Resources

Two large parallel conducting plates are aligned vertically at x=0 cmx = 0\text{ cm} and x=12.0 cmx = 12.0\text{ cm}. Plate 1 (at x=0 cmx = 0\text{ cm}) is held at an electric potential of V1=−450 VV_1 = -450\text{ V}, and Plate 2 (at x=12.0 cmx = 12.0\text{ cm}) is held at V2=+150 VV_2 = +150\text{ V}. (a) Determine the magnitude and Cartesian direction of the uniform electric field E⃗\vec{E} between the plates. (b) An electron (q=−e=−1.602×10−19 Cq = -e = -1.602 \times 10^{-19}\text{ C}, m=9.109×10−31 kgm = 9.109 \times 10^{-31}\text{ kg}) is released from rest at x=9.00 cmx = 9.00\text{ cm}. Calculate the change in electric potential ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}} as the electron moves from its initial position to Plate 2. (c) Calculate the work done by the electric field WfieldW_{\text{field}} on the electron, and evaluate whether the electron's electric potential energy increases or decreases upon reaching Plate 2.

Answer and steps

Final answer

(a) E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath} (magnitude 5.00×103 V/m5.00 \times 10^3\text{ V/m}, pointing in the −ı^-\hat{\imath} direction); (b) ΔV=+150 V\Delta V = +150\text{ V}; (c) Wfield=−2.40×10−17 JW_{\text{field}} = -2.40 \times 10^{-17}\text{ J}; the electric potential energy increases by ΔU=+2.40×10−17 J\Delta U = +2.40 \times 10^{-17}\text{ J}.

Steps

Part (a): Electric Field Between the Plates

In a region between two large, parallel conducting plates, the electric field is uniform. The relationship between the electric field component along the xx-axis, ExE_x, and the electric potential difference is given by:

Ex=−ΔVΔx=−V2−V1x2−x1E_x = -\frac{\Delta V}{\Delta x} = -\frac{V_2 - V_1}{x_2 - x_1}

Substitute the given values for Plate 1 (x1=0 cm=0 mx_1 = 0\text{ cm} = 0\text{ m}, V1=−450 VV_1 = -450\text{ V}) and Plate 2 (x2=12.0 cm=0.120 mx_2 = 12.0\text{ cm} = 0.120\text{ m}, V2=+150 VV_2 = +150\text{ V}):

Ex=−+150 V−(−450 V)0.120 m−0 m=−600 V0.120 m=−5.00×103 V/mE_x = -\frac{+150\text{ V} - (-450\text{ V})}{0.120\text{ m} - 0\text{ m}} = -\frac{600\text{ V}}{0.120\text{ m}} = -5.00 \times 10^3\text{ V/m}

In vector notation:

E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}

The magnitude of the electric field is 5.00×103 V/m5.00 \times 10^3\text{ V/m}, and it points in the negative xx-direction (−ı^-\hat{\imath}, from higher potential to lower potential).


Part (b): Change in Electric Potential (ΔV\Delta V)

Because the field is uniform, the electric potential V(x)V(x) varies linearly from Plate 1 to Plate 2:

V(x)=V1−Ex(x−x1)=−450 V−(−5.00×103 V/m)(x−0)=−450+5.00×103xV(x) = V_1 - E_x(x - x_1) = -450\text{ V} - (-5.00 \times 10^3\text{ V/m})(x - 0) = -450 + 5.00 \times 10^3 x

Calculate the potential at the electron's initial position xinitial=9.00 cm=0.0900 mx_{\text{initial}} = 9.00\text{ cm} = 0.0900\text{ m}:

Vinitial=−450 V+(5.00×103 V/m)(0.0900 m)=−450 V+450 V=0 VV_{\text{initial}} = -450\text{ V} + (5.00 \times 10^3\text{ V/m})(0.0900\text{ m}) = -450\text{ V} + 450\text{ V} = 0\text{ V}

The final position is Plate 2, where Vfinal=V2=+150 VV_{\text{final}} = V_2 = +150\text{ V}.

