Resources

An experimenter sets up two concentric, coplanar circular loops in the xyxy-plane centered at the origin. Loop 1 has a radius R1=5.00 cmR_1 = 5.00\text{ cm} and carries a known counterclockwise current of I1=4.20 AI_1 = 4.20\text{ A} (producing an axial magnetic field in the +z+z-direction). Loop 2 has a radius R2=12.0 cmR_2 = 12.0\text{ cm} and carries an unknown steady current I2I_2. A magnetic sensor placed at the common center measures a net magnetic field vector of B⃗net=−(1.80×10−5 T)k^\vec{B}_{\text{net}} = -(1.80\times 10^{-5}\text{ T})\hat{k}. Reverse-engineer the circuit parameters to determine: (a) the magnitude and direction (clockwise or counterclockwise when viewed from the +z+z-axis) of the current I2I_2 in Loop 2, and (b) the radius RzeroR_{\text{zero}} that Loop 2 would need to have (maintaining this current I2I_2) to create a magnetic field line null point where B⃗net=0⃗\vec{B}_{\text{net}} = \vec{0} at the center.

Answer and steps

Final answer

(a) I2=13.5 AI_2 = 13.5\text{ A} clockwise; (b) Rzero=16.1 cmR_{\text{zero}} = 16.1\text{ cm}

Steps

01

Magnetic Field Due to Loop 1

Part (a): Determine the Current I2I_2 in Loop 2

The magnetic field at the center of a flat circular loop carrying current II and of radius RR is given by the Biot-Savart law: B=μ0I2RB = \frac{\mu_0 I}{2R} where the permeability of free space is μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}.

For Loop 1:

  • Current I1=4.20 AI_1 = 4.20\text{ A}
  • Radius R1=5.00 cm=0.0500 mR_1 = 5.00\text{ cm} = 0.0500\text{ m}

Because the current flows counterclockwise in the xyxy-plane, by the right-hand rule, the magnetic field points along the +z+z-direction (+k^+\hat{k}): B1z=μ0I12R1=(4π×10−7 T⋅m/A)(4.20 A)2(0.0500 m)≈+5.278×10−5 TB_{1z} = \frac{\mu_0 I_1}{2 R_1} = \frac{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(4.20\text{ A})}{2(0.0500\text{ m})} \approx +5.278 \times 10^{-5}\text{ T}

02

Magnetic Field Due to Loop 2

By the principle of superposition, the net magnetic field at the center is the vector sum of the fields from both loops: B⃗net=B⃗1+B⃗2\vec{B}_{\text{net}} = \vec{B}_1 + \vec{B}_2

Given B⃗net=−(1.80×10−5 T)k^\vec{B}_{\text{net}} = -(1.80 \times 10^{-5}\text{ T})\hat{k}, we can solve for the zz-component of B⃗2\vec{B}_2: B2z=Bnet,z−B1z=−1.80×10−5 T−5.278×10−5 T=−7.078×10−5 TB_{2z} = B_{\text{net},z} - B_{1z} = -1.80 \times 10^{-5}\text{ T} - 5.278 \times 10^{-5}\text{ T} = -7.078 \times 10^{-5}\text{ T}

03

Current Magnitude and Direction of I2I_2

  • Direction: Since B2zB_{2z} is negative (pointing in the −k^-\hat{k} direction), applying the right-hand rule shows that the current I2I_2 must flow clockwise when viewed from the +z+z-axis.
  • Magnitude: Using the field formula for Loop 2 with radius R2=12.0 cm=0.120 mR_2 = 12.0\text{ cm} = 0.120\text{ m}: ∣B⃗2∣=μ0I22R2|\vec{B}_2| = \frac{\mu_0 I_2}{2 R_2} I2=2R2∣B⃗2∣μ0=2(0.120 m)(7.078×10−5 T)4π×10−7 T⋅m/A≈13.5 AI_2 = \frac{2 R_2 |\vec{B}_2|}{\mu_0} = \frac{2(0.120\text{ m})(7.078 \times 10^{-5}\text{ T})}{4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}} \approx 13.5\text{ A}

