Resources

In an undergraduate physics laboratory experiment, a nearly frictionless glider moves along a horizontal air track past two photogates connected to a digital timer. The glider is mounted with an opaque card of width w=2.50 cmw = 2.50\text{ cm}. Photogate 1 is positioned at x1=0.200 mx_1 = 0.200\text{ m} and Photogate 2 is at x2=1.400 mx_2 = 1.400\text{ m}. As the glider glides past in uniform linear motion, the digital timer records beam blocking times of Δt1=0.0500 s\Delta t_1 = 0.0500\text{ s} at Photogate 1 and Δt2=0.0500 s\Delta t_2 = 0.0500\text{ s} at Photogate 2, while the transit time of the glider from Photogate 1 to Photogate 2 is recorded as ΔT=2.400 s\Delta T = 2.400\text{ s}. Verify that the motion is uniform by calculating the instantaneous speeds v1v_1 and v2v_2 from the card widths, and compare these to the average transit speed vtransitv_{\text{transit}} between the two photogates.

Answer and steps

Final answer

v1=0.500 m/sv_1 = 0.500\text{ m/s}; v2=0.500 m/sv_2 = 0.500\text{ m/s}; vtransit=0.500 m/sv_{\text{transit}} = 0.500\text{ m/s}. Since v1=v2=vtransitv_1 = v_2 = v_{\text{transit}}, the motion is verified to be uniform linear motion.

Steps

01

Convert Units to SI

First, ensure all quantities are in standard SI units:

  • Width of the opaque card: w=2.50 cm=0.0250 mw = 2.50\text{ cm} = 0.0250\text{ m}

02

Calculate the Instantaneous Speeds at Each Photogate

A photogate measures the time interval Δt\Delta t during which an object of known width ww blocks its infrared beam. Because the width of the card is small, the average speed during the beam-blocking interval serves as a precise approximation of the instantaneous speed at that photogate: v=wΔtv = \frac{w}{\Delta t}

  • At Photogate 1: v1=wΔt1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{w}{\Delta t_1} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}
  • At Photogate 2: v2=wΔt2=0.0250 m0.0500 s=0.500 m/sv_2 = \frac{w}{\Delta t_2} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}

03

Calculate the Average Transit Speed Between the Photogates

The average transit speed across the separation distance Δx\Delta x is defined as the total displacement between the gates divided by the total travel time ΔT\Delta T:

  • Displacement between gates: Δx=x2−x1=1.400 m−0.200 m=1.200 m\Delta x = x_2 - x_1 = 1.400\text{ m} - 0.200\text{ m} = 1.200\text{ m}
  • Transit speed: vtransit=ΔxΔT=1.200 m2.400 s=0.500 m/sv_{\text{transit}} = \frac{\Delta x}{\Delta T} = \frac{1.200\text{ m}}{2.400\text{ s}} = 0.500\text{ m/s}

04

Verify Uniform Linear Motion

Uniform linear motion is characterized by motion along a straight line at a constant speed, meaning the instantaneous speed at every point equals the average speed over any interval: v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}

Because the glider's speed at Photogate 1 matches its speed at Photogate 2, and both match the average speed along the entire path between the gates, the glider's motion is confirmed to be uniform linear motion.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to convert the card width from centimeters to meters, resulting in instantaneous speeds that are 100 times too large.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v1=wΔt1=2.500.0500=50.0 m/sv_1 = \frac{w}{\Delta t_1} = \frac{2.50}{0.0500} = 50.0\text{ m/s}

    Correct

    v1=wΔt1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{w}{\Delta t_1} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}

    You correctly selected the photogate speed formula v=wΔtv = \frac{w}{\Delta t}, but you substituted w=2.50w = 2.50 directly without converting centimeters into meters (2.50 cm=0.0250 m2.50\text{ cm} = 0.0250\text{ m}). Dividing centimeters by seconds yields cm/s\text{cm/s}, so the value is 50.0 cm/s50.0\text{ cm/s}, which equals 0.500 m/s0.500\text{ m/s}.

  2. Step 2

    v2=wΔt2=2.500.0500=50.0 m/sv_2 = \frac{w}{\Delta t_2} = \frac{2.50}{0.0500} = 50.0\text{ m/s}

    Correct

    v2=wΔt2=0.0250 m0.0500 s=0.500 m/sv_2 = \frac{w}{\Delta t_2} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}

    You repeated the same unit omission at Photogate 2, substituting 2.50 cm2.50\text{ cm} rather than 0.0250 m0.0250\text{ m}.

