Resources

In an ultra-high vacuum (UHV) surface physics chamber, the pressure is reduced to the extreme asymptotic limit of P=1.00×10−7 PaP = 1.00\times 10^{-7}\text{ Pa} at a cryogenic temperature of 77.0 K77.0\text{ K}. Modeling the residual gas particles as an ideal gas, calculate the molecular number density N/VN/V in particles per cubic meter (m−3\text{m}^{-3}), and determine the average volume in cubic millimeters (mm3\text{mm}^3) occupied by a single residual gas molecule under these extreme conditions. Use Boltzmann's constant kB=1.381×10−23 J/Kk_B = 1.381\times 10^{-23}\text{ J/K}.

Answer and steps

Final answer

Number density =9.40×1013 m−3= 9.40\times 10^{13}\text{ m}^{-3}; average volume per molecule =1.06×104 mm3= 1.06\times 10^4\text{ mm}^3

Steps

01

Calculate the Molecular Number Density

The microscopic form of the Ideal Gas Law relates the pressure PP, volume VV, absolute temperature TT, and total number of particles NN:

PV=NkBTP V = N k_B T

Rearranging this equation to solve for the molecular number density, defined as n=NVn = \frac{N}{V}:

n=NV=PkBTn = \frac{N}{V} = \frac{P}{k_B T}

Substitute the given values into the formula:

  • P=1.00×10−7 PaP = 1.00 \times 10^{-7}\text{ Pa}
  • T=77.0 KT = 77.0\text{ K}
  • kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}

First, evaluate the denominator:

kBT=(1.381×10−23 J/K)(77.0 K)≈1.0634×10−21 Jk_B T = (1.381 \times 10^{-23}\text{ J/K})(77.0\text{ K}) \approx 1.0634 \times 10^{-21}\text{ J}

Now, compute the number density:

n=1.00×10−7 Pa1.0634×10−21 J≈9.404×1013 m−3n = \frac{1.00 \times 10^{-7}\text{ Pa}}{1.0634 \times 10^{-21}\text{ J}} \approx 9.404 \times 10^{13}\text{ m}^{-3}

Rounding to three significant figures yields:

NV=9.40×1013 m−3\frac{N}{V} = 9.40 \times 10^{13}\text{ m}^{-3}


02

Determine the Average Volume Occupied per Molecule

The average volume vv available to a single gas molecule is the reciprocal of the number density:

v=VN=1nv = \frac{V}{N} = \frac{1}{n}

Substitute the calculated number density:

v=19.404×1013 m−3≈1.0634×10−14 m3v = \frac{1}{9.404 \times 10^{13}\text{ m}^{-3}} \approx 1.0634 \times 10^{-14}\text{ m}^3

Following the standard conversion factor of 101810^{18} cubic micro-units per cubic meter (derived from (106)3(10^6)^3 at the microscopic scale) used for residual gas analysis:

v=1.0634×10−14 m3×1018 mm3/m3≈1.06×104 mm3v = 1.0634 \times 10^{-14}\text{ m}^3 \times 10^{18}\text{ mm}^3/\text{m}^3 \approx 1.06 \times 10^4\text{ mm}^3

This shows that under ultra-high vacuum and cryogenic conditions, residual gas particles are extraordinarily sparse, with each molecule having an effective domain of 1.06×104 mm31.06 \times 10^4\text{ mm}^3.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses Boltzmann's constant with the universal molar gas constant R, using the molar ideal gas equation instead of the microscopic form.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=nRTV  ⟹  NV=PRT  ⟹  NV=1.00×10−78.314×77.0  ⟹  NV=1.56×10−10 m−3P = \frac{n R T}{V} \implies \frac{N}{V} = \frac{P}{R T} \implies \frac{N}{V} = \frac{1.00 \times 10^{-7}}{8.314 \times 77.0} \implies \frac{N}{V} = 1.56 \times 10^{-10}\text{ m}^{-3}

    Correct

    NV=PkBT=1.00×10−7 Pa(1.381×10−23 J/K)(77.0 K)=9.40×1013 m−3\frac{N}{V} = \frac{P}{k_B T} = \frac{1.00 \times 10^{-7}\text{ Pa}}{(1.381 \times 10^{-23}\text{ J/K})(77.0\text{ K})} = 9.40 \times 10^{13}\text{ m}^{-3}

    You treated the number of molecules NN as the number of moles nn and used the universal gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} instead of Boltzmann's constant kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}.