The change in electric potential is:

ΔV=Vfinal−Vinitial=+150 V−0 V=+150 V\Delta V = V_{\text{final}} - V_{\text{initial}} = +150\text{ V} - 0\text{ V} = +150\text{ V}


Part (c): Work Done and Potential Energy Change

The work done on a charged particle of charge qq moving across a potential difference ΔV\Delta V is evaluated as:

Wfield=qΔVW_{\text{field}} = q \Delta V

Substitute q=−1.602×10−19 Cq = -1.602 \times 10^{-19}\text{ C} and ΔV=+150 V\Delta V = +150\text{ V}:

Wfield=(−1.602×10−19 C)(+150 V)=−2.403×10−17 J≈−2.40×10−17 JW_{\text{field}} = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.403 \times 10^{-17}\text{ J} \approx -2.40 \times 10^{-17}\text{ J}

The relationship between the work done and the change in electric potential energy ΔU\Delta U is:

ΔU=−Wfield=−(−2.40×10−17 J)=+2.40×10−17 J\Delta U = -W_{\text{field}} = -(-2.40 \times 10^{-17}\text{ J}) = +2.40 \times 10^{-17}\text{ J}

Because ΔU>0\Delta U > 0, the electron's electric potential energy increases by +2.40×10−17 J+2.40 \times 10^{-17}\text{ J} upon reaching Plate 2.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes the electric field points in the direction of increasing potential (from low to high potential), leading to an incorrect positive x-direction for the field.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=150 V−(−450 V)=600 V  ⟹  d=0.120 m  ⟹  E=600 V0.120 m=5000 V/m\Delta V = 150\text{ V} - (-450\text{ V}) = 600\text{ V} \implies d = 0.120\text{ m} \implies E = \frac{600\text{ V}}{0.120\text{ m}} = 5000\text{ V/m}

  2. Step 2

    "The electric field points from −450 V-450\text{ V} to +150 V+150\text{ V}, which is in the +x+x direction."

    Correct

    E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath} (points from +150 V+150\text{ V} toward −450 V-450\text{ V}, in the negative xx-direction)

    Electric field lines always point from higher potential to lower potential (Ex=−ΔVΔxE_x = -\frac{\Delta V}{\Delta x}). Because Plate 2 (+150 V+150\text{ V}) is at a higher potential than Plate 1 (−450 V-450\text{ V}), E⃗\vec{E} points in the −ı^-\hat{\imath} direction.

  3. Step 3

    V(9 cm)=−450 V+(600 V12 cm)(9 cm)=0 V  ⟹  ΔV=150 V−0 V=+150 VV(9\text{ cm}) = -450\text{ V} + \left(\frac{600\text{ V}}{12\text{ cm}}\right)(9\text{ cm}) = 0\text{ V} \implies \Delta V = 150\text{ V} - 0\text{ V} = +150\text{ V}

  4. Step 4

    Wfield=−qΔV=−(−1.602×10−19 C)(150 V)=+2.40×10−17 J  ⟹  W_{\text{field}} = -q \Delta V = -(-1.602 \times 10^{-19}\text{ C})(150\text{ V}) = +2.40 \times 10^{-17}\text{ J} \implies electric potential energy decreases

    Correct

    Wfield=−2.40×10−17 J  ⟹  ΔU=+2.40×10−17 JW_{\text{field}} = -2.40 \times 10^{-17}\text{ J} \implies \Delta U = +2.40 \times 10^{-17}\text{ J} (electric potential energy increases)

    Using the work relation Wfield=qΔVW_{\text{field}} = q \Delta V gives Wfield=(−1.602×10−19 C)(+150 V)=−2.40×10−17 JW_{\text{field}} = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.40 \times 10^{-17}\text{ J}. Since ΔU=−Wfield\Delta U = -W_{\text{field}}, the electric potential energy increases by +2.40×10−17 J+2.40 \times 10^{-17}\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the electric field as 5.00×103 V/m5.00 \times 10^3\text{ V/m}.

You accurately interpolated the electric potential at x=9.00 cmx = 9.00\text{ cm} to be 0 V0\text{ V}.

You correctly computed the potential difference ΔV=+150 V\Delta V = +150\text{ V} between the release point and Plate 2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Electric Field Direction from Potential

You assumed that the electric field points from lower potential to higher potential, which led to the wrong vector direction in part (a).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Electric field lines always point in the direction of decreasing potential (from high potential to low potential), governed by the differential relation E⃗=−∇V\vec{E} = -\nabla V or Ex=−ΔVΔxE_x = -\frac{\Delta V}{\Delta x}. Misremembering this sign convention causes an inverted vector direction for E⃗\vec{E} and confusion when tracking work and potential energy changes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Field Direction Rule
  • An electric field points downhill in potential: from high VV to low VV, satisfying Ex=−ΔVΔxE_x = -\frac{\Delta V}{\Delta x}.

