Resources

A diver's underwater breathing tank with a rigid internal volume of 11.0 L11.0\text{ L} is stored at an ambient surface temperature of 27.0∘C27.0^\circ\text{C}. A Bourdon pressure gauge attached to the valve reads a gauge pressure of 200.0 psi200.0\text{ psi}. Taking local atmospheric pressure to be standard (1.00 atm=14.7 psi=101.325 kPa1.00\text{ atm} = 14.7\text{ psi} = 101.325\text{ kPa}), calculate the actual number of moles of gas present in the cylinder, strictly accounting for the distinction between gauge pressure and absolute pressure. Use R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

Answer and steps

Final answer

6.53 mol6.53\text{ mol}

Steps

01

Determine the Absolute Pressure (PP)

To find the number of moles of gas inside the cylinder, we apply the ideal gas law: PV=nRTP V = n R T A common pitfall in thermodynamics problems is using the gauge pressure directly. Pressure gauges measure the difference between internal pressure and the surrounding atmospheric pressure, whereas thermodynamic state equations require the absolute pressure.

The relationship between absolute pressure (PabsP_{\text{abs}}), gauge pressure (PgaugeP_{\text{gauge}}), and atmospheric pressure (PatmP_{\text{atm}}) is:

Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}

Given:

  • Pgauge=200.0 psiP_{\text{gauge}} = 200.0\text{ psi}
  • Patm=14.7 psiP_{\text{atm}} = 14.7\text{ psi}

Pabs=200.0 psi+14.7 psi=214.7 psiP_{\text{abs}} = 200.0\text{ psi} + 14.7\text{ psi} = 214.7\text{ psi}

Next, convert this absolute pressure into standard atmospheres (atm\text{atm}) using the conversion factor 1.00 atm=14.7 psi1.00\text{ atm} = 14.7\text{ psi}:

P=214.7 psi14.7 psi/atm≈14.61 atmP = \frac{214.7\text{ psi}}{14.7\text{ psi/atm}} \approx 14.61\text{ atm}


02

Convert Temperature to Kelvin (TT)

The absolute temperature must be expressed in Kelvin:

T=27.0+273.15=300.15 K≈300.2 KT = 27.0 + 273.15 = 300.15\text{ K} \approx 300.2\text{ K}


03

Calculate the Number of Moles (nn)

Rearranging the ideal gas equation for nn:

n=PVRTn = \frac{P V}{R T}

Substitute the given and calculated values:

  • P≈14.605 atmP \approx 14.605\text{ atm}
  • V=11.0 LV = 11.0\text{ L}
  • R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K})
  • T≈300.15 KT \approx 300.15\text{ K}

n=(14.605 atm)(11.0 L)(0.08206L⋅atmmol⋅K)(300.15 K)n = \frac{(14.605\text{ atm})(11.0\text{ L})}{\left(0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(300.15\text{ K})}

n=160.6624.63≈6.53 moln = \frac{160.66}{24.63} \approx 6.53\text{ mol}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly uses the gauge pressure in the ideal gas law without converting it to absolute pressure, resulting in an underestimate of 6.07 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=300.15 KT = 300.15\text{ K}

  2. Step 2

    P=200.014.7=13.61 atmP = \frac{200.0}{14.7} = 13.61\text{ atm}

    Correct

    P=200.0 psi+14.7 psi14.7 psi/atm=214.7 psi14.7 psi/atm≈14.61 atmP = \frac{200.0\text{ psi} + 14.7\text{ psi}}{14.7\text{ psi/atm}} = \frac{214.7\text{ psi}}{14.7\text{ psi/atm}} \approx 14.61\text{ atm}

    You converted the gauge reading directly into atmospheres without adding the ambient atmospheric pressure (14.7 psi14.7\text{ psi}) to obtain the absolute pressure required by the ideal gas law.