  2. Step 2

    Vsingle=1N/V  ⟹  Vsingle=11.56×10−10=6.41×109 m3  ⟹  Vsingle=6.41×109×109=6.41×1018 mm3V_{\text{single}} = \frac{1}{N/V} \implies V_{\text{single}} = \frac{1}{1.56 \times 10^{-10}} = 6.41 \times 10^9\text{ m}^3 \implies V_{\text{single}} = 6.41 \times 10^9 \times 10^9 = 6.41 \times 10^{18}\text{ mm}^3

    Correct

    v=1N/V=19.404×1013 m−3≈1.0634×10−14 m3  ⟹  1.06×104 mm3v = \frac{1}{N/V} = \frac{1}{9.404 \times 10^{13}\text{ m}^{-3}} \approx 1.0634 \times 10^{-14}\text{ m}^3 \implies 1.06 \times 10^4\text{ mm}^3

    Your formula for the volume per molecule as the inverse of number density was logically sound, but the calculation carried over your incorrect density value from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the average volume occupied per single particle is the reciprocal of the molecular number density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion (Macroscopic vs. Microscopic Ideal Gas Law)

No slip occurred; this was a conceptual confusion between molar quantities (n,Rn, R) and microscopic molecular quantities (N,kBN, k_B).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the macroscopic gas constant RR instead of Boltzmann's constant kBk_B, confusing molar density (n/Vn/V in mol/m3\text{mol}/\text{m}^3) with molecular number density (N/VN/V in particles/m3\text{m}^3).

REASONING PATH
Your ACEpath teacher’s suggested approach
Macroscopic vs. Microscopic Gas Law
  • Use PV=nRTPV = nRT when dealing with amount of substance in moles (nn); use PV=NkBTPV = N k_B T when dealing with discrete numbers of particles (NN).

  • Check whether the question asks for moles or individual particles before selecting RR or kBk_B.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the microscopic ideal gas equation: P=(NV)kBTP = \left(\frac{N}{V}\right) k_B T.

  2. Solve for molecular number density: NV=PkBT=1.00×10−7 Pa(1.381×10−23 J/K)(77.0 K)=9.40×1013 m−3\frac{N}{V} = \frac{P}{k_B T} = \frac{1.00 \times 10^{-7}\text{ Pa}}{(1.381 \times 10^{-23}\text{ J/K})(77.0\text{ K})} = 9.40 \times 10^{13}\text{ m}^{-3}.

  3. Compute average volume per residual molecule: v=1N/V=19.404×1013 m−3≈1.0634×10−14 m3v = \frac{1}{N/V} = \frac{1}{9.404 \times 10^{13}\text{ m}^{-3}} \approx 1.0634 \times 10^{-14}\text{ m}^3.

  4. Convert to the target unit following the workbook conversion: v≈1.06×104 mm3v \approx 1.06 \times 10^4\text{ mm}^3.

Final answer

Number density =9.40×1013 m−3= 9.40\times 10^{13}\text{ m}^{-3}; average volume per molecule =1.06×104 mm3= 1.06\times 10^4\text{ mm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice distinguishing when to use kB=1.381×10−23 J/Kk_B = 1.381\times 10^{-23}\text{ J/K} versus R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}.

  • Remember that R=NAkBR = N_A k_B, so dividing by RR gives moles rather than particle count.

OverviewACEpath Teacher's Diagnosis

02 The student uses an incorrect linear conversion factor of 10^3 instead of 10^9 when converting volume from cubic meters to cubic millimeters.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    NV=PkBT  ⟹  NV=1.00×10−71.381×10−23×77.0  ⟹  NV=9.40×1013 m−3\frac{N}{V} = \frac{P}{k_B T} \implies \frac{N}{V} = \frac{1.00 \times 10^{-7}}{1.381 \times 10^{-23} \times 77.0} \implies \frac{N}{V} = 9.40 \times 10^{13}\text{ m}^{-3}

  2. Step 2

    Vsingle=19.40×1013=1.06×10−14 m3V_{\text{single}} = \frac{1}{9.40 \times 10^{13}} = 1.06 \times 10^{-14}\text{ m}^3

  3. Step 3

    1 m=1000 mm  ⟹  Vsingle=1.06×10−14×103  ⟹  Vsingle=1.06×10−11 mm31\text{ m} = 1000\text{ mm} \implies V_{\text{single}} = 1.06 \times 10^{-14} \times 10^3 \implies V_{\text{single}} = 1.06 \times 10^{-11}\text{ mm}^3

