Resources

In a physics laboratory experiment, a force sensor attached to a dynamic cart of mass m=0.500 kgm = 0.500\text{ kg} measures the horizontal force Fx(x)F_x(x) applied as the cart is dragged along a straight horizontal air track from x=0.00 mx = 0.00\text{ m} to x=0.800 mx = 0.800\text{ m}. The force-versus-position profile recorded by the data-acquisition software consists of three distinct linear segments: (1) a linearly increasing ramp from Fx(0)=0.00 NF_x(0) = 0.00\text{ N} to Fx(0.200 m)=4.00 NF_x(0.200\text{ m}) = 4.00\text{ N}; (2) a constant plateau where Fx=4.00 NF_x = 4.00\text{ N} from x=0.200 mx = 0.200\text{ m} to x=0.500 mx = 0.500\text{ m}; and (3) a linearly decreasing ramp from Fx(0.500 m)=4.00 NF_x(0.500\text{ m}) = 4.00\text{ N} down to Fx(0.800 m)=1.00 NF_x(0.800\text{ m}) = 1.00\text{ N}. (a) Calculate the total work WW performed by the measured force over the entire interval from x=0.00 mx = 0.00\text{ m} to x=0.800 mx = 0.800\text{ m} by evaluating the area under the Fx−xF_x-x graph. (b) Assuming the cart was initially at rest at x=0x = 0 and track friction is negligible, calculate the cart's final speed vfv_f at x=0.800 mx = 0.800\text{ m}.

Answer and steps

Final answer

(a) W=2.35 JW = 2.35\text{ J}; (b) vf=3.07 m/sv_f = 3.07\text{ m/s}.

Steps

Part (a): Calculating Total Work Done from the Fx−xF_x-x Graph

The work WW done by a one-dimensional variable force is given by the definite integral of force with respect to position, which geometrically equals the area under the force-versus-position (Fx−xF_x-x) curve:

W=∫xixfFx(x) dxW = \int_{x_i}^{x_f} F_x(x)\,dx

The total area can be divided into three geometric shapes corresponding to the three segments:

  1. Segment 1 (x=0.00 mx = 0.00\text{ m} to x=0.200 mx = 0.200\text{ m}): Triangle

    • The force increases linearly from 0.00 N0.00\text{ N} to 4.00 N4.00\text{ N} over a displacement of Δx1=0.200 m−0.00 m=0.200 m\Delta x_1 = 0.200\text{ m} - 0.00\text{ m} = 0.200\text{ m}.
    • Using the area of a right triangle: W1=12⋅base⋅height=12⋅(0.200 m)⋅(4.00 N)=0.400 JW_1 = \frac{1}{2} \cdot \text{base} \cdot \text{height} = \frac{1}{2} \cdot (0.200\text{ m}) \cdot (4.00\text{ N}) = 0.400\text{ J}
  2. Segment 2 (x=0.200 mx = 0.200\text{ m} to x=0.500 mx = 0.500\text{ m}): Rectangle

    • The force remains constant at 4.00 N4.00\text{ N} over a displacement of Δx2=0.500 m−0.200 m=0.300 m\Delta x_2 = 0.500\text{ m} - 0.200\text{ m} = 0.300\text{ m}.
    • Using the area of a rectangle: W2=base⋅height=(0.300 m)⋅(4.00 N)=1.200 JW_2 = \text{base} \cdot \text{height} = (0.300\text{ m}) \cdot (4.00\text{ N}) = 1.200\text{ J}
  3. Segment 3 (x=0.500 mx = 0.500\text{ m} to x=0.800 mx = 0.800\text{ m}): Trapezoid

    • The force decreases linearly from 4.00 N4.00\text{ N} to 1.00 N1.00\text{ N} over a displacement of Δx3=0.800 m−0.500 m=0.300 m\Delta x_3 = 0.800\text{ m} - 0.500\text{ m} = 0.300\text{ m}.
    • Using the area of a trapezoid: W3=Finitial+Ffinal2⋅Δx3=4.00 N+1.00 N2⋅(0.300 m)=(2.50 N)⋅(0.300 m)=0.750 JW_3 = \frac{F_{\text{initial}} + F_{\text{final}}}{2} \cdot \Delta x_3 = \frac{4.00\text{ N} + 1.00\text{ N}}{2} \cdot (0.300\text{ m}) = (2.50\text{ N}) \cdot (0.300\text{ m}) = 0.750\text{ J}

Summing the work done in all three regions: W=W1+W2+W3=0.400 J+1.200 J+0.750 J=2.35 JW = W_1 + W_2 + W_3 = 0.400\text{ J} + 1.200\text{ J} + 0.750\text{ J} = 2.35\text{ J}