Part (b): Determine RzeroR_{\text{zero}} for a Magnetic Null Point

For the net magnetic field at the center to be zero (B⃗net=0⃗\vec{B}_{\text{net}} = \vec{0}), the field produced by Loop 2 must exactly cancel the field produced by Loop 1: B2=B1B_2 = B_1

Expressing both fields in terms of the current and radius: μ0I22Rzero=μ0I12R1\frac{\mu_0 I_2}{2 R_{\text{zero}}} = \frac{\mu_0 I_1}{2 R_1}

Canceling common factors: I2Rzero=I1R1\frac{I_2}{R_{\text{zero}}} = \frac{I_1}{R_1}

Solving for RzeroR_{\text{zero}}: Rzero=R1⋅I2I1=(5.00 cm)⋅13.52 A4.20 A≈16.1 cmR_{\text{zero}} = R_1 \cdot \frac{I_2}{I_1} = (5.00\text{ cm}) \cdot \frac{13.52\text{ A}}{4.20\text{ A}} \approx 16.1\text{ cm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misuses the straight-wire magnetic field formula μ₀I/(2πR) instead of the circular loop center formula μ₀I/(2R), resulting in an incorrect current magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    B1=μ0I12πR1=(4π×10−7)(4.20)2π×0.0500=1.68×10−5 TB_1 = \frac{\mu_0 I_1}{2\pi R_1} = \frac{(4\pi \times 10^{-7})(4.20)}{2\pi \times 0.0500} = 1.68 \times 10^{-5}\text{ T}

    Correct

    B1=μ0I12R1=(4π×10−7 T⋅m/A)(4.20 A)2(0.0500 m)=5.28×10−5 TB_1 = \frac{\mu_0 I_1}{2 R_1} = \frac{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(4.20\text{ A})}{2(0.0500\text{ m})} = 5.28 \times 10^{-5}\text{ T}

    You used the long straight-wire field equation with 2πR12\pi R_1 in the denominator. The magnetic field at the center of a circular loop of radius RR is B=μ0I2RB = \frac{\mu_0 I}{2R}, without the factor of π\pi.

  2. Step 2

    Bnet=B1+B2=−1.80×10−5 T  ⟹  B2=−1.80×10−5−1.68×10−5=−3.48×10−5 TB_{\text{net}} = B_1 + B_2 = -1.80 \times 10^{-5}\text{ T} \implies B_2 = -1.80 \times 10^{-5} - 1.68 \times 10^{-5} = -3.48 \times 10^{-5}\text{ T}

    Correct

    B2z=Bnet,z−B1z=−1.80×10−5 T−5.28×10−5 T=−7.08×10−5 TB_{2z} = B_{\text{net},z} - B_{1z} = -1.80 \times 10^{-5}\text{ T} - 5.28 \times 10^{-5}\text{ T} = -7.08 \times 10^{-5}\text{ T}

    Your superposition relation is conceptually correct, but substituting the incorrect value of B1B_1 led to an incorrect value for B2B_2.

  3. Step 3

    I2=∣B2∣(2πR2)μ0=(3.48×10−5)(2π×0.120)4π×10−7=4.18 A  ⟹  I2=4.18 A, clockwiseI_2 = \frac{|B_2|(2\pi R_2)}{\mu_0} = \frac{(3.48 \times 10^{-5})(2\pi \times 0.120)}{4\pi \times 10^{-7}} = 4.18\text{ A} \implies I_2 = 4.18\text{ A, clockwise}

    Correct

    I2=2R2∣B2z∣μ0=2(0.120 m)(7.08×10−5 T)4π×10−7 T⋅m/A≈13.5 AI_2 = \frac{2 R_2 |B_{2z}|}{\mu_0} = \frac{2(0.120\text{ m})(7.08 \times 10^{-5}\text{ T})}{4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}} \approx 13.5\text{ A} (clockwise)

    You correctly deduced that the current must flow clockwise because B2z<0B_{2z} < 0. However, your current magnitude was affected by the wrong value of B2B_2 and reusing the straight-wire expression.

