Resources
A physical pendulum consists of a uniform thin rod of unknown mass and length pivoted at a point located a distance from its center of mass. Laboratory measurements reveal that the moment of inertia of the rod about the pivot axis is exactly . Using the parallel-axis theorem (, where for a uniform rod), reverse-engineer the measurement to determine the mass of the rod.
Answer and steps
Final answer
Steps
State the Parallel-Axis Theorem
The parallel-axis theorem relates the moment of inertia of an object about any axis, , to the moment of inertia about a parallel axis passing through its center of mass, :
where:
- is the total mass of the object,
- is the perpendicular distance between the two parallel axes.
For a uniform thin rod of length rotating about an axis perpendicular to the rod through its center of mass, the moment of inertia is:
Formulate the Equation for the Pivot Axis
Substitute into the parallel-axis theorem:
Factor out the unknown mass :
Rearrange this expression to solve for :
Substitute the Given Values and Calculate
Given:
First, compute the geometric terms inside the parentheses:
Sum the two terms:
Now, calculate :
Common Pitfall: A common mistake is using the formula for rotation about an end, , or confusing the distance from the center of mass with the distance from one end of the rod. Always measure directly from the center of mass when applying the parallel-axis theorem.
Typical errors
01 The student misremembers the rotational inertia of a rod about its center of mass as (1/3)ML² instead of (1/12)ML², leading to an incorrect mass of 1.01 kg.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You used , which is the rotational inertia of a uniform rod about an axis through its endpoint. The rotational inertia about the center of mass is .
- Step 3Correct
Your numerical substitutions and arithmetic follow correctly from your formula in Step 2, but they are affected by using instead of .
- Step 4Correct
Your final calculation is algebraically consistent with your earlier values, but the numerical answer is incorrect due to the initial formula error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified and applied the parallel-axis theorem formula.
You substituted the given values for , , and into the algebraic expression accurately.
You factored out the mass and performed the algebraic rearrangement correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the rotational inertia of a thin rod about its center of mass () with its rotational inertia about an axis through one of its ends ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Axis Location Check
For a uniform rod of length , (center) and (endpoint).
Always verify whether the given axis passes through the midpoint (center of mass) or an extremity before choosing the coefficient.
- Parallel-Axis Theorem Requirement
In , the base term must always be the moment of inertia about the center of mass, .
Ensure the base rotational inertia represents rotation through the center of mass, which is always the minimum possible moment of inertia for parallel axes.
CORRECTED PATH
ACEpath Teacher's DemonstrationSubstitute into .
Factor out : .
Evaluate the geometric terms: .
Solve for : .
02 The student forgets to square the distance d in the parallel-axis term, evaluating Md instead of Md² and yielding M = 1.36 kg.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You wrote the parallel-axis term as instead of squaring the axis offset distance , which should be . Moments of inertia always have dimensions of .
- Step 2Correct
Your arithmetic was carried out correctly according to your setup, but substituting instead of propagated the missing exponent error into the sum.
- Step 3Correct
You solved for correctly from your previous line, but because the denominator was rather than , the final mass is incorrect.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used for the moment of inertia about the center of mass of a thin rod.
You correctly computed .
You factored out the unknown mass cleanly to isolate it.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou dropped the exponent on the shift distance , writing rather than .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou may have treated as a first-order linear factor or made a hasty notation slip. A quick dimensional check reveals that has units of , which cannot be added to (units of ).
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Consistency Check
Every additive term contributing to a moment of inertia must have units of (i.e., ).
Always verify that every term containing distance is squared before substituting numerical values.
- Parallel-Axis Theorem Definition
, where is the perpendicular distance between the two parallel axes.
Write the general formula with explicit squared parentheses, , to guard against dropping the power.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the full parallel-axis theorem: .
Compute the geometric factor: .
Solve for : .
03 The student subtracts the parallel-axis shift Md² from I_cm instead of adding it, mistakenly writing I_pivot = I_cm - Md² and arriving at M = 6.60 kg.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The moment of inertia about any axis parallel to the center-of-mass axis is always strictly greater than . Therefore, the parallel-axis shift term must be added to , not subtracted.
- Step 2Correct
Your arithmetic and substitution of and were executed accurately, but the subtraction propagated from the initial formula error.
- Step 3Correct
Dividing by rather than yielded twice the correct mass.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled and calculated the center-of-mass moment of inertia for a uniform thin rod, .
You accurately squared the pivot offset distance to get .
You factored out the mass and performed the algebraic division correctly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisMisinterpreting the parallel-axis theorem as a subtraction rather than an addition, overlooking the physical principle that an object's moment of inertia is always at its absolute minimum about an axis passing through its center of mass.
REASONING PATH
Your ACEpath teacher’s suggested approach- Minimum Moment of Inertia Principle
represents the minimum possible moment of inertia for any set of parallel axes. Shifting the rotation axis by a distance always increases rotational inertia: .
Whenever moving away from the center of mass to an arbitrary parallel axis, add .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the parallel-axis theorem with addition: .
Factor out the mass: .
Substitute the values: .
Solve for : .
Lock it in
What is the moment of inertia of a uniform thin rod of mass and length rotating about an axis perpendicular to the rod through its center of mass?
. The coefficient is for the center of mass, compared to for an end.
Similar question
A uniform thin rod of mass and length is pivoted about an axis perpendicular to the rod located from its center of mass. Calculate the moment of inertia of the rod about this pivot axis.
Answer
. Steps: . Then .
A uniform thin rod of length has a moment of inertia of about a pivot located at distance from its center of mass. If the mass of the rod is , find the pivot distance .
Answer
. Steps: . Using : .
A physical pendulum consists of a uniform rod of length pivoted at distance from its center of mass. Determine the distance in terms of such that the pendulum's period of small oscillations is minimized. (Recall .)
Answer
. Steps: , so the function to minimize is . Differentiating with respect to and setting to zero yields .