Resources

A large, open-top cylindrical industrial holding tank contains water of density ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3. A small drain hole of circular cross section is opened at the base of the tank, discharging water horizontally directly into the open atmosphere where the ambient atmospheric pressure is Patm=1.01×105 PaP_{\text{atm}} = 1.01\times 10^5\text{ Pa}. High-speed sensor telemetry records that the discharge jet emerges at an initial speed of v=12.0 m/sv = 12.0\text{ m/s}. Assuming steady, non-viscous flow, negligible cross-sectional area of the orifice relative to the tank's surface area, and taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the initial depth hh of the water column above the center of the drain orifice.

Answer and steps

Final answer

h=7.35 mh = 7.35\text{ m}

Steps

01

State Bernoulli's Equation

To find the initial depth hh of the water column, we apply Bernoulli's principle along a streamline connecting the open top surface of the tank (Point 1) to the center of the drain orifice (Point 2).

For steady, incompressible, non-viscous fluid flow:

P1+12ρv12+ρgy1=P2+12ρv22+ρgy2P_1 + \frac{1}{2}\rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2}\rho v_2^2 + \rho g y_2

where:

  • PP is the static pressure,
  • ρ\rho is the fluid density,
  • vv is the flow velocity,
  • yy is the vertical elevation relative to a chosen reference level,
  • gg is the acceleration due to gravity.

02

Identify the Conditions at Each Point

Choose the center of the drain hole as the reference height (y2=0y_2 = 0):

  • At the top surface (Point 1):

    • The tank is open to the atmosphere: P1=PatmP_1 = P_{\text{atm}}.
    • Elevation: y1=hy_1 = h.
    • Since the cross-sectional area of the orifice is negligible compared to the tank's surface area (A2≪A1A_2 \ll A_1), the continuity equation (A1v1=A2v2A_1 v_1 = A_2 v_2) implies that the water level drops extremely slowly: v1≈0v_1 \approx 0.
  • At the exit orifice (Point 2):

    • The jet discharges directly into the atmosphere: P2=PatmP_2 = P_{\text{atm}}.
    • Elevation: y2=0y_2 = 0.
    • Speed of the emerging jet: v2=v=12.0 m/sv_2 = v = 12.0\text{ m/s}.

03

Simplify and Solve for Height hh

Substitute these boundary conditions into Bernoulli's equation:

Patm+0+ρgh=Patm+12ρv2+0P_{\text{atm}} + 0 + \rho g h = P_{\text{atm}} + \frac{1}{2}\rho v^2 + 0

Subtract PatmP_{\text{atm}} from both sides and divide by ρ\rho:

gh=12v2g h = \frac{1}{2}v^2

This yields Torricelli's law:

h=v22gh = \frac{v^2}{2g}

Substitute the given numerical values:

h=(12.0 m/s)22⋅9.80 m/s2=14419.6 m≈7.35 mh = \frac{(12.0\text{ m/s})^2}{2 \cdot 9.80\text{ m/s}^2} = \frac{144}{19.6}\text{ m} \approx 7.35\text{ m}


Pitfall to Avoid

  • Atmospheric pressure cancellation: Both the top surface and the discharging jet are exposed to the open atmosphere at the same ambient pressure (PatmP_{\text{atm}}), so atmospheric pressure cancels out entirely and the exact value of PatmP_{\text{atm}} (or ρ\rho) does not affect the required height.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 2 in Torricelli's relation by equating potential energy directly to velocity squared without the 1/2 factor, yielding h = v²/g.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v2=gh  ⟹  h=v2gv^2 = gh \implies h = \frac{v^2}{g}

    Correct

    gh=12v2  ⟹  h=v22ggh = \frac{1}{2}v^2 \implies h = \frac{v^2}{2g}

    You related velocity and depth using v2=ghv^2 = gh, which leaves out the factor of 12\frac{1}{2} from the kinetic energy density term 12ρv2\frac{1}{2}\rho v^2 in Bernoulli's equation.

