Resources

A tangent galvanometer consists of a flat, vertical circular coil of N=50N = 50 turns of wire with an average radius R=10.0 cmR = 10.0\text{ cm}. The plane of the coil is aligned exactly parallel to the local magnetic meridian of the Earth, where the horizontal component of Earth's magnetic field is BE=2.00×10−5 TB_E = 2.00\times 10^{-5}\text{ T} directed toward magnetic North. A small magnetic compass needle is placed at the center of the coil. When a direct current II is passed through the coil, it produces an east-west magnetic field that deflects the compass needle so that it aligns with the local resultant magnetic field line at an angle of θ=60.0∘\theta = 60.0^\circ from magnetic North. (a) Calculate the required current II passing through the coil. (b) If an electron is launched from the center of the coil with velocity v⃗=(2.50×106 m/s)\vec{v} = (2.50\times 10^6\text{ m/s}) directed vertically upward along the +z+z-axis, calculate the magnitude and direction of the initial magnetic deflection force acting on the electron.

Answer and steps

Final answer

(a) I=1.10×10−1 AI = 1.10\times 10^{-1}\text{ A} (or 0.110 A0.110\text{ A}); (b) FB=1.60×10−17 NF_B = 1.60\times 10^{-17}\text{ N}, directed at an angle of 30.0∘30.0^\circ South of West (perpendicular to both v⃗\vec{v} and B⃗net\vec{B}_{\text{net}}).

Steps

Part (a): Determining the Current II

  1. Principle of the Tangent Galvanometer: The coil of a tangent galvanometer lies in the magnetic meridian (the vertical plane containing the horizontal component of Earth's magnetic field, BEB_E, pointing toward magnetic North). When a current II passes through the coil, it generates a magnetic field BcB_c at its center along its axis, which is oriented in the East-West direction (perpendicular to BEB_E).
  2. Resultant Field and Deflection Angle: The magnetic needle aligns with the vector sum of the two perpendicular horizontal fields: tan⁡θ=BcBE\tan \theta = \frac{B_c}{B_E} where θ=60.0∘\theta = 60.0^\circ is the deflection angle from magnetic North.
  3. Magnetic Field at the Center of the Coil: The magnetic field produced at the center of a circular coil of NN turns and radius RR carrying current II is: Bc=μ0NI2RB_c = \frac{\mu_0 N I}{2 R}
  4. Solving for Current II: Equating the two expressions for BcB_c: μ0NI2R=BEtan⁡θ  ⟹  I=2RBEtan⁡θμ0N\frac{\mu_0 N I}{2 R} = B_E \tan \theta \implies I = \frac{2 R B_E \tan \theta}{\mu_0 N}

    Substitute the given values (R=10.0 cm=0.100 mR = 10.0\text{ cm} = 0.100\text{ m}, N=50N = 50, BE=2.00×10−5 TB_E = 2.00 \times 10^{-5}\text{ T}, θ=60.0∘\theta = 60.0^\circ, and μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\text{ T}\cdot\text{m/A}): I=2(0.100 m)(2.00×10−5 T)tan⁡(60.0∘)(4π×10−7 T⋅m/A)(50)I = \frac{2(0.100\text{ m})(2.00 \times 10^{-5}\text{ T})\tan(60.0^\circ)}{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(50)} I=(4.00×10−6)(3)2.00π×10−5≈6.928×10−66.283×10−5≈0.110 A=1.10×10−1 AI = \frac{(4.00 \times 10^{-6})(\sqrt{3})}{2.00\pi \times 10^{-5}} \approx \frac{6.928 \times 10^{-6}}{6.283 \times 10^{-5}} \approx 0.110\text{ A} = 1.10 \times 10^{-1}\text{ A}


Part (b): Magnitude and Direction of the Magnetic Force on the Electron

  1. Net Magnetic Field at the Center: Since BcB_c and BEB_E are perpendicular horizontal vectors: Bnet=BEcos⁡θ=2.00×10−5 Tcos⁡(60.0∘)=2.00×10−5 T0.500=4.00×10−5 TB_{\text{net}} = \frac{B_E}{\cos \theta} = \frac{2.00 \times 10^{-5}\text{ T}}{\cos(60.0^\circ)} = \frac{2.00 \times 10^{-5}\text{ T}}{0.500} = 4.00 \times 10^{-5}\text{ T}
  2. Magnitude of the Magnetic Force: The electron is launched vertically upward (v⃗\vec{v} along the +z+z-axis), which is perpendicular to the entire horizontal plane containing B⃗net\vec{B}_{\text{net}} (ϕ=90.0∘\phi = 90.0^\circ).

