Resources

A sinusoidal transverse wave travels along a taut horizontal string under constant tension. A position-displacement graph of the string at a fixed instant t=0 st = 0\text{ s} plots vertical displacement yy in centimeters against horizontal position xx in meters. The curve passes through the origin (0,0)(0, 0) with a positive slope, reaches its first crest of y=+4.50 cmy = +4.50\text{ cm} at x=0.300 mx = 0.300\text{ m}, crosses y=0y = 0 at x=0.600 mx = 0.600\text{ m}, reaches a trough of y=−4.50 cmy = -4.50\text{ cm} at x=0.900 mx = 0.900\text{ m}, and completes one full spatial cycle at x=1.20 mx = 1.20\text{ m}. A separate displacement-time graph for the particle at x=0x = 0 shows that it completes 5.005.00 complete vertical oscillations in 2.00 s2.00\text{ s}. Determine: (a) the amplitude AA, (b) the wavelength λ\lambda, (c) the frequency ff, and (d) the propagation speed vv of the wave.

Answer and steps

Final answer

(a) A=4.50 cmA = 4.50\text{ cm}, (b) λ=1.20 m\lambda = 1.20\text{ m}, (c) f=2.50 Hzf = 2.50\text{ Hz}, (d) v=3.00 m/sv = 3.00\text{ m/s}

Steps

01

Identify the Amplitude (AA)

The amplitude represents the maximum magnitude of displacement of a particle on the string from its central equilibrium position (y=0 cmy = 0\text{ cm}):

  • The equilibrium level is y=0 cmy = 0\text{ cm}.
  • The peak vertical displacement at the crest is ymax=+4.50 cmy_{\text{max}} = +4.50\text{ cm}, and at the trough it is ymin=−4.50 cmy_{\text{min}} = -4.50\text{ cm}.

A=∣ymax∣=4.50 cmA = |y_{\text{max}}| = 4.50\text{ cm}

Common Pitfall: Do not confuse the total peak-to-trough vertical distance (2A=9.00 cm2A = 9.00\text{ cm}) with the amplitude (AA). The amplitude is measured from the equilibrium line to either a crest or a trough.


02

Determine the Wavelength (λ\lambda)

A position-displacement graph (yy vs. xx) acts like a "snapshot" of the entire wave frozen at an instant (t=0 st = 0\text{ s}). The wavelength λ\lambda is the spatial length of one complete wave cycle:

  • The wave starts at the origin x=0 mx = 0\text{ m} with an upward slope.
  • It returns to zero with the same positive slope after one full cycle at x=1.20 mx = 1.20\text{ m}.

λ=1.20 m−0 m=1.20 m\lambda = 1.20\text{ m} - 0\text{ m} = 1.20\text{ m}


03

Determine the Frequency (ff)

The displacement-time graph tracks the motion of a single point on the string over time. Frequency is the number of complete cycles executed per unit time:

f=Number of cyclesΔt=5.00 cycles2.00 s=2.50 Hzf = \frac{\text{Number of cycles}}{\Delta t} = \frac{5.00\text{ cycles}}{2.00\text{ s}} = 2.50\text{ Hz}


04

Calculate the Wave Propagation Speed (vv)

The speed at which the wave disturbance propagates through the medium relates frequency and wavelength via the wave speed equation:

v=fλv = f \lambda

Substitute the values found above:

v=(2.50 s−1)⋅(1.20 m)=3.00 m/sv = (2.50\text{ s}^{-1}) \cdot (1.20\text{ m}) = 3.00\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the amplitude with the peak-to-peak displacement, doubling the true amplitude and carrying the correct wavelength and frequency through to wave speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=4.50 cm−(−4.50 cm)=9.00 cmA = 4.50\text{ cm} - (-4.50\text{ cm}) = 9.00\text{ cm}

    Correct

    A=ymax−yeq=4.50 cm−0 cm=4.50 cmA = y_{\text{max}} - y_{\text{eq}} = 4.50\text{ cm} - 0\text{ cm} = 4.50\text{ cm}

    You calculated the total peak-to-peak vertical distance (2A2A) rather than the wave amplitude. Amplitude is measured from the equilibrium line (y=0y = 0) to the maximum displacement (crest), which is 4.50 cm4.50\text{ cm}.

  2. Step 2

    λ=1.20 m\lambda = 1.20\text{ m}

  3. Step 3

    f=5.002.00 s=2.50 Hzf = \frac{5.00}{2.00\text{ s}} = 2.50\text{ Hz}

  4. Step 4

    v=λf=(1.20 m)(2.50 Hz)=3.00 m/sv = \lambda f = (1.20\text{ m})(2.50\text{ Hz}) = 3.00\text{ m/s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly read the wavelength λ=1.20 m\lambda = 1.20\text{ m} from the spatial waveform.