  2. Step 2

    h=12.029.80h = \frac{12.0^2}{9.80}

    Correct

    h=12.022(9.80)h = \frac{12.0^2}{2(9.80)}

    You substituted the given values into your formula accurately, but the expression was missing the factor of 22 in the denominator from the previous step.

  3. Step 3

    h=1449.80=14.69 mh = \frac{144}{9.80} = 14.69\text{ m}

    Correct

    h=14419.6≈7.35 mh = \frac{144}{19.6} \approx 7.35\text{ m}

    Your arithmetic was carried out correctly according to your formula, but the resulting depth is twice the actual value due to the missing factor of 22.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the exit velocity depends directly on gravitational acceleration and water column height.

You accurately substituted the given numerical values into your derived equation.

You evaluated the arithmetic with proper precision and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing factor of 1/2 in kinetic energy density

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated potential energy density ρgh\rho g h directly to ρv2\rho v^2 instead of the kinetic energy density 12ρv2\frac{1}{2}\rho v^2, forgetting the factor of 12\frac{1}{2} that comes from kinetic energy conservation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy Density in Bernoulli's Equation
  • Each unit volume of moving fluid carries kinetic energy equal to 12ρv2\frac{1}{2}\rho v^2, not ρv2\rho v^2.

  • Always write out the full Bernoulli relation P1+12ρv12+ρgy1=P2+12ρv22+ρgy2P_1 + \frac{1}{2}\rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2}\rho v_2^2 + \rho g y_2 before cancelling terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Bernoulli's principle between the top surface and the exit orifice: ρgh=12ρv2\rho g h = \frac{1}{2}\rho v^2

  2. Divide both sides by ρ\rho: gh=12v2  ⟹  h=v22ggh = \frac{1}{2}v^2 \implies h = \frac{v^2}{2g}

  3. Substitute v=12.0 m/sv = 12.0\text{ m/s} and g=9.80 m/s2g = 9.80\text{ m/s}^2: h=(12.0 m/s)22(9.80 m/s2)=14419.6 m≈7.35 mh = \frac{(12.0\text{ m/s})^2}{2(9.80\text{ m/s}^2)} = \frac{144}{19.6}\text{ m} \approx 7.35\text{ m}

Final answer

h=7.35 mh = 7.35\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of Torricelli's law from energy conservation to reinforce why the factor of 22 appears under the square root.

  • Work through problems where the top surface has non-zero velocity or is pressurized to practice setting up the full Bernoulli equation systematically.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the efflux velocity when inverting Torricelli's law, calculating h = v / (2g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=2gh  ⟹  h=v2gv = 2gh \implies h = \frac{v}{2g}

    Correct

    v=2gh  ⟹  h=v22gv = \sqrt{2gh} \implies h = \frac{v^2}{2g}

    From Bernoulli's equation (or conservation of energy 12mv2=mgh\frac{1}{2}mv^2 = mgh), kinetic energy depends on v2v^2, which leads to v2=2ghv^2 = 2gh. Writing v=2ghv = 2gh omits the exponent on velocity and is dimensionally inconsistent.

  2. Step 2

    h=12.02×9.80=12.019.6=0.61 mh = \frac{12.0}{2 \times 9.80} = \frac{12.0}{19.6} = 0.61\text{ m}

    Correct

    h=(12.0 m/s)22×9.80 m/s2=14419.6 m≈7.35 mh = \frac{(12.0\text{ m/s})^2}{2 \times 9.80\text{ m/s}^2} = \frac{144}{19.6}\text{ m} \approx 7.35\text{ m}

    You evaluated your formula accurately with the given numbers, but the result is incorrect because it stems from the missing exponent on velocity.

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that fluid efflux under gravity relates height hh, speed vv, and acceleration due to gravity gg.