Part (b): Finding the Final Speed Using the Work-Energy Theorem

According to the work-energy theorem, the net work done on an object equals its change in kinetic energy:

Wnet=ΔK=Kf−Ki=12mvf2−12mvi2W_{\text{net}} = \Delta K = K_f - K_i = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2

Since the cart starts from rest (vi=0 m/sv_i = 0\text{ m/s}) and horizontal track friction is negligible, Wnet=W=2.35 JW_{\text{net}} = W = 2.35\text{ J}:

W=12mvf2W = \frac{1}{2} m v_f^2

Rearrange to solve for vfv_f:

vf=2Wmv_f = \sqrt{\frac{2W}{m}}

Substitute W=2.35 JW = 2.35\text{ J} and m=0.500 kgm = 0.500\text{ kg}:

vf=2⋅2.35 J0.500 kg=4.700.500=9.40≈3.07 m/sv_f = \sqrt{\frac{2 \cdot 2.35\text{ J}}{0.500\text{ kg}}} = \sqrt{\frac{4.70}{0.500}} = \sqrt{9.40} \approx 3.07\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the third segment as a triangle that drops to zero force instead of a trapezoid with a non-zero base of 1.00 N, underestimating the total work done.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W1=12⋅0.200⋅4.00=0.400 J  ⟹  W2=(0.500−0.200)⋅4.00=1.20 JW_1 = \frac{1}{2} \cdot 0.200 \cdot 4.00 = 0.400\text{ J} \implies W_2 = (0.500 - 0.200) \cdot 4.00 = 1.20\text{ J}

  2. Step 2

    W3=12⋅(0.800−0.500)⋅4.00=0.600 JW_3 = \frac{1}{2} \cdot (0.800 - 0.500) \cdot 4.00 = 0.600\text{ J}

    Correct

    W3=4.00 N+1.00 N2⋅(0.800 m−0.500 m)=0.750 JW_3 = \frac{4.00\text{ N} + 1.00\text{ N}}{2} \cdot (0.800\text{ m} - 0.500\text{ m}) = 0.750\text{ J}

    The force decreases to 1.00 N1.00\text{ N}, not 0 N0\text{ N}. The area under this linear segment is a trapezoid (or a rectangle of height 1.00 N1.00\text{ N} plus a triangle of height 3.00 N3.00\text{ N}), which gives 0.750 J0.750\text{ J} rather than 0.600 J0.600\text{ J}.

  3. Step 3

    W=0.400+1.20+0.600=2.20 JW = 0.400 + 1.20 + 0.600 = 2.20\text{ J}

    Correct

    W=0.400 J+1.200 J+0.750 J=2.35 JW = 0.400\text{ J} + 1.200\text{ J} + 0.750\text{ J} = 2.35\text{ J}

    Your sum is mathematically consistent with your segment values, but it inherits the error from W3W_3.

  4. Step 4

    W=12mvf2  ⟹  2.20=12⋅0.500⋅vf2  ⟹  vf2=8.80  ⟹  vf=8.80≈2.97 m/sW = \frac{1}{2} m v_f^2 \implies 2.20 = \frac{1}{2} \cdot 0.500 \cdot v_f^2 \implies v_f^2 = 8.80 \implies v_f = \sqrt{8.80} \approx 2.97\text{ m/s}

    Correct

    vf=2Wm=2(2.35 J)0.500 kg=9.40≈3.07 m/sv_f = \sqrt{\frac{2W}{m}} = \sqrt{\frac{2(2.35\text{ J})}{0.500\text{ kg}}} = \sqrt{9.40} \approx 3.07\text{ m/s}

    You applied the work-energy theorem and solved for vfv_f correctly, but using W=2.20 JW = 2.20\text{ J} instead of 2.35 J2.35\text{ J} led to 2.97 m/s2.97\text{ m/s} instead of 3.07 m/s3.07\text{ m/s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that work corresponds to the area under the force-versus-position graph.

You correctly computed the work done in the ramp-up and plateau regions.

You set up and rearranged the work-energy theorem correctly to solve for the final velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trapezoid area calculated as triangle

You used the triangle formula 12bh\frac{1}{2} b h for segment 3 as if the force dropped all the way to 0 N0\text{ N}, overlooking the non-zero final force of 1.00 N1.00\text{ N}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a linearly decreasing force profile with a complete drop to the x-axis causes you to compute a triangle area instead of evaluating the true trapezoidal area with two parallel non-zero bases.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the final value of the interval
  • For a linear ramp between F1F_1 and F2F_2, the area under the curve is a trapezoid: Area=F1+F22Δx\text{Area} = \frac{F_1 + F_2}{2} \Delta x.

