Resources

A sealed container holds a substance in a state where particles are arranged in a regular, tightly packed three-dimensional crystal lattice, vibrating about fixed equilibrium positions with an average spacing of d=2.82×10−10 md = 2.82 \times 10^{-10}\text{ m}. When thermal energy is added at constant atmospheric pressure, the substance undergoes a transition to a state where particles maintain close proximity (average spacing d′≈2.95×10−10 md' \approx 2.95 \times 10^{-10}\text{ m}) but can slide freely past one another without long-range periodic order. Finally, further heating causes the substance to expand until the average intermolecular separation reaches D=3.40×10−9 mD = 3.40 \times 10^{-9}\text{ m}. (a) Identify the state of matter (solid, liquid, or gas) corresponding to each of the three regimes. (b) Calculate the ratio of the number density (particles per cubic meter, n=NV≈1d3n = \frac{N}{V} \approx \frac{1}{d^3}) of the initial state to the final dilute state.

Answer and steps

Final answer

(a) Initial state: Solid; Intermediate state: Liquid; Final state: Gas. (b) Ratio of number densities: nsolidngas≈1.75×103\frac{n_{\text{solid}}}{n_{\text{gas}}} \approx 1.75 \times 10^3 (or 17501750).

Steps

Part (a): Identifying the States of Matter

The microscopic arrangement and motion of constituent particles define the macroscopic states of matter:

  1. Initial State — Solid:

    • Observation: The particles are arranged in a fixed, regular, periodic three-dimensional lattice and only vibrate about equilibrium positions, maintaining a small spacing (d=2.82×10−10 md = 2.82 \times 10^{-10}\text{ m}).
    • Conclusion: This rigidity, fixed volume, and long-range geometric order are the defining microscopic characteristics of a solid.
  2. Intermediate State — Liquid:

    • Observation: The particles remain closely packed (d′≈2.95×10−10 md' \approx 2.95 \times 10^{-10}\text{ m}, only slightly larger than in the solid), but they have acquired enough thermal energy to break the rigid lattice bonds, allowing them to flow and slide past one another without long-range order.
    • Conclusion: Having a definite volume while lacking a fixed shape defines a liquid.
  3. Final State — Gas:

    • Observation: The average intermolecular separation increases by an order of magnitude to D=3.40×10−9 mD = 3.40 \times 10^{-9}\text{ m}, indicating that particles are separated by vast empty space compared to their size and move independently.
    • Conclusion: The absence of fixed shape and volume due to large particle separation defines a gas.

Part (b): Calculating the Ratio of Number Densities

  1. Relate Number Density to Particle Spacing: The average volume occupied by a single particle in a three-dimensional medium is approximately the cube of the average separation distance: vparticle≈d3v_{\text{particle}} \approx d^3 Therefore, the number density nn (particles per unit volume) is inversely proportional to the cube of the separation distance: n=NV≈1d3n = \frac{N}{V} \approx \frac{1}{d^3}
  2. Set up the Ratio: Using d=2.82×10−10 md = 2.82 \times 10^{-10}\text{ m} for the solid and D=3.40×10−9 mD = 3.40 \times 10^{-9}\text{ m} for the gas: nsolidngas=1d31D3=(Dd)3\frac{n_{\text{solid}}}{n_{\text{gas}}} = \frac{\frac{1}{d^3}}{\frac{1}{D^3}} = \left(\frac{D}{d}\right)^3
  3. Compute the Numerical Value: First, find the ratio of the linear separations: Dd=3.40×10−9 m2.82×10−10 m=3.400.282≈12.06\frac{D}{d} = \frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}} = \frac{3.40}{0.282} \approx 12.06

    Next, cube this linear ratio to find the volume/density ratio: nsolidngas≈(12.06)3≈1.75×103(or 1750)\frac{n_{\text{solid}}}{n_{\text{gas}}} \approx (12.06)^3 \approx 1.75 \times 10^3\quad (\text{or } 1750)