You correctly substituted the numerical values v=12.0 m/sv = 12.0\text{ m/s} and g=9.80 m/s2g = 9.80\text{ m/s}^2 into your expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing velocity exponent in Torricelli's law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled Torricelli's law as a linear relation in velocity (v=2ghv = 2gh) rather than equating kinetic energy per unit volume (12ρv2\frac{1}{2}\rho v^2) with gravitational potential energy per unit volume (ρgh\rho gh), which requires v2=2ghv^2 = 2gh.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Verification
  • Velocity has units m/s\text{m/s} and gg has units m/s2\text{m/s}^2, so vg\frac{v}{g} has units of seconds (time), while v2g\frac{v^2}{g} has units of meters (length).

  • Always check that the algebraic expression for a distance has units of length before plugging in numbers.

Energy / Bernoulli Origin
  • Bernoulli's equation along a streamline relates 12ρv2\frac{1}{2}\rho v^2 to ρgh\rho gh, giving v=2ghv = \sqrt{2gh} or h=v22gh = \frac{v^2}{2g}.

  • Derive the relation by equating potential energy loss to kinetic energy gain whenever you are uncertain about the formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Torricelli's law: v=2ghv = \sqrt{2gh}, which squares to v2=2ghv^2 = 2gh.

  2. Solve for the height of the fluid column: h=v22gh = \frac{v^2}{2g}.

  3. Substitute v=12.0 m/sv = 12.0\text{ m/s} and g=9.80 m/s2g = 9.80\text{ m/s}^2: h=12.022×9.80=14419.6 m≈7.35 mh = \frac{12.0^2}{2 \times 9.80} = \frac{144}{19.6}\text{ m} \approx 7.35\text{ m}.

Final answer

h≈7.35 mh \approx 7.35\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving Torricelli's equation directly from Bernoulli's equation (P1+12ρv12+ρgy1=P2+12ρv22+ρgy2P_1 + \frac{1}{2}\rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2}\rho v_2^2 + \rho g y_2) to reinforce why velocity is squared.

  • Perform a quick dimensional analysis on inverted formulas before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly adds atmospheric pressure as extra static head or tries to solve P_atm = ρgh, treating atmospheric pressure as the hydrostatic pressure at depth h.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Patm=ρghP_{\text{atm}} = \rho g h

    Correct

    P1+12ρv12+ρgy1=P2+12ρv22+ρgy2  ⟹  ρgh=12ρv2P_1 + \frac{1}{2}\rho v_1^2 + \rho g y_1 = P_2 + \frac{1}{2}\rho v_2^2 + \rho g y_2 \implies \rho g h = \frac{1}{2}\rho v^2

    You set atmospheric pressure equal to the hydrostatic head ρgh\rho g h. Because both the top water surface and the drain orifice are exposed to the open atmosphere, atmospheric pressure cancels out on both sides of Bernoulli's equation. The fluid depth converts potential energy into the kinetic energy of the jet, leading to Torricelli's law: gh=12v2g h = \frac{1}{2}v^2.

  2. Step 2

    h=Patmρg=1.01×1051000×9.80=10.31 mh = \frac{P_{\text{atm}}}{\rho g} = \frac{1.01\times 10^5}{1000\times 9.80} = 10.31\text{ m}

    Correct

    h=v22g=(12.0 m/s)22(9.80 m/s2)≈7.35 mh = \frac{v^2}{2g} = \frac{(12.0\text{ m/s})^2}{2(9.80\text{ m/s}^2)} \approx 7.35\text{ m}

    Your arithmetic in evaluating 1.01×1059800\frac{1.01\times 10^5}{9800} was carried out correctly, but the result is incorrect because it relies on the wrong governing equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the relationship between hydrostatic pressure, fluid density, and depth (P=ρghP = \rho g h).

You accurately substituted your chosen numerical values and evaluated the arithmetic.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied hydrostatic formula instead of Bernoulli's equation

You equated atmospheric pressure directly to the hydrostatic pressure of the water column instead of relating the water depth to the speed of the escaping jet.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a static column of fluid supporting an external pressure with dynamic fluid discharge governed by energy conservation (Bernoulli's principle). In an open-top tank with an open drain, both endpoints share the same ambient pressure (PatmP_{\text{atm}}), meaning pressure does no net work; instead, gravitational potential energy per unit volume (ρgh\rho g h) converts directly into kinetic energy (12ρv2\frac{1}{2}\rho v^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Flow Conditions (Static vs. Dynamic)
  • If fluid is moving through an orifice with a specified exit velocity vv, apply Bernoulli's equation or Torricelli's law, not static equilibrium (P=ρghP = \rho g h).