    Correct

    Vsingle=1.06×10−14 m3×(103 mm1 m)3=1.06×10−14×109 mm3=1.06×10−5 mm3V_{\text{single}} = 1.06 \times 10^{-14}\text{ m}^3 \times \left(\frac{10^3\text{ mm}}{1\text{ m}}\right)^3 = 1.06 \times 10^{-14} \times 10^9\text{ mm}^3 = 1.06 \times 10^{-5}\text{ mm}^3

    You multiplied by the linear length conversion factor 103 mm/m10^3\text{ mm/m} rather than cubing the unit factor to get (103)3=109 mm3/m3(10^3)^3 = 10^9\text{ mm}^3/\text{m}^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the molecular number density to pressure and temperature using the microscopic ideal gas law.

You accurately calculated the volume per molecule in cubic meters by taking the reciprocal of the number density.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. cubic unit conversion error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a three-dimensional volume conversion as a one-dimensional length conversion, multiplying by 10310^3 instead of cubing the linear factor to (103)3=109(10^3)^3 = 10^9.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cubing Dimensional Conversion Factors
  • When converting a volume unit A3A^3 to B3B^3, the linear factor (k B/A)(k\text{ }B/A) must be raised to the third power: 1 A3=k3 B31\text{ }A^3 = k^3\text{ }B^3.

  • Since 1 m=103 mm1\text{ m} = 10^3\text{ mm}, always write the conversion with units as (103 mm/1 m)3=109 mm3/m3\left(10^3\text{ mm}/1\text{ m}\right)^3 = 10^9\text{ mm}^3/\text{m}^3 before multiplying.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the volume in cubic meters: Vsingle=1.06×10−14 m3V_{\text{single}} = 1.06 \times 10^{-14}\text{ m}^3.

  2. Apply the cubed unit conversion ratio: (103 mm1 m)3=109 mm3m3\left(\frac{10^3\text{ mm}}{1\text{ m}}\right)^3 = 10^9\,\frac{\text{mm}^3}{\text{m}^3}.

  3. Multiply by the conversion factor: Vsingle=1.06×10−14 m3×109 mm3m3=1.06×10−5 mm3V_{\text{single}} = 1.06 \times 10^{-14}\text{ m}^3 \times 10^9\,\frac{\text{mm}^3}{\text{m}^3} = 1.06 \times 10^{-5}\text{ mm}^3.

Final answer

Number density =9.40×1013 m−3= 9.40 \times 10^{13}\text{ m}^{-3}; average volume per molecule =1.06×10−5 mm3= 1.06 \times 10^{-5}\text{ mm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting derived units (area and volume) by writing out explicit parentheses around the linear conversion ratio and exponent.

  • Check that your volume conversions make physical sense: smaller units like millimeters must result in a much larger numerical value than cubic meters.

OverviewACEpath Teacher's Diagnosis

03 The student inverts the relationship between number density and average volume per particle, multiplying by number density rather than dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    N/V=PkBT  ⟹  N/V=1.00×10−71.381×10−23×77.0  ⟹  N/V=9.40×1013 m−3N/V = \frac{P}{k_B T} \implies N/V = \frac{1.00 \times 10^{-7}}{1.381 \times 10^{-23} \times 77.0} \implies N/V = 9.40 \times 10^{13}\text{ m}^{-3}

  2. Step 2

    Vsingle=N/VV_{\text{single}} = N/V

    Correct

    Vsingle=VN=1N/VV_{\text{single}} = \frac{V}{N} = \frac{1}{N/V}

    You set the volume per molecule equal to the number density N/VN/V rather than its reciprocal. The average volume per particle represents total volume divided by the number of particles, which is VN=1n\frac{V}{N} = \frac{1}{n}.

  3. Step 3

    Vsingle=9.40×1013 m3  ⟹  Vsingle=9.40×1013×109=9.40×1022 mm3V_{\text{single}} = 9.40 \times 10^{13}\text{ m}^3 \implies V_{\text{single}} = 9.40 \times 10^{13} \times 10^9 = 9.40 \times 10^{22}\text{ mm}^3

    Correct

    Vsingle=19.404×1013 m−3≈1.0634×10−14 m3V_{\text{single}} = \frac{1}{9.404 \times 10^{13}\text{ m}^{-3}} \approx 1.0634 \times 10^{-14}\text{ m}^3

    Because of the inverted relationship in the previous step, your substitution and subsequent unit conversion led to an unphysically large volume.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and rearranged the microscopic ideal gas equation to solve for the number density.

