Resources

In an undergraduate physics laboratory experiment, students map equipotential lines on weakly conducting graphite paper using a DC power supply set to 12.0 V12.0\text{ V}, a digital multimeter (DMM), and two cylindrical metal electrodes placed 10.0 cm10.0\text{ cm} apart along the xx-axis at (−5.00 cm,0)(-5.00\text{ cm}, 0) and (+5.00 cm,0)(+5.00\text{ cm}, 0). The reference probe is clamped to the negative electrode (0.00 V0.00\text{ V}). The sensing probe locates four points on the 6.00 V6.00\text{ V} equipotential line at (0.00 cm,0.00 cm)(0.00\text{ cm}, 0.00\text{ cm}), (0.00 cm,2.00 cm)(0.00\text{ cm}, 2.00\text{ cm}), (0.00 cm,−2.00 cm)(0.00\text{ cm}, -2.00\text{ cm}), and (0.00 cm,4.00 cm)(0.00\text{ cm}, 4.00\text{ cm}). Two adjacent equipotential contours are mapped: the 7.00 V7.00\text{ V} line crosses the xx-axis at (+0.75 cm,0)(+0.75\text{ cm}, 0) and the 5.00 V5.00\text{ V} line crosses at (−0.75 cm,0)(-0.75\text{ cm}, 0). (a) Based on the data, state the orientation and shape of the 6.00 V6.00\text{ V} equipotential contour. (b) Estimate the magnitude and direction of the electric field vector E⃗\vec{E} at the origin using a central difference approximation. (c) A student measures a contact resistance of 2.50 kΩ2.50\text{ k}\Omega at the electrode interface while the graphite paper resistance across the electrodes is 10.0 kΩ10.0\text{ k}\Omega. Calculate the actual potential difference established across the graphite paper itself.

Answer and steps

Final answer

(a) A straight line coincident with the yy-axis (x=0x = 0); (b) E⃗≈−(133 V/m)i^\vec{E} \approx -(133\text{ V/m})\hat{i} (magnitude 133 V/m133\text{ V/m}, pointing in the −x-x-direction from higher to lower potential); (c) ΔVpaper=8.00 V\Delta V_{\text{paper}} = 8.00\text{ V} (or 9.60 V9.60\text{ V} if contact resistance is at one electrode only; for two identical contact interfaces of 2.50 kΩ2.50\text{ k}\Omega each, ΔVpaper=8.00 V\Delta V_{\text{paper}} = 8.00\text{ V})

Steps

Part (a): Orientation and Shape of the 6.00 V6.00\text{ V} Equipotential Contour

An equipotential line connects points that have the same electric potential.

  1. Analyze the given coordinates: The sensing probe measures 6.00 V6.00\text{ V} at the points: (0.00 cm,0.00 cm),(0.00 cm,2.00 cm),(0.00 cm,−2.00 cm),(0.00 cm,4.00 cm)(0.00\text{ cm}, 0.00\text{ cm}),\quad (0.00\text{ cm}, 2.00\text{ cm}),\quad (0.00\text{ cm}, -2.00\text{ cm}),\quad (0.00\text{ cm}, 4.00\text{ cm})
  2. Determine the geometry: In all four measured points, the xx-coordinate is identically 0.00 cm0.00\text{ cm} while the yy-coordinate varies.
  3. Conclusion: The 6.00 V6.00\text{ V} equipotential contour is a straight line coincident with the yy-axis (the line x=0x = 0). By symmetry, this line acts as the perpendicular bisector of the segment connecting the two electrodes located at (−5.00 cm,0)(-5.00\text{ cm}, 0) and (+5.00 cm,0)(+5.00\text{ cm}, 0).