  • Look for flow velocities or discharge rates in the problem prompt before writing down an equation.

Account for Ambient Pressure at Boundaries
  • Surfaces open to the atmosphere always experience P=PatmP = P_{\text{atm}}. If both inlet and outlet are open to air, PatmP_{\text{atm}} cancels on both sides of Bernoulli's equation.

  • Write out the full Bernoulli equation with P1=PatmP_1 = P_{\text{atm}} and P2=PatmP_2 = P_{\text{atm}} to verify that ambient pressure drops out.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Bernoulli's equation along a streamline from the top surface (y1=hy_1 = h, v1≈0v_1 \approx 0, P1=PatmP_1 = P_{\text{atm}}) to the orifice (y2=0y_2 = 0, v2=vv_2 = v, P2=PatmP_2 = P_{\text{atm}}): Patm+ρgh=Patm+12ρv2P_{\text{atm}} + \rho g h = P_{\text{atm}} + \frac{1}{2}\rho v^2.

  2. Subtract PatmP_{\text{atm}} and divide by ρ\rho to obtain Torricelli's law: h=v22gh = \frac{v^2}{2g}.

  3. Substitute v=12.0 m/sv = 12.0\text{ m/s} and g=9.80 m/s2g = 9.80\text{ m/s}^2: h=14419.6≈7.35 mh = \frac{144}{19.6} \approx 7.35\text{ m}.

Final answer

h≈7.35 mh \approx 7.35\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of Torricelli's law from Bernoulli's equation for open-vessel discharge.

  • Practice identifying when ambient atmospheric pressure cancels out in open fluid systems.

  • Solve problems where both the liquid level and exit velocity are linked by conservation of energy.

Lock it in

Similar question

01

A small puncture opens at the base of an open cylindrical water barrel, causing water to spray out horizontally at v=7.00 m/sv = 7.00\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the depth of the water column above the hole.

Answer

h=2.50 mh = 2.50\text{ m}. By Torricelli's law, h=v22g=(7.00)22(9.80)=49.019.6=2.50 mh = \frac{v^2}{2g} = \frac{(7.00)^2}{2(9.80)} = \frac{49.0}{19.6} = 2.50\text{ m}.

02

An open holding container has an orifice located 4.90 m4.90\text{ m} below the water line. If the cross-sectional area of the container is very large compared to the orifice, determine the discharge speed vv of the emerging stream (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

v=9.80 m/sv = 9.80\text{ m/s}. Using Torricelli's law, v=2gh=2(9.80)(4.90)=96.04=9.80 m/sv = \sqrt{2gh} = \sqrt{2(9.80)(4.90)} = \sqrt{96.04} = 9.80\text{ m/s}.

03

A sealed industrial tank contains water under an absolute air gauge pressure at the top surface of P1=1.49×105 PaP_1 = 1.49\times 10^5\text{ Pa}. Atmospheric pressure outside is Patm=1.00×105 PaP_{\text{atm}} = 1.00\times 10^5\text{ Pa}, and water density is ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3. A small valve at the bottom opens to the atmosphere, discharging water at v=14.0 m/sv = 14.0\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the water height hh above the valve.

Answer

h=5.00 mh = 5.00\text{ m}. Apply Bernoulli's equation: (P1−Patm)+ρgh=12ρv2(P_1 - P_{\text{atm}}) + \rho g h = \frac{1}{2}\rho v^2. Substitute the values: 4.9×104+1000(9.80)h=12(1000)(14.0)2=9.8×1044.9\times 10^4 + 1000(9.80)h = \frac{1}{2}(1000)(14.0)^2 = 9.8\times 10^4. Solving yields 9800h=49000  ⟹  h=5.00 m9800h = 49000 \implies h = 5.00\text{ m}.

Loading workspace…