Resources

A student sets up a Lloyd's mirror experiment: a monochromatic point source of light (SS) with vacuum wavelength λ=600 nm\lambda = 600\text{ nm} is placed a vertical distance h=1.50 mmh = 1.50\text{ mm} above the planar surface of a horizontal polished glass mirror. A viewing screen is positioned a perpendicular distance L=2.00 mL = 2.00\text{ m} away from the source, perpendicular to the mirror plane. The point OO on the screen lies in the exact plane of the mirror surface (y=0y = 0). Contrary to classical two-source interference where the path length difference is zero at y=0y = 0, student intuition expects a bright fringe at OO. (a) Explain why point OO is actually a dark fringe (intensity minimum) rather than a bright fringe. (b) Calculate the vertical height y1y_1 above the mirror surface on the screen where the first bright interference fringe (m=1m = 1) appears in millimeters.

Answer and steps

Final answer

(a) The grazing reflected ray experiences an intrinsic phase inversion of π rad\pi\text{ rad} (180∘180^\circ) upon reflecting off the higher-index glass mirror, producing destructive interference where the path difference is zero; (b) y1=0.200 mmy_1 = 0.200\text{ mm}

Steps

Part (a): Why Point OO is a Dark Fringe

  1. Path Length Difference at the Mirror Surface: The point OO lies in the plane of the mirror surface (y=0y = 0). At this point, the path taken by the direct ray from the source SS and the path taken by the grazing reflected ray are identical in geometric length, meaning the geometric path length difference is zero: Δr=0\Delta r = 0
  2. Phase Change on Reflection: When light in an optically rarer medium (air) reflects off the boundary of an optically denser medium (glass, which has a higher refractive index nglass>nairn_{\text{glass}} > n_{\text{air}}), it undergoes a phase shift of π rad\pi\text{ rad} (equivalent to a 180∘180^\circ phase inversion or an added optical path difference of λ2\frac{\lambda}{2}).
  3. Condition for Interference at OO: The total phase difference between the direct and reflected waves at y=0y = 0 is: Δϕ=2πλΔr+π=0+π=π rad\Delta \phi = \frac{2\pi}{\lambda}\Delta r + \pi = 0 + \pi = \pi\text{ rad} Because the two waves arrive exactly out of phase, they interfere destructively, making point OO a dark fringe (intensity minimum).

Part (b): Vertical Height y1y_1 of the First Bright Fringe

  1. Equivalent Two-Source Geometry: The reflected ray appears to originate from a virtual image source S′S' located symmetrically beneath the mirror plane at a distance hh below the surface.

    • The separation between the real source SS and the virtual source S′S' is: d=2h=2(1.50 mm)=3.00 mm=3.00×10−3 md = 2h = 2(1.50\text{ mm}) = 3.00\text{ mm} = 3.00 \times 10^{-3}\text{ m}
    • Distance to the screen: L=2.00 mL = 2.00\text{ m}
    • Vacuum wavelength: λ=600 nm=6.00×10−7 m\lambda = 600\text{ nm} = 6.00 \times 10^{-7}\text{ m}
  2. Condition for Constructive Interference: In classical double-slit interference, constructive interference occurs when Δr=mλ\Delta r = m\lambda. However, due to the additional π\pi phase inversion from reflection, the condition for constructive interference (bright fringes) becomes: Δr=(m−12)λ,for m=1,2,3,…\Delta r = \left(m - \frac{1}{2}\right)\lambda, \quad \text{for } m = 1, 2, 3, \dots
  3. Relating Path Difference to Screen Position: Using the small-angle approximation (y≪Ly \ll L), the geometric path difference for a point at height yy on the screen is: Δr≈d⋅yL=2h⋅yL\Delta r \approx \frac{d \cdot y}{L} = \frac{2h \cdot y}{L}
  4. Calculating y1y_1 for the First Bright Fringe (m=1m = 1): Set m=1m = 1 in the bright-fringe condition: 2h⋅y1L=12λ\frac{2h \cdot y_1}{L} = \frac{1}{2}\lambda