    The magnitude of the magnetic Lorentz force is: FB=∣q∣vBnetsin⁡90.0∘=evBnetF_B = |q| v B_{\text{net}} \sin 90.0^\circ = e v B_{\text{net}} Substitute e=1.60×10−19 Ce = 1.60 \times 10^{-19}\text{ C}, v=2.50×106 m/sv = 2.50 \times 10^6\text{ m/s}, and Bnet=4.00×10−5 TB_{\text{net}} = 4.00 \times 10^{-5}\text{ T}: FB=(1.60×10−19 C)(2.50×106 m/s)(4.00×10−5 T)=1.60×10−17 NF_B = (1.60 \times 10^{-19}\text{ C})(2.50 \times 10^6\text{ m/s})(4.00 \times 10^{-5}\text{ T}) = 1.60 \times 10^{-17}\text{ N}

  3. Direction of the Magnetic Force:

    • The magnetic force is given by F⃗B=q(v⃗×B⃗net)=−e(v⃗×B⃗net)\vec{F}_B = q(\vec{v} \times \vec{B}_{\text{net}}) = -e(\vec{v} \times \vec{B}_{\text{net}}).
    • Because the electron carries a negative charge, the force direction is opposite to the right-hand rule result of v⃗×B⃗net\vec{v} \times \vec{B}_{\text{net}}.
    • Since v⃗\vec{v} is vertically upward and B⃗net\vec{B}_{\text{net}} lies horizontally at 60.0∘60.0^\circ from North, F⃗B\vec{F}_B lies entirely in the horizontal plane, perpendicular to both v⃗\vec{v} and B⃗net\vec{B}_{\text{net}}.
    • Being perpendicular to B⃗net\vec{B}_{\text{net}} in the horizontal plane, its line of action forms a complementary angle of 90.0∘−60.0∘=30.0∘90.0^\circ - 60.0^\circ = 30.0^\circ relative to the East-West axis, directed at an angle of 30.0∘ South of West30.0^\circ\text{ South of West}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to account for Earth's magnetic field when calculating the magnetic force, using only the coil's field B_c.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bc=BEtan⁡θ  ⟹  Bc=(2.00×10−5 T)×tan⁡60.0∘=3.464×10−5 TB_c = B_E \tan \theta \implies B_c = (2.00 \times 10^{-5}\text{ T}) \times \tan 60.0^\circ = 3.464 \times 10^{-5}\text{ T}

  2. Step 2

    Bc=μ0NI2R  ⟹  I=2RBcμ0N=2×0.100×3.464×10−54π×10−7×50  ⟹  I=0.110 AB_c = \frac{\mu_0 N I}{2R} \implies I = \frac{2 R B_c}{\mu_0 N} = \frac{2 \times 0.100 \times 3.464 \times 10^{-5}}{4\pi \times 10^{-7} \times 50} \implies I = 0.110\text{ A}

  3. Step 3

    F=evBcF = e v B_c

    Correct

    Bnet=BEcos⁡θ=Bc2+BE2=4.00×10−5 T  ⟹  F=evBnetB_{\text{net}} = \frac{B_E}{\cos \theta} = \sqrt{B_c^2 + B_E^2} = 4.00 \times 10^{-5}\text{ T} \implies F = e v B_{\text{net}}

    You calculated the Lorentz force using only the magnetic field generated by the coil, BcB_c. The electron moves through the combined superposition of Earth's field and the coil's field, B⃗net=B⃗c+B⃗E\vec{B}_{\text{net}} = \vec{B}_c + \vec{B}_E.

