Resources
An electric locomotive travels along a straight track at a speed of . The track orientation is east of north. Convert the speed into fundamental SI units (), and calculate the orthogonal velocity components directed due east () and due north ().
Answer and steps
Final answer
, ,
Steps
Convert the speed to SI units ()
The conversion factor between kilometers per hour () and meters per second () is based on:
Dividing the speed in by gives the speed in :
Set up the directional components
Define a coordinate system with:
- The positive vertical axis pointing North
- The positive horizontal axis pointing East
The track is directed at an angle east of north. This means the angle is measured from the North axis toward the East axis:
- The North component () is adjacent to the angle .
- The East component () is opposite to the angle .
Using right-triangle trigonometry:
Common Pitfall: Do not automatically assign cosine to the horizontal axis and sine to the vertical axis. The trigonometric function depends on where the reference angle is measured: because the angle is given relative to North (the vertical axis), the horizontal component uses and the vertical component uses .
Calculate the orthogonal components
Substitute and :
- Eastward component ():
- Northward component ():
Typical errors
01 The student swaps the sine and cosine trigonometric functions relative to the given angle measured from the north axis.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the angle of is measured east of north, the eastward component forms the opposite side of the vector right triangle, which requires the sine function rather than cosine.
- Step 3Correct
The northward axis is the reference line from which the angle is measured, making the north component adjacent to the angle, which requires the cosine function rather than sine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the given speed of to using the conversion factor of .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou associated the horizontal east component with cosine and the vertical north component with sine by default, rather than identifying which side is adjacent to the given angle.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisDefaulting to the convention and assumes is measured from the horizontal axis. When an orientation is given as an angle from the vertical axis (such as 'east of north'), the geometric roles of adjacent and opposite reverse.
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Axis Identification
In directional bearings like ' East of North', the second direction named ('North') is the reference axis where .
Always sketch the vector and mark the angle against the north vertical axis before writing trigonometric ratios.
- Trigonometric Definition Check
and .
Confirm whether the component you are calculating lies along the angle's reference line (adjacent ) or across from it (opposite ).
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the reference axis: east of north means the angle is adjacent to the North axis and opposite to the East axis.
Calculate the eastward velocity component: .
Calculate the northward velocity component: .
, ,
02 The student multiplies by 3.6 instead of dividing by 3.6 when converting km/h to m/s, resulting in an inflated speed that propagates into both components.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You multiplied by instead of dividing by . Since and , the conversion factor is .
- Step 2Correct
Your trigonometric setup for the eastward component is completely correct, but the result is inflated because it uses your incorrect speed from Step 1.
- Step 3Correct
Your trigonometric setup for the northward component is completely correct, but the calculated value inherits the initial unit conversion error.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that an orientation east of north means the North axis is adjacent to the angle and the East axis is opposite to it.
You correctly applied right-triangle trigonometry by using sine for the East component and cosine for the North component.
You rounded your final calculated numerical values accurately to three significant figures based on your intermediate number.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou knew that is the conversion factor relating and , but you inverted the operation and multiplied instead of dividing.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing whether to multiply or divide by stems from memorizing the number without using dimensional analysis or an intuitive magnitude check. Since , any speed expressed in must have a smaller numerical value than when expressed in .
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Analysis
Write out the fraction units explicitly so the old units cancel out cleanly before doing arithmetic.
- Magnitude Reality Check
A numerical value in is always smaller than the corresponding value in ().
Verify that your speed in is roughly one-third to one-fourth of the value in .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the speed using dimensional analysis: .
Calculate the eastward velocity component: .
Calculate the northward velocity component: .
, ,
03 The student computes trigonometric functions with a calculator in radian mode rather than degree mode.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Your formula setup is correct because East is opposite the angle measured from North. However, you evaluated in radians () rather than degrees (), which produced instead of .
- Step 3Correct
Your formula setup is correct because North is adjacent to the reference angle. However, evaluating in radians () instead of degrees () gave instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly converted the speed from kilometers per hour to meters per second.
You identified the correct trigonometric functions relative to the North axis by using sine for the opposite East component and cosine for the adjacent North component.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou evaluated as rather than on your calculator.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYour calculator was configured in radian mode (RAD) instead of degree mode (DEG). In kinematics problems where directional bearings are given with degree symbols (), trigonometric functions must be calculated in degree mode. A quick physical check—noticing that an eastward heading in the first quadrant cannot have a negative component—would immediately alert you to this mode mismatch.
REASONING PATH
Your ACEpath teacher’s suggested approach- Calculator Angle Mode
Whenever an angle is given in degrees (), the calculator display indicator must show
DEG(notRADorGRAD).Check the status bar of your calculator before evaluating trigonometric expressions, or test as a quick calibration.
- Sign and Magnitude Sanity Check
Vectors directed into the northeast quadrant must have strictly positive values for both East and North components.
Inspect the sign of your result immediately: if a heading between and yields a negative component like , switch your calculator mode to degrees and recompute.
CORRECTED PATH
ACEpath Teacher's Demonstration, ,
Lock it in
When a vector orientation is given as ' east of north', which axis is adjacent to the angle?
The North axis. The second direction named is the reference line from which the angle opens.
Similar question
A boat crosses a river at at an angle of east of north. Determine its eastward component () and northward component ().
Answer
and . The angle is measured from the north axis, so and .
An aircraft flies at a ground speed of on a bearing of north of west. Convert its speed to and calculate its westward and northward velocity components.
Answer
, , and . First, . The angle is measured from the west axis toward north, so and .
A projectile is launched from the ground at an angle of with the vertical at a speed of . Calculate the initial horizontal velocity () and initial vertical velocity ().
Answer
and . Because the angle is specified relative to the vertical axis, the horizontal component is opposite: . The vertical component is adjacent: .