Resources

A gust of wind applies an aerodynamic force vector F⃗=85.0 N\vec{F} = 85.0\text{ N} on a weather vane in a direction specified as 32.0∘32.0^\circ south of west. Setting standard Cartesian axes where east is +x+x and north is +y+y, express the components FxF_x and FyF_y with their proper algebraic signs.

Answer and steps

Final answer

Fx=−72.1 NF_x = -72.1\text{ N}, Fy=−45.0 NF_y = -45.0\text{ N}

Steps

01

Set Up the Coordinate System and Directions

Define the standard Cartesian coordinate system aligned with compass directions:

  • The positive xx-axis points East, so the negative xx-axis points West.
  • The positive yy-axis points North, so the negative yy-axis points South.

The force vector F⃗\vec{F} points in the direction 32.0∘32.0^\circ south of west:

  • Starting from the negative xx-axis (West), rotate 32.0∘32.0^\circ toward the negative yy-axis (South).
  • This places the vector entirely in the third quadrant, meaning both the horizontal (xx) component and vertical (yy) component must be negative.

02

Determine the Components Using Right-Triangle Trigonometry

In the right triangle formed by the vector F⃗\vec{F} and the axes:

  • The component along the West-East direction (FxF_x) is adjacent to the 32.0∘32.0^\circ angle.
  • The component along the South-North direction (FyF_y) is opposite to the 32.0∘32.0^\circ angle.
  • The magnitude of the hypotenuse is F=85.0 NF = 85.0\text{ N}.

Calculate the horizontal component FxF_x: Fx=−Fcos⁡(32.0∘)F_x = -F \cos(32.0^\circ) Fx=−85.0 N⋅cos⁡(32.0∘)≈−85.0 N⋅0.8480=−72.08 N≈−72.1 NF_x = -85.0\text{ N} \cdot \cos(32.0^\circ) \approx -85.0\text{ N} \cdot 0.8480 = -72.08\text{ N} \approx -72.1\text{ N}

Calculate the vertical component FyF_y: Fy=−Fsin⁡(32.0∘)F_y = -F \sin(32.0^\circ) Fy=−85.0 N⋅sin⁡(32.0∘)≈−85.0 N⋅0.5299=−45.04 N≈−45.0 NF_y = -85.0\text{ N} \cdot \sin(32.0^\circ) \approx -85.0\text{ N} \cdot 0.5299 = -45.04\text{ N} \approx -45.0\text{ N}


Common Pitfall

A common mistake is assigning the signs purely from trigonometric functions evaluated without checking the quadrant. If you use the standard position angle measured counterclockwise from the positive xx-axis: θ=180∘+32.0∘=212.0∘\theta = 180^\circ + 32.0^\circ = 212.0^\circ Then: Fx=85.0cos⁡(212.0∘)=−72.1 NF_x = 85.0 \cos(212.0^\circ) = -72.1\text{ N} Fy=85.0sin⁡(212.0∘)=−45.0 NF_y = 85.0 \sin(212.0^\circ) = -45.0\text{ N} Both methods correctly yield negative values for both components.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the component magnitudes using correct trigonometry but omits the negative signs required for the west and south directions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=85.0cos⁡(32.0∘)  ⟹  Fx=85.0(0.8480)=72.1 NF_x = 85.0\cos(32.0^\circ) \implies F_x = 85.0(0.8480) = 72.1\text{ N}

    Correct

    Fx=−85.0cos⁡(32.0∘)≈−72.1 NF_x = -85.0\cos(32.0^\circ) \approx -72.1\text{ N}

    You correctly chose the cosine function for the adjacent side (west-east), but because west corresponds to the negative xx-axis, FxF_x must be negative.

  2. Step 2

    Fy=85.0sin⁡(32.0∘)  ⟹  Fy=85.0(0.5299)=45.0 NF_y = 85.0\sin(32.0^\circ) \implies F_y = 85.0(0.5299) = 45.0\text{ N}

    Correct

    Fy=−85.0sin⁡(32.0∘)≈−45.0 NF_y = -85.0\sin(32.0^\circ) \approx -45.0\text{ N}

    You correctly used the sine function for the opposite side (south-north), but because south corresponds to the negative yy-axis, FyF_y must be negative.

  3. Step 3

    Fx=+72.1 N,Fy=+45.0 NF_x = +72.1\text{ N}, \quad F_y = +45.0\text{ N}

    Correct

    Fx=−72.1 N,Fy=−45.0 NF_x = -72.1\text{ N}, \quad F_y = -45.0\text{ N}

    A direction of 32.0∘32.0^\circ south of west lies in the third quadrant, so both Cartesian components must carry negative algebraic signs.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the right triangle formed by the vector and the horizontal axis.

You accurately paired the cosine function with the adjacent component and the sine function with the opposite component.

You performed the trigonometric calculations with correct precision and rounding.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Quadrant Sign Convention

You calculated the positive scalar side lengths of the reference triangle without mapping their directions onto the Cartesian coordinate axes.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing vector component magnitudes (which are always non-negative geometric lengths) with algebraic Cartesian components (which carry a plus or minus sign depending on whether they point along the positive or negative axis).