Common Pitfall: Forgetting to cube the distance ratio is a frequent error. Because density is a volumetric property (V∝d3V \propto d^3), an increase in average particle spacing by a factor of roughly 1212 decreases the number density by a factor of 123≈175012^3 \approx 1750.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the ratio of particle spacings linearly instead of cubing the ratio to find the ratio of 3D number densities.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Initial state: solid Intermediate state: liquid Final state: gas

  2. Step 2

    n=1dn = \frac{1}{d}

    Correct

    n≈1d3n \approx \frac{1}{d^3}

    You defined number density using a one-dimensional spacing n=1dn = \frac{1}{d}. Because particles occupy three-dimensional space, each particle occupies an approximate volume of v≈d3v \approx d^3, making number density n=NV≈1d3n = \frac{N}{V} \approx \frac{1}{d^3}.

  3. Step 3

    Ratio=Dd  ⟹  Ratio=3.40×10−9 m2.82×10−10 m=12.1\text{Ratio} = \frac{D}{d} \implies \text{Ratio} = \frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}} = 12.1

    Correct

    nsolidngas=1/d31/D3=(Dd)3≈(12.06)3≈1.75×103\frac{n_{\text{solid}}}{n_{\text{gas}}} = \frac{1/d^3}{1/D^3} = \left(\frac{D}{d}\right)^3 \approx (12.06)^3 \approx 1.75 \times 10^3

    Because you omitted the cube power in the density definition, you evaluated the linear separation ratio Dd≈12.1\frac{D}{d} \approx 12.1 instead of cubing it to find the volumetric number density ratio.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified all three states of matter based on particle arrangement and motion.

You correctly set up the inverse relationship between density and separation distance.

You accurately calculated the linear distance ratio Dd≈12.1\frac{D}{d} \approx 12.1 from the given values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear vs. Volumetric Scaling Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated number density as a linear quantity proportional to 1d\frac{1}{d} rather than a volumetric property proportional to 1d3\frac{1}{d^3}, forgetting to cube the linear separation factor when working in three dimensions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Linear Separation vs. Volume
  • In three dimensions, the average volume occupied per particle scales as v∝d3v \propto d^3, so number density is n=NV≈1d3n = \frac{N}{V} \approx \frac{1}{d^3}.

  • Always check the physical dimensions of density: per cubic meter (m−3\text{m}^{-3}) requires dividing by volume (d3d^3), not linear length (dd).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the volumetric number density: nsolid≈1d3n_{\text{solid}} \approx \frac{1}{d^3} and ngas≈1D3n_{\text{gas}} \approx \frac{1}{D^3}.

  2. Form the ratio: nsolidngas=1/d31/D3=(Dd)3\frac{n_{\text{solid}}}{n_{\text{gas}}} = \frac{1/d^3}{1/D^3} = \left(\frac{D}{d}\right)^3.

  3. Substitute the values: (3.40×10−9 m2.82×10−10 m)3≈(12.06)3≈1.75×103\left(\frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}}\right)^3 \approx (12.06)^3 \approx 1.75 \times 10^3.

Final answer

(a) Initial: Solid, Intermediate: Liquid, Final: Gas; (b) nsolidngas≈1.75×103\frac{n_{\text{solid}}}{n_{\text{gas}}} \approx 1.75 \times 10^3 (or 17501750)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how physical quantities scale with dimension: length (LL), area (L2L^2), and volume (L3L^3).

  • Practice questions converting between linear spacing and 3D density to make cubing second nature.

OverviewACEpath Teacher's Diagnosis

02 The student inverts the ratio and calculates the ratio of final to initial number density instead of initial to final.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Initial state : solid Intermediate state : liquid Final state : gas

  2. Step 2

    Ratio=nfinalninitial=(dD)3\text{Ratio} = \frac{n_{\text{final}}}{n_{\text{initial}}} = \left(\frac{d}{D}\right)^3

    Correct

    Ratio=ninitialnfinal=1/d31/D3=(Dd)3\text{Ratio} = \frac{n_{\text{initial}}}{n_{\text{final}}} = \frac{1/d^3}{1/D^3} = \left(\frac{D}{d}\right)^3

    The prompt asked for the ratio of the initial state to the final state, which means ninitialnfinal\frac{n_{\text{initial}}}{n_{\text{final}}}. You wrote the inverse ratio, nfinalninitial\frac{n_{\text{final}}}{n_{\text{initial}}}.

