Resources

A student looking through a thin lens at an upright object notes that the resulting image is magnified (∣m∣>1|m| > 1) and upright (m>0m > 0). (a) Based on geometric sign conventions, prove whether the lens must be converging (f>0f > 0) or diverging (f<0f < 0). (b) If the image appears upright and enlarged with a magnification of m=+2.50m = +2.50 when the object is placed 12.0 cm12.0\text{ cm} from the lens, calculate the focal length ff of the lens.

Answer and steps

Final answer

(a) The lens must be converging (f>0f > 0), because diverging lenses can only form upright images that are reduced (0<m<10 < m < 1 for real objects); (b) f=+20.0 cmf = +20.0\text{ cm}

Steps

Part (a): Determining the Type of Lens

  1. Relate magnification to object and image distances: For a real object placed in front of a thin lens, the object distance is positive: do>0d_o > 0 The lateral magnification mm is given by: m=−didom = -\frac{d_i}{d_o} Since the image is upright, m>0m > 0. Solving for the image distance did_i: di=−mdod_i = -m d_o Because both m>0m > 0 and do>0d_o > 0, the image distance must be negative (di<0d_i < 0), meaning the image is virtual and located on the same side of the lens as the object.
  2. Express focal length using the thin lens equation: The thin lens equation relates focal length ff, object distance dod_o, and image distance did_i: 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} Substitute di=−mdod_i = -m d_o: 1f=1do−1mdo=1do(1−1m)\frac{1}{f} = \frac{1}{d_o} - \frac{1}{m d_o} = \frac{1}{d_o}\left(1 - \frac{1}{m}\right)
  3. Determine the sign of ff: The problem specifies that the image is magnified, so m>1m > 1.

    • Since m>1m > 1, the term 1m<1\frac{1}{m} < 1, which makes (1−1m)>0\left(1 - \frac{1}{m}\right) > 0.
    • Since do>0d_o > 0, the right-hand side is strictly positive: 1f>0  ⟹  f>0\frac{1}{f} > 0 \implies f > 0

    A positive focal length corresponds to a converging lens (convex lens).

(Pitfall to avoid: A diverging lens can also form an upright, virtual image, but its magnification is always reduced, 0<m<10 < m < 1. It can never form an enlarged upright image of a real object.)


Part (b): Calculating the Focal Length

  1. Identify the given values:

    • Object distance: do=12.0 cmd_o = 12.0\text{ cm}
    • Magnification: m=+2.50m = +2.50
  2. Find the image distance did_i: di=−mdo=−(2.50)(12.0 cm)=−30.0 cmd_i = -m d_o = -(2.50)(12.0\text{ cm}) = -30.0\text{ cm}
  3. Compute the focal length ff: Substitute dod_o and did_i into the thin lens formula: 1f=112.0 cm+1−30.0 cm\frac{1}{f} = \frac{1}{12.0\text{ cm}} + \frac{1}{-30.0\text{ cm}} Find a common denominator (60.0 cm60.0\text{ cm}): 1f=560.0 cm−260.0 cm=360.0 cm=120.0 cm\frac{1}{f} = \frac{5}{60.0\text{ cm}} - \frac{2}{60.0\text{ cm}} = \frac{3}{60.0\text{ cm}} = \frac{1}{20.0\text{ cm}} f=+20.0 cmf = +20.0\text{ cm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the thin lens magnification formula, setting m = d_i/d_o, which leads to positive image distance and incorrect focal length.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m = dido\frac{d_i}{d_o}   ⟹  \implies Since \text{Since } m > 0  and \text{ and } d_o > 0, d_i > 0

    Correct

    m = -dido\frac{d_i}{d_o}   ⟹  \implies d_i = -m d_o < 0  for an upright image \text{ for an upright image } (m > 0)

    The standard thin-lens magnification formula includes an explicit negative sign: m=−didom = -\frac{d_i}{d_o}. Because the image is upright (m>0m > 0) and the object is real (do>0d_o > 0), the image distance must be negative (di<0d_i < 0), representing a virtual image.

