Resources

An electric dipole consists of two point charges, +q+q and −q-q, separated by a distance d=2ad = 2a along the zz-axis, centered at the origin (so +q+q is at (0,0,+a)(0, 0, +a) and −q-q is at (0,0,−a)(0, 0, -a)). (a) Write the exact algebraic expression for the electric potential V(z)V(z) at an arbitrary point on the positive zz-axis for z>az > a. (b) Using the binomial expansion (1±x)−1≈1∓x+x2(1 \pm x)^{-1} \approx 1 \mp x + x^2, determine the leading non-zero term in the asymptotic Taylor series expansion of V(z)V(z) for z≫az \gg a in terms of the dipole moment p=2qap = 2qa. (c) If q=1.60 nCq = 1.60\text{ nC} and a=1.00 mma = 1.00\text{ mm}, find the percentage error incurred when using the dipole approximation Vapprox(z)V_{\text{approx}}(z) instead of the exact formula V(z)V(z) at z=10.0 mmz = 10.0\text{ mm} and at z=100.0 mmz = 100.0\text{ mm}. Let ke=8.99×109 N⋅m2/C2k_e = 8.99 \times 10^9\text{ N}\cdot\text{m}^2/\text{C}^2.

Answer and steps

Final answer

(a) V(z)=kepz2−a2V(z) = \frac{k_e p}{z^2 - a^2}; (b) Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}; (c) At z=10.0 mmz = 10.0\text{ mm}, error is −1.00%-1.00\%; at z=100.0 mmz = 100.0\text{ mm}, error is −0.0100%-0.0100\%.

Steps

Part (a): Exact Algebraic Expression for V(z)V(z)

By the principle of superposition, the total electric potential V(z)V(z) at a point on the positive zz-axis (z>az > a) is the scalar sum of the potentials due to +q+q and −q-q:

V(z)=V++V−=keqr++ke(−q)r−V(z) = V_+ + V_- = \frac{k_e q}{r_+} + \frac{k_e (-q)}{r_-}

From the geometry along the zz-axis:

  • The distance from +q+q (at z=+az = +a) to the observation point zz is r+=z−ar_+ = z - a.
  • The distance from −q-q (at z=−az = -a) to the observation point zz is r−=z−(−a)=z+ar_- = z - (-a) = z + a.

Substituting these distances:

V(z)=keq(1z−a−1z+a)V(z) = k_e q \left(\frac{1}{z - a} - \frac{1}{z + a}\right)

Finding a common denominator:

V(z)=keq[(z+a)−(z−a)(z−a)(z+a)]=keq(2az2−a2)V(z) = k_e q \left[\frac{(z + a) - (z - a)}{(z - a)(z + a)}\right] = k_e q \left(\frac{2a}{z^2 - a^2}\right)

Since the electric dipole moment is defined as p=2qap = 2qa:

V(z)=kepz2−a2V(z) = \frac{k_e p}{z^2 - a^2}


Part (b): Leading Term for Far-Field Dipole Approximation (z≫az \gg a)

To find the asymptotic behavior at large distances, factor zz out from each term in the potential:

V(z)=keqz[(1−az)−1−(1+az)−1]V(z) = \frac{k_e q}{z} \left[\left(1 - \frac{a}{z}\right)^{-1} - \left(1 + \frac{a}{z}\right)^{-1}\right]

Applying the binomial expansion (1±x)−1≈1∓x+x2(1 \pm x)^{-1} \approx 1 \mp x + x^2 with x=az≪1x = \frac{a}{z} \ll 1:

(1−az)−1≈1+az+a2z2\left(1 - \frac{a}{z}\right)^{-1} \approx 1 + \frac{a}{z} + \frac{a^2}{z^2}

(1+az)−1≈1−az+a2z2\left(1 + \frac{a}{z}\right)^{-1} \approx 1 - \frac{a}{z} + \frac{a^2}{z^2}

Subtracting the two series:

(1−az)−1−(1+az)−1≈(1+az+a2z2)−(1−az+a2z2)=2az\left(1 - \frac{a}{z}\right)^{-1} - \left(1 + \frac{a}{z}\right)^{-1} \approx \left(1 + \frac{a}{z} + \frac{a^2}{z^2}\right) - \left(1 - \frac{a}{z} + \frac{a^2}{z^2}\right) = \frac{2a}{z}

Multiplying by the prefactor:

Vapprox(z)=keqz⋅2az=ke(2qa)z2=kepz2V_{\text{approx}}(z) = \frac{k_e q}{z} \cdot \frac{2a}{z} = \frac{k_e (2qa)}{z^2} = \frac{k_e p}{z^2}

Pitfall note: Unlike a monopole potential which falls off as 1/r1/r, the leading term of a dipole potential drops off as 1/r21/r^2 because the equal and opposite charges largely cancel each other out at great distances.