    Solve for y1y_1: y1=λL4hy_1 = \frac{\lambda L}{4h}

    Substitute the given values: y1=(6.00×10−7 m)(2.00 m)4(1.50×10−3 m)=1.20×10−6 m26.00×10−3 m=2.00×10−4 my_1 = \frac{(6.00 \times 10^{-7}\text{ m})(2.00\text{ m})}{4(1.50 \times 10^{-3}\text{ m})} = \frac{1.20 \times 10^{-6}\text{ m}^2}{6.00 \times 10^{-3}\text{ m}} = 2.00 \times 10^{-4}\text{ m}

    Express in millimeters: y1=0.200 mmy_1 = 0.200\text{ mm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the separation d = h instead of 2h because they fail to account for the distance to the virtual image below the mirror plane.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Direct wave and reflected wave have equal geometric path lengths to point OO. Reflection from the denser mirror surface adds a phase shift of π\pi. Destructive interference occurs at OO because the total phase difference is π\pi.

  2. Step 2

    Condition for bright fringe with reflection phase shift is d⋅yL=(m−12)λ  ⟹  For m=1,  y1=λL2d\frac{d \cdot y}{L} = \left(m - \frac{1}{2}\right)\lambda \implies \text{For } m = 1,\; y_1 = \frac{\lambda L}{2d}

  3. Step 3

    d=1.50 mm=1.50×10−3 md = 1.50\text{ mm} = 1.50 \times 10^{-3}\text{ m}

    Correct

    d=2h=2(1.50 mm)=3.00 mm=3.00×10−3 md = 2h = 2(1.50\text{ mm}) = 3.00\text{ mm} = 3.00 \times 10^{-3}\text{ m}

    In Lloyd's mirror, the interference pattern is formed by the real source SS and its virtual image S′S' formed by reflection below the mirror plane. Because the source is at height hh above the plane, the virtual image is located at depth hh below the plane, making the separation d=2hd = 2h rather than hh.

  4. Step 4

    y1=(600×10−9 m×2.00 m)2×1.50×10−3 m=4.00×10−4 m=0.40 mmy_1 = \frac{(600 \times 10^{-9}\text{ m} \times 2.00\text{ m})}{2 \times 1.50 \times 10^{-3}\text{ m}} = 4.00 \times 10^{-4}\text{ m} = 0.40\text{ mm}

    Correct

    y1=(6.00×10−7 m)(2.00 m)2(3.00×10−3 m)=2.00×10−4 m=0.200 mmy_1 = \frac{(6.00 \times 10^{-7}\text{ m})(2.00\text{ m})}{2(3.00 \times 10^{-3}\text{ m})} = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}

    Your arithmetic was carried out correctly according to your value of dd, but the result was doubled due to the missing factor of 22 in the source separation.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated how the π\pi phase shift at reflection converts an equal-path point into a destructive interference minimum.

You adjusted the constructive interference condition by half a wavelength to account for the reflection phase shift.

You maintained proper unit conversions and algebraic manipulation throughout the solution.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Source Separation Geometry in Mirror Interference

You actually had the correct value of 0.20 mm0.20\text{ mm} written down initially, but crossed it out to replace it with 0.40 mm0.40\text{ mm} after assuming d=hd = h.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the height hh above the mirror surface as the two-source slit separation dd, overlooking the virtual image S′S' located at distance hh on the opposite side of the mirror plane, which makes the effective separation d=2hd = 2h.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Source Equivalence Check
  • Every Lloyd's mirror setup models a Young's double-slit experiment where the two coherent sources are the real source SS and its reflected virtual image S′S'.