  2. Step 2

    1f\frac{1}{f} = 1do\frac{1}{d_o} + 1di\frac{1}{d_i} = \frac{1}{d_o}$$\left(1 + \frac{1}{m}\right)   ⟹  \implies Since \text{Since } d_o > 0  and \text{ and } m > 1, 1f\frac{1}{f} > 0,  so \text{ so } f > 0$\text{ (converging lens)}$$

    Correct

    1f\frac{1}{f} = 1do\frac{1}{d_o} + 1−mdo\frac{1}{-m d_o} = \frac{1}{d_o}$$\left(1 - \frac{1}{m}\right) > 0   ⟹  \implies f > 0$$

    Although you arrived at the correct conclusion (f>0f > 0), substituting your positive image distance yielded the factor (1+1m)\left(1 + \frac{1}{m}\right) instead of (1−1m)\left(1 - \frac{1}{m}\right). With the correct sign, m>1m > 1 ensures that 1m<1\frac{1}{m} < 1, so 1−1m>01 - \frac{1}{m} > 0 and f>0f > 0.

  3. Step 3

    d_i = m ⋅\cdot d_o = 2.50 ⋅\cdot 12.0 cm\text{ cm} = 30.0 cm\text{ cm}

    Correct

    d_i = -m d_o = -(2.50)(12.0 cm\text{ cm}) = -30.0 cm\text{ cm}

    Because of the missing sign in the magnification relation, you found di=+30.0 cmd_i = +30.0\text{ cm} instead of di=−30.0 cmd_i = -30.0\text{ cm}.

  4. Step 4

    1f\frac{1}{f} = 112.0\frac{1}{12.0} + 130.0\frac{1}{30.0} = 760.0\frac{7}{60.0}   ⟹  \implies f = \frac{60.0}{7}$$\text{ cm} ≈\approx 8.57$\text{ cm}$$

    Correct

    1f\frac{1}{f} = 112.0 cm\frac{1}{12.0\text{ cm}} + 1−30.0 cm\frac{1}{-30.0\text{ cm}} = 5−260.0 cm\frac{5 - 2}{60.0\text{ cm}} = 360.0 cm\frac{3}{60.0\text{ cm}}   ⟹  \implies f = +20.0 cm\text{ cm}

    Your algebraic addition and fraction arithmetic were executed correctly, but substituting a positive image distance led to an incorrect focal length.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You carried out common-denominator fraction arithmetic accurately in part (b).

You correctly identified that a lens with f>0f > 0 is a converging lens.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in thin lens magnification formula

You dropped the negative sign in the lateral magnification definition, writing m=didom = \frac{d_i}{d_o} instead of m=−didom = -\frac{d_i}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the ratio of image-to-object heights with the ratio of image-to-object distances, overlooking that the Cartesian sign convention requires an explicit minus sign so that an upright virtual image (m>0m > 0) corresponds to a negative image distance (di<0d_i < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Magnification Sign Convention
  • For a thin lens, lateral magnification is defined as m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}.

  • Whenever an image is upright (m>0m > 0), immediately set di=−mdod_i = -m d_o and verify that did_i is negative.

Physical Reality of Upright Images
  • A single thin lens forming an upright image of a real object always produces a virtual image (di<0d_i < 0).

  • Check your image distance sign: if m>0m > 0, did_i must be negative before you substitute it into the thin-lens formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard magnification equation: m=−dido  ⟹  di=−mdom = -\frac{d_i}{d_o} \implies d_i = -m d_o.

  2. Substitute the given values m=+2.50m = +2.50 and do=12.0 cmd_o = 12.0\text{ cm}: di=−(2.50)(12.0 cm)=−30.0 cmd_i = -(2.50)(12.0\text{ cm}) = -30.0\text{ cm}.

  3. Substitute dod_o and did_i into the thin-lens equation: 1f=112.0 cm+1−30.0 cm=560.0 cm−260.0 cm=360.0 cm=120.0 cm\frac{1}{f} = \frac{1}{12.0\text{ cm}} + \frac{1}{-30.0\text{ cm}} = \frac{5}{60.0\text{ cm}} - \frac{2}{60.0\text{ cm}} = \frac{3}{60.0\text{ cm}} = \frac{1}{20.0\text{ cm}}.

