Resources

In an analytical physics laboratory experiment, a student determines the unknown capacitance CxC_x of an unmarked experimental capacitor using a standardized capacitive divider. A precision standard capacitor Cstd=10.00  μFC_{\text{std}} = 10.00\;\mu\text{F} is connected in series with CxC_x across an adjustable regulated DC power supply set to Vin=15.00 VV_{\text{in}} = 15.00\text{ V}. An electrometer with an input impedance of >1014 Ω> 10^{14}\,\Omega (drawing negligible current) measures the steady-state potential difference across CxC_x to be Vx=9.00 VV_x = 9.00\text{ V}. Determine the experimental capacitance CxC_x and calculate the total electric charge stored on the series pair.

Answer and steps

Final answer

Cx=6.67  μFC_x = 6.67\;\mu\text{F}, Q=60.0  μCQ = 60.0\;\mu\text{C}

Steps

01

Determine the Voltage Across the Standard Capacitor

In a series circuit, Kirchhoff's voltage law requires that the sum of the potential drops across each capacitor equals the total applied voltage from the DC power supply:

Vin=Vstd+VxV_{\text{in}} = V_{\text{std}} + V_x

Rearranging for the voltage across the precision standard capacitor, VstdV_{\text{std}}:

Vstd=Vin−Vx=15.00 V−9.00 V=6.00 VV_{\text{std}} = V_{\text{in}} - V_x = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V}


02

Calculate the Stored Charge

Because the two capacitors are connected in series, the same magnitude of electric charge QQ is displaced through the circuit and resides on each capacitor:

Q=Qstd=QxQ = Q_{\text{std}} = Q_x

Using the known capacitance Cstd=10.00  μFC_{\text{std}} = 10.00\;\mu\text{F} and its measured voltage drop:

Q=Cstd⋅Vstd=(10.00  μF)(6.00 V)=60.0  μCQ = C_{\text{std}} \cdot V_{\text{std}} = (10.00\;\mu\text{F})(6.00\text{ V}) = 60.0\;\mu\text{C}

Common Pitfall: For capacitors in series, the total charge drawn from the power supply is equal to the charge on each individual capacitor (Q=Qstd=QxQ = Q_{\text{std}} = Q_x), not their sum. Summing charges (Qtotal=Q1+Q2Q_{\text{total}} = Q_1 + Q_2) applies only to parallel configurations.


03

Calculate the Unknown Capacitance CxC_x

With the charge Qx=60.0  μCQ_x = 60.0\;\mu\text{C} and measured voltage Vx=9.00 VV_x = 9.00\text{ V}, apply the definition of capacitance:

Cx=QxVx=60.0  μC9.00 V=203  μF≈6.67  μFC_x = \frac{Q_x}{V_x} = \frac{60.0\;\mu\text{C}}{9.00\text{ V}} = \frac{20}{3}\;\mu\text{F} \approx 6.67\;\mu\text{F}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student assumes voltage divides in direct proportion to capacitance as with resistors, setting V_x / V_std = C_x / C_std instead of the inverse relationship.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vstd=15.00 V−9.00 V=6.00 VV_{\text{std}} = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V}

  2. Step 2

    CxCstd=VxVstd  ⟹  Cx=10.00  μF⋅(9.00 V6.00 V)=15.00  μF\frac{C_x}{C_{\text{std}}} = \frac{V_x}{V_{\text{std}}} \implies C_x = 10.00\;\mu\text{F} \cdot \left(\frac{9.00\text{ V}}{6.00\text{ V}}\right) = 15.00\;\mu\text{F}

    Correct

    CxCstd=VstdVx  ⟹  Cx=10.00  μF⋅(6.00 V9.00 V)=6.67  μF\frac{C_x}{C_{\text{std}}} = \frac{V_{\text{std}}}{V_x} \implies C_x = 10.00\;\mu\text{F} \cdot \left(\frac{6.00\text{ V}}{9.00\text{ V}}\right) = 6.67\;\mu\text{F}

    In a series circuit, capacitors carry equal charge (Q=CVQ = C V), which makes voltage inversely proportional to capacitance: CxCstd=VstdVx\frac{C_x}{C_{\text{std}}} = \frac{V_{\text{std}}}{V_x}.

  3. Step 3

    Q=Cstd⋅Vstd=10.00  μF⋅6.00 V=60.00  μC  ⟹  Qtotal=60.00  μCQ = C_{\text{std}} \cdot V_{\text{std}} = 10.00\;\mu\text{F} \cdot 6.00\text{ V} = 60.00\;\mu\text{C} \implies Q_{\text{total}} = 60.00\;\mu\text{C}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Kirchhoff's voltage law to find the remaining voltage across the standard capacitor.