Part (c): Percentage Error Calculation

The percentage error incurred by using the approximation relative to the exact value is defined as:

Percentage Error=Vapprox(z)−V(z)V(z)×100%=(Vapprox(z)V(z)−1)×100%\text{Percentage Error} = \frac{V_{\text{approx}}(z) - V(z)}{V(z)} \times 100\% = \left(\frac{V_{\text{approx}}(z)}{V(z)} - 1\right) \times 100\%

Calculate the ratio of the approximate potential to the exact potential:

Vapprox(z)V(z)=kepz2kepz2−a2=z2−a2z2=1−(az)2\frac{V_{\text{approx}}(z)}{V(z)} = \frac{\frac{k_e p}{z^2}}{\frac{k_e p}{z^2 - a^2}} = \frac{z^2 - a^2}{z^2} = 1 - \left(\frac{a}{z}\right)^2

Therefore, the percentage error depends solely on the ratio a/za/z:

Percentage Error=−(az)2×100%\text{Percentage Error} = -\left(\frac{a}{z}\right)^2 \times 100\%

  1. At z=10.0 mmz = 10.0\text{ mm} (a=1.00 mma = 1.00\text{ mm}):

Percentage Error=−(1.00 mm10.0 mm)2×100%=−(0.100)2×100%=−1.00%\text{Percentage Error} = -\left(\frac{1.00\text{ mm}}{10.0\text{ mm}}\right)^2 \times 100\% = -(0.100)^2 \times 100\% = -1.00\%

  1. At z=100.0 mmz = 100.0\text{ mm} (a=1.00 mma = 1.00\text{ mm}):

Percentage Error=−(1.00 mm100.0 mm)2×100%=−(0.0100)2×100%=−0.0100%\text{Percentage Error} = -\left(\frac{1.00\text{ mm}}{100.0\text{ mm}}\right)^2 \times 100\% = -(0.0100)^2 \times 100\% = -0.0100\%

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the sign of the charge or adds the potentials instead of subtracting, causing the leading dipole term to cancel and leaving an incorrect monopole or zero term.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V(z) = 2keqzz2−a2\frac{2k_e q z}{z^2 - a^2}

    Correct

    V(z) = keqz−a\frac{k_e q}{z - a} + ke(−q)z+a\frac{k_e (-q)}{z + a} = 2keqaz2−a2\frac{2k_e q a}{z^2 - a^2} = kepz2−a2\frac{k_e p}{z^2 - a^2}

    You treated the charge at z=−az = -a as positive +q+q rather than −q-q. Because electric potential is an algebraic scalar sum, the negative charge contributes −keqz+a-\frac{k_e q}{z + a}. When finding a common denominator, the zz terms cancel and the separation terms add: (z+a)−(z−a)=2a(z + a) - (z - a) = 2a, giving 2keqa2k_e q a (or kepk_e p) in the numerator.

  2. Step 2

    V(z) = keqz\frac{k_e q}{z} ⋅\cdot [(1−az)−1+(1+az)−1]\left[\left(1 - \frac{a}{z}\right)^{-1} + \left(1 + \frac{a}{z}\right)^{-1}\right] ≈\approx keqz\frac{k_e q}{z} ⋅\cdot [1+az+1−az]\left[1 + \frac{a}{z} + 1 - \frac{a}{z}\right] = 2keqz\frac{2k_e q}{z}

    Correct

    V_{approx\text{approx}}(z) = keqz\frac{k_e q}{z} ⋅\cdot [(1−az)−1−(1+az)−1]\left[\left(1 - \frac{a}{z}\right)^{-1} - \left(1 + \frac{a}{z}\right)^{-1}\right] ≈\approx keqz\frac{k_e q}{z} ⋅\cdot 2az\frac{2a}{z} = kepz2\frac{k_e p}{z^2}_

    Your binomial expansion technique was executed correctly, but it inherited the plus sign from Step 1. Because an electric dipole has zero net charge, the leading monopole 1/z1/z term must vanish, leaving 1/z21/z^2 as the dominant far-field term.