  • Identify the higher-potential boundary (+150 V+150\text{ V}) and draw field vectors pointing directly toward the lower-potential boundary (−450 V-450\text{ V}).

Work and Potential Energy Sign
  • Work done across a potential difference is evaluated with careful attention to charge sign, and ΔU=−Wfield\Delta U = -W_{\text{field}}.

  • Double-check whether the electric force opposes or aids the displacement to confirm whether the field does negative or positive work.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Since V2=+150 VV_2 = +150\text{ V} and V1=−450 VV_1 = -450\text{ V}, potential decreases from right to left (toward −x-x). Therefore, Ex=−150 V−(−450 V)0.120 m−0 m=−5.00×103 V/mE_x = -\frac{150\text{ V} - (-450\text{ V})}{0.120\text{ m} - 0\text{ m}} = -5.00 \times 10^3\text{ V/m}, so E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}.

  2. For part (c), calculate work via Wfield=qΔV=(−1.602×10−19 C)(+150 V)=−2.40×10−17 JW_{\text{field}} = q \Delta V = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.40 \times 10^{-17}\text{ J}.

  3. Evaluate the potential energy change using ΔU=−Wfield=−(−2.40×10−17 J)=+2.40×10−17 J\Delta U = -W_{\text{field}} = -(-2.40 \times 10^{-17}\text{ J}) = +2.40 \times 10^{-17}\text{ J}, meaning the electric potential energy increases.

Final answer

(a) E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}; (b) ΔV=+150 V\Delta V = +150\text{ V}; (c) Wfield=−2.40×10−17 JW_{\text{field}} = -2.40 \times 10^{-17}\text{ J}, electric potential energy increases by +2.40×10−17 J+2.40 \times 10^{-17}\text{ J}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the fundamental rule: electric field lines always point from higher potential to lower potential.

  • Practice drawing field vectors alongside potential values before doing any numerical substitution.

  • Verify work and potential energy signs by checking if a negative charge is moving toward higher potential.

OverviewACEpath Teacher's Diagnosis

02 The student omits the negative sign in the relationship between work done by an electric field and potential difference, writing W = q ΔV instead of W = -q ΔV.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=150 V−(−450 V)=600 V  ⟹  E=600 V0.120 m=5000 V/m  ⟹  Electric field points from high potential to low potential, so it points in the −x direction.\Delta V = 150\text{ V} - (-450\text{ V}) = 600\text{ V} \implies E = \frac{600\text{ V}}{0.120\text{ m}} = 5000\text{ V/m} \implies \text{Electric field points from high potential to low potential, so it points in the } -x \text{ direction.}

  2. Step 2

    Vinitial=−450 V+(5000 V/m)(0.090 m)=0 V  ⟹  ΔV=150 V−0 V=+150 VV_{\text{initial}} = -450\text{ V} + (5000\text{ V/m})(0.090\text{ m}) = 0\text{ V} \implies \Delta V = 150\text{ V} - 0\text{ V} = +150\text{ V}

  3. Step 3

    Wfield=qΔV  ⟹  Wfield=−2.40×10−17 J  ⟹  Because Wfield is negative, the electric potential energy increases.W_{\text{field}} = q \Delta V \implies W_{\text{field}} = -2.40 \times 10^{-17}\text{ J} \implies \text{Because } W_{\text{field}} \text{ is negative, the electric potential energy increases.}

    Correct

    Wfield=−qΔV=−(−1.602×10−19 C)(+150 V)=+2.40×10−17 JW_{\text{field}} = -q\Delta V = -(-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = +2.40 \times 10^{-17}\text{ J}, and ΔU=−Wfield=−2.40×10−17 J\Delta U = -W_{\text{field}} = -2.40 \times 10^{-17}\text{ J} (potential energy decreases).

    The work done by an internal conservative electric field is defined as Wfield=−ΔU=−qΔVW_{\text{field}} = -\Delta U = -q\Delta V. Because you used Wfield=qΔVW_{\text{field}} = q\Delta V, your calculated work came out negative instead of positive. Since the negative electron naturally accelerates toward higher potential, the electric field does positive work on it, and its electric potential energy decreases.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the potential gradient to the uniform electric field magnitude and direction.

You accurately determined the initial potential at x=9.00 cmx = 9.00\text{ cm} and calculated the net potential difference ΔV\Delta V.

