Resources

A metallic surface has a photoelectric work function of Φ=2.85 eV\Phi = 2.85\text{ eV}. (a) Calculate the exact threshold cutoff wavelength λthreshold\lambda_{\text{threshold}} in nm\text{nm} that marks the critical boundary between electron emission and complete extinction of photoemission. (b) If monochromatic light of wavelength λ=445 nm\lambda = 445\text{ nm} is directed at the metal, will photoelectrons be emitted? Support your answer by comparing the photon energy to Φ\Phi. (c) If the intensity of the 445 nm445\text{ nm} beam is increased tenfold, explain quantitatively whether photoemission will initiate. Use h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s} and c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}.

Answer and steps

Final answer

(a) λthreshold=436 nm\lambda_{\text{threshold}} = 436\text{ nm}; (b) No, because Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}; (c) No, because individual photon energy remains 2.79 eV2.79\text{ eV}, and classical intensity accumulation does not satisfy the quantum energy threshold condition.

Steps

Part (a): Threshold Cutoff Wavelength (λthreshold\lambda_{\text{threshold}})

The work function Φ\Phi represents the minimum energy required to liberate an electron from the metal surface:

Φ=2.85 eV×1.602×10−19 J/eV=4.566×10−19 J\Phi = 2.85\text{ eV} \times 1.602 \times 10^{-19}\text{ J/eV} = 4.566 \times 10^{-19}\text{ J}

The threshold cutoff wavelength corresponds to a photon having exactly this energy:

E=hcλthreshold=ΦE = \frac{hc}{\lambda_{\text{threshold}}} = \Phi

Rearranging for λthreshold\lambda_{\text{threshold}}:

λthreshold=hcΦ=(6.626×10−34 J⋅s)(3.00×108 m/s)4.566×10−19 J\lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{4.566 \times 10^{-19}\text{ J}}

λthreshold≈4.353×10−7 m≈436 nm\lambda_{\text{threshold}} \approx 4.353 \times 10^{-7}\text{ m} \approx 436\text{ nm}

Any incident light with a wavelength longer than 436 nm436\text{ nm} has photons with insufficient energy to overcome Φ\Phi.


Part (b): Emission for λ=445 nm\lambda = 445\text{ nm}

Calculate the energy of a single photon at λ=445 nm=445×10−9 m\lambda = 445\text{ nm} = 445 \times 10^{-9}\text{ m}:

Ephoton=hcλ=(6.626×10−34 J⋅s)(3.00×108 m/s)445×10−9 m=4.467×10−19 JE_{\text{photon}} = \frac{hc}{\lambda} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{445 \times 10^{-9}\text{ m}} = 4.467 \times 10^{-19}\text{ J}

Convert this energy into electron-volts:

Ephoton=4.467×10−19 J1.602×10−19 J/eV≈2.79 eVE_{\text{photon}} = \frac{4.467 \times 10^{-19}\text{ J}}{1.602 \times 10^{-19}\text{ J/eV}} \approx 2.79\text{ eV}

Comparing EphotonE_{\text{photon}} to the work function:

Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}

Because the energy of each incident photon is strictly less than the work function Φ\Phi (or equivalently, λ=445 nm>λthreshold=436 nm\lambda = 445\text{ nm} > \lambda_{\text{threshold}} = 436\text{ nm}), no photoelectrons will be emitted.


Part (c): Effect of Increasing Beam Intensity

According to Einstein's quantum model of the photoelectric effect, light interacts with electrons on a discrete, one-photon-to-one-electron basis.

  • Intensity in the quantum picture: Increasing beam intensity increases only the photon flux (the number of photons incident per unit area per second), but leaves the frequency, wavelength, and individual photon energy unchanged: Ephoton=2.79 eVE_{\text{photon}} = 2.79\text{ eV}
  • Threshold condition: Because each individual photon still possesses less energy than the surface work function (2.79 eV<2.85 eV2.79\text{ eV} < 2.85\text{ eV}), no single photon can dislodge an electron.
  • Classical pitfall: In classical wave theory, continuous wave energy would accumulate on the surface until emission occurs. In quantum reality, electrons cannot store energy across multiple sub-threshold photon collisions.