  • Always read both the initial and final force values on the boundaries of an interval before choosing between a triangle and a trapezoid.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. W3=4.00 N+1.00 N2⋅(0.800 m−0.500 m)=2.50 N⋅0.300 m=0.750 JW_3 = \frac{4.00\text{ N} + 1.00\text{ N}}{2} \cdot (0.800\text{ m} - 0.500\text{ m}) = 2.50\text{ N} \cdot 0.300\text{ m} = 0.750\text{ J}

  2. W=W1+W2+W3=0.400 J+1.200 J+0.750 J=2.35 JW = W_1 + W_2 + W_3 = 0.400\text{ J} + 1.200\text{ J} + 0.750\text{ J} = 2.35\text{ J}

  3. vf=2Wm=2⋅2.35 J0.500 kg=9.40≈3.07 m/sv_f = \sqrt{\frac{2W}{m}} = \sqrt{\frac{2 \cdot 2.35\text{ J}}{0.500\text{ kg}}} = \sqrt{9.40} \approx 3.07\text{ m/s}

Final answer

(a) W=2.35 JW = 2.35\text{ J}; (b) vf=3.07 m/sv_f = 3.07\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch or inspect the baseline of each segment on a force-position graph to confirm whether the curve touches the xx-axis.

  • Split any trapezoid into a rectangle and a triangle as an alternative verification method whenever you are unsure about the trapezoid formula.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to take the square root of v_f² when solving for the final speed from the kinetic energy formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W1=12⋅0.200⋅4.00=0.400 J  ⟹  W2=0.300⋅4.00=1.20 J  ⟹  W3=12⋅(4.00+1.00)⋅0.300=0.750 J  ⟹  W=0.400+1.20+0.750=2.35 JW_1 = \frac{1}{2} \cdot 0.200 \cdot 4.00 = 0.400\text{ J} \implies W_2 = 0.300 \cdot 4.00 = 1.20\text{ J} \implies W_3 = \frac{1}{2} \cdot (4.00 + 1.00) \cdot 0.300 = 0.750\text{ J} \implies W = 0.400 + 1.20 + 0.750 = 2.35\text{ J}

  2. Step 2

    W=12⋅m⋅vf2  ⟹  2.35=12⋅0.500⋅vf2W = \frac{1}{2} \cdot m \cdot v_f^2 \implies 2.35 = \frac{1}{2} \cdot 0.500 \cdot v_f^2

  3. Step 3

    vf=2⋅2.350.500=9.40 m/sv_f = \frac{2 \cdot 2.35}{0.500} = 9.40\text{ m/s}

    Correct

    vf=2⋅2.350.500=9.40≈3.07 m/sv_f = \sqrt{\frac{2 \cdot 2.35}{0.500}} = \sqrt{9.40} \approx 3.07\text{ m/s}

    The expression 2⋅2.350.500=9.40\frac{2 \cdot 2.35}{0.500} = 9.40 equals vf2v_f^2, not vfv_f. You need to take the square root to solve for vfv_f.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the area under each piece of the Fx−xF_x-x graph to find total work.

You correctly identified that the net work equals the final kinetic energy 12mvf2\frac{1}{2}mv_f^2 for an object starting from rest.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of radical when solving quadratic variable

You dropped the square exponent on vfv_f and solved for vf2v_f^2 as if it were vfv_f.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When isolating a squared variable such as v2v^2 in kinetic energy formulas, the final step requires taking the square root: v=v2v = \sqrt{v^2}. Labeled intermediate values can easily be mistaken for the final linear variable if units or exponents are dropped during algebraic rearrangement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track the Exponent
  • K=12mv2  ⟹  v2=2Km  ⟹  v=2KmK = \frac{1}{2}mv^2 \implies v^2 = \frac{2K}{m} \implies v = \sqrt{\frac{2K}{m}}

  • Keep the exponent on v2v^2 on the left side until you explicitly write the radical sign on the right side.

Check Units and Magnitude
  • [v2]=m2/s2[v^2] = \text{m}^2/\text{s}^2, whereas [v]=m/s[v] = \text{m/s}.

  • Confirm that calculating 2Wm\frac{2W}{m} yields squared speed units, prompting the square root.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. vf2=2⋅2.350.500=9.40 m2/s2v_f^2 = \frac{2 \cdot 2.35}{0.500} = 9.40\text{ m}^2/\text{s}^2

  2. vf=9.40 m2/s2≈3.07 m/sv_f = \sqrt{9.40\text{ m}^2/\text{s}^2} \approx 3.07\text{ m/s}

Final answer

(a) W=2.35 JW = 2.35\text{ J}; (b) vf=3.07 m/sv_f = 3.07\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write vf2=9.40 m2/s2v_f^2 = 9.40\text{ m}^2/\text{s}^2 explicitly before taking the square root.