  3. Step 3

    V_{exact\text{exact}}(10 mm\text{ mm}) = 2906 V\text{ V}   ⟹  \implies V_{approx\text{approx}}(10 mm\text{ mm}) = 2876.8 V\text{ V}   ⟹  \implies Error at \text{Error at } 10.0 mm\text{ mm} = 1.00%  and \text{ and } 0.0100%  at \text{ at } 100.0 mm\text{ mm}

    Correct

    Percentage Error\text{Percentage Error} = Vapprox−VV\frac{V_{\text{approx}} - V}{V} ×\times 100% = -(az)\left(\frac{a}{z}\right)^2 ×\times 100%   ⟹  \implies -1.00%  and \text{ and } -0.0100%

    Your numerical calculations followed logically from your expressions, and by algebraic coincidence the ratio VapproxVexact\frac{V_{\text{approx}}}{V_{\text{exact}}} equals 1−(a/z)21 - (a/z)^2 in both cases. Note that the standard signed error is negative (−1.00%-1.00\% and −0.0100%-0.0100\%) because the approximation underestimates the exact potential.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the distance from each point charge to the observation point on the zz-axis as z−az - a and z+az + a.

You accurately applied the first-order binomial series expansion (1±x)−1≈1∓x(1 \pm x)^{-1} \approx 1 \mp x.

You correctly structured and evaluated the percentage error formula.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in superposition of electric potential

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated electric potential as an unsigned magnitude rather than an algebraic scalar sum that carries the explicit sign of each point charge, mistaking an electric dipole for a configuration of two identical positive charges.

REASONING PATH
Your ACEpath teacher’s suggested approach
Algebraic Signs in Scalar Potential
  • The electric potential due to a point charge is V=keqrV = \frac{k_e q}{r}, where qq must include its explicit sign (+q+q or −q-q).

  • Always write V=V++V−=ke(+q)r++ke(−q)r−V = V_+ + V_- = \frac{k_e (+q)}{r_+} + \frac{k_e (-q)}{r_-} before combining fractions.

Far-Field Multipole Check
  • A system with zero net charge (such as an electric dipole) cannot have a 1/r1/r monopole potential at large distances; its leading potential must fall off at least as 1/r21/r^2.

  • Check whether the leading 1/r1/r term cancels when qnet=0q_{\text{net}} = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the sign of −q-q in the superposition: V(z)=keq(1z−a−1z+a)V(z) = k_e q \left(\frac{1}{z - a} - \frac{1}{z + a}\right).

  2. Combine the terms over a common denominator: V(z)=keq[(z+a)−(z−a)z2−a2]=2keqaz2−a2=kepz2−a2V(z) = k_e q \left[\frac{(z + a) - (z - a)}{z^2 - a^2}\right] = \frac{2k_e q a}{z^2 - a^2} = \frac{k_e p}{z^2 - a^2}.

  3. Factor zz out for z≫az \gg a and apply the binomial expansion: V(z)≈keqz[(1+az)−(1−az)]=ke(2qa)z2=kepz2V(z) \approx \frac{k_e q}{z}\left[\left(1 + \frac{a}{z}\right) - \left(1 - \frac{a}{z}\right)\right] = \frac{k_e (2qa)}{z^2} = \frac{k_e p}{z^2}.

Final answer

(a) V(z)=kepz2−a2V(z) = \frac{k_e p}{z^2 - a^2}; (b) Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}; (c) Percentage error is −1.00%-1.00\% at z=10.0 mmz = 10.0\text{ mm} and −0.0100%-0.0100\% at z=100.0 mmz = 100.0\text{ mm}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how signs carry directly into scalar potentials (V=keq/rV = k_e q / r) compared to electric field vectors (where signs determine directions).

  • Practice using the net charge qnet=∑qiq_{\text{net}} = \sum q_i as a quick sanity check for the leading far-field power of 1/r1/r.