Therefore, increasing the intensity tenfold will not initiate photoemission.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the work function from electron-volts to joules when using SI constants, resulting in an incorrect threshold wavelength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    λthreshold=hcΦ=6.626×10−34×3.00×1082.85=6.97×10−26 m⟹6.97×10−17 nm\lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{6.626 \times 10^{-34} \times 3.00 \times 10^8}{2.85} = 6.97 \times 10^{-26}\text{ m} \Longrightarrow 6.97 \times 10^{-17}\text{ nm}

    Correct

    λthreshold=hcΦ=(6.626×10−34 J⋅s)(3.00×108 m/s)2.85×1.602×10−19 J≈436 nm\lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{2.85 \times 1.602 \times 10^{-19}\text{ J}} \approx 436\text{ nm}

    You substituted Φ=2.85\Phi = 2.85 directly in electron-volts (eV\text{eV}), but Planck's constant hh and light speed cc are in SI units (J⋅s\text{J}\cdot\text{s} and m/s\text{m/s}). You must convert Φ\Phi to joules by multiplying by 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} before dividing.

  2. Step 2

    E=hcλ=6.626×10−34×3.00×108445×10−9=4.47×10−19 J⟹E=4.47×10−191.602×10−19=2.79 eV⟹E<Φ (2.79 eV<2.85 eV)E = \frac{hc}{\lambda} = \frac{6.626 \times 10^{-34} \times 3.00 \times 10^8}{445 \times 10^{-9}} = 4.47 \times 10^{-19}\text{ J} \Longrightarrow E = \frac{4.47 \times 10^{-19}}{1.602 \times 10^{-19}} = 2.79\text{ eV} \Longrightarrow E < \Phi\ (2.79\text{ eV} < 2.85\text{ eV}), so photoelectrons are not emitted

  3. Step 3

    Intensity increases photon count but each photon still has E=2.79 eVE = 2.79\text{ eV}. Since E<ΦE < \Phi, photoemission will still not initiate.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the threshold formula λthreshold=hcΦ\lambda_{\text{threshold}} = \frac{hc}{\Phi}.

You accurately computed the energy of a 445 nm445\text{ nm} photon and correctly converted between joules and electron-volts in part (b).

You clearly articulated that beam intensity changes only photon count, not individual photon energy, correctly identifying why emission cannot initiate.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

You omitted the conversion factor 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} when dividing by Φ\Phi in SI units.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked unit consistency across the numerator and denominator in the formula λ=hcΦ\lambda = \frac{hc}{\Phi}, mixing SI constants (hh in J⋅s\text{J}\cdot\text{s}) with an energy given in non-SI electron-volts (eV\text{eV}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency in Quantum Formulas
  • In λ=hcE\lambda = \frac{hc}{E}, if hh is in J⋅s\text{J}\cdot\text{s} and cc is in m/s\text{m/s}, energy EE must be in Joules (J\text{J}).

  • Multiply energies given in eV\text{eV} by 1.602×10−19 J/eV1.602 \times 10^{-19}\text{ J/eV} before calculating wavelength in meters, or use hc≈1240 eV⋅nmhc \approx 1240\text{ eV}\cdot\text{nm} directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Φ=2.85 eV×1.602×10−19 J/eV=4.566×10−19 J\Phi = 2.85\text{ eV} \times 1.602 \times 10^{-19}\text{ J/eV} = 4.566 \times 10^{-19}\text{ J}

  2. λthreshold=hcΦ=(6.626×10−34 J⋅s)(3.00×108 m/s)4.566×10−19 J≈4.353×10−7 m\lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{(6.626 \times 10^{-34}\text{ J}\cdot\text{s})(3.00 \times 10^8\text{ m/s})}{4.566 \times 10^{-19}\text{ J}} \approx 4.353 \times 10^{-7}\text{ m}

  3. λthreshold=4.353×10−7 m×109 nm/m≈436 nm\lambda_{\text{threshold}} = 4.353 \times 10^{-7}\text{ m} \times 10^9\text{ nm/m} \approx 436\text{ nm}

Final answer

(a) λthreshold=436 nm\lambda_{\text{threshold}} = 436\text{ nm}; (b) No, because Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}; (c) No, because individual photon energy remains 2.79 eV2.79\text{ eV}, and increasing intensity only increases the photon flux.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always perform a quick dimensional check to ensure energy units cancel properly between hh (J⋅s\text{J}\cdot\text{s}) and EE (J\text{J}).

  • Remember the handy shortcut hc≈1240 eV⋅nmhc \approx 1240\text{ eV}\cdot\text{nm}, which allows you to calculate λ=1240 eV⋅nmΦ in eV\lambda = \frac{1240\text{ eV}\cdot\text{nm}}{\Phi\text{ in eV}} directly without manual unit conversion.