  • Solve for speed using v=2W/mv = \sqrt{2W/m} as a symbolic formula before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student uses the cumulative coordinate x = 0.500 m as the width of the second segment instead of the interval width Δx = 0.300 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    W1=12⋅0.200⋅4.00=0.400 JW_1 = \frac{1}{2} \cdot 0.200 \cdot 4.00 = 0.400\text{ J}

  2. Step 2

    W2=0.500⋅4.00=2.00 JW_2 = 0.500 \cdot 4.00 = 2.00\text{ J}

    Correct

    W2=(0.500 m−0.200 m)⋅4.00 N=0.300 m⋅4.00 N=1.20 JW_2 = (0.500\text{ m} - 0.200\text{ m}) \cdot 4.00\text{ N} = 0.300\text{ m} \cdot 4.00\text{ N} = 1.20\text{ J}

    You substituted the position coordinate x=0.500 mx = 0.500\text{ m} instead of the width of the segment, Δx2=0.500 m−0.200 m=0.300 m\Delta x_2 = 0.500\text{ m} - 0.200\text{ m} = 0.300\text{ m}.

  3. Step 3

    W3=12⋅(4.00+1.00)⋅0.300=0.750 JW_3 = \frac{1}{2} \cdot (4.00 + 1.00) \cdot 0.300 = 0.750\text{ J}

  4. Step 4

    W=0.400+2.00+0.750=3.15 JW = 0.400 + 2.00 + 0.750 = 3.15\text{ J}

    Correct

    W=0.400 J+1.200 J+0.750 J=2.35 JW = 0.400\text{ J} + 1.200\text{ J} + 0.750\text{ J} = 2.35\text{ J}

    Your summation method is correct, but the total is affected by the incorrect value of W2W_2.

  5. Step 5

    W=12mvf2  ⟹  3.15=12⋅0.500⋅vf2  ⟹  vf2=12.6  ⟹  vf=12.6≈3.55 m/sW = \frac{1}{2} m v_f^2 \implies 3.15 = \frac{1}{2} \cdot 0.500 \cdot v_f^2 \implies v_f^2 = 12.6 \implies v_f = \sqrt{12.6} \approx 3.55\text{ m/s}

    Correct

    vf=2Wm=2(2.35 J)0.500 kg=9.40≈3.07 m/sv_f = \sqrt{\frac{2W}{m}} = \sqrt{\frac{2(2.35\text{ J})}{0.500\text{ kg}}} = \sqrt{9.40} \approx 3.07\text{ m/s}

    You applied the work-energy theorem with correct algebra and accurate arithmetic, but the final speed is shifted due to the carried-over total work.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the work done equals the geometric area under each segment of the Fx−xF_x-x graph.

You accurately calculated the areas for both the triangle in segment 1 and the trapezoid in segment 3.

You set up and evaluated the work-energy theorem correctly to solve for the final velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Coordinate vs. Interval Width Confusion

In segment 2, you wrote the base as 0.500 m0.500\text{ m} rather than subtracting the starting coordinate 0.200 m0.200\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When calculating geometric areas on a Cartesian graph, coordinates on an axis are sometimes treated directly as geometric lengths instead of computing the interval width Δx=xf−xi\Delta x = x_f - x_i.

REASONING PATH
Your ACEpath teacher’s suggested approach
Base Length of a Segment
  • The width of any geometric segment on an xx-axis from x1x_1 to x2x_2 is always Δx=x2−x1\Delta x = x_2 - x_1, not simply x2x_2.

  • Before calculating the area of any region not starting at the origin, write down Δx=xright−xleft\Delta x = x_{\text{right}} - x_{\text{left}} explicitly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. W2=(0.500 m−0.200 m)⋅4.00 N=0.300 m⋅4.00 N=1.20 JW_2 = (0.500\text{ m} - 0.200\text{ m}) \cdot 4.00\text{ N} = 0.300\text{ m} \cdot 4.00\text{ N} = 1.20\text{ J}

  2. W=W1+W2+W3=0.400 J+1.20 J+0.750 J=2.35 JW = W_1 + W_2 + W_3 = 0.400\text{ J} + 1.20\text{ J} + 0.750\text{ J} = 2.35\text{ J}

  3. vf=2⋅2.35 J0.500 kg=9.40≈3.07 m/sv_f = \sqrt{\frac{2 \cdot 2.35\text{ J}}{0.500\text{ kg}}} = \sqrt{9.40} \approx 3.07\text{ m/s}

Final answer

(a) W=2.35 JW = 2.35\text{ J}; (b) vf≈3.07 m/sv_f \approx 3.07\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always calculate and label the interval width Δx=xf−xi\Delta x = x_f - x_i for each piecewise segment on a graph before applying geometric area formulas.