  • Always sketch the virtual source beneath the mirror line and verify that the slit separation d=S−S′=2hd = S - S' = 2h before substituting into the fringe formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the separation between the real source SS and virtual image S′S': d=2h=2(1.50 mm)=3.00×10−3 md = 2h = 2(1.50\text{ mm}) = 3.00 \times 10^{-3}\text{ m}.

  2. Substitute d=3.00×10−3 md = 3.00 \times 10^{-3}\text{ m} into your bright fringe formula: y1=λL2d=(6.00×10−7 m)(2.00 m)2(3.00×10−3 m)y_1 = \frac{\lambda L}{2d} = \frac{(6.00 \times 10^{-7}\text{ m})(2.00\text{ m})}{2(3.00 \times 10^{-3}\text{ m})}.

  3. Evaluate the vertical position: y1=2.00×10−4 m=0.200 mmy_1 = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}.

Final answer

(a) Destructive interference occurs at OO because the grazing reflected ray undergoes an intrinsic π rad\pi\text{ rad} phase shift upon reflection at the optically denser glass mirror; (b) y1=0.200 mmy_1 = 0.200\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw both the real source and its virtual image directly under the mirror line whenever solving Lloyd's mirror problems.

  • Label the distance between the two sources explicitly as d=2hd = 2h before writing down fringe equations.

OverviewACEpath Teacher's Diagnosis

02 The student uses the standard Young's double-slit condition for bright fringes (d · y / L = mλ) by forgetting that the reflection phase shift inverts the constructive interference condition.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Geometric path difference at O is zero.   ⟹  \implies Reflection at the mirror surface causes a π\pi phase reversal.   ⟹  \implies Total phase difference is π\pi, so destructive interference forms a dark fringe at O.

  2. Step 2

    Effective separation between source and virtual image is d=2h=3.00 mmd = 2h = 3.00\text{ mm}

  3. Step 3

    First bright fringe condition is d⋅y1L=λd \cdot \frac{y_1}{L} = \lambda

    Correct

    d⋅y1L=(m−12)λ=12λd \cdot \frac{y_1}{L} = \left(m - \frac{1}{2}\right)\lambda = \frac{1}{2}\lambda

    Because the reflected beam undergoes a π\pi phase shift (equivalent to an added half-wavelength path difference), the condition for bright fringes is inverted to Δr=(m−12)λ\Delta r = \left(m - \frac{1}{2}\right)\lambda. For the first bright fringe (m=1m = 1), the geometric path difference must be 12λ\frac{1}{2}\lambda, not λ\lambda.

  4. Step 4

    y1=λLd  ⟹  y1=600×10−9 m×2.00 m3.00×10−3 m  ⟹  y1=4.00×10−4 m=0.40 mmy_1 = \frac{\lambda L}{d} \implies y_1 = \frac{600 \times 10^{-9}\text{ m} \times 2.00\text{ m}}{3.00 \times 10^{-3}\text{ m}} \implies y_1 = 4.00 \times 10^{-4}\text{ m} = 0.40\text{ mm}

    Correct

    y1=λL2d=(600×10−9 m)(2.00 m)2(3.00×10−3 m)=2.00×10−4 m=0.200 mmy_1 = \frac{\lambda L}{2d} = \frac{(600 \times 10^{-9}\text{ m})(2.00\text{ m})}{2(3.00 \times 10^{-3}\text{ m})} = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}

    Your arithmetic was carried out accurately based on your formula, but your result is twice the correct value due to the missing factor of 12\frac{1}{2} from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly explained the physical origin of the central dark fringe using the π\pi phase shift upon reflection.

You correctly treated Lloyd's mirror as an equivalent two-source system with slit separation d=2hd = 2h.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Interference Condition

You knew that reflection causes a π\pi phase shift in part (a), but you defaulted back to the standard double-slit condition Δr=mλ\Delta r = m\lambda when setting up the algebraic equation in part (b).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the interference condition for bright and dark fringes as fixed formulas (mλm\lambda vs. (m−1/2)λ(m - 1/2)\lambda) rather than deriving them from the total phase difference Δϕ=2πλΔr+ϕrefl=2mπ\Delta \phi = \frac{2\pi}{\lambda}\Delta r + \phi_{\text{refl}} = 2m\pi.