You correctly recognized the fundamental connection ΔU=−Wfield\Delta U = -W_{\text{field}} between field work and potential energy change.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Electric Field Work Formula

You used the external work formula Wext=qΔVW_{\text{ext}} = q\Delta V instead of the field work formula Wfield=−qΔVW_{\text{field}} = -q\Delta V.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the work done by the electric field (Wfield=−ΔU=−qΔVW_{\text{field}} = -\Delta U = -q\Delta V) with the work done by an external agent to move a charge without acceleration (Wext=ΔU=qΔVW_{\text{ext}} = \Delta U = q\Delta V).

REASONING PATH
Your ACEpath teacher’s suggested approach
Internal Conservative Work vs. Potential Energy
  • For any conservative force, the work done by the field is the negative of the change in potential energy: Wfield=−ΔUW_{\text{field}} = -\Delta U.

  • Always write Wfield=−qΔVW_{\text{field}} = -q\Delta V and ΔU=qΔV\Delta U = q\Delta V before substituting numerical values.

Physical Reality Check for Charges
  • Negative charges naturally accelerate toward regions of higher electric potential (positive ΔV\Delta V).

  • When a particle moves in its natural acceleration direction, check that Wfield>0W_{\text{field}} > 0 and ΔU<0\Delta U < 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the correct definition of work done by the electric field: Wfield=−qΔVW_{\text{field}} = -q\Delta V.

  2. Substitute q=−1.602×10−19 Cq = -1.602 \times 10^{-19}\text{ C} and ΔV=+150 V\Delta V = +150\text{ V}: Wfield=−(−1.602×10−19 C)(+150 V)=+2.40×10−17 JW_{\text{field}} = -(-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = +2.40 \times 10^{-17}\text{ J}.

  3. Determine the change in electric potential energy: ΔU=−Wfield=−2.40×10−17 J\Delta U = -W_{\text{field}} = -2.40 \times 10^{-17}\text{ J}.

  4. Conclude that because ΔU<0\Delta U < 0, the electron's electric potential energy decreases upon reaching Plate 2.

Final answer

(a) E⃗=−5.00×103 V/m  ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\;\hat{\imath}; (b) ΔV=+150 V\Delta V = +150\text{ V}; (c) Wfield=+2.40×10−17 JW_{\text{field}} = +2.40 \times 10^{-17}\text{ J}, and the electron's electric potential energy decreases by 2.40×10−17 J2.40 \times 10^{-17}\text{ J}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Contrast Wfield=−qΔVW_{\text{field}} = -q\Delta V with Wext=+qΔVW_{\text{ext}} = +q\Delta V by writing down both formulas in your reference notes.

  • Practice checking the sign of work using physical direction: if the electric force F⃗=qE⃗\vec{F} = q\vec{E} and displacement Δx⃗\Delta\vec{x} point in the same direction, WfieldW_{\text{field}} must be positive.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the potential values in the wrong order when calculating the total potential difference, subtracting V2 from V1 to get -300 V instead of +600 V.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ΔV=150 V−450 V=−300 V  ⟹  E=300 V0.120 m=2500 V/m  ⟹  Field points toward lower potential, so it points in the −x direction.\Delta V = 150\text{ V} - 450\text{ V} = -300\text{ V} \implies E = \frac{300\text{ V}}{0.120\text{ m}} = 2500\text{ V/m} \implies \text{Field points toward lower potential, so it points in the } -x \text{ direction.}

    Correct

    ΔV=V2−V1=150 V−(−450 V)=+600 V  ⟹  E=600 V0.120 m=5.00×103 V/m  ⟹  E⃗=−5.00×103 V/m ı^\Delta V = V_2 - V_1 = 150\text{ V} - (-450\text{ V}) = +600\text{ V} \implies E = \frac{600\text{ V}}{0.120\text{ m}} = 5.00 \times 10^3\text{ V/m} \implies \vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}

    You subtracted +450 V+450\text{ V} instead of (−450 V)(-450\text{ V}). Because Plate 1 is at −450 V-450\text{ V}, the potential difference across the gap is V2−V1=150 V−(−450 V)=+600 VV_2 - V_1 = 150\text{ V} - (-450\text{ V}) = +600\text{ V}, which yields an electric field magnitude of 5.00×103 V/m5.00 \times 10^3\text{ V/m} rather than 2500 V/m2500\text{ V/m}.