  4. Solve for ff: f=+20.0 cmf = +20.0\text{ cm}.

Final answer

(a) Converging lens (f>0f > 0); (b) f=+20.0 cmf = +20.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the definition m=−didom = -\frac{d_i}{d_o} and always write it down before isolating variables.

  • Practice identifying virtual vs. real image signs: real images have di>0d_i > 0 and m<0m < 0 (inverted), while virtual images have di<0d_i < 0 and m>0m > 0 (upright).

  • Perform a sanity check on lens behavior: a converging lens acting as a magnifying glass requires the object inside the focal length (do<fd_o < f), which confirms f=20.0 cm>12.0 cmf = 20.0\text{ cm} > 12.0\text{ cm}.

OverviewACEpath Teacher's Diagnosis

02 The student assumes a magnified and upright image must be formed by a diverging lens, misinterpreting the sign of the focal length equation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Upright virtual images are formed behind the lens, which means the lens must be diverging   ⟹  \implies Therefore, f<0f < 0

    Correct

    1f=1do+1di=1do(1−1m)>0  ⟹  f>0\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{d_o}\left(1 - \frac{1}{m}\right) > 0 \implies f > 0 (converging lens)

    You assumed that all upright virtual images come from diverging lenses. However, a diverging lens only produces reduced upright images (0<m<10 < m < 1). When an upright image is magnified (m>1m > 1), the lens must be converging with the object placed inside the focal length (do<fd_o < f).

  2. Step 2

    di=−m∗do=−2.50∗12.0 cm=−30.0 cmd_i = -m * d_o = -2.50 * 12.0\text{ cm} = -30.0\text{ cm}

  3. Step 3

    1f=112.0−130.0=360.0=120.0\frac{1}{f} = \frac{1}{12.0} - \frac{1}{30.0} = \frac{3}{60.0} = \frac{1}{20.0}

  4. Step 4

    Since the lens is diverging, f=−20.0 cmf = -20.0\text{ cm}

    Correct

    f=+20.0 cmf = +20.0\text{ cm}

    Your algebra in the previous step yielded 1f=+120.0\frac{1}{f} = +\frac{1}{20.0}, which directly implies f=+20.0 cmf = +20.0\text{ cm}. You manually forced the sign to be negative due to the earlier misclassification in part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the lateral magnification relation m=−didom = -\frac{d_i}{d_o} to determine the image distance.

You accurately carried out the fraction arithmetic in the thin lens equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating virtual image magnification criteria between converging and diverging lenses

None; the arithmetic itself was fully accurate.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated all upright virtual images exclusively with diverging lenses, overlooking that converging lenses also produce upright virtual images when do<fd_o < f, and only converging lenses can make them magnified (m>1m > 1).

REASONING PATH
Your ACEpath teacher’s suggested approach
Image magnification for virtual images
  • For a real object (do>0d_o > 0), a diverging lens always yields 0<m<10 < m < 1 (upright and reduced). A converging lens yields m>1m > 1 when 0<do<f0 < d_o < f (upright and enlarged).

  • Check whether the image is enlarged (∣m∣>1|m| > 1) or reduced (∣m∣<1|m| < 1) before deciding between a converging and diverging lens.

Trusting algebraic signs
  • The thin lens formula 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} inherently determines the sign of ff.

  • Accept the sign that emerges naturally from the lens equation rather than overriding it based on an initial assumption.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the reciprocal of both sides directly: f=+20.0 cmf = +20.0\text{ cm}.

  2. Recognize that f>0f > 0 confirms the lens is converging.

Final answer

(a) Converging lens (f>0f > 0); (b) f=+20.0 cmf = +20.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review ray diagrams for a converging lens acting as a magnifying glass (do<fd_o < f).