REASONING PATH
Your ACEpath teacher’s suggested approach
Constructive Condition with Boundary Shifts
  • For constructive interference (bright fringe), total phase difference must be an integer multiple of 2π2\pi: Δϕ=2πλΔr+Δϕrefl=2mπ\Delta \phi = \frac{2\pi}{\lambda}\Delta r + \Delta \phi_{\text{refl}} = 2m\pi.

  • When a π\pi phase reversal is present, substitute Δϕrefl=π\Delta \phi_{\text{refl}} = \pi to get Δr=(m−12)λ\Delta r = \left(m - \frac{1}{2}\right)\lambda.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the boundary phase change in the constructive interference condition: 2πλΔr+π=2mπ  ⟹  Δr=(m−12)λ\frac{2\pi}{\lambda}\Delta r + \pi = 2m\pi \implies \Delta r = \left(m - \frac{1}{2}\right)\lambda.

  2. Set m=1m = 1 for the first bright fringe above the mirror: d⋅y1L=12λ\frac{d \cdot y_1}{L} = \frac{1}{2}\lambda.

  3. Solve for y1y_1: y1=λL2d=λL4hy_1 = \frac{\lambda L}{2d} = \frac{\lambda L}{4h}.

  4. Substitute numerical values: y1=(600×10−9 m)(2.00 m)4(1.50×10−3 m)=0.200 mmy_1 = \frac{(600 \times 10^{-9}\text{ m})(2.00\text{ m})}{4(1.50 \times 10^{-3}\text{ m})} = 0.200\text{ mm}.

Final answer

y1=0.200 mmy_1 = 0.200\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the total phase condition Δϕ=2πλΔr+ϕboundary\Delta \phi = \frac{2\pi}{\lambda}\Delta r + \phi_{\text{boundary}} before jumping into geometric path formulas.

  • Check boundary conditions: if reflection occurs at a medium with higher index of refraction, remember that bright and dark fringe conditions swap places relative to standard Young's double-slit interference.

OverviewACEpath Teacher's Diagnosis

03 The student substitutes m = 1 into d · y / L = (m + 1/2)λ, resulting in an extra full wavelength that corresponds to the second bright fringe rather than the first.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    The geometric path difference between direct and reflected waves at OO is zero.   ⟹  \implies Reflection from the glass mirror introduces an extra half-cycle phase shift of π\pi.   ⟹  \implies The phase difference of π\pi produces complete destructive interference, making OO dark.

  2. Step 2

    Effective slit distance d=2h=3.00 mm=3.00×10−3 md = 2h = 3.00\text{ mm} = 3.00 \times 10^{-3}\text{ m}

  3. Step 3

    Bright fringe condition is d⋅y1L=(1+12)λ=1.5λd \cdot \frac{y_1}{L} = \left(1 + \frac{1}{2}\right)\lambda = 1.5\lambda

    Correct

    d⋅y1L=(1−12)λ=0.5λd \cdot \frac{y_1}{L} = \left(1 - \frac{1}{2}\right)\lambda = 0.5\lambda (or (m+12)λ(m + \frac{1}{2})\lambda with m=0m = 0)

    You substituted into (m+12)λ\left(m + \frac{1}{2}\right)\lambda with m=1m=1, giving Δr=1.5λ\Delta r = 1.5\lambda. Because the π\pi reflection phase shift already provides a half-cycle shift, the very first bright fringe (m=1m=1) above the central minimum occurs at a geometric path difference of just 0.5λ0.5\lambda.