Part (b): Electric Field Vector at the Origin

The relationship between the electric field and electric potential in one dimension is given by: Ex=−dVdxE_x = -\frac{dV}{dx}

Using the central difference approximation across the origin: Ex≈−V(x2)−V(x1)x2−x1E_x \approx -\frac{V(x_2) - V(x_1)}{x_2 - x_1}

  1. Identify the data points:

    • At x2=+0.75 cm=+0.0075 mx_2 = +0.75\text{ cm} = +0.0075\text{ m}, the potential is V2=7.00 VV_2 = 7.00\text{ V}.
    • At x1=−0.75 cm=−0.0075 mx_1 = -0.75\text{ cm} = -0.0075\text{ m}, the potential is V1=5.00 VV_1 = 5.00\text{ V}.
  2. Calculate the potential difference and displacement: ΔV=V2−V1=7.00 V−5.00 V=2.00 V\Delta V = V_2 - V_1 = 7.00\text{ V} - 5.00\text{ V} = 2.00\text{ V} Δx=x2−x1=0.0075 m−(−0.0075 m)=0.0150 m\Delta x = x_2 - x_1 = 0.0075\text{ m} - (-0.0075\text{ m}) = 0.0150\text{ m}
  3. Compute the field component: Ex≈−2.00 V0.0150 m≈−133 V/mE_x \approx -\frac{2.00\text{ V}}{0.0150\text{ m}} \approx -133\text{ V/m}
  4. Magnitude and direction:

    • Magnitude: ∣E⃗∣≈133 V/m|\vec{E}| \approx 133\text{ V/m}
    • Direction: The negative sign indicates that the electric field points in the negative xx-direction (−i^-\hat{i}), pointing from higher potential (+x+x) toward lower potential (−x-x).

Common Pitfall: Remember the negative sign in E⃗=−∇V\vec{E} = -\nabla V. Electric field lines always point down the potential gradient, from higher to lower potential.


Part (c): Actual Potential Difference Across the Graphite Paper

In a real laboratory setup, contact resistance occurs where the metal electrodes press against the resistive graphite sheet.

  1. Circuit model: The system forms a voltage divider consisting of the contact resistance and the bulk paper resistance in series with the power supply (Vsupply=12.0 VV_{\text{supply}} = 12.0\text{ V}).
  2. Two-electrode interface case (standard setup): Each electrode interface introduces a contact resistance of Rc=2.50 kΩR_c = 2.50\text{ k}\Omega. Rtotal=Rc+Rpaper+Rc=2.50 kΩ+10.0 kΩ+2.50 kΩ=15.0 kΩR_{\text{total}} = R_c + R_{\text{paper}} + R_c = 2.50\text{ k}\Omega + 10.0\text{ k}\Omega + 2.50\text{ k}\Omega = 15.0\text{ k}\Omega Using the voltage divider formula: ΔVpaper=Vsupply(RpaperRtotal)=12.0 V⋅(10.0 kΩ15.0 kΩ)=8.00 V\Delta V_{\text{paper}} = V_{\text{supply}} \left(\frac{R_{\text{paper}}}{R_{\text{total}}}\right) = 12.0\text{ V} \cdot \left(\frac{10.0\text{ k}\Omega}{15.0\text{ k}\Omega}\right) = 8.00\text{ V}
  3. Single interface alternative: If the 2.50 kΩ2.50\text{ k}\Omega contact resistance is considered across only a single contact interface: Rtotal=10.0 kΩ+2.50 kΩ=12.5 kΩR_{\text{total}} = 10.0\text{ k}\Omega + 2.50\text{ k}\Omega = 12.5\text{ k}\Omega ΔVpaper=12.0 V⋅(10.0 kΩ12.5 kΩ)=9.60 V\Delta V_{\text{paper}} = 12.0\text{ V} \cdot \left(\frac{10.0\text{ k}\Omega}{12.5\text{ k}\Omega}\right) = 9.60\text{ V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign in the relationship between electric field and potential gradient, resulting in an electric field directed along +x toward increasing potential.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    All mapped points have x=0.00 cmx = 0.00\text{ cm}.   ⟹  \implies The 6.00 V6.00\text{ V} equipotential line is a straight line along the yy-axis.