You correctly identified that the total charge on a series combination equals the charge on each individual capacitor.

You correctly calculated the numerical charge stored on the standard capacitor as 60.00  μC60.00\;\mu\text{C}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Direct rather than inverse capacitive voltage division

No, this is a conceptual misunderstanding regarding the voltage divider relationship for capacitors compared to resistors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the capacitive voltage divider as directly proportional (V∝CV \propto C) like a resistive voltage divider (V∝RV \propto R), forgetting that because series charge QQ is constant, potential difference is inversely proportional to capacitance (V=QCV = \frac{Q}{C}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverse Voltage Division
  • For two capacitors in series carrying identical charge QQ, V1V2=C2C1\frac{V_1}{V_2} = \frac{C_2}{C_1}.

  • Always verify that the smaller capacitor takes the larger fraction of the total voltage drop.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the constant-charge relation for capacitors in series: Qx=Qstd=60.0  μCQ_x = Q_{\text{std}} = 60.0\;\mu\text{C}.

  2. Apply the definition of capacitance to find CxC_x: Cx=QxVx=60.0  μC9.00 V=203  μF≈6.67  μFC_x = \frac{Q_x}{V_x} = \frac{60.0\;\mu\text{C}}{9.00\text{ V}} = \frac{20}{3}\;\mu\text{F} \approx 6.67\;\mu\text{F}.

Final answer

Cx=6.67  μF,  Q=60.0  μCC_x = 6.67\;\mu\text{F},\; Q = 60.0\;\mu\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that because Q=CVQ = CV is constant in series, voltage is inversely proportional to capacitance: smaller capacitors hold higher voltages.

  • When solving for an unknown series component, calculate QQ first and use C=QVC = \frac{Q}{V} directly to avoid ratio inversion errors.

OverviewACEpath Teacher's Diagnosis

02 The student correctly finds the charge on a single capacitor but adds the individual capacitor charges together to find the total stored charge on the series pair.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Vstd=15.00 V−9.00 V=6.00 VV_{\text{std}} = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V}

  2. Step 2

    Q=Cstd∗Vstd=10.00  μF∗6.00 V=60.00  μCQ = C_{\text{std}} * V_{\text{std}} = 10.00\;\mu\text{F} * 6.00\text{ V} = 60.00\;\mu\text{C}

  3. Step 3

    Cx=QVx=60.00  μC9.00 V=6.67  μFC_x = \frac{Q}{V_x} = \frac{60.00\;\mu\text{C}}{9.00\text{ V}} = 6.67\;\mu\text{F}

  4. Step 4

    Qtotal=Qstd+Qx  ⟹  Qtotal=60.00  μC+60.00  μC=120.00  μCQ_{\text{total}} = Q_{\text{std}} + Q_x \implies Q_{\text{total}} = 60.00\;\mu\text{C} + 60.00\;\mu\text{C} = 120.00\;\mu\text{C}

    Correct

    Qtotal=Qstd=Qx=60.0  μCQ_{\text{total}} = Q_{\text{std}} = Q_x = 60.0\;\mu\text{C}

    You added the individual capacitor charges together. For capacitors connected in series, the total charge supplied by the source and stored by the equivalent combination equals the charge on each individual capacitor, not their sum.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used loop voltage division to find Vstd=6.00 VV_{\text{std}} = 6.00\text{ V}.

You correctly applied Q=CVQ = C V to find the charge on the standard capacitor.

You correctly solved for the unknown capacitance Cx≈6.67  μFC_x \approx 6.67\;\mu\text{F}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Summing charges in a series combination

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied the parallel charge rule (Qtotal=Q1+Q2Q_{\text{total}} = Q_1 + Q_2) to a series circuit. When capacitors are in series, charge is displaced by induction through a single path, meaning the battery separates an amount of charge QQ that resides on each capacitor in the chain, giving Qtotal=Qeq=QQ_{\text{total}} = Q_{\text{eq}} = Q.

REASONING PATH
Your ACEpath teacher’s suggested approach
Series vs. Parallel Charge Distribution
  • For capacitors in series, Qtotal=Q1=Q2=⋯=QnQ_{\text{total}} = Q_1 = Q_2 = \dots = Q_n. For capacitors in parallel, Qtotal=Q1+Q2+⋯+QnQ_{\text{total}} = Q_1 + Q_2 + \dots + Q_n.

  • Always identify the circuit topology before combining charges: if there is only one continuous path for charge displacement, the total stored charge equals the charge on any single component.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For two capacitors connected in series across a voltage source, the charge displaced from the source plates is Q=60.0  μCQ = 60.0\;\mu\text{C}.