  4. Step 4

    F=(1.60×10−19)×(2.50×106)×(3.464×10−5)  ⟹  F=1.39×10−17 NF = (1.60 \times 10^{-19}) \times (2.50 \times 10^6) \times (3.464 \times 10^{-5}) \implies F = 1.39 \times 10^{-17}\text{ N}, horizontally perpendicular to the coil's field

    Correct

    FB=(1.60×10−19 C)(2.50×106 m/s)(4.00×10−5 T)=1.60×10−17 NF_B = (1.60 \times 10^{-19}\text{ C})(2.50 \times 10^6\text{ m/s})(4.00 \times 10^{-5}\text{ T}) = 1.60 \times 10^{-17}\text{ N}, directed 30.0∘30.0^\circ South of West

    Because BcB_c was used instead of BnetB_{\text{net}}, the computed force magnitude is slightly too small, and the force direction is perpendicular to B⃗c\vec{B}_c rather than perpendicular to the net field B⃗net\vec{B}_{\text{net}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the tangent law for the galvanometer to find BcB_c.

You applied the correct on-axis center magnetic field formula for a flat circular coil.

You calculated the correct current I=0.110 AI = 0.110\text{ A}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting Superposed External Field

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the magnetic field of the coil as the only field present when finding the Lorentz force, forgetting that the total field experienced by any charge is the vector sum of all overlapping fields (superposition of Earth's field and the coil's field).

REASONING PATH
Your ACEpath teacher’s suggested approach
Principle of Superposition for $\vec{B}$
  • Whenever multiple independent magnetic sources exist in a region, the net field experienced by a moving charge is B⃗net=∑B⃗i\vec{B}_{\text{net}} = \sum \vec{B}_i.

  • Before computing F⃗=q(v⃗×B⃗)\vec{F} = q(\vec{v} \times \vec{B}), list every source of magnetic field (e.g., coils, wires, Earth) and find their vector resultant B⃗net\vec{B}_{\text{net}}.

Resultant in a Tangent Galvanometer
  • Because B⃗E\vec{B}_E (North) and B⃗c\vec{B}_c (East-West) are mutually perpendicular, Bnet=BE2+Bc2=BEcos⁡θB_{\text{net}} = \sqrt{B_E^2 + B_c^2} = \frac{B_E}{\cos \theta}.

  • Use Bnet=BEcos⁡θB_{\text{net}} = \frac{B_E}{\cos \theta} to find the total magnitude directly from the deflection angle.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the net horizontal magnetic field: Bnet=BEcos⁡60.0∘=2.00×10−5 T0.500=4.00×10−5 TB_{\text{net}} = \frac{B_E}{\cos 60.0^\circ} = \frac{2.00 \times 10^{-5}\text{ T}}{0.500} = 4.00 \times 10^{-5}\text{ T}.

  2. Calculate the Lorentz force magnitude: FB=evBnetsin⁡90.0∘=(1.60×10−19 C)(2.50×106 m/s)(4.00×10−5 T)=1.60×10−17 NF_B = e v B_{\text{net}} \sin 90.0^\circ = (1.60 \times 10^{-19}\text{ C})(2.50 \times 10^6\text{ m/s})(4.00 \times 10^{-5}\text{ T}) = 1.60 \times 10^{-17}\text{ N}.

  3. Determine the direction using F⃗B=−e(v⃗×B⃗net)\vec{F}_B = -e(\vec{v} \times \vec{B}_{\text{net}}): with v⃗\vec{v} along +z+z (upward) and B⃗net\vec{B}_{\text{net}} directed at 60.0∘60.0^\circ East of North, v⃗×B⃗net\vec{v} \times \vec{B}_{\text{net}} points 30.0∘30.0^\circ North of East; the negative sign flips it to 30.0∘30.0^\circ South of West.

Final answer

(a) I=0.110 AI = 0.110\text{ A}; (b) FB=1.60×10−17 NF_B = 1.60 \times 10^{-17}\text{ N}, directed 30.0∘30.0^\circ South of West

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector superposition of magnetic fields when an external background field like Earth's is present.