  3. Step 3

    Δx=1.400−0.200=1.200 m  ⟹  vtransit=1.2002.400=0.500 m/s\Delta x = 1.400 - 0.200 = 1.200\text{ m} \implies v_{\text{transit}} = \frac{1.200}{2.400} = 0.500\text{ m/s}

  4. Step 4

    v1=v2=50.0 m/sv_1 = v_2 = 50.0\text{ m/s} does not equal vtransit=0.500 m/sv_{\text{transit}} = 0.500\text{ m/s}, so the motion is not uniform.

    Correct

    v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}, so the motion is uniform linear motion.

    Because your calculated instantaneous speeds were off by a factor of 100 due to the earlier unit conversion error, your final comparison and conclusion were affected.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the ratio of card width to gate blocking time to express instantaneous speed.

You correctly calculated the transit distance between the two photogates as 1.200 m1.200\text{ m}.

You correctly calculated the transit speed as 0.500 m/s0.500\text{ m/s}.

You understood the logical criterion that uniform motion requires instantaneous speed to equal average transit speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing SI unit conversion

Omitting the conversion factor 1 m=100 cm1\text{ m} = 100\text{ cm} when substituting w=2.50 cmw = 2.50\text{ cm}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted numeric values into kinematic formulas without checking whether all distance quantities shared consistent base SI units (meters) before computing.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Unit Consistency
  • Before dividing distance by time to obtain a velocity in m/s\text{m/s}, all distances must be converted to meters: d (m)=d (cm)×10−2d\,(\text{m}) = d\,(\text{cm}) \times 10^{-2}.

  • Always write down explicit units next to numbers in your substitutions: 0.0250 m0.0500 s=0.500 m/s\frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the card width to meters: w=2.50 cm=0.0250 mw = 2.50\text{ cm} = 0.0250\text{ m}.

  2. Calculate instantaneous speed at Photogate 1: v1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}.

  3. Calculate instantaneous speed at Photogate 2: v2=0.0250 m0.0500 s=0.500 m/sv_2 = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}.

  4. Compare the speeds: v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}.

Final answer

v1=0.500 m/sv_1 = 0.500\text{ m/s}, v2=0.500 m/sv_2 = 0.500\text{ m/s}, and vtransit=0.500 m/sv_{\text{transit}} = 0.500\text{ m/s}. Because all three values are equal, the motion is confirmed to be uniform linear motion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the units explicitly in every fraction before carrying out the division.

  • Perform a quick order-of-magnitude reality check: 50 m/s50\text{ m/s} is 180 km/h180\text{ km/h}, which is unrealistically fast for a tabletop air track glider.

OverviewACEpath Teacher's Diagnosis

02 The student uses the absolute coordinate x2 instead of the displacement between photogates Δx when calculating transit speed, leading to an incorrect transit speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    w=0.0250 m  ⟹  v1=0.0250/0.0500=0.500 m/s  ⟹  v2=0.0250/0.0500=0.500 m/sw = 0.0250\text{ m} \implies v_1 = 0.0250 / 0.0500 = 0.500\text{ m/s} \implies v_2 = 0.0250 / 0.0500 = 0.500\text{ m/s}

  2. Step 2

    vtransit=x2ΔT=1.4002.400=0.583 m/sv_{\text{transit}} = \frac{x_2}{\Delta T} = \frac{1.400}{2.400} = 0.583\text{ m/s}

    Correct

    vtransit=ΔxΔT=x2−x1ΔT=1.400 m−0.200 m2.400 s=1.200 m2.400 s=0.500 m/sv_{\text{transit}} = \frac{\Delta x}{\Delta T} = \frac{x_2 - x_1}{\Delta T} = \frac{1.400\text{ m} - 0.200\text{ m}}{2.400\text{ s}} = \frac{1.200\text{ m}}{2.400\text{ s}} = 0.500\text{ m/s}

    You divided the absolute position x2x_2 by ΔT\Delta T rather than the displacement between the two photogates, Δx=x2−x1\Delta x = x_2 - x_1.

  3. Step 3

    v1=v2=0.500 m/s but vtransit=0.583 m/s, so the speeds do not match.v_1 = v_2 = 0.500\text{ m/s}\text{ but }v_{\text{transit}} = 0.583\text{ m/s},\text{ so the speeds do not match.}

    Correct

    v1=v2=vtransit=0.500 m/s, so the motion is verified to be uniform linear motion.v_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s},\text{ so the motion is verified to be uniform linear motion.}

    Because the calculated transit speed was incorrect, your conclusion that the speeds do not match followed from the previous error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the card width from centimeters to meters.