  2. Step 2

    V(9 cm)=−450 V+(2500 V/m)(0.090 m)=−225 V  ⟹  ΔV=150 V−(−225 V)=+375 VV(9\text{ cm}) = -450\text{ V} + (2500\text{ V/m})(0.090\text{ m}) = -225\text{ V} \implies \Delta V = 150\text{ V} - (-225\text{ V}) = +375\text{ V}

    Correct

    V(0.0900 m)=−450 V+(5.00×103 V/m)(0.0900 m)=0 V  ⟹  ΔV=150 V−0 V=+150 VV(0.0900\text{ m}) = -450\text{ V} + (5.00 \times 10^3\text{ V/m})(0.0900\text{ m}) = 0\text{ V} \implies \Delta V = 150\text{ V} - 0\text{ V} = +150\text{ V}

    Your method of finding the potential at the release point and taking the difference is valid, but your result was affected by the incorrect electric field magnitude E=2500 V/mE = 2500\text{ V/m} carried forward from Step 1.

  3. Step 3

    Wfield=−qΔV=−(−1.602×10−19 C)(375 V)=+6.01×10−17 J  ⟹  Because positive work is done by the field, the electric potential energy decreases.W_{\text{field}} = -q\Delta V = -(-1.602 \times 10^{-19}\text{ C})(375\text{ V}) = +6.01 \times 10^{-17}\text{ J} \implies \text{Because positive work is done by the field, the electric potential energy decreases.}

    Correct

    Wfield=qΔV=(−1.602×10−19 C)(+150 V)=−2.40×10−17 J  ⟹  ΔU=−Wfield=+2.40×10−17 J (potential energy increases)W_{\text{field}} = q\Delta V = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.40 \times 10^{-17}\text{ J} \implies \Delta U = -W_{\text{field}} = +2.40 \times 10^{-17}\text{ J} \text{ (potential energy increases)}

    Using the reference definition Wfield=qΔVW_{\text{field}} = q\Delta V with the correct potential difference ΔV=+150 V\Delta V = +150\text{ V} gives Wfield=(−1.602×10−19 C)(+150 V)=−2.40×10−17 JW_{\text{field}} = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.40 \times 10^{-17}\text{ J}, which corresponds to an increase in electric potential energy of +2.40×10−17 J+2.40 \times 10^{-17}\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the uniform electric field points from higher potential toward lower potential along the negative xx-direction.

You correctly used a linear interpolation strategy to determine the electric potential at an intermediate plate position.

You correctly tracked units across all of your conversions from centimeters to meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in potential difference calculation

You wrote 150 V−450 V=−300 V150\text{ V} - 450\text{ V} = -300\text{ V} instead of accounting for the negative sign on Plate 1, which should be 150 V−(−450 V)=+600 V150\text{ V} - (-450\text{ V}) = +600\text{ V}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Dropping the negative sign of a negative coordinate or potential value when applying ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}} converts an intended addition into a subtraction, cutting the actual potential difference across the plates in half.

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve explicit parentheses for negative potentials
  • Always write ΔV=V2−(V1)\Delta V = V_2 - (V_1) with parentheses whenever V1<0V_1 < 0.

  • Substitute negative potentials inside explicit parentheses before simplifying to avoid losing double negatives.

Sanity-check total potential span
  • The potential span between a negative value and a positive value must be strictly larger than the magnitude of either individual value.

  • Check that ∣V2−V1∣>∣V1∣|V_2 - V_1| > |V_1| and ∣V2−V1∣>∣V2∣|V_2 - V_1| > |V_2| whenever the two potentials have opposite signs.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute ΔV=V2−V1=150 V−(−450 V)=150 V+450 V=+600 V\Delta V = V_2 - V_1 = 150\text{ V} - (-450\text{ V}) = 150\text{ V} + 450\text{ V} = +600\text{ V}.

  2. Calculate the electric field magnitude: E=∣ΔV∣Δx=600 V0.120 m=5.00×103 V/mE = \frac{|\Delta V|}{\Delta x} = \frac{600\text{ V}}{0.120\text{ m}} = 5.00 \times 10^3\text{ V/m}. Because Plate 2 is at higher potential than Plate 1, E⃗\vec{E} points in the −ı^-\hat{\imath} direction: E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}.

  3. Find the potential at x=0.0900 mx = 0.0900\text{ m}: V(0.0900 m)=−450 V+(5.00×103 V/m)(0.0900 m)=−450 V+450 V=0 VV(0.0900\text{ m}) = -450\text{ V} + (5.00 \times 10^3\text{ V/m})(0.0900\text{ m}) = -450\text{ V} + 450\text{ V} = 0\text{ V}.

  4. Find ΔV\Delta V from x=0.0900 mx = 0.0900\text{ m} to Plate 2: ΔV=150 V−0 V=+150 V\Delta V = 150\text{ V} - 0\text{ V} = +150\text{ V}.