REASONING PATH
Your ACEpath teacher’s suggested approach
Quadrant Sign Verification
  • In standard Cartesian coordinates where +x+x is East and +y+y is North, West implies Fx<0F_x < 0 and South implies Fy<0F_y < 0 (Quadrant III).

  • Sketch the coordinate axes and arrow first to visually confirm whether each component points in the positive or negative direction before writing the final expressions.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify vector direction: 32.0∘32.0^\circ south of west points in the negative xx direction and negative yy direction.

  2. Apply negative signs to both components: Fx=−(85.0 N)cos⁡(32.0∘)=−72.1 NF_x = -(85.0\text{ N})\cos(32.0^\circ) = -72.1\text{ N}.

  3. Calculate vertical component: Fy=−(85.0 N)sin⁡(32.0∘)=−45.0 NF_y = -(85.0\text{ N})\sin(32.0^\circ) = -45.0\text{ N}.

Final answer

Fx=−72.1 NF_x = -72.1\text{ N}, Fy=−45.0 NF_y = -45.0\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the vector in its correct Cartesian quadrant before calculating components.

  • Check each directional keyword (East/North = ++, West/South = −-) to assign algebraic signs to your final components.

OverviewACEpath Teacher's Diagnosis

02 The student swaps the trigonometric functions by associating the horizontal component with sine and the vertical component with cosine.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Fx=−85.0sin⁡(32.0∘)  ⟹  Fx=−45.0 NF_x = -85.0 \sin(32.0^\circ) \implies F_x = -45.0\text{ N}

    Correct

    Fx=−85.0cos⁡(32.0∘)≈−72.1 NF_x = -85.0 \cos(32.0^\circ) \approx -72.1\text{ N}

    Because the direction is 32.0∘32.0^\circ south of west, the angle is measured relative to the west (xx-axis). The horizontal component is adjacent to this angle and requires the cosine function.

  2. Step 2

    Fy=−85.0cos⁡(32.0∘)  ⟹  Fy=−85.0(0.8480)=−72.1 NF_y = -85.0 \cos(32.0^\circ) \implies F_y = -85.0 (0.8480) = -72.1\text{ N}

    Correct

    Fy=−85.0sin⁡(32.0∘)≈−45.0 NF_y = -85.0 \sin(32.0^\circ) \approx -45.0\text{ N}

    The vertical component points south, which is opposite the 32.0∘32.0^\circ angle inside the reference right triangle, so it requires the sine function.

  3. Step 3

    Fx=−45.0 N,  Fy=−72.1 NF_x = -45.0\text{ N},\; F_y = -72.1\text{ N}

    Correct

    Fx=−72.1 N,  Fy=−45.0 NF_x = -72.1\text{ N},\; F_y = -45.0\text{ N}

    Your final values carry forward the swapped trigonometric functions from the previous steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a vector pointing south of west lies in Quadrant III and assigned negative signs to both components.

You evaluated the trigonometric values and rounded the numbers accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Function Swap

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the horizontal component with sine and the vertical component with cosine instead of identifying which leg of the right triangle is adjacent to the specified reference angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the Reference Axis
  • In the phrase "θ\theta [Direction B] of [Direction A]", the angle θ\theta is measured away from Direction A.

  • Draw Direction A along its coordinate axis first, then swing by angle θ\theta toward Direction B.

Apply SOH CAH TOA to the Components
  • The component along the reference axis is adjacent to θ\theta (uses cos⁡θ\cos\theta), while the perpendicular component is opposite θ\theta (uses sin⁡θ\sin\theta).

  • Label the adjacent and opposite legs of your vector triangle before writing down the component formulas.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the reference axis: "32.0∘32.0^\circ south of west" means the angle is adjacent to the negative xx-axis (West).

  2. Compute the horizontal component using cosine: Fx=−85.0 N⋅cos⁡(32.0∘)≈−72.1 NF_x = -85.0\text{ N} \cdot \cos(32.0^\circ) \approx -72.1\text{ N}.

  3. Compute the vertical component using sine: Fy=−85.0 N⋅sin⁡(32.0∘)≈−45.0 NF_y = -85.0\text{ N} \cdot \sin(32.0^\circ) \approx -45.0\text{ N}.

Final answer

Fx=−72.1 N,  Fy=−45.0 NF_x = -72.1\text{ N},\; F_y = -45.0\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the vector on Cartesian axes and shade the right triangle formed with the nearest axis before calculating.

  • Check that the component adjacent to an angle smaller than 45∘45^\circ has a larger magnitude than the opposite component.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets south of west as having a positive x-component, incorrectly making F_x positive while keeping F_y negative.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fx=85.0cos⁡(32.0∘)  ⟹  Fx=85.0(0.8480)=72.1 NF_x = 85.0 \cos(32.0^\circ) \implies F_x = 85.0(0.8480) = 72.1\text{ N}

    Correct

    Fx=−85.0cos⁡(32.0∘)≈−72.1 NF_x = -85.0 \cos(32.0^\circ) \approx -72.1\text{ N}

    A direction pointing 'west' lies along the negative xx-axis, so the horizontal component must carry a negative algebraic sign.