  3. Step 3

    Ratio=(2.82×10−103.40×10−9)3=(0.0829)3=5.70×10−4\text{Ratio} = \left(\frac{2.82 \times 10^{-10}}{3.40 \times 10^{-9}}\right)^3 = (0.0829)^3 = 5.70 \times 10^{-4}

    Correct

    Ratio=(3.40×10−9 m2.82×10−10 m)3≈(12.06)3≈1.75×103\text{Ratio} = \left(\frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}}\right)^3 \approx (12.06)^3 \approx 1.75 \times 10^3

    Your arithmetic was accurate for your chosen fraction, but the numerical answer is the reciprocal of the requested quantity because the initial fraction was inverted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the physical regimes into solid, liquid, and gas based on microscopic order and particle mobility.

You correctly recognized that number density is inversely proportional to the cube of the average separation distance (n≈1d3n \approx \frac{1}{d^3}).

You computed the powers of ten and cube values accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted ratio setup

You calculated the ratio of final density to initial density rather than initial density to final density.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Reversing the antecedent and consequent when translating the verbal phrase 'ratio of A to B' into mathematical fraction form AB\frac{A}{B}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Parsing 'Ratio of A to B'
  • The phrase 'ratio of AA to BB' always translates algebraically to AB\frac{A}{B}, where the first quantity named is the numerator.

  • Underline 'initial' and 'final' in the prompt and immediately write ninitialnfinal\frac{n_{\text{initial}}}{n_{\text{final}}} before substituting formulas.

Physical Reality Check for Dilution
  • A solid is far denser than a dilute gas, so the ratio nsolidngas\frac{n_{\text{solid}}}{n_{\text{gas}}} must be much greater than 11.

  • Inspect your final value: a number much less than 11 signals that you computed the gas-to-solid ratio instead.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the requested ratio of initial to final number density: ninitialnfinal=1/d31/D3=(Dd)3\frac{n_{\text{initial}}}{n_{\text{final}}} = \frac{1/d^3}{1/D^3} = \left(\frac{D}{d}\right)^3.

  2. Substitute the given separation distances: Dd=3.40×10−9 m2.82×10−10 m≈12.057\frac{D}{d} = \frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}} \approx 12.057.

  3. Cube the linear spacing ratio: (12.057)3≈1.75×103(12.057)^3 \approx 1.75 \times 10^3.

Final answer

ninitialnfinal≈1.75×103\frac{n_{\text{initial}}}{n_{\text{final}}} \approx 1.75 \times 10^3 (or 17501750)

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice translating verbal ratio prompts by explicitly writing Ratio=first quantitysecond quantity\text{Ratio} = \frac{\text{first quantity}}{\text{second quantity}} before doing any algebra.

  • Perform a sanity check on the magnitude: when comparing a tightly packed state (solid) to an expanded state (gas), the ratio of solid to gas density must be significantly greater than 11.

OverviewACEpath Teacher's Diagnosis

03 The student compares the initial solid state to the intermediate liquid state instead of the final dilute gaseous state.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Initial: solid,  Intermediate: liquid,  Final: gas\text{Initial: solid},\; \text{Intermediate: liquid},\; \text{Final: gas}

  2. Step 2

    Ratio=(d′d)3  ⟹  Ratio=(2.95×10−10 m2.82×10−10 m)3  ⟹  Ratio=(1.046)3=1.14\text{Ratio} = \left(\frac{d'}{d}\right)^3 \implies \text{Ratio} = \left(\frac{2.95 \times 10^{-10}\text{ m}}{2.82 \times 10^{-10}\text{ m}}\right)^3 \implies \text{Ratio} = (1.046)^3 = 1.14

    Correct

    nsolidngas=1/d31/D3=(Dd)3=(3.40×10−9 m2.82×10−10 m)3≈1.75×103\frac{n_{\text{solid}}}{n_{\text{gas}}} = \frac{1/d^3}{1/D^3} = \left(\frac{D}{d}\right)^3 = \left(\frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}}\right)^3 \approx 1.75 \times 10^3

    You used the spacing for the intermediate liquid state (d′=2.95×10−10 md' = 2.95 \times 10^{-10}\text{ m}) rather than the final dilute gaseous state (D=3.40×10−9 mD = 3.40 \times 10^{-9}\text{ m}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly classified the three states of matter based on particle spacing and molecular motion.