  • Practice identifying lens type directly from the combination of the sign and magnitude of magnification mm.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the magnification relation as m = d_o / d_i instead of m = -d_i / d_o.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=−dodi  ⟹  di=−domm = -\frac{d_o}{d_i} \implies d_i = -\frac{d_o}{m}

    Correct

    m=−dido  ⟹  di=−mdom = -\frac{d_i}{d_o} \implies d_i = -m d_o

    Lateral magnification is defined as the ratio of image height to object height, which equals negative image distance over object distance: m=−didom = -\frac{d_i}{d_o}. You inverted this ratio by placing object distance in the numerator.

  2. Step 2

    1f=1do+1di=1do−mdo=1−mdo  ⟹  Since m>1 and do>0,1−m<0, so 1f<0 and f<0 (diverging lens)\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{d_o} - \frac{m}{d_o} = \frac{1-m}{d_o} \implies \text{Since } m > 1 \text{ and } d_o > 0, 1-m < 0, \text{ so } \frac{1}{f} < 0 \text{ and } f < 0 \text{ (diverging lens)}

    Correct

    1f=1do+1−mdo=1do(1−1m)>0  ⟹  f>0 (converging lens)\frac{1}{f} = \frac{1}{d_o} + \frac{1}{-m d_o} = \frac{1}{d_o}\left(1 - \frac{1}{m}\right) > 0 \implies f > 0 \text{ (converging lens)}

    Your reasoning with the signs was algebraically consistent with your line above, but because did_i was inverted, you obtained 1−mdo\frac{1-m}{d_o} instead of 1do(1−1m)\frac{1}{d_o}\left(1 - \frac{1}{m}\right). For m>1m > 1, 1−1m>01 - \frac{1}{m} > 0, proving the lens must be converging (f>0f > 0).

  3. Step 3

    di=−dom=−12.0 cm2.50=−4.80 cmd_i = \frac{-d_o}{m} = -\frac{12.0\text{ cm}}{2.50} = -4.80\text{ cm}

    Correct

    di=−mdo=−(2.50)(12.0 cm)=−30.0 cmd_i = -m d_o = -(2.50)(12.0\text{ cm}) = -30.0\text{ cm}

    This step carried over the inverted magnification relation from part (a). Using di=−mdod_i = -m d_o gives di=−30.0 cmd_i = -30.0\text{ cm}.

  4. Step 4

    1f=112.0−14.80=−1.5012.0=−18.0  ⟹  f=−8.0 cm\frac{1}{f} = \frac{1}{12.0} - \frac{1}{4.80} = -\frac{1.50}{12.0} = -\frac{1}{8.0} \implies f = -8.0\text{ cm}

    Correct

    1f=112.0 cm+1−30.0 cm=5−260.0 cm=120.0 cm  ⟹  f=+20.0 cm\frac{1}{f} = \frac{1}{12.0\text{ cm}} + \frac{1}{-30.0\text{ cm}} = \frac{5 - 2}{60.0\text{ cm}} = \frac{1}{20.0\text{ cm}} \implies f = +20.0\text{ cm}

    Your arithmetic with the thin lens equation was correct, but the incorrect value of did_i propagated here to give f=−8.0 cmf = -8.0\text{ cm} instead of +20.0 cm+20.0\text{ cm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and applied the thin lens formula 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You maintained proper algebraic rigor when finding common denominators and evaluating inequalities.

You correctly understood that an upright image (m>0m > 0) implies a negative image distance (di<0d_i < 0).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula inversion

You wrote m=−dodim = -\frac{d_o}{d_i} instead of m=−didom = -\frac{d_i}{d_o}, swapping the numerator and denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the order of image and object quantities in the magnification formula. Remember that magnification scales the image relative to the object, so image parameters (hi,dih_i, d_i) always belong in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Magnification Ratio Check
  • m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}

  • Always check that the image distance is on top: did_i in numerator, dod_o in denominator. A quick dimensional sanity check: if an image is enlarged (∣m∣>1|m| > 1), the image distance ∣di∣|d_i| must be greater than the object distance ∣do∣|d_o|.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the correct lateral magnification definition: m=−dido  ⟹  di=−mdom = -\frac{d_i}{d_o} \implies d_i = -m d_o.