  • Practice using the right-hand rule for negatively charged particles with non-axial field vectors.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly uses sin θ instead of tan θ in the tangent galvanometer equilibrium relation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Bc=BEsin⁡θ  ⟹  Bc=(2.00×10−5)×sin⁡60.0∘=1.732×10−5 TB_c = B_E \sin\theta \implies B_c = (2.00\times 10^{-5}) \times \sin 60.0^\circ = 1.732\times 10^{-5}\text{ T}

    Correct

    tan⁡θ=BcBE  ⟹  Bc=BEtan⁡60.0∘=(2.00×10−5 T)(3)≈3.464×10−5 T\tan\theta = \frac{B_c}{B_E} \implies B_c = B_E \tan 60.0^\circ = (2.00\times 10^{-5}\text{ T})(\sqrt{3}) \approx 3.464\times 10^{-5}\text{ T}

    Because Earth's field BEB_E points North and the coil field BcB_c is perpendicular along the East-West axis, the angle θ\theta between the resultant field and magnetic North satisfies tan⁡θ=oppositeadjacent=BcBE\tan\theta = \frac{\text{opposite}}{\text{adjacent}} = \frac{B_c}{B_E}, not sin⁡θ\sin\theta.

  2. Step 2

    I=2RBcμ0N=2×0.100×1.732×10−54π×10−7×50  ⟹  I=0.0551 AI = \frac{2 R B_c}{\mu_0 N} = \frac{2 \times 0.100 \times 1.732\times 10^{-5}}{4\pi\times 10^{-7} \times 50} \implies I = 0.0551\text{ A}

    Correct

    I=2RBcμ0N=2(0.100 m)(3.464×10−5 T)(4π×10−7 T⋅m/A)(50)≈0.110 AI = \frac{2 R B_c}{\mu_0 N} = \frac{2(0.100\text{ m})(3.464\times 10^{-5}\text{ T})}{(4\pi\times 10^{-7}\text{ T}\cdot\text{m/A})(50)} \approx 0.110\text{ A}

    You applied the circular coil formula Bc=μ0NI2RB_c = \frac{\mu_0 N I}{2R} correctly, but the numerical answer inherits the incorrect value of BcB_c from Step 1.

  3. Step 3

    Btotal=BE2+Bc2=(2.00×10−5)2+(1.732×10−5)2=2.65×10−5 TB_{\text{total}} = \sqrt{B_E^2 + B_c^2} = \sqrt{(2.00\times 10^{-5})^2 + (1.732\times 10^{-5})^2} = 2.65\times 10^{-5}\text{ T}

    Correct

    Bnet=BE2+Bc2=BEcos⁡60.0∘=4.00×10−5 TB_{\text{net}} = \sqrt{B_E^2 + B_c^2} = \frac{B_E}{\cos 60.0^\circ} = 4.00\times 10^{-5}\text{ T}

    Your vector addition method using the Pythagorean theorem is conceptually sound, but the result is affected by the earlier calculation of BcB_c.

  4. Step 4

    F=evBtotal=(1.60×10−19)×(2.50×106)×(2.65×10−5)  ⟹  F=1.06×10−17 NF = e v B_{\text{total}} = (1.60\times 10^{-19}) \times (2.50\times 10^6) \times (2.65\times 10^{-5}) \implies F = 1.06\times 10^{-17}\text{ N}, in the horizontal plane perpendicular to BtotalB_{\text{total}}

    Correct

    FB=evBnet=(1.60×10−19 C)(2.50×106 m/s)(4.00×10−5 T)=1.60×10−17 NF_B = e v B_{\text{net}} = (1.60\times 10^{-19}\text{ C})(2.50\times 10^6\text{ m/s})(4.00\times 10^{-5}\text{ T}) = 1.60\times 10^{-17}\text{ N}, directed 30.0∘ South of West30.0^\circ\text{ South of West}

    You correctly used the Lorentz force formula F=qvBsin⁡90∘F = qvB\sin 90^\circ. The resulting numerical value was affected by BtotalB_{\text{total}}, and the direction needs to be specified with a concrete compass heading (30.0∘ South of West30.0^\circ\text{ South of West}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the formula for the magnetic field at the center of a circular coil, B=μ0NI2RB = \frac{\mu_0 N I}{2R}.