  4. Step 4

    B1=B2  ⟹  I1R1=I2Rzero  ⟹  Rzero=R1(I2/I1)=(5.00)(4.18/4.20)=4.98 cmB_1 = B_2 \implies \frac{I_1}{R_1} = \frac{I_2}{R_{\text{zero}}} \implies R_{\text{zero}} = R_1 (I_2 / I_1) = (5.00)(4.18 / 4.20) = 4.98\text{ cm}

    Correct

    Rzero=R1(I2I1)=(5.00 cm)(13.52 A4.20 A)≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00\text{ cm}) \left(\frac{13.52\text{ A}}{4.20\text{ A}}\right) \approx 16.1\text{ cm}

    Your algebraic simplification I1R1=I2Rzero\frac{I_1}{R_1} = \frac{I_2}{R_{\text{zero}}} is valid, but substituting your earlier downstream value I2=4.18 AI_2 = 4.18\text{ A} yielded 4.98 cm4.98\text{ cm} instead of 16.1 cm16.1\text{ cm}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the principle of superposition B⃗net=B⃗1+B⃗2\vec{B}_{\text{net}} = \vec{B}_1 + \vec{B}_2 along the axial direction.

You correctly applied the right-hand rule to conclude that Loop 2 requires a clockwise current to produce a −k^-\hat{k} magnetic field.

You set up the proportional relationship Rzero=R1(I2/I1)R_{\text{zero}} = R_1 (I_2 / I_1) correctly for the field null condition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion: circular loop vs. straight wire

You wrote 2πR2\pi R instead of 2R2R in the denominator when calculating the on-axis central magnetic field of a circular loop.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating Ampère's law result for an infinite straight wire (B=μ0I2πrB = \frac{\mu_0 I}{2\pi r}) with the Biot-Savart integration at the center of a circular loop (B=μ0I2RB = \frac{\mu_0 I}{2R}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Circular Loop Center Formula
  • At the center of a single circular turn of radius RR, integrating dB⃗=μ0I4πdl⃗×r^R2d\vec{B} = \frac{\mu_0 I}{4\pi} \frac{d\vec{l} \times \hat{r}}{R^2} around the circumference 2πR2\pi R gives B=μ0I2RB = \frac{\mu_0 I}{2R}.

  • Check geometry before choosing a formula: use μ0I2πr\frac{\mu_0 I}{2\pi r} for long straight wires and μ0I2R\frac{\mu_0 I}{2R} for loop centers.

Field Direction vs. Current Sense
  • Curling right-hand fingers counterclockwise around +z+z gives +k^+\hat{k}; curling clockwise gives −k^-\hat{k}.

  • Always verify the sign of each component: a net field of −1.80×10−5 Tk^-1.80 \times 10^{-5}\text{ T}\hat{k} requires the clockwise loop's magnitude to strictly exceed the counterclockwise loop's field.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute B1z=+μ0I12R1=+(4π×10−7)(4.20)2(0.0500)=+5.278×10−5 TB_{1z} = +\frac{\mu_0 I_1}{2 R_1} = +\frac{(4\pi \times 10^{-7})(4.20)}{2(0.0500)} = +5.278 \times 10^{-5}\text{ T}.

  2. Find B2z=Bnet,z−B1z=−1.80×10−5 T−5.278×10−5 T=−7.078×10−5 TB_{2z} = B_{\text{net},z} - B_{1z} = -1.80 \times 10^{-5}\text{ T} - 5.278 \times 10^{-5}\text{ T} = -7.078 \times 10^{-5}\text{ T}.

  3. Calculate I2=2R2∣B2z∣μ0=2(0.120)(7.078×10−5)4π×10−7≈13.5 AI_2 = \frac{2 R_2 |B_{2z}|}{\mu_0} = \frac{2(0.120)(7.078 \times 10^{-5})}{4\pi \times 10^{-7}} \approx 13.5\text{ A} (clockwise).

  4. Solve for Rzero=R1(I2I1)=(5.00 cm)(13.52 A4.20 A)≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00\text{ cm})\left(\frac{13.52\text{ A}}{4.20\text{ A}}\right) \approx 16.1\text{ cm}.