  5. Calculate the work done by the field: Wfield=qΔV=(−1.602×10−19 C)(+150 V)=−2.40×10−17 JW_{\text{field}} = q\Delta V = (-1.602 \times 10^{-19}\text{ C})(+150\text{ V}) = -2.40 \times 10^{-17}\text{ J}.

  6. Evaluate potential energy change: ΔU=−Wfield=−(−2.40×10−17 J)=+2.40×10−17 J\Delta U = -W_{\text{field}} = -(-2.40 \times 10^{-17}\text{ J}) = +2.40 \times 10^{-17}\text{ J}, so the potential energy increases.

Final answer

(a) E⃗=−5.00×103 V/m ı^\vec{E} = -5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath}; (b) ΔV=+150 V\Delta V = +150\text{ V}; (c) Wfield=−2.40×10−17 JW_{\text{field}} = -2.40 \times 10^{-17}\text{ J}, electric potential energy increases by +2.40×10−17 J+2.40 \times 10^{-17}\text{ J}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing potential differences across boundaries that have opposite algebraic signs using explicit parentheses.

  • Verify each step's magnitude using an intuitive physical number-line check before moving on to work and energy calculations.

Lock it in

Similar question

01

Two parallel plates are located at x=0 mx = 0\text{ m} (V=+200 VV = +200\text{ V}) and x=0.050 mx = 0.050\text{ m} (V=−50 VV = -50\text{ V}). Determine the electric field vector E⃗\vec{E} between the plates.

Answer

Ex=−ΔVΔx=−−50−2000.050=+5000 V/mE_x = -\frac{\Delta V}{\Delta x} = -\frac{-50 - 200}{0.050} = +5000\text{ V/m}, so E⃗=+5.00×103 V/m ı^\vec{E} = +5.00 \times 10^3\text{ V/m}\text{ }\hat{\imath} (pointing toward lower potential at +x+x).

02

A uniform electric field is given by E⃗=−4.0×103 V/m ı^\vec{E} = -4.0 \times 10^3\text{ V/m}\text{ }\hat{\imath}. A proton (q=+1.602×10−19 Cq = +1.602 \times 10^{-19}\text{ C}) is moved from x=2.0 cmx = 2.0\text{ cm} to x=8.0 cmx = 8.0\text{ cm}. Calculate (a) the potential difference ΔV=V(8 cm)−V(2 cm)\Delta V = V(8\text{ cm}) - V(2\text{ cm}) and (b) the work done by the field WfieldW_{\text{field}}.

Answer

(a) ΔV=−ExΔx=−(−4.0×103 V/m)(0.060 m)=+240 V\Delta V = -E_x \Delta x = -(-4.0 \times 10^3\text{ V/m})(0.060\text{ m}) = +240\text{ V}. (b) Wfield=−qΔV=−(1.602×10−19 C)(+240 V)=−3.84×10−17 JW_{\text{field}} = -q \Delta V = -(1.602 \times 10^{-19}\text{ C})(+240\text{ V}) = -3.84 \times 10^{-17}\text{ J}.

03

Two vertical conducting plates are separated by 10.0 cm10.0\text{ cm}. Plate 1 is at x=0x = 0 with V1=−100 VV_1 = -100\text{ V}, and Plate 2 is at x=10.0 cmx = 10.0\text{ cm} with V2=+300 VV_2 = +300\text{ V}. An unknown particle with charge q=−2eq = -2e is released at x=2.5 cmx = 2.5\text{ cm} and travels to Plate 1. Find the change in potential ΔV\Delta V experienced by the particle and the change in its electric potential energy ΔU\Delta U.

Answer

Potential varies as V(x)=−100+4000x VV(x) = -100 + 4000x\text{ V}. At x=2.5 cm=0.025 mx = 2.5\text{ cm} = 0.025\text{ m}, Vinitial=0 VV_{\text{initial}} = 0\text{ V}. Final potential is V1=−100 VV_1 = -100\text{ V}. Thus ΔV=−100 V−0 V=−100 V\Delta V = -100\text{ V} - 0\text{ V} = -100\text{ V}. Then ΔU=qΔV=(−3.204×10−19 C)(−100 V)=+3.20×10−17 J\Delta U = q \Delta V = (-3.204 \times 10^{-19}\text{ C})(-100\text{ V}) = +3.20 \times 10^{-17}\text{ J} (potential energy increases).

Loading workspace…