  2. Step 2

    ΔV=7.00 V−5.00 V=2.00 V  ⟹  Δx=0.75 cm−(−0.75 cm)=1.50 cm  ⟹  E=ΔVΔx=2.00 V1.50 cm=1.33 V/cm  ⟹  E=133 V/m in the +x direction\Delta V = 7.00\text{ V} - 5.00\text{ V} = 2.00\text{ V} \implies \Delta x = 0.75\text{ cm} - (-0.75\text{ cm}) = 1.50\text{ cm} \implies E = \frac{\Delta V}{\Delta x} = \frac{2.00\text{ V}}{1.50\text{ cm}} = 1.33\text{ V/cm} \implies E = 133\text{ V/m} \text{ in the } +x \text{ direction}

    Correct

    Ex≈−ΔVΔx=−7.00 V−5.00 V0.0075 m−(−0.0075 m)=−133 V/m  ⟹  E⃗≈−(133 V/m)i^E_x \approx -\frac{\Delta V}{\Delta x} = -\frac{7.00\text{ V} - 5.00\text{ V}}{0.0075\text{ m} - (-0.0075\text{ m})} = -133\text{ V/m} \implies \vec{E} \approx -(133\text{ V/m})\hat{i} (magnitude 133 V/m133\text{ V/m} in the −x-x direction)

    You calculated the correct magnitude, but the fundamental relationship between electric field and potential is Ex=−dVdxE_x = -\frac{dV}{dx}. Because the potential increases from left to right, the electric field must point toward decreasing potential, which is the −x-x direction.

  3. Step 3

    Rtotal=10.0 kΩ+2.50 kΩ=12.5 kΩ  ⟹  Vpaper=12.0 V×(10.0 kΩ12.5 kΩ)=9.60 VR_{\text{total}} = 10.0\text{ k}\Omega + 2.50\text{ k}\Omega = 12.5\text{ k}\Omega \implies V_{\text{paper}} = 12.0\text{ V} \times \left(\frac{10.0\text{ k}\Omega}{12.5\text{ k}\Omega}\right) = 9.60\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the geometric symmetry and concluded that the 6.00 V6.00\text{ V} equipotential line lies along the yy-axis.

You accurately computed the numerical potential difference ΔV\Delta V and distance Δx\Delta x to find the field magnitude.

You correctly set up and solved the voltage divider ratio for the series circuit model.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of negative gradient sign in electric field

You treated the electric field as simply the positive ratio of voltage to distance without applying the directional sign convention.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot that electric field lines are defined to point in the direction of steepest potential decrease (E⃗=−∇V\vec{E} = -\nabla V). When potential increases along +x+x, the field must point along −x-x.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of the Electric Field Vector
  • E⃗=−∇V\vec{E} = -\nabla V, meaning electric field vectors always point from higher electric potential to lower electric potential.

  • Check the sign of ΔV/Δx\Delta V / \Delta x: if VV increases along the positive coordinate axis, add a negative sign so that E⃗\vec{E} points opposite to the increase.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the finite difference formula including the negative sign: Ex≈−V(x2)−V(x1)x2−x1E_x \approx -\frac{V(x_2) - V(x_1)}{x_2 - x_1}.

  2. Substitute V2=7.00 VV_2 = 7.00\text{ V} at x2=+0.0075 mx_2 = +0.0075\text{ m} and V1=5.00 VV_1 = 5.00\text{ V} at x1=−0.0075 mx_1 = -0.0075\text{ m}:

  3. Ex≈−7.00 V−5.00 V0.0075 m−(−0.0075 m)=−2.00 V0.0150 m=−133 V/mE_x \approx -\frac{7.00\text{ V} - 5.00\text{ V}}{0.0075\text{ m} - (-0.0075\text{ m})} = -\frac{2.00\text{ V}}{0.0150\text{ m}} = -133\text{ V/m}.

  4. Interpret the negative sign: the field vector points toward the negative xx-axis, meaning E⃗=−(133 V/m)i^\vec{E} = -(133\text{ V/m})\hat{i}.

Final answer

E⃗≈−(133 V/m)i^\vec{E} \approx -(133\text{ V/m})\hat{i} (magnitude 133 V/m133\text{ V/m} pointing in the −x-x direction)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch equipotential contours with their values and draw arrows pointing downhill (from high voltage to low voltage) to verify field directions visually.

  • Memorize the derivative relation with its explicit minus sign: Ex=−dVdxE_x = -\frac{dV}{dx}.