OverviewACEpath Teacher's Diagnosis

02 The student misapplies the wavelength threshold condition by assuming photoemission occurs when wavelength is greater than the threshold wavelength rather than less.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Φ=2.85×1.602×10−19 J=4.566×10−19 J  ⟹  λthreshold=hcΦ=(6.626×10−34×3.00×108)4.566×10−19=4.35×10−7 m=435 nm\Phi = 2.85 \times 1.602 \times 10^{-19}\text{ J} = 4.566 \times 10^{-19}\text{ J} \implies \lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{(6.626 \times 10^{-34} \times 3.00 \times 10^8)}{4.566 \times 10^{-19}} = 4.35 \times 10^{-7}\text{ m} = 435\text{ nm}

  2. Step 2

    E=hcλ=(6.626×10−34×3.00×108)445×10−9=2.79 eVE = \frac{hc}{\lambda} = \frac{(6.626 \times 10^{-34} \times 3.00 \times 10^8)}{445 \times 10^{-9}} = 2.79\text{ eV}

  3. Step 3

    λ=445 nm>λthreshold=435 nm, so photoelectrons will be emitted\lambda = 445\text{ nm} > \lambda_{\text{threshold}} = 435\text{ nm}\text{, so photoelectrons will be emitted}

    Correct

    Ephoton=2.79 eV<Φ=2.85 eV (or λ=445 nm>λthreshold=436 nm), so no photoelectrons will be emitted.E_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}\text{ (or }\lambda = 445\text{ nm} > \lambda_{\text{threshold}} = 436\text{ nm}\text{), so no photoelectrons will be emitted.}

    Because photon energy is inversely proportional to wavelength (E=hcλE = \frac{hc}{\lambda}), a higher energy requires a shorter wavelength. Emission requires E≥ΦE \ge \Phi, which corresponds to λ≤λthreshold\lambda \le \lambda_{\text{threshold}}. Since 445 nm>436 nm445\text{ nm} > 436\text{ nm}, each photon carries insufficient energy (2.79 eV<2.85 eV2.79\text{ eV} < 2.85\text{ eV}) to overcome the work function.

  4. Step 4

    Photoemission already occurs, and tenfold intensity increases the emission rate tenfold

    Correct

    Increasing the intensity tenfold increases the photon arrival rate, but each individual photon still has E=2.79 eV<2.85 eVE = 2.79\text{ eV} < 2.85\text{ eV}. Therefore, no photoemission occurs.

    Because this conclusion depends on your earlier deduction that emission was already taking place, the answer is affected. In the quantum model, electrons cannot accumulate energy from multiple sub-threshold photons; increasing intensity cannot initiate photoemission.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the work function between electron-volts and joules.

You accurately calculated the threshold cutoff wavelength using the photoelectric equation.

You determined the precise energy of an incident 445 nm445\text{ nm} photon.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wavelength Threshold Inequality Inversion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the wavelength threshold condition as λ>λthreshold\lambda > \lambda_{\text{threshold}} by analogy with the energy condition E>ΦE > \Phi, overlooking the inverse relationship between photon energy and wavelength (E∝1λE \propto \frac{1}{\lambda}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse Energy-Wavelength Relationship
  • E=hcλE = \frac{hc}{\lambda}, meaning shorter wavelengths correspond to higher photon energies.

  • Whenever comparing wavelengths for photoemission, check that λ≤λcutoff\lambda \le \lambda_{\text{cutoff}} represents the emission zone, or directly compare energies: Ephoton≥ΦE_{\text{photon}} \ge \Phi.

Quantum Nature of Intensity
  • Intensity represents photon flux, not individual photon energy.

  • Check whether Ephoton≥ΦE_{\text{photon}} \ge \Phi before considering beam intensity; if individual photons lack sufficient energy, no amount of intensity will cause emission.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compare the photon energy directly to the work function: Ephoton=2.79 eVE_{\text{photon}} = 2.79\text{ eV} and Φ=2.85 eV\Phi = 2.85\text{ eV}.

  2. Note that Ephoton<ΦE_{\text{photon}} < \Phi, or equivalently λ=445 nm>λthreshold≈436 nm\lambda = 445\text{ nm} > \lambda_{\text{threshold}} \approx 436\text{ nm}. Conclude that no photoelectrons are emitted for part (b).

