Resources

An electric centrifuge rotor accelerates from rest to an operating angular velocity of ω=420 rad/s\omega = 420\text{ rad/s} and maintains this constant speed. Calculate (a) the rotational frequency ff of the rotor in hertz (Hz\text{Hz}) and (b) the period of rotation TT in seconds (s\text{s}).

Answer and steps

Final answer

(a) f=66.8 Hzf = 66.8\text{ Hz}; (b) T=0.0150 sT = 0.0150\text{ s}

Steps

Part (a): Calculate the Rotational Frequency (ff)

  1. Relate angular velocity to frequency:
    One full revolution covers an angular displacement of 2π radians2\pi\text{ radians}. The angular velocity ω\omega in radians per second (rad/s\text{rad/s}) is related to the rotational frequency ff in hertz (Hz\text{Hz}, or revolutions per second) by: ω=2πf\omega = 2\pi f
  2. Solve for ff:
    f=ω2πf = \frac{\omega}{2\pi}
  3. Substitute the given value:
    f=420 rad/s2π≈66.845 Hz≈66.8 Hzf = \frac{420\text{ rad/s}}{2\pi} \approx 66.845\text{ Hz} \approx 66.8\text{ Hz}

Part (b): Calculate the Period of Rotation (TT)

  1. Relate period to frequency and angular velocity:
    The period TT is the time required to complete one full revolution. It is the reciprocal of the frequency: T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}
  2. Substitute the values:
    T=166.845 Hz≈0.01496 s≈0.0150 sT = \frac{1}{66.845\text{ Hz}} \approx 0.01496\text{ s} \approx 0.0150\text{ s}

Common Pitfall to Avoid

  • Do not confuse angular speed ω\omega with rotational frequency ff. Angular speed measures the angle swept per unit time in radians per second, while frequency measures full cycles or turns per unit time in hertz (s−1\text{s}^{-1}). Always include the factor of 2π2\pi to convert between radians and complete cycles.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses frequency and angular velocity by multiplying by 2π instead of dividing, which then carries forward into the period calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=2π⋅ω  ⟹  f=2π⋅420  ⟹  f≈2638.9 Hzf = 2\pi \cdot \omega \implies f = 2\pi \cdot 420 \implies f \approx 2638.9\text{ Hz}

    Correct

    f=ω2π=420 rad/s2π≈66.8 Hzf = \frac{\omega}{2\pi} = \frac{420\text{ rad/s}}{2\pi} \approx 66.8\text{ Hz}

    You multiplied the angular velocity by 2π2\pi rather than dividing by it. Because one complete revolution equals 2π radians2\pi\text{ radians}, angular velocity and frequency are related by ω=2πf\omega = 2\pi f, which yields f=ω2πf = \frac{\omega}{2\pi}.

  2. Step 2

    T=1f  ⟹  T=12638.9  ⟹  T≈0.000379 sT = \frac{1}{f} \implies T = \frac{1}{2638.9} \implies T \approx 0.000379\text{ s}

    Correct

    T=1f=2πω=2π420 rad/s≈0.0150 sT = \frac{1}{f} = \frac{2\pi}{\omega} = \frac{2\pi}{420\text{ rad/s}} \approx 0.0150\text{ s}

    You correctly applied the relationship T=1fT = \frac{1}{f}, but this step inherited the erroneous frequency value calculated in Part (a).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the period TT is the reciprocal of the rotational frequency ff.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Inversion

You multiplied by 2π2\pi instead of dividing by 2π2\pi when solving for frequency ff from angular velocity ω\omega.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the conversion between complete revolutions (cycles) and radians. Since each full rotation encompasses 2π radians2\pi\text{ radians}, the angle swept per second (ω\omega) must be 2π2\pi times larger than the number of revolutions per second (ff), meaning ω=2πf\omega = 2\pi f, so f=ω2πf = \frac{\omega}{2\pi}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relating Frequency and Angular Velocity
  • ω=2πf  ⟺  f=ω2π\omega = 2\pi f \iff f = \frac{\omega}{2\pi}

  • Check units: rad/s\text{rad/s} divided by rad/rev\text{rad/rev} gives rev/s\text{rev/s} (Hz\text{Hz}). If your frequency ends up larger than your angular speed in rad/s, you multiplied by 2π2\pi by mistake.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve for frequency: f=ω2π=4202π≈66.845 Hz≈66.8 Hzf = \frac{\omega}{2\pi} = \frac{420}{2\pi} \approx 66.845\text{ Hz} \approx 66.8\text{ Hz}

  2. Substitute ff into the period formula: T=1f=166.845≈0.0150 sT = \frac{1}{f} = \frac{1}{66.845} \approx 0.0150\text{ s}

Final answer

(a) f≈66.8 Hzf \approx 66.8\text{ Hz}; (b) T≈0.0150 sT \approx 0.0150\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the fundamental definition ω=2πf\omega = 2\pi f first before isolating the unknown variable.