Final answer

(a) I2=13.5 AI_2 = 13.5\text{ A} clockwise; (b) Rzero=16.1 cmR_{\text{zero}} = 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the distinction between μ0I2R\frac{\mu_0 I}{2R} (circular loop center) and μ0I2πr\frac{\mu_0 I}{2\pi r} (straight wire).

  • Recalculate part (a) using B=μ0I2RB = \frac{\mu_0 I}{2R} to verify that Loop 2 produces a stronger field than Loop 1 in the −k^-\hat{k} direction.

  • Re-evaluate RzeroR_{\text{zero}} using your updated I2I_2 to confirm that the canceling radius is larger than R2R_2.

OverviewACEpath Teacher's Diagnosis

02 The student forgets that the net field vector is in the -z direction, treating B_net as positive in the superposition equation and arriving at an incorrect current magnitude and counterclockwise direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    B1=μ0I12R1=(4π×10−7)(4.20)2×0.0500=5.28×10−5 TB_1 = \frac{\mu_0 I_1}{2R_1} = \frac{(4\pi \times 10^{-7})(4.20)}{2 \times 0.0500} = 5.28 \times 10^{-5}\text{ T}

  2. Step 2

    Bnet=B1+B2=1.80×10−5 T  ⟹  B2=1.80×10−5−5.28×10−5=−3.48×10−5 TB_{\text{net}} = B_1 + B_2 = 1.80 \times 10^{-5}\text{ T} \implies B_2 = 1.80 \times 10^{-5} - 5.28 \times 10^{-5} = -3.48 \times 10^{-5}\text{ T}

    Correct

    Bnet,z=B1z+B2z=−1.80×10−5 T  ⟹  B2z=−1.80×10−5−5.28×10−5=−7.08×10−5 TB_{\text{net},z} = B_{1z} + B_{2z} = -1.80 \times 10^{-5}\text{ T} \implies B_{2z} = -1.80 \times 10^{-5} - 5.28 \times 10^{-5} = -7.08 \times 10^{-5}\text{ T}

    The problem states that B⃗net=−(1.80×10−5 T)k^\vec{B}_{\text{net}} = -(1.80 \times 10^{-5}\text{ T})\hat{k}, meaning its zz-component is negative. By treating BnetB_{\text{net}} as positive +1.80×10−5 T+1.80 \times 10^{-5}\text{ T}, you underestimated the magnitude of the opposing field needed from Loop 2.

  3. Step 3

    I2=∣B2∣(2R2)μ0=(3.48×10−5)(2×0.120)4π×10−7=6.65 A  ⟹  I2=6.65 A, counterclockwiseI_2 = \frac{|B_2|(2R_2)}{\mu_0} = \frac{(3.48 \times 10^{-5})(2 \times 0.120)}{4\pi \times 10^{-7}} = 6.65\text{ A} \implies I_2 = 6.65\text{ A}\text{, counterclockwise}

    Correct

    I2=∣B2z∣(2R2)μ0=(7.08×10−5 T)(2×0.120 m)4π×10−7 T⋅m/A≈13.5 A, clockwiseI_2 = \frac{|B_{2z}|(2R_2)}{\mu_0} = \frac{(7.08 \times 10^{-5}\text{ T})(2 \times 0.120\text{ m})}{4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}} \approx 13.5\text{ A}\text{, clockwise}

    Your numerical magnitude was affected by the earlier sign error. In addition, because B2zB_{2z} points in the negative zz-direction, the right-hand rule requires the current in Loop 2 to circulate clockwise when viewed from the +z+z-axis, not counterclockwise.

  4. Step 4

    B1=B2  ⟹  Rzero=R1(I2/I1)=(5.00)(6.65/4.20)=7.92 cmB_1 = B_2 \implies R_{\text{zero}} = R_1 (I_2 / I_1) = (5.00)(6.65 / 4.20) = 7.92\text{ cm}

    Correct

    Rzero=R1(I2I1)=(5.00 cm)(13.5 A4.20 A)≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00\text{ cm})\left(\frac{13.5\text{ A}}{4.20\text{ A}}\right) \approx 16.1\text{ cm}

    Your proportional formula for the null-field radius is completely correct, but substituting the incorrect value of I2=6.65 AI_2 = 6.65\text{ A} propagated into an incorrect final radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula for the magnetic field at the center of a circular loop.