OverviewACEpath Teacher's Diagnosis

02 The student uses the half-interval distance from the origin instead of the full distance between the 5.00 V and 7.00 V contours in the central difference denominator, doubling the electric field magnitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    All points lie on x=0.00 cm  ⟹  The 6.00 V equipotential contour is a vertical straight line along the y-axis.\text{All points lie on } x = 0.00\text{ cm} \implies \text{The } 6.00\text{ V equipotential contour is a vertical straight line along the } y\text{-axis.}

  2. Step 2

    ΔV=7.00 V−5.00 V=2.00 V  ⟹  Δx=0.75 cm\Delta V = 7.00\text{ V} - 5.00\text{ V} = 2.00\text{ V} \implies \Delta x = 0.75\text{ cm}

    Correct

    ΔV=7.00 V−5.00 V=2.00 V  ⟹  Δx=x2−x1=0.75 cm−(−0.75 cm)=1.50 cm\Delta V = 7.00\text{ V} - 5.00\text{ V} = 2.00\text{ V} \implies \Delta x = x_2 - x_1 = 0.75\text{ cm} - (-0.75\text{ cm}) = 1.50\text{ cm}

    You took Δx\Delta x as the distance from the origin to one contour (0.75 cm0.75\text{ cm}) instead of the full span between the two contours at x=+0.75 cmx = +0.75\text{ cm} and x=−0.75 cmx = -0.75\text{ cm}, which is 1.50 cm1.50\text{ cm}.

  3. Step 3

    Ex=−ΔVΔx=−2.00 V0.75 cm=−2.67 V/cm  ⟹  E=267 V/m in the −x directionE_x = -\frac{\Delta V}{\Delta x} = -\frac{2.00\text{ V}}{0.75\text{ cm}} = -2.67\text{ V/cm} \implies E = 267\text{ V/m} \text{ in the } -x \text{ direction}

    Correct

    Ex≈−2.00 V0.0150 m≈−133 V/m  ⟹  ∣E⃗∣≈133 V/m pointing in the −x directionE_x \approx -\frac{2.00\text{ V}}{0.0150\text{ m}} \approx -133\text{ V/m} \implies |\vec{E}| \approx 133\text{ V/m} \text{ pointing in the } -x \text{ direction}

    Your algebra and directional reasoning were carried out correctly from your chosen Δx\Delta x, but the resulting magnitude is doubled due to the initial interval error.

  4. Step 4

    Rtotal=10.0 kΩ+2.50 kΩ=12.5 kΩ  ⟹  Vpaper=12.0 V×10.0 kΩ12.5 kΩ=9.60 VR_{\text{total}} = 10.0\text{ k}\Omega + 2.50\text{ k}\Omega = 12.5\text{ k}\Omega \implies V_{\text{paper}} = 12.0\text{ V} \times \frac{10.0\text{ k}\Omega}{12.5\text{ k}\Omega} = 9.60\text{ V}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that points sharing x=0x = 0 define a straight line along the yy-axis.

You correctly applied the negative gradient relationship E⃗=−ΔVΔxi^\vec{E} = -\frac{\Delta V}{\Delta x}\hat{i} to deduce that E⃗\vec{E} points in the −x-x-direction from higher to lower potential.

You correctly applied the voltage divider formula to find the voltage drop across the resistive paper.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Central Difference Denominator Half-Interval Error

Using the half-width distance from the center point to one boundary instead of the full coordinate span x2−x1x_2 - x_1 between the two evaluation points.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the step size hh from the expansion center with the full central-difference denominator 2h=x2−x12h = x_2 - x_1. In a symmetric central difference approximation around x0x_0, the denominator must measure the total separation between the two points where potential values are sampled.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify Total Coordinate Separation
  • Δx=xupper−xlower=(+x0)−(−x0)=2x0\Delta x = x_{\text{upper}} - x_{\text{lower}} = (+x_0) - (-x_0) = 2x_0

  • Whenever evaluating ΔVΔx\frac{\Delta V}{\Delta x}, compute x2−x1x_2 - x_1 explicitly with coordinates rather than substituting the distance to the origin.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δx=x2−x1=0.75 cm−(−0.75 cm)=1.50 cm=0.0150 m\Delta x = x_2 - x_1 = 0.75\text{ cm} - (-0.75\text{ cm}) = 1.50\text{ cm} = 0.0150\text{ m}

  2. Ex≈−V2−V1x2−x1=−7.00 V−5.00 V0.0150 m=−133 V/mE_x \approx -\frac{V_2 - V_1}{x_2 - x_1} = -\frac{7.00\text{ V} - 5.00\text{ V}}{0.0150\text{ m}} = -133\text{ V/m}

Final answer

∣E⃗∣≈133 V/m in the −x-direction|\vec{E}| \approx 133\text{ V/m} \text{ in the } -x\text{-direction} (or E⃗≈−(133 V/m)i^\vec{E} \approx -(133\text{ V/m})\hat{i})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down explicit coordinate subtraction x2−x1x_2 - x_1 for all finite difference denominators.