  3. For part (c), recognize that increasing beam intensity increases only the number of photons per second, keeping each photon at 2.79 eV2.79\text{ eV}. Because 2.79 eV<2.85 eV2.79\text{ eV} < 2.85\text{ eV}, photoemission will not initiate.

Final answer

(a) λthreshold≈436 nm\lambda_{\text{threshold}} \approx 436\text{ nm}; (b) No, because Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}; (c) No, because individual photon energy remains 2.79 eV2.79\text{ eV}, which is below the work function.

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down E∝1λE \propto \frac{1}{\lambda} as a reminder that maximum wavelength corresponds to minimum required energy.

  • Double-check threshold questions by evaluating both energy inequality (E≥ΦE \ge \Phi) and wavelength inequality (λ≤λmax\lambda \le \lambda_{\text{max}}) to ensure they agree.

OverviewACEpath Teacher's Diagnosis

03 The student applies classical wave theory by multiplying photon energy by the tenfold intensity factor to erroneously conclude photoemission initiates.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Φ=2.85×1.602×10−19 J=4.566×10−19 J  ⟹  λthreshold=hcΦ=6.626×10−34×3.00×1084.566×10−19=435 nm\Phi = 2.85 \times 1.602 \times 10^{-19}\text{ J} = 4.566 \times 10^{-19}\text{ J} \implies \lambda_{\text{threshold}} = \frac{hc}{\Phi} = \frac{6.626 \times 10^{-34} \times 3.00 \times 10^8}{4.566 \times 10^{-19}} = 435\text{ nm}

  2. Step 2

    E=hcλ=6.626×10−34×3.00×108445×10−9=4.47×10−19 J=2.79 eV  ⟹  Since 2.79 eV<2.85 eV, photoelectrons will not be emittedE = \frac{hc}{\lambda} = \frac{6.626 \times 10^{-34} \times 3.00 \times 10^8}{445 \times 10^{-9}} = 4.47 \times 10^{-19}\text{ J} = 2.79\text{ eV} \implies \text{Since } 2.79\text{ eV} < 2.85\text{ eV}\text{, photoelectrons will not be emitted}

  3. Step 3

    Increasing intensity tenfold gives 27.9 eV  ⟹  Since 27.9 eV>2.85 eV, photoemission will initiate\text{Increasing intensity tenfold gives } 27.9\text{ eV} \implies \text{Since } 27.9\text{ eV} > 2.85\text{ eV}\text{, photoemission will initiate}

    Correct

    Intensity increases photon flux, but Ephoton=hcλ=2.79 eV remains unchanged. Since 2.79 eV<2.85 eV, photoemission will not initiate.\text{Intensity increases photon flux, but } E_{\text{photon}} = \frac{hc}{\lambda} = 2.79\text{ eV} \text{ remains unchanged. Since } 2.79\text{ eV} < 2.85\text{ eV}\text{, photoemission will not initiate.}

    Increasing the beam intensity increases the number of photons arriving per second, not the energy carried by each individual photon. Because an electron absorbs only one photon at a time, emission cannot take place below the threshold frequency regardless of intensity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the metal work function between electron-volts and joules.

You accurately derived the threshold cutoff wavelength using the fundamental relation λ=hcΦ\lambda = \frac{hc}{\Phi}.

You correctly compared individual photon energy with the surface work function in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Classical wave intensity confusion in photoelectric effect

You scaled the single-photon energy by the tenfold beam intensity factor instead of treating intensity as photon flux.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the classical wave model—where light energy accumulates continuously on a surface—instead of Einstein's quantum model, where light arrives in discrete quanta and interacts on a strict one-to-one basis with electrons.

REASONING PATH
Your ACEpath teacher’s suggested approach
Photon Energy vs. Beam Intensity
  • Photon energy depends strictly on frequency/wavelength (E=hf=hcλE = hf = \frac{hc}{\lambda}); beam intensity determines the photon arrival rate (flux), not individual photon energy.

  • Keep individual photon energy EE constant when changing beam intensity, and evaluate the threshold condition on a per-photon basis.

Quantum Interaction Mechanism
  • Photoelectric absorption is a one-photon-to-one-electron process under normal beam intensities, preventing energy accumulation across multiple sub-threshold photons.

  • Conclude that no emission occurs at any intensity if the single-photon energy is strictly less than the work function Φ\Phi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that a tenfold increase in intensity increases the number of incident photons per second tenfold, while the wavelength remains λ=445 nm\lambda = 445\text{ nm}.

