fK_f = K_{1f} + K_{2f} whenever dealing with a two-body collision.

  • Remember that kinetic energy is a scalar depending on v2v^2, so a rebounding cart with negative velocity always contributes positive kinetic energy.

Lock it in

Similar question

01

A 0.300 kg0.300\text{ kg} glider on an air track passes through a photogate with flag length 0.0600 m0.0600\text{ m} in 0.0400 s0.0400\text{ s} moving right (+x+x). After bouncing off a spring bumper at the end of the track, it passes back through the same photogate in 0.0500 s0.0500\text{ s}. State its initial and final velocities with explicit directional signs.

Answer

vi=+1.50 m/sv_i = +1.50\text{ m/s} and vf=−1.20 m/sv_f = -1.20\text{ m/s}. Speed before is 0.0600/0.0400=1.50 m/s0.0600 / 0.0400 = 1.50\text{ m/s} moving forward. Speed after is 0.0600/0.0500=1.20 m/s0.0600 / 0.0500 = 1.20\text{ m/s}, but rebounding backward makes vf=−1.20 m/sv_f = -1.20\text{ m/s}.

02

Two carts collide on a track where right is +x+x. Cart 1 (m1=0.20 kgm_1 = 0.20\text{ kg}) has initial velocity v1i=+1.0 m/sv_{1i} = +1.0\text{ m/s} and Cart 2 (m2=0.40 kgm_2 = 0.40\text{ kg}) is initially at rest. After impact, Cart 2 moves right at +0.67 m/s+0.67\text{ m/s} while Cart 1 rebounds left at 0.33 m/s0.33\text{ m/s}. Verify whether total linear momentum is conserved.

Answer

Yes, momentum is conserved. pi=m1v1i+m2v2i=(0.20)(+1.0)+0=+0.20 kg⋅m/sp_i = m_1 v_{1i} + m_2 v_{2i} = (0.20)(+1.0) + 0 = +0.20\text{ kg}\cdot\text{m/s}. With Cart 1 rebounding, v1f=−0.33 m/sv_{1f} = -0.33\text{ m/s}, so pf=(0.20)(−0.33)+(0.40)(+0.67)=−0.066+0.268=+0.20 kg⋅m/sp_f = (0.20)(-0.33) + (0.40)(+0.67) = -0.066 + 0.268 = +0.20\text{ kg}\cdot\text{m/s}.

03

A student measures cart speeds in an elastic collision but forgets to record rebound directions. Cart 1 (0.50 kg0.50\text{ kg}) has speed 2.0 m/s2.0\text{ m/s} before impact; Cart 2 (1.0 kg1.0\text{ kg}) is at rest. After impact, the measured speeds are 0.67 m/s0.67\text{ m/s} for Cart 1 and 1.33 m/s1.33\text{ m/s} for Cart 2. Use conservation of linear momentum along +x+x to mathematically deduce the correct sign of Cart 1's final velocity.

Answer

v1f=−0.67 m/sv_{1f} = -0.67\text{ m/s}. Initial momentum is pi=(0.50)(+2.0)=+1.0 kg⋅m/sp_i = (0.50)(+2.0) = +1.0\text{ kg}\cdot\text{m/s}. For Cart 2 moving forward, p2f=(1.0)(+1.33)=+1.33 kg⋅m/sp_{2f} = (1.0)(+1.33) = +1.33\text{ kg}\cdot\text{m/s}. By momentum conservation pi=m1v1f+p2f  ⟹  1.0=(0.50)v1f+1.33  ⟹  0.50v1f=−0.33  ⟹  v1f=−0.67 m/sp_i = m_1 v_{1f} + p_{2f} \implies 1.0 = (0.50)v_{1f} + 1.33 \implies 0.50 v_{1f} = -0.33 \implies v_{1f} = -0.67\text{ m/s}.

Loading workspace…