  • Perform a quick unit and magnitude check: since 2π≈6.28>12\pi \approx 6.28 > 1, the value of ω\omega (in rad/s\text{rad/s}) should always be about six times greater than ff (in Hz\text{Hz}).

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2π and assumes angular velocity in rad/s is numerically equal to frequency in Hz.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=420 Hzf = 420\text{ Hz}

    Correct

    f=ω2π=420 rad/s2π≈66.8 Hzf = \frac{\omega}{2\pi} = \frac{420\text{ rad/s}}{2\pi} \approx 66.8\text{ Hz}

    You equated frequency directly to the given angular velocity. Angular velocity ω\omega is measured in radians per second, whereas frequency ff is measured in complete revolutions per second (hertz). Since one revolution equals 2π rad2\pi\text{ rad}, the correct formula is f=ω2πf = \frac{\omega}{2\pi}.

  2. Step 2

    T=1f  ⟹  T=1420  ⟹  T≈0.00238 sT = \frac{1}{f} \implies T = \frac{1}{420} \implies T \approx 0.00238\text{ s}

    Correct

    T=1f=2πω=2π420 rad/s≈0.0150 sT = \frac{1}{f} = \frac{2\pi}{\omega} = \frac{2\pi}{420\text{ rad/s}} \approx 0.0150\text{ s}

    Your formula T=1fT = \frac{1}{f} and reciprocal calculation were executed properly, but the result is inaccurate because it carries forward the incorrect frequency from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that period and frequency are reciprocals of each other (T=1fT = \frac{1}{f}).

You performed the reciprocal arithmetic accurately for your stated value.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating angular velocity with rotational frequency

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated angular speed ω\omega (measured in rad/s\text{rad/s}) with cyclic frequency ff (measured in Hz\text{Hz} or rev/s\text{rev/s}), omitting the conversion factor of 2π rad/rev2\pi\text{ rad/rev}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit and Concept Check
  • Angular velocity ω\omega has units of rad/s\text{rad/s}, whereas rotational frequency ff has units of rev/s\text{rev/s} (or Hz\text{Hz}).

  • Always check whether the given rate is in radians per second or revolutions per second before substituting.

Conversion Factor
  • 1 rev=2π rad1\text{ rev} = 2\pi\text{ rad}, so ω=2πf\omega = 2\pi f and f=ω2πf = \frac{\omega}{2\pi}.

  • Divide by 2π2\pi to convert rad/s\text{rad/s} to Hz\text{Hz}, or multiply by 2π2\pi to convert Hz\text{Hz} to rad/s\text{rad/s}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert angular velocity to frequency: f=ω2π=420 rad/s2π≈66.845 Hz≈66.8 Hzf = \frac{\omega}{2\pi} = \frac{420\text{ rad/s}}{2\pi} \approx 66.845\text{ Hz} \approx 66.8\text{ Hz}.

  2. Calculate the period from frequency or angular velocity: T=1f=2πω=2π420 rad/s≈0.01496 s≈0.0150 sT = \frac{1}{f} = \frac{2\pi}{\omega} = \frac{2\pi}{420\text{ rad/s}} \approx 0.01496\text{ s} \approx 0.0150\text{ s}.

Final answer

(a) f≈66.8 Hzf \approx 66.8\text{ Hz}; (b) T≈0.0150 sT \approx 0.0150\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between radians (angle) and cycles (full turns).

  • Write down the unit chain explicitly whenever working with rotational motion: rad/s→÷2πrev/s (Hz)→reciprocals\text{rad/s} \xrightarrow{\div 2\pi} \text{rev/s (Hz)} \xrightarrow{\text{reciprocal}} \text{s}.