OverviewACEpath Teacher's Diagnosis

02 The student misidentifies the dipole moment definition as p = qa instead of p = 2qa, resulting in an approximation that is half of the correct value.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V(z)=keqz−a−keqz+a  ⟹  V(z)=2keqaz2−a2V(z) = \frac{k_e q}{z-a} - \frac{k_e q}{z+a} \implies V(z) = \frac{2k_e q a}{z^2 - a^2}

  2. Step 2

    V(z)=keqz⋅[(1+az)−(1−az)]=2keqaz2  ⟹  With p=qa,  V(z)≈2kepz2V(z) = \frac{k_e q}{z} \cdot \left[\left(1 + \frac{a}{z}\right) - \left(1 - \frac{a}{z}\right)\right] = \frac{2k_e q a}{z^2} \implies \text{With } p = qa,\; V(z) \approx \frac{2k_e p}{z^2}

    Correct

    Vapprox(z)=ke(2qa)z2=kepz2V_{\text{approx}}(z) = \frac{k_e (2qa)}{z^2} = \frac{k_e p}{z^2}

    You accurately expanded both terms to first order in a/za/z and obtained 2keqaz2\frac{2k_e q a}{z^2}. However, the dipole separation is d=2ad = 2a, so the electric dipole moment is defined as p=qd=2qap = qd = 2qa. Substituting 2qa=p2qa = p gives Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}, without the extra factor of 22.

  3. Step 3

    p=qa=1.60×10−12 C⋅m  ⟹  Vapprox(10 mm)=287.68 V  ⟹  Vexact(10 mm)=290.59 V  ⟹  Error at 10.0 mm=1.00%,  Error at 100.0 mm=0.0100%p = qa = 1.60 \times 10^{-12}\text{ C}\cdot\text{m} \implies V_{\text{approx}}(10\text{ mm}) = 287.68\text{ V} \implies V_{\text{exact}}(10\text{ mm}) = 290.59\text{ V} \implies \text{Error at } 10.0\text{ mm} = 1.00\%,\; \text{Error at } 100.0\text{ mm} = 0.0100\%

    Correct

    Percentage Error=(VapproxVexact−1)×100%=−(az)2×100%  ⟹  −1.00% at 10.0 mm,  −0.0100% at 100.0 mm\text{Percentage Error} = \left(\frac{V_{\text{approx}}}{V_{\text{exact}}} - 1\right) \times 100\% = -\left(\frac{a}{z}\right)^2 \times 100\% \implies -1.00\% \text{ at } 10.0\text{ mm}, \; -0.0100\% \text{ at } 100.0\text{ mm}

    Because your incorrect definition p=qap = qa compensated for the extra factor of 22 in your approximation formula, your numerical values for potential and percentage error magnitudes were calculated accurately. Note that percentage error is typically signed (−1.00%-1.00\% and −0.0100%-0.0100\%) to indicate that the approximation underestimates the exact value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the principle of superposition to sum the scalar potentials of the two point charges.

You carried out the first-order binomial expansion cleanly to find the leading asymptotic term.

You accurately substituted values to evaluate the potential and determine the percentage error magnitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dipole Moment Definition Misidentification

You defined the dipole moment as p=qap = qa instead of p=qd=2qap = qd = 2qa.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the variable aa with the total separation distance rather than the half-separation distance of the dipole centered at the origin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Full Separation vs. Half Separation
  • For a dipole centered at the origin with charges at ±a\pm a, the total separation is d=2ad = 2a, so the electric dipole moment is p=qd=2qap = qd = 2qa.

  • Check the problem statement carefully to see whether aa denotes the full charge separation dd or the distance from the center d/2d/2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from the leading expansion result: V(z)≈2keqaz2V(z) \approx \frac{2k_e q a}{z^2}.

  2. Identify the dipole separation: d=2ad = 2a, which gives p=q(2a)=2qap = q(2a) = 2qa.

  3. Substitute 2qa=p2qa = p directly into the numerator: Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}.

Final answer

(a) V(z)=kepz2−a2V(z) = \frac{k_e p}{z^2 - a^2}; (b) Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}; (c) At z=10.0 mmz = 10.0\text{ mm}, error is −1.00%-1.00\%; at z=100.0 mmz = 100.0\text{ mm}, error is −0.0100%-0.0100\%.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal vector definition of electric dipole moment: p⃗=qd⃗\vec{p} = q\vec{d}, where d⃗\vec{d} is the vector pointing from −q-q to +q+q.