You recognized that the Earth's field and the coil's field are perpendicular horizontal vectors.

You correctly applied the Lorentz magnetic force formula F=qvBF = qvB for a charge moving perpendicular to the magnetic field.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Tangent Galvanometer Trigonometric Ratio Error

You equated BcB_c to BEsin⁡θB_E \sin\theta rather than using the tangent of the deflection angle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In a right triangle where BEB_E and BcB_c are the two perpendicular legs (adjacent and opposite to θ\theta), the ratio of the legs is given by tan⁡θ=BcBE\tan\theta = \frac{B_c}{B_E}, while sin⁡θ\sin\theta is the ratio of the opposite leg to the hypotenuse (BnetB_{\text{net}}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Tangent Law of Magnetism
  • When a magnetic needle is subjected to two mutually perpendicular horizontal fields BEB_E (along the meridian) and BcB_c (perpendicular to the meridian), it deflects by angle θ\theta from BEB_E such that Bc=BEtan⁡θB_c = B_E \tan\theta.

  • Sketch the two perpendicular field legs first, identify θ\theta relative to the baseline field, and write the ratio of opposite-over-adjacent as tangent.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the tangent condition: Bc=BEtan⁡(60.0∘)=(2.00×10−5 T)(3)≈3.464×10−5 TB_c = B_E \tan(60.0^\circ) = (2.00\times 10^{-5}\text{ T})(\sqrt{3}) \approx 3.464\times 10^{-5}\text{ T}.

  2. Solve for the current: I=2RBcμ0N=2(0.100 m)(3.464×10−5 T)(4π×10−7 T⋅m/A)(50)≈0.110 AI = \frac{2 R B_c}{\mu_0 N} = \frac{2(0.100\text{ m})(3.464\times 10^{-5}\text{ T})}{(4\pi\times 10^{-7}\text{ T}\cdot\text{m/A})(50)} \approx 0.110\text{ A}.

  3. Find the resultant field: Bnet=BEcos⁡(60.0∘)=2.00×10−5 T0.500=4.00×10−5 TB_{\text{net}} = \frac{B_E}{\cos(60.0^\circ)} = \frac{2.00\times 10^{-5}\text{ T}}{0.500} = 4.00\times 10^{-5}\text{ T}.

  4. Calculate the magnetic force magnitude: FB=evBnet=(1.60×10−19 C)(2.50×106 m/s)(4.00×10−5 T)=1.60×10−17 NF_B = e v B_{\text{net}} = (1.60\times 10^{-19}\text{ C})(2.50\times 10^6\text{ m/s})(4.00\times 10^{-5}\text{ T}) = 1.60\times 10^{-17}\text{ N}.

  5. Determine the direction: F⃗B=−e(v⃗×B⃗net)\vec{F}_B = -e(\vec{v}\times\vec{B}_{\text{net}}). With v⃗\vec{v} upward and B⃗net\vec{B}_{\text{net}} at 60.0∘60.0^\circ East of North, the force points in the horizontal plane at 90.0∘−60.0∘=30.0∘90.0^\circ - 60.0^\circ = 30.0^\circ South of West.

Final answer

(a) I=0.110 AI = 0.110\text{ A}; (b) FB=1.60×10−17 NF_B = 1.60\times 10^{-17}\text{ N}, directed 30.0∘ South of West30.0^\circ\text{ South of West}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw the vector triangle showing the two perpendicular components (BEB_E and BcB_c) to verify which side is opposite and which is adjacent.

  • Remember that the tangent galvanometer is named precisely after the tangent relation Bc=BEtan⁡θB_c = B_E \tan\theta.

  • When finding the direction of magnetic force on a negatively charged particle, evaluate the right-hand rule for v⃗×B⃗\vec{v}\times\vec{B} and then reverse the vector direction.