  • Double-check that the sum of all segment widths matches the total displacement interval: Δx1+Δx2+Δx3=0.200+0.300+0.300=0.800 m\Delta x_1 + \Delta x_2 + \Delta x_3 = 0.200 + 0.300 + 0.300 = 0.800\text{ m}.

Lock it in

Similar question

01

A horizontal force acting on a 2.0 kg2.0\text{ kg} block decreases linearly from Fx=8.0 NF_x = 8.0\text{ N} at x=0 mx = 0\text{ m} to Fx=2.0 NF_x = 2.0\text{ N} at x=4.0 mx = 4.0\text{ m}. How much work is done by this force over the interval?

Answer

W=20 JW = 20\text{ J}. The area is a trapezoid: W=F1+F22Δx=8.0 N+2.0 N2⋅4.0 m=5.0 N⋅4.0 m=20 JW = \frac{F_1 + F_2}{2} \Delta x = \frac{8.0\text{ N} + 2.0\text{ N}}{2} \cdot 4.0\text{ m} = 5.0\text{ N} \cdot 4.0\text{ m} = 20\text{ J}.

02

A force acts on a 1.0 kg1.0\text{ kg} particle initially at rest. From x=0x = 0 to x=2.0 mx = 2.0\text{ m}, the force is constant at 6.0 N6.0\text{ N}. From x=2.0 mx = 2.0\text{ m} to x=5.0 mx = 5.0\text{ m}, the force drops linearly from 6.0 N6.0\text{ N} to 2.0 N2.0\text{ N}. Find the particle's speed at x=5.0 mx = 5.0\text{ m}.

Answer

vf=7.0 m/sv_f = 7.0\text{ m/s}. Step 1: W1=(2.0 m)(6.0 N)=12 JW_1 = (2.0\text{ m})(6.0\text{ N}) = 12\text{ J}. Step 2: W2=6.0 N+2.0 N2(3.0 m)=12 JW_2 = \frac{6.0\text{ N} + 2.0\text{ N}}{2}(3.0\text{ m}) = 12\text{ J}. Total work W=12 J+12 J=24 JW = 12\text{ J} + 12\text{ J} = 24\text{ J}. Step 3: By work-energy, vf=2Wm=2(24)1.0=48≈6.93 m/sv_f = \sqrt{\frac{2W}{m}} = \sqrt{\frac{2(24)}{1.0}} = \sqrt{48} \approx 6.93\text{ m/s} (or ≈7.0 m/s\approx 7.0\text{ m/s}).

03

A cart of mass m=0.80 kgm = 0.80\text{ kg} moving at 1.0 m/s1.0\text{ m/s} experiences a forward force: FxF_x increases linearly from 2.0 N2.0\text{ N} at x=0x = 0 to 6.0 N6.0\text{ N} at x=3.0 mx = 3.0\text{ m}, then decreases linearly to 4.0 N4.0\text{ N} at x=5.0 mx = 5.0\text{ m}. Calculate the cart's kinetic energy and speed at x=5.0 mx = 5.0\text{ m}.

Answer

Kf=22.4 JK_f = 22.4\text{ J}, vf≈7.48 m/sv_f \approx 7.48\text{ m/s}. Initial kinetic energy: Ki=12(0.80)(1.0)2=0.40 JK_i = \frac{1}{2}(0.80)(1.0)^2 = 0.40\text{ J}. Work done: W1=2.0+6.02(3.0)=12.0 JW_1 = \frac{2.0 + 6.0}{2}(3.0) = 12.0\text{ J}, W2=6.0+4.02(2.0)=10.0 JW_2 = \frac{6.0 + 4.0}{2}(2.0) = 10.0\text{ J}, so W=22.0 JW = 22.0\text{ J}. Net work theorem: Kf=Ki+W=0.40 J+22.0 J=22.4 JK_f = K_i + W = 0.40\text{ J} + 22.0\text{ J} = 22.4\text{ J}. Speed: vf=2Kfm=2(22.4)0.80=56≈7.48 m/sv_f = \sqrt{\frac{2K_f}{m}} = \sqrt{\frac{2(22.4)}{0.80}} = \sqrt{56} \approx 7.48\text{ m/s}.

Loading workspace…