  2. Evaluate the energy of each incoming photon: Ephoton=hcλ=2.79 eVE_{\text{photon}} = \frac{hc}{\lambda} = 2.79\text{ eV}.

  3. Apply the quantum threshold condition: since each collision involves exactly one photon and Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}, no electron can escape.

  4. Conclude that photoemission will not initiate.

Final answer

(a) λthreshold=436 nm\lambda_{\text{threshold}} = 436\text{ nm}; (b) No, because Ephoton=2.79 eV<Φ=2.85 eVE_{\text{photon}} = 2.79\text{ eV} < \Phi = 2.85\text{ eV}; (c) No, because increasing intensity only increases photon flux while individual photon energy remains 2.79 eV<2.85 eV2.79\text{ eV} < 2.85\text{ eV}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between photon flux (intensity) and photon energy (E=hfE = hf).

  • Practice qualitative and quantitative problems testing the 1-to-1 photon-electron absorption model.

Lock it in

Similar question

01

A cesium surface has a work function of Φ=2.14 eV\Phi = 2.14\text{ eV}. Calculate the cutoff threshold wavelength λthreshold\lambda_{\text{threshold}} in nm\text{nm}. (Use h=6.626×10−34 J⋅sh = 6.626 \times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00 \times 10^8\text{ m/s}, and 1 eV=1.602×10−19 J1\text{ eV} = 1.602 \times 10^{-19}\text{ J}).

Answer

λthreshold≈580 nm\lambda_{\text{threshold}} \approx 580\text{ nm}. Convert Φ=2.14×1.602×10−19 J=3.428×10−19 J\Phi = 2.14 \times 1.602 \times 10^{-19}\text{ J} = 3.428 \times 10^{-19}\text{ J}. Then λ=hcΦ=1.988×10−25 J⋅m3.428×10−19 J≈5.80×10−7 m=580 nm\lambda = \frac{hc}{\Phi} = \frac{1.988 \times 10^{-25}\text{ J}\cdot\text{m}}{3.428 \times 10^{-19}\text{ J}} \approx 5.80 \times 10^{-7}\text{ m} = 580\text{ nm}.

02

Monochromatic ultraviolet light with λ=250 nm\lambda = 250\text{ nm} strikes a metal with work function Φ=4.20 eV\Phi = 4.20\text{ eV}. Determine: (a) the photon energy in eV\text{eV}, and (b) whether photoelectrons are emitted and their maximum kinetic energy KmaxK_{\text{max}} in eV\text{eV}.

Answer

(a) Ephoton=4.96 eVE_{\text{photon}} = 4.96\text{ eV}; (b) Yes, photoelectrons are emitted with Kmax=0.76 eVK_{\text{max}} = 0.76\text{ eV}. Steps: E=hcλ=1.988×10−25 J⋅m2.50×10−7 m=7.95×10−19 J=4.96 eVE = \frac{hc}{\lambda} = \frac{1.988 \times 10^{-25}\text{ J}\cdot\text{m}}{2.50 \times 10^{-7}\text{ m}} = 7.95 \times 10^{-19}\text{ J} = 4.96\text{ eV}. Since E>ΦE > \Phi, emission occurs with Kmax=E−Φ=4.96 eV−4.20 eV=0.76 eVK_{\text{max}} = E - \Phi = 4.96\text{ eV} - 4.20\text{ eV} = 0.76\text{ eV}.

03

Light of wavelength 500 nm500\text{ nm} produces no photoelectrons from a clean metal plate, even when the intensity is 1000 W/m21000\text{ W/m}^2. However, light of wavelength 300 nm300\text{ nm} with an intensity of only 1 W/m21\text{ W/m}^2 immediately causes electron emission. Explain quantitatively why this occurs in terms of photon energy and photon flux.

Answer

For λ=500 nm\lambda = 500\text{ nm}, each photon carries E=1240500=2.48 eVE = \frac{1240}{500} = 2.48\text{ eV}, which is below the metal's work function (Φ>2.48 eV\Phi > 2.48\text{ eV}); high intensity only increases the number of sub-threshold photons per second, which cannot pool energy. For λ=300 nm\lambda = 300\text{ nm}, each photon carries E=1240300=4.13 eV>ΦE = \frac{1240}{300} = 4.13\text{ eV} > \Phi; even at very low intensity (low photon flux), individual photons deliver sufficient energy in discrete one-to-one collisions to eject electrons immediately.

Loading workspace…