OverviewACEpath Teacher's Diagnosis

03 The student omits the number of turns N in the formula for the magnetic field at the center of the coil.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Bc=BEtan⁡60.0∘=3.464×10−5 TB_c = B_E \tan 60.0^\circ = 3.464 \times 10^{-5}\text{ T}

  2. Step 2

    Bc=μ0I2R  ⟹  I=2RBcμ0=2×0.100×3.464×10−54π×10−7  ⟹  I=5.51 AB_c = \frac{\mu_0 I}{2 R} \implies I = \frac{2 R B_c}{\mu_0} = \frac{2 \times 0.100 \times 3.464 \times 10^{-5}}{4\pi \times 10^{-7}} \implies I = 5.51\text{ A}

    Correct

    Bc=μ0NI2R  ⟹  I=2RBcμ0N=2(0.100)(3.464×10−5)(4π×10−7)(50)≈0.110 AB_c = \frac{\mu_0 N I}{2 R} \implies I = \frac{2 R B_c}{\mu_0 N} = \frac{2(0.100)(3.464 \times 10^{-5})}{(4\pi \times 10^{-7})(50)} \approx 0.110\text{ A}

    You omitted the factor N=50N = 50 turns in the magnetic field formula for a multi-turn circular coil (Bc=μ0NI2RB_c = \frac{\mu_0 N I}{2R}). Because each turn contributes equally to the field at the center, omitting NN made your calculated current 5050 times too large.

  3. Step 3

    Btotal=BEcos⁡60.0∘=4.00×10−5 TB_{\text{total}} = \frac{B_E}{\cos 60.0^\circ} = 4.00 \times 10^{-5}\text{ T}

  4. Step 4

    F=evBtotal=(1.60×10−19)×(2.50×106)×(4.00×10−5)  ⟹  F=1.60×10−17 NF = e v B_{\text{total}} = (1.60 \times 10^{-19}) \times (2.50 \times 10^6) \times (4.00 \times 10^{-5}) \implies F = 1.60 \times 10^{-17}\text{ N}, horizontally perpendicular to BtotalB_{\text{total}}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the tangent deflection formula to relate the coil's magnetic field to the horizontal component of Earth's magnetic field.

You accurately found the total resultant magnetic field and calculated the magnitude of the magnetic Lorentz force acting on the electron.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of coil turns $N$

You used the single-loop formula B=μ0I2RB = \frac{\mu_0 I}{2R} instead of including the N=50N = 50 turns given in the problem statement.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the multiplier NN when applying the magnetic field formula for closely wound coils or loops.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check coil turn count
  • For a flat circular coil with NN turns, the central magnetic field is B=μ0NI2RB = \frac{\mu_0 N I}{2R}.

  • Whenever a problem specifies a coil or solenoid with multiple turns, verify that NN appears in the magnetic field equation before solving for current.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the number of turns N=50N = 50 in the formula: Bc=μ0NI2RB_c = \frac{\mu_0 N I}{2R}.

  2. Rearrange for current: I=2RBcμ0NI = \frac{2 R B_c}{\mu_0 N}.

  3. Substitute values: I=2(0.100 m)(3.464×10−5 T)(4π×10−7 T⋅m/A)(50)≈0.110 AI = \frac{2(0.100\text{ m})(3.464 \times 10^{-5}\text{ T})}{(4\pi \times 10^{-7}\text{ T}\cdot\text{m/A})(50)} \approx 0.110\text{ A}.

Final answer

(a) I=0.110 AI = 0.110\text{ A} (or 1.10×10−1 A1.10 \times 10^{-1}\text{ A}); (b) FB=1.60×10−17 NF_B = 1.60 \times 10^{-17}\text{ N}, directed at 30.0∘ South of West30.0^\circ\text{ South of West}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formula for magnetic fields at the center of circular coils and note how NN scales the total field by superposition.

  • Practice identifying whether given coil configurations consist of a single turn or an NN-turn winding before rearranging algebraic terms.

Lock it in

Similar question

01

A tangent galvanometer has a coil producing an East-directed magnetic field of Bc=3.00×10−5 TB_c = 3.00 \times 10^{-5}\text{ T} at its center. Earth's horizontal field is BE=4.00×10−5 TB_E = 4.00 \times 10^{-5}\text{ T} directed North. A proton (q=+1.60×10−19 Cq = +1.60 \times 10^{-19}\text{ C}) travels vertically upward with speed v=1.00×105 m/sv = 1.00 \times 10^5\text{ m/s} through the center. Calculate the magnitude of the magnetic force acting on the proton.