  • Double-check whether a given offset is the half-interval hh or the full interval 2h2h before calculating field magnitudes.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the contact resistance directly or computes the voltage drop across the contact resistance rather than across the graphite paper itself.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The points are at (0,0)(0,0), (0,2)(0,2), (0,−2)(0,-2), and (0,4) cm(0,4)\text{ cm}.   ⟹  \implies The 6.00 V6.00\text{ V} contour is a straight line along the yy-axis.

  2. Step 2

    Ex=−7.00 V−5.00 V0.75 cm−(−0.75 cm)  ⟹  Ex=−2.00 V1.50 cm=−1.33 V/cm  ⟹  E=133 V/m in the −x directionE_x = -\frac{7.00\text{ V} - 5.00\text{ V}}{0.75\text{ cm} - (-0.75\text{ cm})} \implies E_x = \frac{-2.00\text{ V}}{1.50\text{ cm}} = -1.33\text{ V/cm} \implies E = 133\text{ V/m} \text{ in the } -x\text{ direction}

  3. Step 3

    Rtotal=10.0 kΩ+2.50 kΩ=12.5 kΩR_{\text{total}} = 10.0\text{ k}\Omega + 2.50\text{ k}\Omega = 12.5\text{ k}\Omega

  4. Step 4

    Vpaper=12.0 V×2.50 kΩ12.5 kΩ=2.40 VV_{\text{paper}} = 12.0\text{ V} \times \frac{2.50\text{ k}\Omega}{12.5\text{ k}\Omega} = 2.40\text{ V}

    Correct

    Vpaper=12.0 V×10.0 kΩ12.5 kΩ=9.60 VV_{\text{paper}} = 12.0\text{ V} \times \frac{10.0\text{ k}\Omega}{12.5\text{ k}\Omega} = 9.60\text{ V} (or 12.0 V×10.0 kΩ15.0 kΩ=8.00 V12.0\text{ V} \times \frac{10.0\text{ k}\Omega}{15.0\text{ k}\Omega} = 8.00\text{ V} for two interfaces)

    You placed the contact resistance 2.50 kΩ2.50\text{ k}\Omega in the numerator of the voltage divider ratio instead of Rpaper=10.0 kΩR_{\text{paper}} = 10.0\text{ k}\Omega. This computes the voltage drop across the contact resistance (Vcontact=2.40 VV_{\text{contact}} = 2.40\text{ V}) rather than the potential difference across the graphite paper.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified the equipotential line along the yy-axis from the given coordinates.

You correctly used the potential gradient formula with the central difference approximation to compute both the magnitude and direction of the electric field.

You recognized that contact resistance acts in series with the sheet resistance.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Voltage Divider Component Selection Error

You substituted the contact resistance Rc=2.50 kΩR_c = 2.50\text{ k}\Omega instead of the graphite sheet resistance Rpaper=10.0 kΩR_{\text{paper}} = 10.0\text{ k}\Omega into the numerator of the voltage divider formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the target component's resistance with an extraneous series resistance when setting up a voltage divider ratio.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Target Component in a Voltage Divider
  • For a series circuit connected to VtotalV_{\text{total}}, the potential difference across resistor RxR_x is Vx=Vtotal(RxRtotal)V_x = V_{\text{total}} \left(\frac{R_x}{R_{\text{total}}}\right).

  • Always double-check that the numerator in the voltage divider expression corresponds directly to the specific component whose voltage drop you need to find.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the target component: we want the voltage drop across the graphite paper, so the numerator is Rpaper=10.0 kΩR_{\text{paper}} = 10.0\text{ k}\Omega.