  3. Step 3

    n=(13.61∗11.0)(0.08206∗300.15)n = \frac{(13.61 * 11.0)}{(0.08206 * 300.15)}

    Correct

    n=(14.61 atm)(11.0 L)(0.08206L⋅atmmol⋅K)(300.15 K)n = \frac{(14.61\text{ atm})(11.0\text{ L})}{\left(0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(300.15\text{ K})}

    You substituted the correct volume, gas constant, and temperature into the ideal gas law, but your substitution carried forward the incorrect pressure value from the previous step.

  4. Step 4

    n=6.07 moln = 6.07\text{ mol}

    Correct

    n≈6.53 moln \approx 6.53\text{ mol}

    Your arithmetic evaluation was correct for your numbers, but the final answer is underestimated due to using gauge pressure rather than absolute pressure.

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately converted the temperature from degrees Celsius to Kelvin.

You chose the correct form of the ideal gas law rearranged for moles (n=PVRTn = \frac{PV}{RT}).

You used consistent units matching the ideal gas constant RR.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gauge vs. Absolute Pressure Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the gauge pressure reading as the total gas pressure, overlooking that pressure gauges measure pressure relative to the surrounding atmosphere rather than from a complete vacuum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute vs. Gauge Pressure
  • Thermodynamic state equations like PV=nRTPV = nRT strictly require absolute pressure (Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}).

  • Whenever a problem specifies a reading from a pressure gauge, always add local atmospheric pressure before inserting PP into thermodynamic formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the absolute pressure by adding atmospheric pressure: Pabs=200.0 psi+14.7 psi=214.7 psiP_{\text{abs}} = 200.0\text{ psi} + 14.7\text{ psi} = 214.7\text{ psi}.

  2. Convert to atmospheres: P=214.7 psi14.7 psi/atm≈14.605 atmP = \frac{214.7\text{ psi}}{14.7\text{ psi/atm}} \approx 14.605\text{ atm}.

  3. Recompute moles using the ideal gas law: n=(14.605 atm)(11.0 L)(0.08206L⋅atmmol⋅K)(300.15 K)≈6.53 moln = \frac{(14.605\text{ atm})(11.0\text{ L})}{\left(0.08206\frac{\text{L}\cdot\text{atm}}{\text{mol}\cdot\text{K}}\right)(300.15\text{ K})} \approx 6.53\text{ mol}.

Final answer

6.53 mol6.53\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between absolute pressure, gauge pressure, and atmospheric pressure.

  • Practice identifying whether pressure values given in word problems represent gauge readings or absolute values.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to convert the temperature from degrees Celsius to Kelvin, leading to an incorrect result of 72.5 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Pabs=200.0+14.7=214.7 psi  ⟹  P=214.714.7=14.61 atmP_{\text{abs}} = 200.0 + 14.7 = 214.7\text{ psi} \implies P = \frac{214.7}{14.7} = 14.61\text{ atm}

  2. Step 2

    T=27.0∘C  ⟹  n=14.61×11.00.08206×27.0T = 27.0^\circ\text{C} \implies n = \frac{14.61 \times 11.0}{0.08206 \times 27.0}

    Correct

    T=27.0+273.15=300.15 K  ⟹  n=(14.61 atm)(11.0 L)(0.08206 L⋅atm/(mol⋅K))(300.15 K)T = 27.0 + 273.15 = 300.15\text{ K} \implies n = \frac{(14.61\text{ atm})(11.0\text{ L})}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(300.15\text{ K})}

    Thermodynamic state equations require absolute temperature in Kelvin (T=T∘C+273.15T = T_{^\circ\text{C}} + 273.15). Using 27.027.0 directly underestimates the temperature by a factor of over 1111 and overestimates the number of moles.

  3. Step 3

    n=72.5 moln = 72.5\text{ mol}

    Correct

    n≈6.53 moln \approx 6.53\text{ mol}

    Your final calculation evaluated your expression correctly, but the result is incorrect due to the unconverted temperature in the denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly accounted for the difference between gauge pressure and absolute pressure by adding 14.7 psi14.7\text{ psi}.

You accurately converted the absolute pressure from psi\text{psi} to atm\text{atm}.