  4. Step 4

    y1=1.5λLd=1.5×(600×10−9 m×2.00 m)3.00×10−3 m=6.00×10−4 m=0.60 mmy_1 = \frac{1.5\lambda L}{d} = \frac{1.5 \times (600 \times 10^{-9}\text{ m} \times 2.00\text{ m})}{3.00 \times 10^{-3}\text{ m}} = 6.00 \times 10^{-4}\text{ m} = 0.60\text{ mm}

    Correct

    y1=0.5λLd=0.5×(6.00×10−7 m)(2.00 m)3.00×10−3 m=2.00×10−4 m=0.200 mmy_1 = \frac{0.5\lambda L}{d} = \frac{0.5 \times (6.00 \times 10^{-7}\text{ m})(2.00\text{ m})}{3.00 \times 10^{-3}\text{ m}} = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}

    Your algebraic manipulation and arithmetic substitutions were fully accurate, but the numerical answer is three times too large because of the fringe index error in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly articulated the mechanism of phase reversal upon external reflection from a denser medium.

You accurately determined the separation of the equivalent double-slit sources as d=2hd = 2h.

You carried out the units conversion and final numerical calculation cleanly and correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fringe order indexing error with half-cycle phase shift

You evaluated (1+1/2)λ=1.5λ(1 + 1/2)\lambda = 1.5\lambda instead of (1−1/2)λ=0.5λ(1 - 1/2)\lambda = 0.5\lambda for the first bright fringe.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When shifting from classical double-slit interference to an inverted fringe pattern (where the center is dark), the condition for bright fringes changes to Δr=(m−1/2)λ\Delta r = (m - 1/2)\lambda for m=1,2,3,…m = 1, 2, 3, \dots, or (m+1/2)λ(m + 1/2)\lambda starting at index m=0m = 0. Plugging m=1m=1 into the (m+1/2)λ(m + 1/2)\lambda formula skips the first bright fringe and gives the second bright fringe.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the lowest non-zero geometric path difference
  • In Lloyd's mirror, the geometric path difference starts at Δr=0\Delta r = 0 at the surface and increases continuously with height yy.

  • Check whether your chosen path difference Δr\Delta r is the smallest positive value that produces constructive interference: with a π\pi shift, this is λ2\frac{\lambda}{2}, not 3λ2\frac{3\lambda}{2}.

Count fringes sequentially from the mirror plane
  • At y=0y = 0, Δr=0\Delta r = 0 (dark, m=0m=0). The adjacent bright fringe occurs at Δr=0.5λ\Delta r = 0.5\lambda (m=1m=1). The next dark fringe is at Δr=1.0λ\Delta r = 1.0\lambda, and the second bright fringe is at Δr=1.5λ\Delta r = 1.5\lambda (m=2m=2).

  • List the sequence of fringe path differences starting from the surface (0,0.5λ,1.0λ,1.5λ,…0, 0.5\lambda, 1.0\lambda, 1.5\lambda, \dots) to verify your fringe order.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the constructive interference condition accounting for the π\pi phase shift: Δr=(m−12)λ\Delta r = \left(m - \frac{1}{2}\right)\lambda.

  2. For the first bright fringe above the mirror surface, set m=1m = 1: Δr1=12λ\Delta r_1 = \frac{1}{2}\lambda.

  3. Equate this to the geometric path difference: d⋅y1L=λ2\frac{d \cdot y_1}{L} = \frac{\lambda}{2}.

  4. Solve for y1y_1: y1=λL2d=λL4hy_1 = \frac{\lambda L}{2d} = \frac{\lambda L}{4h}.

  5. Substitute the values: y1=(6.00×10−7 m)(2.00 m)4(1.50×10−3 m)=2.00×10−4 m=0.200 mmy_1 = \frac{(6.00 \times 10^{-7}\text{ m})(2.00\text{ m})}{4(1.50 \times 10^{-3}\text{ m})} = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}.