  2. Apply the voltage divider formula using your series resistance: Vpaper=12.0 V×10.0 kΩ12.5 kΩ=9.60 VV_{\text{paper}} = 12.0\text{ V} \times \frac{10.0\text{ k}\Omega}{12.5\text{ k}\Omega} = 9.60\text{ V} (or Vpaper=12.0 V×10.0 kΩ15.0 kΩ=8.00 VV_{\text{paper}} = 12.0\text{ V} \times \frac{10.0\text{ k}\Omega}{15.0\text{ k}\Omega} = 8.00\text{ V} if accounting for contact resistance at both electrode interfaces).

Final answer

ΔVpaper=9.60 V\Delta V_{\text{paper}} = 9.60\text{ V} (for a single contact interface) or 8.00 V8.00\text{ V} (for two contact interfaces)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the voltage divider rule and verify that the resistor of interest is placed in the numerator.

  • Check whether laboratory electrode contacts occur at both the positive and negative terminals when modeling total series resistance.

Lock it in

Similar question

01

Two parallel equipotential plates are oriented perpendicular to the xx-axis. The plate at x=2.0 cmx = 2.0\text{ cm} is at +15.0 V+15.0\text{ V}, and the plate at x=6.0 cmx = 6.0\text{ cm} is at +5.0 V+5.0\text{ V}. Find the components and direction of the electric field E⃗\vec{E} between the plates.

Answer

Ex=−5.0 V−15.0 V0.060 m−0.020 m=+250 V/mE_x = -\frac{5.0\text{ V} - 15.0\text{ V}}{0.060\text{ m} - 0.020\text{ m}} = +250\text{ V/m}. The electric field vector is E⃗=+(250 V/m)i^\vec{E} = +(250\text{ V/m})\hat{i}, pointing toward the positive xx-direction from high to low potential.

02

In a 2D mapping experiment, the electric potential is given by V(x,y)=4x2−3yV(x, y) = 4x^2 - 3y, where xx and yy are in meters and VV is in volts. Determine the electric field vector E⃗\vec{E} at the point (1.0 m,2.0 m)(1.0\text{ m}, 2.0\text{ m}).

Answer

Using E⃗=−∇V=−(∂V∂xi^+∂V∂yj^)\vec{E} = -\nabla V = -\left(\frac{\partial V}{\partial x}\hat{i} + \frac{\partial V}{\partial y}\hat{j}\right): ∂V∂x=8x=8 V/m\frac{\partial V}{\partial x} = 8x = 8\text{ V/m}, so Ex=−8 V/mE_x = -8\text{ V/m}. ∂V∂y=−3 V/m\frac{\partial V}{\partial y} = -3\text{ V/m}, so Ey=−(−3)=+3 V/mE_y = -(-3) = +3\text{ V/m}. Therefore, E⃗=−(8.0 V/m)i^+(3.0 V/m)j^\vec{E} = -(8.0\text{ V/m})\hat{i} + (3.0\text{ V/m})\hat{j}.

03

A cylindrical coaxial cable has an inner conductor at potential Va=50.0 VV_a = 50.0\text{ V} at radius ra=1.00 mmr_a = 1.00\text{ mm} and an outer grounded shield (Vb=0.0 VV_b = 0.0\text{ V}) at radius rb=10.0 mmr_b = 10.0\text{ mm}. The potential varies as V(r)=Valn⁡(rb/r)ln⁡(rb/ra)V(r) = V_a \frac{\ln(r_b/r)}{\ln(r_b/r_a)}. Derive the expression for the radial electric field Er(r)E_r(r) and compute its magnitude and direction at r=5.00 mmr = 5.00\text{ mm}.

Answer

Er=−dVdr=Valn⁡(rb/ra)⋅1rE_r = -\frac{dV}{dr} = \frac{V_a}{\ln(r_b/r_a)} \cdot \frac{1}{r}. At r=5.00 mm=0.00500 mr = 5.00\text{ mm} = 0.00500\text{ m}, with ln⁡(10.0/1.00)=ln⁡(10)≈2.303\ln(10.0/1.00) = \ln(10) \approx 2.303: Er=50.02.303×0.00500≈4340 V/m=4.34 kV/mE_r = \frac{50.0}{2.303 \times 0.00500} \approx 4340\text{ V/m} = 4.34\text{ kV/m}, pointing radially outward (+r^+\hat{r}) from high to low potential.

Loading workspace…