  2. Step 2

    Fy=−85.0sin⁡(32.0∘)  ⟹  Fy=−85.0(0.5299)=−45.0 NF_y = -85.0 \sin(32.0^\circ) \implies F_y = -85.0(0.5299) = -45.0\text{ N}

  3. Step 3

    Fx=72.1 N,Fy=−45.0 NF_x = 72.1\text{ N}, F_y = -45.0\text{ N}

    Correct

    Fx=−72.1 N,Fy=−45.0 NF_x = -72.1\text{ N}, F_y = -45.0\text{ N}

    This final statement carries over the sign error from your first step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the cosine of 32.0∘32.0^\circ for the adjacent horizontal component and the sine of 32.0∘32.0^\circ for the opposite vertical component.

You evaluated the trigonometric values accurately to three significant figures.

You correctly identified that the vertical component points south and gave FyF_y a negative sign.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error on Horizontal Component

You treated the west component as positive instead of negative along the standard Cartesian axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely assigned the sign manually based on 'south' being negative without checking that 'west' also lies along the negative direction (the third quadrant, where both xx and yy are negative).

REASONING PATH
Your ACEpath teacher’s suggested approach
Map Compass Headings to Quadrants
  • East is +x+x, West is −x-x, North is +y+y, and South is −y-y. Any vector in the 'south of west' or 'west of south' sector lies in Quadrant III, where both components are negative.

  • Sketch a quick set of axes and draw the vector into Quadrant III before calculating values so you can verify that both Fx<0F_x < 0 and Fy<0F_y < 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. A direction of 32.0∘32.0^\circ south of west points into Quadrant III, so both the xx-component (pointing West) and yy-component (pointing South) must be negative.

  2. Assign the negative sign explicitly to the horizontal component: Fx=−85.0 N⋅cos⁡(32.0∘)=−72.1 NF_x = -85.0\text{ N} \cdot \cos(32.0^\circ) = -72.1\text{ N}.

Final answer

Fx=−72.1 NF_x = -72.1\text{ N}, Fy=−45.0 NF_y = -45.0\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always sketch the vector on a Cartesian grid with labeled East/West (xx) and North/South (yy) axes before resolving components.

  • Check each component's sign against its quadrant: Quadrant I (+,+)(+,+), Quadrant II (−,+)(-,+), Quadrant III (−,−)(-,-), Quadrant IV (+,−)(+,-).

Lock it in

Similar question

01

A tension force of magnitude 50.0 N50.0\text{ N} acts on an anchor in a direction 40.0∘40.0^\circ north of west. Taking east as +x+x and north as +y+y, find the components TxT_x and TyT_y.

Answer

Tx=−50.0cos⁡(40.0∘)≈−38.3 NT_x = -50.0\cos(40.0^\circ) \approx -38.3\text{ N}, Ty=+50.0sin⁡(40.0∘)≈+32.1 NT_y = +50.0\sin(40.0^\circ) \approx +32.1\text{ N}. Key step: West implies a negative xx-component, while North implies a positive yy-component (Quadrant II).

02

An aircraft flies with a velocity of 220 km/h220\text{ km/h} at a heading of 65.0∘65.0^\circ west of south. Express its velocity components vxv_x and vyv_y in a standard Cartesian system where east is +x+x and north is +y+y.

Answer

vx=−220sin⁡(65.0∘)≈−199 km/hv_x = -220\sin(65.0^\circ) \approx -199\text{ km/h}, vy=−220cos⁡(65.0∘)≈−93.0 km/hv_y = -220\cos(65.0^\circ) \approx -93.0\text{ km/h}. Key step: The angle is measured relative to the south axis (negative yy), making the xx-component opposite (vx=−vsin⁡θv_x = -v\sin\theta) and the yy-component adjacent (vy=−vcos⁡θv_y = -v\cos\theta), with both negative in Quadrant III.

03

A lawnmower is pushed with a force F⃗=120 N\vec{F} = 120\text{ N} along its handle, which makes an angle of 35.0∘35.0^\circ below the horizontal forward direction. If forward is +x+x and upward is +y+y, write the force vector in component form F⃗=Fxi^+Fyj^\vec{F} = F_x\hat{i} + F_y\hat{j}.

Answer

F⃗=(98.3i^−68.8j^) N\vec{F} = (98.3\hat{i} - 68.8\hat{j})\text{ N}. Key steps: Forward is along +x+x, so Fx=+120cos⁡(35.0∘)≈+98.3 NF_x = +120\cos(35.0^\circ) \approx +98.3\text{ N}. Pushing downward points along −y-y, so Fy=−120sin⁡(35.0∘)≈−68.8 NF_y = -120\sin(35.0^\circ) \approx -68.8\text{ N}.

Loading workspace…