  2. The internal plates between CstdC_{\text{std}} and CxC_x charge by electrostatic induction, so no additional net charge is drawn from the supply.

  3. Therefore, the total charge stored on the series combination is Qtotal=Q=60.0  μCQ_{\text{total}} = Q = 60.0\;\mu\text{C}.

Final answer

Cx=6.67  μFC_x = 6.67\;\mu\text{F}, Qtotal=60.0  μCQ_{\text{total}} = 60.0\;\mu\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review charge separation by electrostatic induction on the isolated central node of a series capacitive branch.

  • Practice identifying whether a question asks for the charge displaced by the supply (QeqQ_{\text{eq}}) or the total energy/charge across parallel branches.

OverviewACEpath Teacher's Diagnosis

03 The student misidentifies the voltage across the standard capacitor by using the full input supply voltage V_in rather than the drop V_std = V_in - V_x.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Q=Cstd⋅Vin=10.00  μF⋅15.00 V=150.00  μCQ = C_{\text{std}} \cdot V_{\text{in}} = 10.00\;\mu\text{F} \cdot 15.00\text{ V} = 150.00\;\mu\text{C}

    Correct

    Vstd=Vin−Vx=15.00 V−9.00 V=6.00 V  ⟹  Q=Cstd⋅Vstd=(10.00  μF)(6.00 V)=60.0  μCV_{\text{std}} = V_{\text{in}} - V_x = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V} \implies Q = C_{\text{std}} \cdot V_{\text{std}} = (10.00\;\mu\text{F})(6.00\text{ V}) = 60.0\;\mu\text{C}

    Because CstdC_{\text{std}} and CxC_x are connected in series across 15.00 V15.00\text{ V}, the total supply voltage divides between them. The voltage drop across CstdC_{\text{std}} is only Vstd=15.00 V−9.00 V=6.00 VV_{\text{std}} = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V}, not the full 15.00 V15.00\text{ V}.

  2. Step 2

    Cx=QVx=150.00  μC9.00 V=16.67  μFC_x = \frac{Q}{V_x} = \frac{150.00\;\mu\text{C}}{9.00\text{ V}} = 16.67\;\mu\text{F}

    Correct

    Cx=QVx=60.0  μC9.00 V≈6.67  μFC_x = \frac{Q}{V_x} = \frac{60.0\;\mu\text{C}}{9.00\text{ V}} \approx 6.67\;\mu\text{F}

    Your formula Cx=QVxC_x = \frac{Q}{V_x} is correct, but your calculation inherited the incorrect value of QQ from Step 1.

  3. Step 3

    Qtotal=Q=150.00  μCQ_{\text{total}} = Q = 150.00\;\mu\text{C}

    Correct

    Qtotal=Q=60.0  μCQ_{\text{total}} = Q = 60.0\;\mu\text{C}

    Your reasoning that the total charge stored by a series pair equals the charge on each capacitor is correct, but the numerical value is affected by Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that capacitors connected in series share the same magnitude of electric charge (Qtotal=Qstd=QxQ_{\text{total}} = Q_{\text{std}} = Q_x).

You used the fundamental relation C=QVC = \frac{Q}{V} correctly to find the unknown capacitance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Voltage Allocation in Series Components

You substituted the total supply voltage VinV_{\text{in}} directly into Q=CstdVQ = C_{\text{std}} V instead of the voltage drop specifically across the standard capacitor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total voltage across a series combination with the individual potential drop across one component in that series string.

REASONING PATH
Your ACEpath teacher’s suggested approach
Apply Kirchhoff's Voltage Law to Series Capacitors
  • In a series circuit, voltages add: Vtotal=V1+V2+⋯+VnV_{\text{total}} = V_1 + V_2 + \dots + V_n. An individual component receives only its fraction of the supply voltage.

  • Before computing charge from Q=CiViQ = C_i V_i, always find the individual voltage drop Vi=Vtotal−∑j≠iVjV_i = V_{\text{total}} - \sum_{j \neq i} V_j across that specific capacitor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the voltage drop across the standard capacitor: Vstd=Vin−Vx=15.00 V−9.00 V=6.00 VV_{\text{std}} = V_{\text{in}} - V_x = 15.00\text{ V} - 9.00\text{ V} = 6.00\text{ V}.

  2. Calculate the series charge: Q=Cstd⋅Vstd=(10.00  μF)(6.00 V)=60.0  μCQ = C_{\text{std}} \cdot V_{\text{std}} = (10.00\;\mu\text{F})(6.00\text{ V}) = 60.0\;\mu\text{C}.