You correctly calculated the wave frequency f=2.50 Hzf = 2.50\text{ Hz} from the temporal oscillation count.

You correctly used the wave speed equation v=λfv = \lambda f to find the propagation speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Peak-to-peak displacement confused with amplitude

You knew the crest and trough values were +4.50 cm+4.50\text{ cm} and −4.50 cm-4.50\text{ cm}, but you subtracted the trough from the crest instead of measuring from the central equilibrium axis.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing peak-to-peak displacement (2A2A) with amplitude (AA). In wave mechanics, amplitude is defined as the maximum displacement of a particle from its equilibrium position, not the full span from crest to trough.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Amplitude Relative to Equilibrium
  • For symmetric sinusoidal motion centered at y=0y = 0, A=ymax=ycrest−ytrough2A = y_{\text{max}} = \frac{y_{\text{crest}} - y_{\text{trough}}}{2}.

  • Always check whether your vertical dimension is measured from the centerline (AA) or between the extremes (2A2A).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the equilibrium level of the string: yeq=0 cmy_{\text{eq}} = 0\text{ cm}.

  2. Identify the crest position: ymax=+4.50 cmy_{\text{max}} = +4.50\text{ cm}.

  3. Compute amplitude from equilibrium: A=4.50 cm−0 cm=4.50 cmA = 4.50\text{ cm} - 0\text{ cm} = 4.50\text{ cm} (or divide the peak-to-peak span 9.00 cm9.00\text{ cm} by 22).

Final answer

(a) A=4.50 cmA = 4.50\text{ cm}, (b) λ=1.20 m\lambda = 1.20\text{ m}, (c) f=2.50 Hzf = 2.50\text{ Hz}, (d) v=3.00 m/sv = 3.00\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between crest-to-equilibrium (AA) and crest-to-trough (2A2A).

  • Practice labeling waveform graphs by marking the equilibrium axis before reading vertical dimensions.

OverviewACEpath Teacher's Diagnosis

02 The student takes the position of the first crest as the full wavelength instead of one quarter of a cycle, leading to an understated wavelength and speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=4.50 cmA = 4.50\text{ cm}

  2. Step 2

    λ=0.300 m\lambda = 0.300\text{ m}

    Correct

    λ=1.20 m\lambda = 1.20\text{ m}

    You recorded the position of the first crest (x=0.300 mx = 0.300\text{ m}) as the wavelength. Starting from equilibrium with a positive slope, reaching the first crest represents only one quarter of a cycle (14λ=0.300 m\frac{1}{4}\lambda = 0.300\text{ m}). A full spatial cycle is completed at x=1.20 mx = 1.20\text{ m}, so λ=1.20 m\lambda = 1.20\text{ m}.

  3. Step 3

    f=5.002.00 s=2.50 Hzf = \frac{5.00}{2.00\text{ s}} = 2.50\text{ Hz}

  4. Step 4

    v=λf=(0.300 m)(2.50 Hz)=0.750 m/sv = \lambda f = (0.300\text{ m})(2.50\text{ Hz}) = 0.750\text{ m/s}

    Correct

    v=fλ=(2.50 Hz)(1.20 m)=3.00 m/sv = f\lambda = (2.50\text{ Hz})(1.20\text{ m}) = 3.00\text{ m/s}

    Your formula v=λfv = \lambda f and arithmetic are correct, but your final numerical answer was affected by the incorrect wavelength value from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the amplitude from the peak vertical displacement.

You correctly calculated the wave frequency from the time-displacement oscillation data.

You used the correct relationship between wave speed, frequency, and wavelength (v=fλv = f\lambda).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Crest position mistaken for wavelength

You read the horizontal coordinate of the first peak instead of tracking one full repetitive spatial cycle.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a quarter-cycle landmark (equilibrium to first crest) on a spatial snapshot graph with a complete spatial wavelength (λ\lambda).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fractions of a Sine Wave Cycle
  • For a sinusoidal wave starting at y=0y = 0 with positive slope: first crest is at 14λ\frac{1}{4}\lambda, next zero-crossing is at 12λ\frac{1}{2}\lambda, trough is at 34λ\frac{3}{4}\lambda, and the full cycle completes at λ\lambda.

  • Check whether the chosen point has the exact same value and direction of change as your starting point.

Wavelength Identification
  • Wavelength λ\lambda must be measured between two consecutive points with identical phase (crest to crest, trough to trough, or identical zero-crossings).

  • Measure crest-to-crest or trace from (0,0)(0,0) through one crest and one trough until the curve returns to y=0y=0 rising upward.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify one full spatial cycle on the y-xy\text{-}x position graph: starting at x=0x = 0 with an upward slope, the wave finishes one complete crest and one complete trough at x=1.20 mx = 1.20\text{ m}, so λ=1.20 m\lambda = 1.20\text{ m}.

