Resources
A testing prototype vehicle moves along a straight track. The speed-time graph consists of three segments: uniform acceleration from rest to a peak speed over the first , travel at constant speed for , and uniform deceleration to a complete stop over the final . If the total distance covered by the vehicle during the entire interval is , calculate the value of .
Answer and steps
Final answer
Steps
Identify the shape of the graph
Method: Geometric Interpretation of a Speed-Time Graph
In a speed-time graph, the total distance traveled equals the area under the curve between the graph and the time axis.
The motion is divided into three consecutive phases along a straight track:
- Phase 1 (Acceleration): Starts from rest () and accelerates uniformly to over . The shape under this segment is a right-angled triangle.
- Phase 2 (Constant Speed): Continues at for (from to ). The shape under this segment is a rectangle.
- Phase 3 (Deceleration): Decelerates uniformly from to rest () over (from to ). The shape under this segment is a right-angled triangle.
Combined, the entire profile forms a single trapezoid with:
- Lower base (total time):
- Upper base (time at constant speed):
- Height (peak speed):
Express total distance in terms of
Using the formula for the area of a trapezoid:
Substitute the known base values:
Solve for
Equating this to the given total distance of :
(Alternative check by segment areas: , , , giving .)
Pitfall to Avoid: When using the trapezoid formula, ensure the upper base is strictly the duration spent at constant speed (), not the timestamp at which deceleration begins ().
Typical errors
01 The student treats the entire motion as occurring at a constant speed vmax, neglecting the acceleration and deceleration phases.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You applied the formula for constant-speed motion across the entire time interval. Because the vehicle accelerates from rest and later decelerates to a stop, its speed is changing during the first and the final , so distance must be calculated from the area under the speed-time profile (a trapezoid or sum of segments).
- Step 2Correct
You solved your equation algebraically correctly, but the resulting value represents the average speed over the whole trip, not the maximum speed .
WHAT YOU DID WELL
Compliments from Your TeacherYou accurately extracted the total distance () and total elapsed time () from the problem description.
You performed the algebraic division correctly to solve for the unknown variable.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated non-uniform motion as constant-speed motion by applying directly with , overlooking the triangular acceleration and deceleration phases on the speed-time graph.
REASONING PATH
Your ACEpath teacher’s suggested approach- Area Under Speed-Time Graph
Total distance traveled equals the total area enclosed between the speed-time graph and the time axis.
Sketch the graph and split it into geometric shapes (triangles and rectangles) or use the trapezoid area formula whenever speed changes linearly.
- Average Speed vs. Peak Speed
The ratio yields the average speed , which is strictly less than when the vehicle starts or stops from rest.
Check whether speed remains constant throughout; if not, express the area in terms of and solve for algebraically.
CORRECTED PATH
ACEpath Teacher's DemonstrationSketch the speed-time graph: it forms a trapezoid with height , bottom base , and top base .
Express the total distance as the trapezoid area: .
Equate the area to the total distance of : .
02 The student forgets the factor of 1/2 for the triangular acceleration and deceleration segments, treating each segment as a rectangle of height vmax.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the vehicle accelerates from rest and decelerates to rest, the velocity varies linearly with time. The distance covered in those phases corresponds to triangular areas on a speed-time graph, requiring a factor of .
- Step 2Correct
This simplification follows from your initial setup without the factors for the non-constant speed intervals.
- Step 3Correct
Carrying forward the correct coefficient yields .
WHAT YOU DID WELL
Compliments from Your TeacherYou partitioned the total motion into the three given time intervals.
You correctly equated the sum of the segment distances to the total distance of .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the constant-speed displacement formula across all segments, overlooking that uniform acceleration from or to rest yields an average velocity of (a triangular area under the speed-time curve).
REASONING PATH
Your ACEpath teacher’s suggested approach- Area Under Speed-Time Graph
Displacement equals the area under a speed-time curve: rectangles for constant speed, triangles for uniform acceleration/deceleration from or to rest.
Sketch the speed-time profile to visually confirm whether each segment forms a rectangle or a triangle .
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the area under the speed-time curve:
Combine like terms:
Substitute and solve:
03 The student incorrectly applies the factor of 1/2 to the middle constant-speed segment, treating all three segments as triangles.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
During the middle , the vehicle travels at a constant speed of . On a speed-time graph, a period of constant speed forms a rectangle of area , not a triangle.
- Step 2Correct
Your algebraic simplification and division were carried out correctly based on your equation, but the numerical result is affected by the missing area in the second term.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the geometric principle that distance equals the area under a speed-time graph.
You correctly identified the triangular areas under the uniform acceleration and deceleration segments.
You solved the resulting linear equation accurately according to your setup.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou applied the triangle area formula across all three motion intervals, forgetting that motion at a constant speed forms a horizontal line, which corresponds to a rectangular region rather than a triangular one.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Motion Type to Geometric Shape
On a graph, uniform acceleration/deceleration to or from rest produces a triangle (), while motion at constant speed produces a rectangle ().
Before writing formulas, sketch the graph or write down the geometric shape corresponding to each phase.
CORRECTED PATH
ACEpath Teacher's DemonstrationSum the areas of the two triangles and one rectangle:
Combine the coefficients of :
Divide to find the peak speed:
Lock it in
What physical quantity does the area under a speed-time graph represent?
Total distance traveled. For non-constant speed, calculate distance by finding the area under the curve rather than using .
Similar question
A subway train starts from rest, accelerates uniformly at for , cruises at constant speed for , and decelerates uniformly to rest in . Find the peak speed and the total distance traveled between stations.
Answer
; . Key steps: Peak speed is . The total time is , and the flat duration is . Distance is the trapezoid area: .
An elevator ascends from the ground floor to the top floor of a high-rise. It accelerates uniformly from rest for , travels at constant speed for some duration , and decelerates uniformly to a stop in . If the maximum speed is and the total height reached is , find the cruise duration and the total time of the trip.
Answer
; . Key steps: The acceleration and deceleration phases each cover , totaling . The constant speed segment covers . Thus, . Total time is .
A runner accelerates uniformly from rest to in and then maintains this speed for the remainder of a sprint. If the runner completes the sprint in , determine .
Answer
. Key steps: The speed-time graph has a triangular ramp from to and a rectangle from to (duration ). Total distance is . Setting gives .