You correctly set up the principle of superposition for collinear axial fields.

You derived the correct proportional relationship Rzero=R1(I2/I1)R_{\text{zero}} = R_1 (I_2 / I_1) to locate the magnetic null point.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in vector component

You dropped the minus sign when writing down the component of B⃗net\vec{B}_{\text{net}}, writing 1.80×10−5 T1.80 \times 10^{-5}\text{ T} instead of −1.80×10−5 T-1.80 \times 10^{-5}\text{ T}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the vector superposition along the zz-axis using scalar magnitudes rather than signed vector components, which also led to a disconnect when assigning the circulation direction via the right-hand rule.

REASONING PATH
Your ACEpath teacher’s suggested approach
Project vectors onto oriented axes
  • When adding collinear vectors along the zz-axis, express each vector in terms of its signed scalar component: B⃗=Bzk^\vec{B} = B_z \hat{k}.

  • Always write out Bnet,z=B1z+B2zB_{\text{net},z} = B_{1z} + B_{2z} with explicit signs before rearranging to solve for an unknown component.

Relate axial field sign to current sense
  • By the right-hand rule for circular loops in the xyxy-plane, +z+z (+k^+\hat{k}) corresponds to counterclockwise current, and −z-z (−k^-\hat{k}) corresponds to clockwise current.

  • Check that the sign of your solved field component matches the physical direction of your current: a negative BzB_z must correspond to a clockwise circulation.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up vector superposition with the given negative component: Bnet,z=B1z+B2z=−1.80×10−5 TB_{\text{net},z} = B_{1z} + B_{2z} = -1.80 \times 10^{-5}\text{ T}.

  2. Solve for the component produced by Loop 2: B2z=−1.80×10−5 T−5.278×10−5 T=−7.078×10−5 TB_{2z} = -1.80 \times 10^{-5}\text{ T} - 5.278 \times 10^{-5}\text{ T} = -7.078 \times 10^{-5}\text{ T}.

  3. Apply the right-hand rule: since B2z<0B_{2z} < 0, the current I2I_2 must flow clockwise when viewed from the +z+z-axis.

  4. Calculate the magnitude of I2I_2: I2=2R2∣B2z∣μ0=2(0.120 m)(7.078×10−5 T)4π×10−7 T⋅m/A≈13.5 AI_2 = \frac{2 R_2 |B_{2z}|}{\mu_0} = \frac{2(0.120\text{ m})(7.078 \times 10^{-5}\text{ T})}{4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}} \approx 13.5\text{ A}.

  5. Recalculate RzeroR_{\text{zero}} for zero net field: Rzero=R1(I2I1)=(5.00 cm)(13.52 A4.20 A)≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00\text{ cm})\left(\frac{13.52\text{ A}}{4.20\text{ A}}\right) \approx 16.1\text{ cm}.

Final answer

(a) I2=13.5 AI_2 = 13.5\text{ A} clockwise; (b) Rzero=16.1 cmR_{\text{zero}} = 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector components for axial magnetic fields and practice tracking signs explicitly throughout superposition problems.

  • Practice matching the sign of BzB_z directly to loop circulation direction using the right-hand curl rule.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the vector nature of the magnetic field and adds the magnitudes directly, setting |B_net| = B₁ + B₂.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    B1=μ0I12R1=(4π×10−7)(4.20)2×0.0500=5.28×10−5 TB_1 = \frac{\mu_0 I_1}{2R_1} = \frac{(4\pi \times 10^{-7})(4.20)}{2 \times 0.0500} = 5.28 \times 10^{-5}\text{ T}

  2. Step 2

    Bnet=B1+B2  ⟹  1.80×10−5=5.28×10−5+B2  ⟹  B2=−3.48×10−5 TB_{\text{net}} = B_1 + B_2 \implies 1.80 \times 10^{-5} = 5.28 \times 10^{-5} + B_2 \implies B_2 = -3.48 \times 10^{-5}\text{ T}

    Correct

    Bnet,z=B1z+B2z  ⟹  −1.80×10−5 T=5.28×10−5 T+B2z  ⟹  B2z=−7.08×10−5 TB_{\text{net},z} = B_{1z} + B_{2z} \implies -1.80 \times 10^{-5}\text{ T} = 5.28 \times 10^{-5}\text{ T} + B_{2z} \implies B_{2z} = -7.08 \times 10^{-5}\text{ T}

    The problem states that B⃗net=−(1.80×10−5 T)k^\vec{B}_{\text{net}} = -(1.80 \times 10^{-5}\text{ T})\hat{k}, so its component along the zz-axis is negative (−1.80×10−5 T-1.80 \times 10^{-5}\text{ T}). You substituted a positive value, omitting the vector direction.