You correctly used the photogate blocking formula v=wΔtv = \frac{w}{\Delta t} to find v1v_1 and v2v_2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Position vs. Displacement Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the position coordinate of the second photogate (x2x_2) as the distance traveled between the photogates, overlooking that the glider started the timed interval at x1=0.200 mx_1 = 0.200\text{ m} rather than at the origin (x=0x = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement Definition
  • Average velocity over an interval is displacement divided by elapsed time: vavg=ΔxΔt=xf−xiΔtv_{\text{avg}} = \frac{\Delta x}{\Delta t} = \frac{x_f - x_i}{\Delta t}.

  • Always subtract the initial coordinate from the final coordinate (x2−x1x_2 - x_1) whenever the motion does not start at coordinate zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the displacement between the two photogates: Δx=x2−x1=1.400 m−0.200 m=1.200 m\Delta x = x_2 - x_1 = 1.400\text{ m} - 0.200\text{ m} = 1.200\text{ m}.

  2. Compute the transit speed: vtransit=ΔxΔT=1.200 m2.400 s=0.500 m/sv_{\text{transit}} = \frac{\Delta x}{\Delta T} = \frac{1.200\text{ m}}{2.400\text{ s}} = 0.500\text{ m/s}.

  3. Compare speeds: v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}, confirming uniform linear motion.

Final answer

v1=0.500 m/sv_1 = 0.500\text{ m/s}, v2=0.500 m/sv_2 = 0.500\text{ m/s}, vtransit=0.500 m/sv_{\text{transit}} = 0.500\text{ m/s}. Since v1=v2=vtransitv_1 = v_2 = v_{\text{transit}}, the motion is verified to be uniform linear motion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Before dividing distance by time, sketch a quick number line and check whether the initial coordinate x1x_1 is at 00.

  • Practice identifying whether a given numerical value is a position coordinate xx or a displacement interval Δx\Delta x.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the speed formula by dividing time by distance rather than distance by time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    w=0.0250 mw = 0.0250\text{ m}

  2. Step 2

    v1=Δt1w=0.05000.0250=2.00 s/m  ⟹  v2=Δt2w=0.05000.0250=2.00 s/mv_1 = \frac{\Delta t_1}{w} = \frac{0.0500}{0.0250} = 2.00\text{ s/m} \implies v_2 = \frac{\Delta t_2}{w} = \frac{0.0500}{0.0250} = 2.00\text{ s/m}

    Correct

    v1=wΔt1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{w}{\Delta t_1} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}, v2=wΔt2=0.0250 m0.0500 s=0.500 m/sv_2 = \frac{w}{\Delta t_2} = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}

    You inverted the speed formula by dividing time by distance ( rac{\Delta t}{w}) rather than distance by time ( rac{w}{\Delta t}), yielding an answer in s/m\text{s/m} rather than m/s\text{m/s}.

  3. Step 3

    Δx=1.400−0.200=1.200 m\Delta x = 1.400 - 0.200 = 1.200\text{ m}

  4. Step 4

    vtransit=ΔTΔx=2.4001.200=2.00 s/mv_{\text{transit}} = \frac{\Delta T}{\Delta x} = \frac{2.400}{1.200} = 2.00\text{ s/m}

    Correct

    vtransit=ΔxΔT=1.200 m2.400 s=0.500 m/sv_{\text{transit}} = \frac{\Delta x}{\Delta T} = \frac{1.200\text{ m}}{2.400\text{ s}} = 0.500\text{ m/s}

    You inverted the average speed formula by dividing the transit time by the displacement instead of displacement by transit time.

  5. Step 5

    The calculated values equal \text{The calculated values equal } 2.00 s/m, verifying uniform motion.\text{ s/m, verifying uniform motion.}

    Correct

    v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}; since the speeds are equal, the motion is uniform.\text{since the speeds are equal, the motion is uniform.}

    Your conceptual reasoning that equal speed measurements verify uniform linear motion is sound, but your numerical values and units were inherited from the inverted speed formulas.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the card width from centimeters to meters.

You correctly computed the net distance between the two photogates.

You recognized that demonstrating v1=v2=vtransitv_1 = v_2 = v_{\text{transit}} verifies uniform linear motion.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Speed Formula

Dividing elapsed time by traveled distance instead of dividing distance by time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You swapped the numerator and denominator in the definition of speed (v=ΔxΔtv = \frac{\Delta x}{\Delta t}), calculating pace/slowness (time per unit distance, s/m\text{s/m}) rather than speed (distance per unit time, m/s\text{m/s}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional and Unit Check
  • Speed has dimensions of [Length]/[Time][\text{Length}]/[\text{Time}] and SI units of meters per second (m/s\text{m/s}).

  • Always verify that your formula places distance in the numerator and time in the denominator before computing.