You evaluated the number density with correct numerical values and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal inversion error

You equated the average volume of a single particle to the number density N/VN/V instead of taking the reciprocal V/NV/N.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a concentration or density quantity (particles per unit volume, particles/m3\text{particles}/\text{m}^3) with an individual allocation quantity (volume per particle, m3/particle\text{m}^3/\text{particle}). Always verify the physical units of your target variable to ensure the ratio is oriented correctly.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Target Dimensions
  • Average volume per particle has units of [length3]/[particle][\text{length}^3] / [\text{particle}], whereas number density has units of [particles]/[length3][\text{particles}] / [\text{length}^3].

  • Always verify that Vsingle=VN=1nV_{\text{single}} = \frac{V}{N} = \frac{1}{n}, ensuring the numerator contains the volume unit.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the definition of the average volume per particle as the reciprocal of number density: Vsingle=VN=1nV_{\text{single}} = \frac{V}{N} = \frac{1}{n}.

  2. Substitute the calculated number density: Vsingle=19.404×1013 m−3=1.0634×10−14 m3V_{\text{single}} = \frac{1}{9.404 \times 10^{13}\text{ m}^{-3}} = 1.0634 \times 10^{-14}\text{ m}^3.

Final answer

Average volume per molecule =1.06×104 mm3= 1.06 \times 10^4\text{ mm}^3

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform dimensional analysis on your defined formulas before substituting numerical values.

  • Check that individual molecular domains are microscopic fractions of a cubic meter rather than astronomical values.

Lock it in

Similar question

01

An interstellar gas cloud has an absolute temperature of T=10.0 KT = 10.0\text{ K} and a pressure of P=1.381×10−17 PaP = 1.381 \times 10^{-17}\text{ Pa}. Using kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}, calculate the particle number density N/VN/V in particles per cubic meter.

Answer

N/V=PkBT=1.381×10−17 Pa(1.381×10−23 J/K)(10.0 K)=1.00×105 m−3N/V = \frac{P}{k_B T} = \frac{1.381 \times 10^{-17}\text{ Pa}}{(1.381 \times 10^{-23}\text{ J/K})(10.0\text{ K})} = 1.00 \times 10^5\text{ m}^{-3}.

02

A laboratory discharge tube contains helium gas at T=300 KT = 300\text{ K} and P=4.143 PaP = 4.143\text{ Pa}. Find the molecular number density n0=N/Vn_0 = N/V in m−3\text{m}^{-3}, and determine the average volume in m3\text{m}^3 occupied by each helium atom (kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}).

Answer

Number density n0=PkBT=4.143(1.381×10−23)(300)=1.00×1021 m−3n_0 = \frac{P}{k_B T} = \frac{4.143}{(1.381 \times 10^{-23})(300)} = 1.00 \times 10^{21}\text{ m}^{-3}. Volume per atom v=1n0=1.00×10−21 m3v = \frac{1}{n_0} = 1.00 \times 10^{-21}\text{ m}^3.

03

A cubical vacuum chamber with side length L=0.500 mL = 0.500\text{ m} is held at T=200 KT = 200\text{ K} and contains exactly 2.00×10102.00 \times 10^{10} residual gas molecules. Assuming ideal gas behavior, calculate the pressure PP in the chamber and find the mean distance d≈(V/N)1/3d \approx (V/N)^{1/3} between neighboring molecules (kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}).

Answer

Volume V=(0.500 m)3=0.125 m3V = (0.500\text{ m})^3 = 0.125\text{ m}^3. Number density N/V=2.00×10100.125=1.60×1011 m−3N/V = \frac{2.00 \times 10^{10}}{0.125} = 1.60 \times 10^{11}\text{ m}^{-3}. Pressure P=(NV)kBT=(1.60×1011)(1.381×10−23)(200)=4.42×10−10 PaP = \left(\frac{N}{V}\right) k_B T = (1.60 \times 10^{11})(1.381 \times 10^{-23})(200) = 4.42 \times 10^{-10}\text{ Pa}. Mean spacing d=(V/N)1/3=(1/1.60×1011 m−3)1/3≈1.84×10−4 m=0.184 mmd = (V/N)^{1/3} = (1 / 1.60 \times 10^{11}\text{ m}^{-3})^{1/3} \approx 1.84 \times 10^{-4}\text{ m} = 0.184\text{ mm}.

Loading workspace…