  3. Step 3

    Since the fields oppose, Loop 2 must produce field opposite to BnetB_{\text{net}}, so Loop 2 is counterclockwise   ⟹  I2=(3.48×10−5)(0.240)4π×10−7=6.65 A\implies I_2 = \frac{(3.48 \times 10^{-5})(0.240)}{4\pi \times 10^{-7}} = 6.65\text{ A}, counterclockwise

    Correct

    B2z=−7.08×10−5 T  ⟹  I2=2R2∣B2z∣μ0=13.5 AB_{2z} = -7.08 \times 10^{-5}\text{ T} \implies I_2 = \frac{2 R_2 |B_{2z}|}{\mu_0} = 13.5\text{ A}, clockwise

    Because B2zB_{2z} is negative (directed along −k^-\hat{k}), the right-hand rule requires current I2I_2 to flow clockwise. Evaluating with the correct magnitude yields I2≈13.5 AI_2 \approx 13.5\text{ A}.

  4. Step 4

    B1=B2  ⟹  Rzero=R1(I2I1)=(5.00)(6.654.20)=7.92 cmB_1 = B_2 \implies R_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00)\left(\frac{6.65}{4.20}\right) = 7.92\text{ cm}

    Correct

    Rzero=R1(I2I1)=(5.00 cm)(13.52 A4.20 A)≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = (5.00\text{ cm})\left(\frac{13.52\text{ A}}{4.20\text{ A}}\right) \approx 16.1\text{ cm}

    Your formula Rzero=R1(I2I1)R_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) is completely correct, but substituting your earlier value of I2=6.65 AI_2 = 6.65\text{ A} instead of 13.5 A13.5\text{ A} produced an incorrect radius.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and calculated the on-axis center field of a circular current loop using B=μ0I2RB = \frac{\mu_0 I}{2R}.

You correctly derived the algebraic scaling relationship Rzero=R1(I2I1)R_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) for the field cancellation condition.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dropped Vector Component Sign in Superposition

You wrote 1.80×10−5 T1.80 \times 10^{-5}\text{ T} instead of −1.80×10−5 T-1.80 \times 10^{-5}\text{ T} for Bnet,zB_{\text{net},z}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating B⃗net\vec{B}_{\text{net}} as a scalar magnitude rather than an oriented vector component along the k^\hat{k} axis caused you to add fields incorrectly and misinterpret the direction of B⃗2\vec{B}_2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Coordinate Projection
  • Before combining collinear vectors, assign signs to every term: along +k^+\hat{k} is positive, along −k^-\hat{k} is negative.

  • Always write out vector components explicitly: Bnet,z=B1z+B2zB_{\text{net},z} = B_{1z} + B_{2z}, checking that each value's sign matches its unit vector.

Right-Hand Rule for Loops
  • Curl the fingers of your right hand along the current; your thumb points along the resulting axial field vector.

  • A field pointing along −k^-\hat{k} corresponds to curling fingers in a clockwise direction when viewed from the +z+z-axis.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the 1D superposition along the k^\hat{k} axis: Bnet,z=B1z+B2zB_{\text{net},z} = B_{1z} + B_{2z}.

  2. Substitute Bnet,z=−1.80×10−5 TB_{\text{net},z} = -1.80 \times 10^{-5}\text{ T} and B1z=+5.28×10−5 TB_{1z} = +5.28 \times 10^{-5}\text{ T}: B2z=−1.80×10−5 T−5.28×10−5 T=−7.08×10−5 TB_{2z} = -1.80 \times 10^{-5}\text{ T} - 5.28 \times 10^{-5}\text{ T} = -7.08 \times 10^{-5}\text{ T}.