OverviewACEpath Teacher's Diagnosis

03 The student correctly calculates frequency but inverts the relation for period, writing T = f instead of T = 1 / f.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f=ω2π  ⟹  f=4202π  ⟹  f≈66.85 Hzf = \frac{\omega}{2\pi} \implies f = \frac{420}{2\pi} \implies f \approx 66.85\text{ Hz}

  2. Step 2

    T=fT = f

    Correct

    T=1f=2πωT = \frac{1}{f} = \frac{2\pi}{\omega}

    Period and frequency are inversely related because period is time per revolution, whereas frequency is revolutions per unit time.

  3. Step 3

    T=66.85 sT = 66.85\text{ s}

    Correct

    T=166.85 Hz≈0.0150 sT = \frac{1}{66.85\text{ Hz}} \approx 0.0150\text{ s}

    Because of the inverted relationship in the previous step, your numerical period has the same value as the frequency rather than its reciprocal.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor of 2π radians2\pi\text{ radians} per cycle to connect angular velocity ω\omega to rotational frequency ff.

You calculated the numerical value of ff with accurate arithmetic and proper units of hertz.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal relationship error

You set period equal to frequency (T=fT = f) instead of taking the reciprocal.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing rate (cycles per second) with interval (seconds per cycle). When an object spins rapidly, the frequency is large, so the time needed for one single turn must be very small.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reciprocal Definition of Period and Frequency
  • T=1fT = \frac{1}{f} and f=1Tf = \frac{1}{T}

  • Always verify that their product equals 11: T×f=1T \times f = 1.

Unit and Magnitude Check
  • Frequency has units of s−1\text{s}^{-1} (Hz\text{Hz}) while period has units of s\text{s}.

  • If a machine completes tens or hundreds of revolutions per second (f>1f > 1), each revolution must take a fraction of a second (T<1T < 1).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the reciprocal formula: T=1fT = \frac{1}{f}.

  2. Substitute your calculated frequency: T=166.845 HzT = \frac{1}{66.845\text{ Hz}}.

  3. Evaluate the quotient: T≈0.0150 sT \approx 0.0150\text{ s}.

Final answer

(a) f≈66.8 Hzf \approx 66.8\text{ Hz}; (b) T≈0.0150 sT \approx 0.0150\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definitions of period and frequency to reinforce why they are inverse quantities.

  • Practice checking physical plausibility: high rotational speed must mean a tiny period per turn.

Lock it in

Similar question

01

A hard drive platter spins with a constant angular velocity of ω=754 rad/s\omega = 754\text{ rad/s}. Determine (a) its rotational frequency ff in hertz and (b) its period of rotation TT in milliseconds.

Answer

(a) f=ω2π=7542π≈120 Hzf = \frac{\omega}{2\pi} = \frac{754}{2\pi} \approx 120\text{ Hz}. (b) T=1f=1120 s−1≈0.00833 s=8.33 msT = \frac{1}{f} = \frac{1}{120\text{ s}^{-1}} \approx 0.00833\text{ s} = 8.33\text{ ms}.

02

An optical disc player takes 0.025 s0.025\text{ s} to complete one full revolution. Find (a) the rotational frequency ff in hertz and (b) the angular velocity ω\omega in radians per second.

Answer

(a) f=1T=10.025 s=40 Hzf = \frac{1}{T} = \frac{1}{0.025\text{ s}} = 40\text{ Hz}. (b) ω=2πf=2π(40 Hz)=80π rad/s≈251.3 rad/s\omega = 2\pi f = 2\pi (40\text{ Hz}) = 80\pi\text{ rad/s} \approx 251.3\text{ rad/s}.

03

A wind turbine blade rotates at a steady rate, completing 18 revolutions per minute (rpm)18\text{ revolutions per minute (rpm)}. Compute (a) its frequency ff in hertz, (b) its angular velocity ω\omega in radians per second, and (c) its rotational period TT in seconds.

Answer

(a) f=18 rev60 s=0.30 Hzf = \frac{18\text{ rev}}{60\text{ s}} = 0.30\text{ Hz}. (b) ω=2πf=2π(0.30)=0.60π rad/s≈1.88 rad/s\omega = 2\pi f = 2\pi (0.30) = 0.60\pi\text{ rad/s} \approx 1.88\text{ rad/s}. (c) T=1f=10.30 Hz≈3.33 sT = \frac{1}{f} = \frac{1}{0.30\text{ Hz}} \approx 3.33\text{ s}.

Loading workspace…