  • Practice checking whether coordinate parameters represent full dimensions or half-lengths in symmetrical physical systems.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the relative percentage error relative to the approximate value instead of the exact value or miscalculates the percentage error formula directly as a/z instead of (a/z)².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V(z)=keqz−a−keqz+a  ⟹  V(z)=2keqaz2−a2V(z) = \frac{k_e q}{z - a} - \frac{k_e q}{z + a} \implies V(z) = \frac{2k_e q a}{z^2 - a^2}

  2. Step 2

    V(z)=keqz[(1−az)−1−(1+az)−1]  ⟹  V(z)≈keqz[(1+az)−(1−az)]=2keqaz2=kepz2V(z) = \frac{k_e q}{z}\left[\left(1 - \frac{a}{z}\right)^{-1} - \left(1 + \frac{a}{z}\right)^{-1}\right] \implies V(z) \approx \frac{k_e q}{z}\left[\left(1 + \frac{a}{z}\right) - \left(1 - \frac{a}{z}\right)\right] = \frac{2k_e q a}{z^2} = \frac{k_e p}{z^2}

  3. Step 3

    Error=(az)×100%\text{Error} = \left(\frac{a}{z}\right) \times 100\%

    Correct

    Percentage Error=Vapprox(z)−V(z)V(z)×100%=−(az)2×100%\text{Percentage Error} = \frac{V_{\text{approx}}(z) - V(z)}{V(z)} \times 100\% = -\left(\frac{a}{z}\right)^2 \times 100\%

    You wrote the relative error as az\frac{a}{z} rather than evaluating Vapprox−VV\frac{V_{\text{approx}} - V}{V}. Because VapproxV=z2−a2z2=1−(az)2\frac{V_{\text{approx}}}{V} = \frac{z^2 - a^2}{z^2} = 1 - \left(\frac{a}{z}\right)^2, the true relative error is quadratic in az\frac{a}{z}, not linear.

  4. Step 4

    At z=10.0 mm:Error=(1.0010.0)×100%=10.0%  ⟹  At z=100.0 mm:Error=(1.00100.0)×100%=1.00%\text{At } z = 10.0\text{ mm}: \text{Error} = \left(\frac{1.00}{10.0}\right) \times 100\% = 10.0\% \implies \text{At } z = 100.0\text{ mm}: \text{Error} = \left(\frac{1.00}{100.0}\right) \times 100\% = 1.00\%

    Correct

    At z=10.0 mm:Error=−1.00%;At z=100.0 mm:Error=−0.0100%\text{At } z = 10.0\text{ mm}: \text{Error} = -1.00\%; \quad \text{At } z = 100.0\text{ mm}: \text{Error} = -0.0100\%

    Your numerical substitutions followed your formula correctly, but the resulting values are off by orders of magnitude because of the linear error formula used in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You set up the exact Coulomb potential for both charges along the axis with the correct signs and distances.

You combined the fractions with a correct common denominator to obtain the exact expression.

You applied the binomial approximation cleanly to isolate the leading dipole term.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Relative Error Formulation Error

You guessed that the relative error order matches the expansion parameter az\frac{a}{z} instead of computing Vapprox−VV\frac{V_{\text{approx}} - V}{V}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the expansion variable x=azx = \frac{a}{z} with the fractional error between the truncated series and the exact function. Because the dipole potential is an odd function of the expansion variable inside the bracket, the first neglected correction term is of order (az)2\left(\frac{a}{z}\right)^2, making the relative error quadratic rather than linear.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always Write the Formal Error Definition First
  • Relative Error=Approximate−ExactExact=ApproximateExact−1\text{Relative Error} = \frac{\text{Approximate} - \text{Exact}}{\text{Exact}} = \frac{\text{Approximate}}{\text{Exact}} - 1

  • Do not guess the power of the error term. Form the ratio VapproxVexact\frac{V_{\text{approx}}}{V_{\text{exact}}} directly and simplify.

Inspect the Ratio of Monomial to Binomial Denominators
  • kep/z2kep/(z2−a2)=z2−a2z2=1−(az)2\frac{k_e p / z^2}{k_e p / (z^2 - a^2)} = \frac{z^2 - a^2}{z^2} = 1 - \left(\frac{a}{z}\right)^2

  • Subtract 11 from the ratio to get the exact fractional error −(az)2-\left(\frac{a}{z}\right)^2 immediately.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the fractional error as Vapprox(z)−V(z)V(z)=Vapprox(z)V(z)−1\frac{V_{\text{approx}}(z) - V(z)}{V(z)} = \frac{V_{\text{approx}}(z)}{V(z)} - 1.

  2. Substitute the formulas: Vapprox(z)V(z)=kepz2kepz2−a2=z2−a2z2=1−(az)2\frac{V_{\text{approx}}(z)}{V(z)} = \frac{\frac{k_e p}{z^2}}{\frac{k_e p}{z^2 - a^2}} = \frac{z^2 - a^2}{z^2} = 1 - \left(\frac{a}{z}\right)^2.