  2. Substitute into the thin lens formula: 1f=1do−1mdo=1do(1−1m)\frac{1}{f} = \frac{1}{d_o} - \frac{1}{m d_o} = \frac{1}{d_o}\left(1 - \frac{1}{m}\right).

  3. Because m>1m > 1 and do>0d_o > 0, the term (1−1m)>0\left(1 - \frac{1}{m}\right) > 0, so 1f>0\frac{1}{f} > 0 and f>0f > 0 (converging lens).

  4. For part (b), calculate image distance: di=−(2.50)(12.0 cm)=−30.0 cmd_i = -(2.50)(12.0\text{ cm}) = -30.0\text{ cm}.

  5. Solve for focal length: 1f=112.0 cm−130.0 cm=360.0 cm=120.0 cm  ⟹  f=+20.0 cm\frac{1}{f} = \frac{1}{12.0\text{ cm}} - \frac{1}{30.0\text{ cm}} = \frac{3}{60.0\text{ cm}} = \frac{1}{20.0\text{ cm}} \implies f = +20.0\text{ cm}.

Final answer

(a) Converging lens (f>0f > 0); (b) f=+20.0 cmf = +20.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the mnemonic 'I over O': both lateral magnification ratios have image on top (hi/hoh_i / h_o and −di/do-d_i / d_o).

  • Perform a physical reality check: diverging lenses can only ever form reduced virtual images (0<m<10 < m < 1). An upright, magnified image always requires a converging lens acting as a magnifying glass.

Lock it in

Similar question

01

An object is placed 15.0 cm15.0\text{ cm} in front of a converging lens, producing an upright image with magnification m=+4.00m = +4.00. Calculate the focal length of the lens.

Answer

f=+20.0 cmf = +20.0\text{ cm}. Key steps: di=−mdo=−(4.00)(15.0 cm)=−60.0 cmd_i = -m d_o = -(4.00)(15.0\text{ cm}) = -60.0\text{ cm}. Then 1f=115.0+1−60.0=4−160.0=360.0=120.0  ⟹  f=+20.0 cm\frac{1}{f} = \frac{1}{15.0} + \frac{1}{-60.0} = \frac{4 - 1}{60.0} = \frac{3}{60.0} = \frac{1}{20.0}\implies f = +20.0\text{ cm}.

02

A stamp collector holds a converging lens with focal length f=+15.0 cmf = +15.0\text{ cm} in front of a stamp to view an upright image magnified by a factor of +3.00+3.00. What is the object distance dod_o?

Answer

do=10.0 cmd_o = 10.0\text{ cm}. Key steps: m=−dido=+3.00  ⟹  di=−3dom = -\frac{d_i}{d_o} = +3.00 \implies d_i = -3 d_o. Using 1f=1do+1di=1do−13do=23do\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{d_o} - \frac{1}{3 d_o} = \frac{2}{3 d_o}, we get 115.0=23do  ⟹  3do=30.0 cm  ⟹  do=10.0 cm\frac{1}{15.0} = \frac{2}{3 d_o} \implies 3 d_o = 30.0\text{ cm} \implies d_o = 10.0\text{ cm}.

03

A diverging lens has a focal length of f=−20.0 cmf = -20.0\text{ cm}. An object is placed 30.0 cm30.0\text{ cm} in front of the lens. Calculate the image distance did_i and the magnification mm. Is the image magnified or reduced?

Answer

di=−12.0 cmd_i = -12.0\text{ cm}, m=+0.400m = +0.400 (upright and reduced). Key steps: 1di=1f−1do=−120.0−130.0=−560.0=−112.0  ⟹  di=−12.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = -\frac{1}{20.0} - \frac{1}{30.0} = -\frac{5}{60.0} = -\frac{1}{12.0}\implies d_i = -12.0\text{ cm}. Then m=−dido=−−12.030.0=+0.400m = -\frac{d_i}{d_o} = -\frac{-12.0}{30.0} = +0.400.

Loading workspace…