  3. By the right-hand rule, since B2z<0B_{2z} < 0 (pointing in −k^-\hat{k}), the current I2I_2 flows clockwise.

  4. Solve for current magnitude: I2=2R2∣B2z∣μ0=2(0.120 m)(7.078×10−5 T)4π×10−7 T⋅m/A≈13.5 AI_2 = \frac{2 R_2 |B_{2z}|}{\mu_0} = \frac{2(0.120\text{ m})(7.078 \times 10^{-5}\text{ T})}{4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}} \approx 13.5\text{ A}.

  5. Calculate RzeroR_{\text{zero}} using B1=B2B_1 = B_2: Rzero=R1(I2I1)=5.00 cm×13.52 A4.20 A≈16.1 cmR_{\text{zero}} = R_1 \left(\frac{I_2}{I_1}\right) = 5.00\text{ cm} \times \frac{13.52\text{ A}}{4.20\text{ A}} \approx 16.1\text{ cm}.

Final answer

(a) I2=13.5 AI_2 = 13.5\text{ A} clockwise; (b) Rzero=16.1 cmR_{\text{zero}} = 16.1\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write vector components with explicit signs (++ or −-) right after reading unit vectors such as −k^-\hat{k}.

  • Verify loop current directions using the right-hand curl rule: counterclockwise gives +k^+\hat{k}, clockwise gives −k^-\hat{k}.

Lock it in

Similar question

01

A circular coil of radius R=4.0 cmR = 4.0\text{ cm} consists of N=25N = 25 tightly wound turns and carries a counterclockwise current of 1.6 A1.6\text{ A}. Calculate the magnetic field magnitude at the center of the coil.

Answer

B=μ0NI2R=(4π×10−7)(25)(1.6)2(0.040)=2.0π×10−4 T≈6.28×10−4 TB = \frac{\mu_0 N I}{2R} = \frac{(4\pi \times 10^{-7})(25)(1.6)}{2(0.040)} = 2.0\pi \times 10^{-4}\text{ T} \approx 6.28 \times 10^{-4}\text{ T}.

02

Two concentric coplanar circular loops carry currents in opposite directions. The inner loop has radius R1=3.0 cmR_1 = 3.0\text{ cm} and carries a counterclockwise current I1=2.0 AI_1 = 2.0\text{ A}. The outer loop has radius R2=9.0 cmR_2 = 9.0\text{ cm}. What clockwise current I2I_2 must the outer loop carry so that the net magnetic field at their common center is zero?

Answer

For zero net field, B1=B2  ⟹  μ0I12R1=μ0I22R2  ⟹  I2=I1(R2R1)=2.0 A×(9.03.0)=6.0 AB_1 = B_2 \implies \frac{\mu_0 I_1}{2R_1} = \frac{\mu_0 I_2}{2R_2} \implies I_2 = I_1 \left(\frac{R_2}{R_1}\right) = 2.0\text{ A} \times \left(\frac{9.0}{3.0}\right) = 6.0\text{ A} (clockwise).

03

An inner loop with radius R1=6.0 cmR_1 = 6.0\text{ cm} carries a counterclockwise current of 3.0 A3.0\text{ A}. A concentric outer loop with radius R2=10.0 cmR_2 = 10.0\text{ cm} carries a clockwise current of 8.0 A8.0\text{ A}. Determine the magnitude and direction of the net magnetic field vector at the center.

Answer

B1z=+μ0(3.0)2(0.060)=+25μ0B_{1z} = +\frac{\mu_0 (3.0)}{2(0.060)} = +25\mu_0; B2z=−μ0(8.0)2(0.100)=−40μ0B_{2z} = -\frac{\mu_0 (8.0)}{2(0.100)} = -40\mu_0. The net field is Bnet,z=−15μ0=−15(4π×10−7)≈−1.88×10−5 TB_{\text{net},z} = -15\mu_0 = -15(4\pi \times 10^{-7}) \approx -1.88 \times 10^{-5}\text{ T} (pointing into the page, or −k^-\hat{k}).

Loading workspace…