Photogate Instantaneous Speed
  • A photogate measures instantaneous speed using the flag width ww blocking the beam over interval Δt\Delta t: v=wΔtv = \frac{w}{\Delta t}.

  • Divide the known card width ww by the beam interruption time Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the instantaneous speeds using v=wΔtv = \frac{w}{\Delta t}: v1=0.0250 m0.0500 s=0.500 m/sv_1 = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s} and v2=0.0250 m0.0500 s=0.500 m/sv_2 = \frac{0.0250\text{ m}}{0.0500\text{ s}} = 0.500\text{ m/s}.

  2. Compute the transit speed using vtransit=ΔxΔT=1.200 m2.400 s=0.500 m/sv_{\text{transit}} = \frac{\Delta x}{\Delta T} = \frac{1.200\text{ m}}{2.400\text{ s}} = 0.500\text{ m/s}.

  3. Compare the values: v1=v2=vtransit=0.500 m/sv_1 = v_2 = v_{\text{transit}} = 0.500\text{ m/s}, confirming uniform linear motion.

Final answer

v1=0.500 m/sv_1 = 0.500\text{ m/s}; v2=0.500 m/sv_2 = 0.500\text{ m/s}; vtransit=0.500 m/sv_{\text{transit}} = 0.500\text{ m/s}. Since v1=v2=vtransitv_1 = v_2 = v_{\text{transit}}, the motion is verified to be uniform linear motion.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the fundamental definition of speed as the rate of change of position, v=ΔxΔtv = \frac{\Delta x}{\Delta t}.

  • Practice checking units at every substitution step to ensure the result is in m/s\text{m/s} rather than s/m\text{s/m}.

  • Complete the practice problems below to reinforce calculating both gate speeds and transit speeds correctly.

Lock it in

Similar question

01

A glider on a level track carries a sail of width w=4.00 cmw = 4.00\text{ cm}. It passes through a photogate, blocking the beam for Δt=0.0800 s\Delta t = 0.0800\text{ s}. What is the glider's instantaneous speed in m/s\text{m/s}?

Answer

0.500 m/s0.500\text{ m/s}. Convert w=4.00 cm=0.0400 mw = 4.00\text{ cm} = 0.0400\text{ m}, then compute v=0.0400 m0.0800 s=0.500 m/sv = \frac{0.0400\text{ m}}{0.0800\text{ s}} = 0.500\text{ m/s}.

02

A laboratory cart passes two photogates spaced Δx=80.0 cm\Delta x = 80.0\text{ cm} apart in a transit time of ΔT=1.60 s\Delta T = 1.60\text{ s}. The cart carries a 2.00 cm2.00\text{ cm} vane that records Δt1=0.0400 s\Delta t_1 = 0.0400\text{ s} and Δt2=0.0400 s\Delta t_2 = 0.0400\text{ s}. Verify whether the cart travels with uniform linear motion by comparing the instantaneous speeds and the average transit speed in m/s\text{m/s}.

Answer

Yes, the motion is uniform. Convert all lengths to meters: w=0.0200 mw = 0.0200\text{ m} and Δx=0.800 m\Delta x = 0.800\text{ m}. Then v1=0.02000.0400=0.500 m/sv_1 = \frac{0.0200}{0.0400} = 0.500\text{ m/s}, v2=0.02000.0400=0.500 m/sv_2 = \frac{0.0200}{0.0400} = 0.500\text{ m/s}, and vtransit=0.8001.60=0.500 m/sv_{\text{transit}} = \frac{0.800}{1.60} = 0.500\text{ m/s}. Because v1=v2=vtransitv_1 = v_2 = v_{\text{transit}}, the motion is uniform.

03

A glider with a 3.00 cm3.00\text{ cm} flag travels down a slightly tilted track. It triggers Photogate 1 for Δt1=0.0600 s\Delta t_1 = 0.0600\text{ s} at x1=0.300 mx_1 = 0.300\text{ m} and Photogate 2 for Δt2=0.0400 s\Delta t_2 = 0.0400\text{ s} at x2=1.200 mx_2 = 1.200\text{ m}. The transit time between gates is ΔT=1.500 s\Delta T = 1.500\text{ s}. Determine v1v_1, v2v_2, and vtransitv_{\text{transit}} in m/s\text{m/s}, and state whether this motion is uniform linear motion.

Answer

v1=0.500 m/sv_1 = 0.500\text{ m/s}, v2=0.750 m/sv_2 = 0.750\text{ m/s}, and vtransit=0.600 m/sv_{\text{transit}} = 0.600\text{ m/s}. Because v1≠v2≠vtransitv_1 \neq v_2 \neq v_{\text{transit}}, the speed increases along the track and the motion is accelerated, not uniform linear motion.

Loading workspace…