Resources
In a physics laboratory calorimetry experiment, a solid copper cylinder of mass is heated in a boiling water bath to an initial temperature . The cylinder is quickly transferred into an insulated aluminum calorimeter cup of mass containing of distilled water, initially in thermal equilibrium at . The specific heats are , , and . Assuming no heat is lost to the external surroundings, calculate the final equilibrium temperature of the mixture in degrees Celsius, and calculate the total net change in entropy of the isolated system in .
Answer and steps
Final answer
,
Steps
Establish the Heat Capacities
The calorimeter cup and the distilled water are initially in thermal equilibrium at , while the copper cylinder is at .
Compute the heat capacity for each component:
- Copper cylinder:
- Aluminum calorimeter cup:
- Distilled water:
The combined heat capacity of the cold reservoir (calorimeter cup plus water) is:
Determine the Final Equilibrium Temperature
Since the calorimeter is insulated from the external surroundings, the net thermal energy exchanged inside the system is zero:
Rearranging for the final temperature :
Substitute the values:
Calculate the Total Net Change in Entropy
Entropy is a state function. For a substance of constant heat capacity changing temperature from to without a phase change, the entropy change is given by:
Crucial Pitfall: Absolute temperatures in Kelvin must always be used in entropy equations:
- Entropy change of the copper cylinder:
- Entropy change of the calorimeter and water:
- Total change in entropy: Because the system is thermally isolated from the outside environment, the total entropy change of the universe equals the net entropy change of the components:
The positive value () is consistent with the Second Law of Thermodynamics for an irreversible spontaneous heat transfer.
Typical errors
01 The student ignores the heat capacity of the calorimeter cup, leading to an overestimated equilibrium temperature and inaccurate entropy change.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You did not include the heat absorbed by the aluminum calorimeter cup in your energy balance equation. Because the cup is in direct contact with the water, it also warms from to and absorbs thermal energy .
- Step 2Correct
You converted all temperatures to Kelvin correctly using , but your value for was affected by the omission in the previous step.
- Step 3Correct
You used the correct logarithmic integral form and summed the components properly, but this step carries over the inaccurate and also leaves out the entropy gained by the aluminum cup, .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly equated heat lost to heat gained for a thermally isolated system.
You converted all temperatures to absolute temperatures in Kelvin before calculating entropy.
You correctly used the integral relation for temperature changes without a phase transition.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou solved the heat transfer assuming only water was absorbing heat from the copper block.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the calorimeter cup as an inert boundary rather than an active thermal component that shares the cold water's initial temperature and heat capacity.
REASONING PATH
Your ACEpath teacher’s suggested approach- Account for all system components
Every mass inside the isolated calorimeter that changes temperature exchanges heat: .
Check the problem statement for given mass and specific heat of the container; if provided, add to the energy balance.
- Include container entropy in the universe total
Entropy is extensive: .
Ensure that every component with non-zero heat capacity has its own term included in .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the combined heat capacity of the cold reservoir: .
Set up the full heat balance: .
Solve for the equilibrium temperature: (or using standard rounding), so .
Compute .
Compute .
Sum to find the total net entropy change: .
,
02 The student calculates entropy changes using temperatures in degrees Celsius instead of converting them to absolute temperatures in Kelvin.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
with temperatures in Kelvin:
Because entropy is defined by , the temperature must be on the thermodynamic absolute scale in Kelvin. Using degrees Celsius makes the ratio completely incorrect (for instance, , whereas in Kelvin it is ).
- Step 3Correct
Your method of summing the individual entropy changes was sound, but the numerical result was affected by using Celsius temperatures in the preceding step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied the conservation of thermal energy to equate heat lost and heat gained.
You accounted for both the water and the aluminum calorimeter cup in the cold reservoir.
You recalled the correct formula for a constant heat capacity process.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the temperature ratio in the logarithmic entropy formula as scale-independent, forgetting that only temperature differences are equivalent between Celsius and Kelvin, whereas ratios require absolute temperature in Kelvin.
REASONING PATH
Your ACEpath teacher’s suggested approach- Temperature Differences vs. Ratios
In , is identical in and . In or any gas law, temperatures appear as individual values or ratios and must be in Kelvin.
Whenever temperature enters a quotient, exponent, or logarithm, convert all temperatures to Kelvin first by adding .
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert all temperatures to Kelvin: , , and .
Compute the entropy change of the copper cylinder: .
Compute the entropy change of the cold reservoir (water plus cup): .
Sum the component changes to find the net entropy change of the universe: .
(or ),
03 The student misapplies the isothermal heat transfer entropy formula ΔS = Q / T by dividing total heat by the initial temperature rather than integrating mc dT / T.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
,
- Step 3Correct
You used the isothermal reservoir formula with the initial temperatures. Because the temperature of each substance changes continuously as heat is transferred, you must integrate , giving .
- Step 4Correct
Your sum correctly adds the component entropy changes, but the numerical result is affected by the incorrect formula used in the previous step.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly set up the heat-exchange equilibrium equation to solve for the final temperature.
You properly converted Celsius temperatures into Kelvin before evaluating thermodynamic expressions.
You recognized that the total entropy change of the isolated system is the sum of the entropy changes of its interacting parts.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou assumed that the entropy change of a finite body experiencing a temperature change can be computed using , dividing by the initial temperature. That expression only holds for an ideal isothermal thermal reservoir whose temperature remains constant while exchanging heat. When a substance with heat capacity changes temperature from to , its entropy change requires integration: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Temperature-Varying Substance vs. Reservoir
For an ideal thermal reservoir at constant temperature , . For a body with heat capacity changing temperature from to , .
Check whether the object's temperature changes during the process. If it changes, always use the logarithmic formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the entropy change for the cooling copper cylinder using its heat capacity : .
Calculate the entropy change for the warming cold mixture (water + calorimeter) with : .
Sum the two changes to find the net entropy generation of the isolated universe: (or using ).
(or ),
Lock it in
When is the heat capacity of a calorimeter vessel included in thermal equilibrium equations?
Whenever the vessel's mass and specific heat (or water equivalent) are provided. It shares the initial temperature and equilibrium temperature with the fluid inside.
Similar question
A brass weight () at is placed into an aluminum cup of mass () containing of water () at . Calculate the final equilibrium temperature in .
Answer
. Key steps: , , . . .
A copper block of heat capacity at is placed in thermal contact with an identical copper block at inside an insulated container. Find the final equilibrium temperature and the total entropy change .
Answer
, . Key steps: Equal heat capacities give . ; . .
An electrical heater delivers of heat to an insulated system consisting of of water and a glass beaker (), initially at . Calculate the temperature rise and the net change in entropy of the system .
Answer
(), . Key steps: . . .