  3. Calculate the unknown capacitance: Cx=QVx=60.0  μC9.00 V=203  μF≈6.67  μFC_x = \frac{Q}{V_x} = \frac{60.0\;\mu\text{C}}{9.00\text{ V}} = \frac{20}{3}\;\mu\text{F} \approx 6.67\;\mu\text{F}.

Final answer

Cx=6.67  μFC_x = 6.67\;\mu\text{F}, Q=60.0  μCQ = 60.0\;\mu\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing an explicit loop diagram and labeling VinV_{\text{in}}, V1V_1, and V2V_2 before writing any equations.

  • Review the capacitive voltage divider formula: V1=Vin(C2C1+C2)V_1 = V_{\text{in}} \left(\frac{C_2}{C_1 + C_2}\right) to see how voltage distributes inversely with capacitance.

Lock it in

Similar question

01

Two capacitors, C1=4.0  μFC_1 = 4.0\;\mu\text{F} and C2=12.0  μFC_2 = 12.0\;\mu\text{F}, are connected in series across a 24.0 V24.0\text{ V} DC source. Find the voltage across C1C_1 and the charge stored on each capacitor.

Answer

V1=18.0 V,  Q=72.0  μCV_1 = 18.0\text{ V},\; Q = 72.0\;\mu\text{C}. The equivalent capacitance is Ceq=4.0×12.04.0+12.0=3.0  μFC_{\text{eq}} = \frac{4.0 \times 12.0}{4.0 + 12.0} = 3.0\;\mu\text{F}. Total charge is Q=CeqV=3.0  μF×24.0 V=72.0  μCQ = C_{\text{eq}} V = 3.0\;\mu\text{F} \times 24.0\text{ V} = 72.0\;\mu\text{C}. Then V1=QC1=72.0  μC4.0  μF=18.0 VV_1 = \frac{Q}{C_1} = \frac{72.0\;\mu\text{C}}{4.0\;\mu\text{F}} = 18.0\text{ V}.

02

In a series capacitive circuit across Vtotal=30.0 VV_{\text{total}} = 30.0\text{ V}, capacitor CAC_A drops 20.0 V20.0\text{ V} while an unknown capacitor CB=5.00  μFC_B = 5.00\;\mu\text{F} drops the remaining voltage. Determine the capacitance of CAC_A.

Answer

CA=2.50  μFC_A = 2.50\;\mu\text{F}. The voltage across CBC_B is VB=30.0 V−20.0 V=10.0 VV_B = 30.0\text{ V} - 20.0\text{ V} = 10.0\text{ V}. The series charge is Q=CBVB=(5.00  μF)(10.0 V)=50.0  μCQ = C_B V_B = (5.00\;\mu\text{F})(10.0\text{ V}) = 50.0\;\mu\text{C}. Thus, CA=QVA=50.0  μC20.0 V=2.50  μFC_A = \frac{Q}{V_A} = \frac{50.0\;\mu\text{C}}{20.0\text{ V}} = 2.50\;\mu\text{F}.

03

A capacitive divider consists of three capacitors in series: C1=2.0  μFC_1 = 2.0\;\mu\text{F}, C2=3.0  μFC_2 = 3.0\;\mu\text{F}, and C3=6.0  μFC_3 = 6.0\;\mu\text{F} connected across a 36.0 V36.0\text{ V} battery. Calculate the voltage drop across each capacitor.

Answer

V1=18.0 V,  V2=12.0 V,  V3=6.0 VV_1 = 18.0\text{ V},\; V_2 = 12.0\text{ V},\; V_3 = 6.0\text{ V}. The equivalent capacitance is 1Ceq=12.0+13.0+16.0=1.0  μF−1  ⟹  Ceq=1.0  μF\frac{1}{C_{\text{eq}}} = \frac{1}{2.0} + \frac{1}{3.0} + \frac{1}{6.0} = 1.0\;\mu\text{F}^{-1} \implies C_{\text{eq}} = 1.0\;\mu\text{F}. Stored charge is Q=CeqV=1.0  μF×36.0 V=36.0  μCQ = C_{\text{eq}} V = 1.0\;\mu\text{F} \times 36.0\text{ V} = 36.0\;\mu\text{C}. Using Vi=QCiV_i = \frac{Q}{C_i} gives V1=362=18 VV_1 = \frac{36}{2} = 18\text{ V}, V2=363=12 VV_2 = \frac{36}{3} = 12\text{ V}, and V3=366=6 VV_3 = \frac{36}{6} = 6\text{ V}.

Loading workspace…