  3. Subtract 11 to find the exact percentage error: −(az)2×100%-\left(\frac{a}{z}\right)^2 \times 100\%.

  4. Evaluate at z=10.0 mmz = 10.0\text{ mm}: −(1.00 mm10.0 mm)2×100%=−(0.100)2×100%=−1.00%-\left(\frac{1.00\text{ mm}}{10.0\text{ mm}}\right)^2 \times 100\% = -(0.100)^2 \times 100\% = -1.00\%.

  5. Evaluate at z=100.0 mmz = 100.0\text{ mm}: −(1.00 mm100.0 mm)2×100%=−(0.0100)2×100%=−0.0100%-\left(\frac{1.00\text{ mm}}{100.0\text{ mm}}\right)^2 \times 100\% = -(0.0100)^2 \times 100\% = -0.0100\%.

Final answer

(a) V(z)=kepz2−a2V(z) = \frac{k_e p}{z^2 - a^2}; (b) Vapprox(z)=kepz2V_{\text{approx}}(z) = \frac{k_e p}{z^2}; (c) At z=10.0 mmz = 10.0\text{ mm}, error is −1.00%-1.00\%; at z=100.0 mmz = 100.0\text{ mm}, error is −0.0100%-0.0100\%.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing fractional errors by forming the algebraic ratio fapproxfexact−1\frac{f_{\text{approx}}}{f_{\text{exact}}} - 1 before plugging in numbers.

  • Review multipole expansions to verify why dipole corrections drop off in powers of (a/r)2(a/r)^2 rather than a/ra/r along symmetry axes.

Lock it in

Similar question

01

Two point charges, +2q+2q at (0,0,+d)(0, 0, +d) and −q-q at (0,0,−d)(0, 0, -d), lie on the zz-axis. Write the exact expression for the electric potential V(z)V(z) on the positive zz-axis for z>dz > d, and determine the leading term for z≫dz \gg d.

Answer

V(z)=ke(2q)z−d−keqz+d=keq(z+3d)z2−d2V(z) = \frac{k_e (2q)}{z - d} - \frac{k_e q}{z + d} = \frac{k_e q(z + 3d)}{z^2 - d^2}. For z≫dz \gg d, the leading term is the net monopole term Vapprox(z)=keqzV_{\text{approx}}(z) = \frac{k_e q}{z} because qnet=+2q−q=+q≠0q_{\text{net}} = +2q - q = +q \neq 0.

02

An electric dipole consists of +q+q at z=+az = +a and −q-q at z=−az = -a. Show that the electric potential V(x)V(x) at any point (x,0,0)(x, 0, 0) on the perpendicular bisector (the xx-axis) is identically zero.

Answer

The distance from +q+q to (x,0,0)(x, 0, 0) is r+=x2+a2r_+ = \sqrt{x^2 + a^2}, and from −q-q is r−=x2+(−a)2=x2+a2r_- = \sqrt{x^2 + (-a)^2} = \sqrt{x^2 + a^2}. Since r+=r−r_+ = r_-, the potential is V(x)=keqx2+a2+ke(−q)x2+a2=0V(x) = \frac{k_e q}{\sqrt{x^2 + a^2}} + \frac{k_e (-q)}{\sqrt{x^2 + a^2}} = 0 everywhere on the equatorial plane.

03

A linear quadrupole is formed by three charges along the zz-axis: +q+q at z=+az = +a, −2q-2q at z=0z = 0, and +q+q at z=−az = -a. Find the exact potential V(z)V(z) for z>az > a, and find its leading far-field dependence on zz for z≫az \gg a.

Answer

Superposition gives V(z)=keq(1z−a−2z+1z+a)=keq(2zz2−a2−2z)=2keqa2z(z2−a2)V(z) = k_e q \left(\frac{1}{z - a} - \frac{2}{z} + \frac{1}{z + a}\right) = k_e q \left(\frac{2z}{z^2 - a^2} - \frac{2}{z}\right) = \frac{2 k_e q a^2}{z(z^2 - a^2)}. For z≫az \gg a, the denominator simplifies to z3z^3, giving the leading quadrupole dependence V(z)≈2keqa2z3V(z) \approx \frac{2 k_e q a^2}{z^3} (scaling as 1/z31/z^3 because both net charge and net dipole moment are zero).

Loading workspace…