You correctly rearranged the ideal gas equation to solve for n=PVRTn = \frac{PV}{RT}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Conversion Error

You plugged in 27.0∘C27.0^\circ\text{C} directly into the ideal gas formula instead of converting it to absolute temperature in Kelvin.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the absolute temperature requirement in gas law calculations. Unlike temperature differences (ΔT\Delta T), absolute thermodynamic state values (TT) must always be measured from absolute zero on the Kelvin scale.

REASONING PATH
Your ACEpath teacher’s suggested approach
Absolute Temperature Requirement
  • The ideal gas law PV=nRTPV = nRT is derived assuming T=0T = 0 corresponds to zero thermal energy (absolute zero).

  • Always convert Celsius to Kelvin using T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15 before substituting into state equations.

Unit Matching with the Gas Constant
  • The units of R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}) explicitly include K\text{K} in the denominator.

  • Check that the temperature unit matches the Kelvin unit present in the gas constant RR.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the given temperature to Kelvin: T=27.0+273.15=300.15 KT = 27.0 + 273.15 = 300.15\text{ K}.

  2. Substitute the absolute pressure P=14.61 atmP = 14.61\text{ atm}, volume V=11.0 LV = 11.0\text{ L}, R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}), and T=300.15 KT = 300.15\text{ K} into n=PVRTn = \frac{PV}{RT}.

  3. Calculate n=(14.61)(11.0)(0.08206)(300.15)=160.7124.63≈6.53 moln = \frac{(14.61)(11.0)}{(0.08206)(300.15)} = \frac{160.71}{24.63} \approx 6.53\text{ mol}.

Final answer

6.53 mol6.53\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Form the habit of circling the temperature unit in gas law problems and immediately writing down its value in Kelvin.

  • Verify dimensional consistency by canceling units explicitly alongside numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts atmospheric pressure from gauge pressure instead of adding it, obtaining 5.63 mol.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T=27.0+273.15=300.15 KT = 27.0 + 273.15 = 300.15\text{ K}

  2. Step 2

    Pabs=200.0−14.7=185.3 psiP_{\text{abs}} = 200.0 - 14.7 = 185.3\text{ psi}

    Correct

    Pabs=Pgauge+Patm=200.0+14.7=214.7 psiP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}} = 200.0 + 14.7 = 214.7\text{ psi}

    A pressure gauge measures how much the internal pressure exceeds atmospheric pressure, so absolute pressure is found by adding atmospheric pressure (Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}), not subtracting it.

  3. Step 3

    P=185.314.7=12.61 atmP = \frac{185.3}{14.7} = 12.61\text{ atm}

    Correct

    P=214.714.7≈14.61 atmP = \frac{214.7}{14.7} \approx 14.61\text{ atm}

    Your conversion method from psi\text{psi} to atm\text{atm} is mathematically sound, but it carries forward the incorrect pressure value from step 2.

  4. Step 4

    n=12.61⋅11.00.08206⋅300.15⟹n=5.63 moln = \frac{12.61 \cdot 11.0}{0.08206 \cdot 300.15} \Longrightarrow n = 5.63\text{ mol}

    Correct

    n=(14.605)(11.0)(0.08206)(300.15)≈6.53 moln = \frac{(14.605)(11.0)}{(0.08206)(300.15)} \approx 6.53\text{ mol}

    Your algebraic substitution into n=PVRTn = \frac{PV}{RT} is correct, but the final numerical value is affected by the earlier pressure calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the temperature from degrees Celsius to Kelvin.

You selected and rearranged the ideal gas law PV=nRTPV = nRT correctly to solve for the number of moles.