Final answer

(a) Destructive interference occurs at OO because the zero geometric path difference is combined with a π\pi phase reversal upon reflection off the glass; (b) y1=0.200 mmy_1 = 0.200\text{ mm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the first two or three terms of the fringe sequence (Δr=0.5λ,1.5λ,… )(\Delta r = 0.5\lambda, 1.5\lambda, \dots) when working with phase-shifted interferometers to avoid off-by-one errors in fringe numbering.

  • Double-check fringe spacing: the first bright fringe must be located at half of the regular fringe spacing Δy=λLd\Delta y = \frac{\lambda L}{d} above the mirror surface.

Lock it in

Similar question

01

In a Lloyd's mirror setup, a monochromatic source with λ=500 nm\lambda = 500\text{ nm} is placed at height h=1.00 mmh = 1.00\text{ mm} above a horizontal mirror. The screen is placed at a distance L=1.60 mL = 1.60\text{ m} from the source. Calculate the vertical position y1y_1 of the first bright fringe above the mirror surface.

Answer

y1=0.200 mmy_1 = 0.200\text{ mm}. The effective source separation is d=2h=2.00 mm=2.00×10−3 md = 2h = 2.00\text{ mm} = 2.00 \times 10^{-3}\text{ m}. For the first bright fringe with a π\pi phase shift, Δr=dy1L=λ2  ⟹  y1=λL2d=(5.00×10−7 m)(1.60 m)2(2.00×10−3 m)=2.00×10−4 m=0.200 mm\Delta r = \frac{d y_1}{L} = \frac{\lambda}{2} \implies y_1 = \frac{\lambda L}{2d} = \frac{(5.00 \times 10^{-7}\text{ m})(1.60\text{ m})}{2(2.00 \times 10^{-3}\text{ m})} = 2.00 \times 10^{-4}\text{ m} = 0.200\text{ mm}.

02

In a Lloyd's mirror experiment, the distance between adjacent bright fringes on a viewing screen placed 2.50 m2.50\text{ m} away is found to be Δy=0.350 mm\Delta y = 0.350\text{ mm} using light of wavelength λ=560 nm\lambda = 560\text{ nm}. Determine the height hh of the point source above the mirror surface.

Answer

h=1.00 mmh = 1.00\text{ mm}. Fringe width is Δy=λLd\Delta y = \frac{\lambda L}{d}, where d=2hd = 2h. Thus 2h=λLΔy=(560×10−9 m)(2.50 m)0.350×10−3 m=4.00×10−3 m=4.00 mm2h = \frac{\lambda L}{\Delta y} = \frac{(560 \times 10^{-9}\text{ m})(2.50\text{ m})}{0.350 \times 10^{-3}\text{ m}} = 4.00 \times 10^{-3}\text{ m} = 4.00\text{ mm}. Therefore, h=d2=2.00 mmh = \frac{d}{2} = 2.00\text{ mm}.

03

A point source with λ=640 nm\lambda = 640\text{ nm} is located h=0.80 mmh = 0.80\text{ mm} above a glass mirror. A screen is positioned at L=1.80 mL = 1.80\text{ m}. Find the vertical height y2y_2 of the second bright fringe (m=2m = 2) above the mirror surface.

Answer

y2=1.08 mmy_2 = 1.08\text{ mm}. The effective source separation is d=2h=1.60 mmd = 2h = 1.60\text{ mm}. For constructive interference, dymL=(m−12)λ\frac{d y_m}{L} = \left(m - \frac{1}{2}\right)\lambda. For m=2m = 2, dy2L=32λ  ⟹  y2=3λL2d=3(6.40×10−7 m)(1.80 m)2(1.60×10−3 m)=1.08×10−3 m=1.08 mm\frac{d y_2}{L} = \frac{3}{2}\lambda \implies y_2 = \frac{3\lambda L}{2d} = \frac{3(6.40 \times 10^{-7}\text{ m})(1.80\text{ m})}{2(1.60 \times 10^{-3}\text{ m})} = 1.08 \times 10^{-3}\text{ m} = 1.08\text{ mm}.

Loading workspace…