You correctly identified that the number density ratio is proportional to the inverse ratio of particle separation cubed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
State Selection Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the intermediate liquid separation (d′d') instead of the final dilute gas separation (DD) specified by the prompt.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Target States
  • When a problem describes transitions through multiple regimes, re-read carefully to identify exactly which pair of states the question asks you to compare.

  • Check whether the requested ratio compares initial-to-intermediate or initial-to-final before substituting values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the spacing of the final dilute state: D=3.40×10−9 mD = 3.40 \times 10^{-9}\text{ m}.

  2. Set up the ratio of number densities: nsolidngas=(Dd)3\frac{n_{\text{solid}}}{n_{\text{gas}}} = \left(\frac{D}{d}\right)^3.

  3. Substitute the values: (3.40×10−9 m2.82×10−10 m)3≈(12.06)3≈1.75×103\left(\frac{3.40 \times 10^{-9}\text{ m}}{2.82 \times 10^{-10}\text{ m}}\right)^3 \approx (12.06)^3 \approx 1.75 \times 10^3.

Final answer

nsolidngas≈1.75×103\frac{n_{\text{solid}}}{n_{\text{gas}}} \approx 1.75 \times 10^3 (or 17501750)

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read multi-stage transition questions carefully to verify which specific states are being compared in quantitative parts.

  • Practice calculating volumetric and density scaling factors (V∝d3V \propto d^3, n∝d−3n \propto d^{-3}) across phase transitions.

Lock it in

Similar question

01

The average spacing between atoms in a liquid metal is d1=3.0×10−10 md_1 = 3.0 \times 10^{-10}\text{ m}. When vaporized into a dilute gas, the average spacing increases to d2=3.0×10−9 md_2 = 3.0 \times 10^{-9}\text{ m}. Calculate the ratio of the liquid's number density to the vapor's number density.

Answer

The ratio is 10001000. Key steps: nliquidngas=(d2d1)3=(3.0×10−93.0×10−10)3=103=1000\frac{n_{\text{liquid}}}{n_{\text{gas}}} = \left(\frac{d_2}{d_1}\right)^3 = \left(\frac{3.0 \times 10^{-9}}{3.0 \times 10^{-10}}\right)^3 = 10^3 = 1000.

02

A gas has a number density of n=2.7×1025 particles/m3n = 2.7 \times 10^{25}\text{ particles/m}^3. Estimate the average intermolecular distance dd between neighboring molecules.

Answer

d≈3.3×10−10 md \approx 3.3 \times 10^{-10}\text{ m}. Key steps: n≈1d3  ⟹  d≈n−1/3=(2.7×1025 m−3)−1/3=13.0×108 m−1≈3.33×10−10 mn \approx \frac{1}{d^3} \implies d \approx n^{-1/3} = (2.7 \times 10^{25}\text{ m}^{-3})^{-1/3} = \frac{1}{3.0 \times 10^8\text{ m}^{-1}} \approx 3.33 \times 10^{-10}\text{ m}.

03

A solid crystal with cubic lattice constant a=0.40 nma = 0.40\text{ nm} contains 1 atom per unit cell of volume a3a^3. Upon complete sublimation into a container at constant temperature, the gas volume is 80008000 times the original solid volume. By what factor did the average separation between atoms increase?

Answer

The average separation increased by a factor of 2020. Key steps: Vgas/Vsolid=8000V_{\text{gas}} / V_{\text{solid}} = 8000. Since volume scales with the cube of separation, D3/a3=8000  ⟹  Da=80003=20D^3 / a^3 = 8000 \implies \frac{D}{a} = \sqrt[3]{8000} = 20.

Loading workspace…