You used the correct unit conversion factor between psi\text{psi} and atm\text{atm}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gauge vs. Absolute Pressure Confusion

You subtracted atmospheric pressure from gauge pressure instead of adding it.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the baseline of gauge pressure: gauge pressure represents the excess pressure above the ambient atmosphere, meaning Pgauge=Pabs−PatmP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}}, so the total thermodynamic pressure inside the tank must be Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Gauge vs. Absolute Pressure
  • Pabs=Pgauge+PatmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{atm}}

  • Always verify that the absolute pressure inside a pressurized cylinder is greater than both atmospheric pressure and the gauge reading.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find absolute pressure: Pabs=200.0 psi+14.7 psi=214.7 psiP_{\text{abs}} = 200.0\text{ psi} + 14.7\text{ psi} = 214.7\text{ psi}

  2. Convert to atmospheres: P=214.7 psi14.7 psi/atm≈14.605 atmP = \frac{214.7\text{ psi}}{14.7\text{ psi/atm}} \approx 14.605\text{ atm}

  3. Substitute into ideal gas law: n=(14.605 atm)(11.0 L)(0.08206 L⋅atm/(mol⋅K))(300.15 K)n = \frac{(14.605\text{ atm})(11.0\text{ L})}{(0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}))(300.15\text{ K})}

Final answer

6.53 mol6.53\text{ mol}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that a tire or cylinder gauge reads zero when exposed to open air, so absolute pressure is always gauge pressure plus atmospheric pressure.

  • Practice converting pressures between gauge, absolute, and various units (psi, atm, kPa) before applying the ideal gas law.

Lock it in

Similar question

01

A rigid 5.00 L5.00\text{ L} tank holds oxygen at 20.0∘C20.0^\circ\text{C}. A attached Bourdon gauge reads 44.1 psi44.1\text{ psi}. If atmospheric pressure is 14.7 psi14.7\text{ psi}, how many moles of oxygen are in the tank? Use R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

Answer

0.831 mol0.831\text{ mol}. First find absolute pressure: Pabs=44.1+14.7=58.8 psi=4.00 atmP_{\text{abs}} = 44.1 + 14.7 = 58.8\text{ psi} = 4.00\text{ atm}. Convert temperature: T=293.15 KT = 293.15\text{ K}. Then n=PVRT=(4.00)(5.00)(0.08206)(293.15)≈0.831 moln = \frac{PV}{RT} = \frac{(4.00)(5.00)}{(0.08206)(293.15)} \approx 0.831\text{ mol}.

02

A diver's 12.0 L12.0\text{ L} tank is submerged in fresh water where local absolute pressure is 2.50 atm2.50\text{ atm}. An internal pressure transducer inside the cylinder reports a differential (gauge) pressure of 18.5 atm18.5\text{ atm} above the surrounding ambient water. If the gas is at 15.0∘C15.0^\circ\text{C}, find the moles of gas present. Use R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

Answer

10.7 mol10.7\text{ mol}. Absolute pressure inside the tank is Pabs=Pgauge+Pambient=18.5+2.50=21.0 atmP_{\text{abs}} = P_{\text{gauge}} + P_{\text{ambient}} = 18.5 + 2.50 = 21.0\text{ atm}. Convert temperature: T=15.0+273.15=288.15 KT = 15.0 + 273.15 = 288.15\text{ K}. Calculate moles: n=(21.0)(12.0)(0.08206)(288.15)≈10.66 moln = \frac{(21.0)(12.0)}{(0.08206)(288.15)} \approx 10.66\text{ mol}.

03

A sealed, rigid 25.0 L25.0\text{ L} cylinder contains 5.00 mol5.00\text{ mol} of helium gas at 25.0∘C25.0^\circ\text{C}. What reading in psi will an external Bourdon pressure gauge attached to the cylinder display if the local atmospheric pressure is 101.3 kPa101.3\text{ kPa} (14.7 psi14.7\text{ psi})? Use R=0.08206 L⋅atm/(mol⋅K)R = 0.08206\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K}).

Answer

57.2 psi57.2\text{ psi}. First find absolute pressure: Pabs=nRTV=(5.00)(0.08206)(298.15)25.0=4.893 atm=71.93 psiP_{\text{abs}} = \frac{nRT}{V} = \frac{(5.00)(0.08206)(298.15)}{25.0} = 4.893\text{ atm} = 71.93\text{ psi}. Then subtract atmospheric pressure for gauge reading: Pgauge=Pabs−Patm=71.93−14.7=57.2 psiP_{\text{gauge}} = P_{\text{abs}} - P_{\text{atm}} = 71.93 - 14.7 = 57.2\text{ psi}.

Loading workspace…