Answer

Bnet=Bc2+BE2=(3.00)2+(4.00)2×10−5 T=5.00×10−5 TB_{\text{net}} = \sqrt{B_c^2 + B_E^2} = \sqrt{(3.00)^2 + (4.00)^2} \times 10^{-5}\text{ T} = 5.00 \times 10^{-5}\text{ T}. Since v⃗\vec{v} is perpendicular to the horizontal plane, F=qvBnet=(1.60×10−19 C)(1.00×105 m/s)(5.00×10−5 T)=8.00×10−19 NF = q v B_{\text{net}} = (1.60 \times 10^{-19}\text{ C})(1.00 \times 10^5\text{ m/s})(5.00 \times 10^{-5}\text{ T}) = 8.00 \times 10^{-19}\text{ N}.

02

A circular coil of radius R=5.00 cmR = 5.00\text{ cm} with N=20N = 20 turns carries a current II oriented in the magnetic meridian where BE=2.50×10−5 TB_E = 2.50 \times 10^{-5}\text{ T}. The compass needle at the center deflects by θ=45.0∘\theta = 45.0^\circ. An electron moves vertically downward with velocity v=4.00×106 m/sv = 4.00 \times 10^6\text{ m/s}. Find the net magnetic field magnitude at the center and the magnetic force magnitude on the electron.

Answer

Since θ=45.0∘\theta = 45.0^\circ, Bc=BE=2.50×10−5 TB_c = B_E = 2.50 \times 10^{-5}\text{ T}. The net field is Bnet=BEcos⁡45.0∘=2BE≈3.54×10−5 TB_{\text{net}} = \frac{B_E}{\cos 45.0^\circ} = \sqrt{2} B_E \approx 3.54 \times 10^{-5}\text{ T}. The force magnitude is F=evBnet=(1.60×10−19 C)(4.00×106 m/s)(3.54×10−5 T)≈2.26×10−17 NF = e v B_{\text{net}} = (1.60 \times 10^{-19}\text{ C})(4.00 \times 10^6\text{ m/s})(3.54 \times 10^{-5}\text{ T}) \approx 2.26 \times 10^{-17}\text{ N}.

03

In a tangent galvanometer experiment, the needle deflects by θ=30.0∘\theta = 30.0^\circ East of North when current is applied. Earth's horizontal field is BE=3.00×10−5 TB_E = 3.00 \times 10^{-5}\text{ T}. A charged particle with charge q=−2.00×10−9 Cq = -2.00 \times 10^{-9}\text{ C} is projected vertically upward along +z+z at speed v=5.00×104 m/sv = 5.00 \times 10^4\text{ m/s}. Determine both the magnitude and the horizontal compass direction of the magnetic force on the particle.

Answer

Bnet=BEcos⁡30.0∘=3.00×10−53/2=23×10−5 T≈3.46×10−5 TB_{\text{net}} = \frac{B_E}{\cos 30.0^\circ} = \frac{3.00 \times 10^{-5}}{\sqrt{3}/2} = 2\sqrt{3} \times 10^{-5}\text{ T} \approx 3.46 \times 10^{-5}\text{ T}. Force magnitude: F=∣q∣vBnet=(2.00×10−9 C)(5.00×104 m/s)(3.464×10−5 T)=3.46×10−9 NF = |q| v B_{\text{net}} = (2.00 \times 10^{-9}\text{ C})(5.00 \times 10^4\text{ m/s})(3.464 \times 10^{-5}\text{ T}) = 3.46 \times 10^{-9}\text{ N}. For direction: v⃗\vec{v} is +z+z (up), B⃗net\vec{B}_{\text{net}} points 30.0∘30.0^\circ East of North. By the right-hand rule, v⃗×B⃗net\vec{v} \times \vec{B}_{\text{net}} points 30.0∘30.0^\circ North of West. Since q<0q < 0, the force vector is reversed by 180∘180^\circ, pointing 30.0∘30.0^\circ South of East.

Loading workspace…