  2. Substitute the corrected wavelength and the frequency into the wave speed formula: v=fλ=(2.50 Hz)(1.20 m)=3.00 m/sv = f\lambda = (2.50\text{ Hz})(1.20\text{ m}) = 3.00\text{ m/s}.

Final answer

(a) A=4.50 cmA = 4.50\text{ cm}, (b) λ=1.20 m\lambda = 1.20\text{ m}, (c) f=2.50 Hzf = 2.50\text{ Hz}, (d) v=3.00 m/sv = 3.00\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the spatial quarter-cycle points of a standard sine wave on a snapshot graph.

  • Practice distinguishing crest location from wavelength across different wave starting phases.

OverviewACEpath Teacher's Diagnosis

03 The student computes the period T instead of the frequency f and substitutes T into the wave speed formula as v = λT.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A=4.50 cmA = 4.50\text{ cm}

  2. Step 2

    λ=1.20 m\lambda = 1.20\text{ m}

  3. Step 3

    f=2.00 s5.00=0.400 Hzf = \frac{2.00\text{ s}}{5.00} = 0.400\text{ Hz}

    Correct

    f=NΔt=5.00 cycles2.00 s=2.50 Hzf = \frac{N}{\Delta t} = \frac{5.00\text{ cycles}}{2.00\text{ s}} = 2.50\text{ Hz}

    You divided total time by the number of cycles, which gives the period T=0.400 sT = 0.400\text{ s}, rather than dividing cycles by time to find the frequency ff.

  4. Step 4

    v=λf=(1.20 m)(0.400 Hz)=0.480 m/sv = \lambda f = (1.20\text{ m})(0.400\text{ Hz}) = 0.480\text{ m/s}

    Correct

    v=λf=(1.20 m)(2.50 Hz)=3.00 m/sv = \lambda f = (1.20\text{ m})(2.50\text{ Hz}) = 3.00\text{ m/s}

    You applied the wave speed equation v=λfv = \lambda f correctly, but your numerical answer was affected by the incorrect frequency from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly read the amplitude AA and wavelength λ\lambda from the spatial waveform graph.

You selected the correct formula v=λfv = \lambda f to relate propagation speed, wavelength, and frequency.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal Confusion (Period vs. Frequency)

You calculated T=ΔtN=0.400 sT = \frac{\Delta t}{N} = 0.400\text{ s} and attached the unit Hz\text{Hz} to it instead of inverting it to get f=1Tf = \frac{1}{T}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing period TT (time per cycle, measured in seconds) with frequency ff (cycles per unit time, measured in hertz).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the Units of Frequency
  • Frequency has units of inverse seconds: 1 Hz=1 s−1=cyclesseconds1\text{ Hz} = 1\text{ s}^{-1} = \frac{\text{cycles}}{\text{seconds}}.

  • Always place the number of cycles in the numerator and time in the denominator: f=NΔtf = \frac{N}{\Delta t}.

Recall the Reciprocal Relationship
  • f=1Tf = \frac{1}{T} and T=1fT = \frac{1}{f}.

  • If you compute time per cycle (T=0.400 sT = 0.400\text{ s}), take the reciprocal to find f=10.400 s=2.50 Hzf = \frac{1}{0.400\text{ s}} = 2.50\text{ Hz} before calculating wave speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. f=cyclesΔt=5.002.00 s=2.50 Hzf = \frac{\text{cycles}}{\Delta t} = \frac{5.00}{2.00\text{ s}} = 2.50\text{ Hz}

  2. v=λf=(1.20 m)(2.50 Hz)=3.00 m/sv = \lambda f = (1.20\text{ m})(2.50\text{ Hz}) = 3.00\text{ m/s}

Final answer

(a) A=4.50 cmA = 4.50\text{ cm}, (b) λ=1.20 m\lambda = 1.20\text{ m}, (c) f=2.50 Hzf = 2.50\text{ Hz}, (d) v=3.00 m/sv = 3.00\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that the quantity you compute matches its dimensional unit: seconds/cycles\text{seconds}/\text{cycles} is period TT, while cycles/second\text{cycles}/\text{second} is frequency ff.

  • Practice distinguishing spatial snapshots (yy vs. xx, giving λ\lambda) from temporal graphs (yy vs. tt, giving TT or ff).

Lock it in

Similar question

01

A transverse wave on a cord has a crest at y=+0.80 my = +0.80\text{ m} and an adjacent trough at y=−0.80 my = -0.80\text{ m}. The distance between two successive crests is 2.4 m2.4\text{ m}. Determine the amplitude and wavelength of the wave.

Answer

A=0.80 mA = 0.80\text{ m}, λ=2.4 m\lambda = 2.4\text{ m}. The amplitude is the displacement from equilibrium y=0y = 0 to a crest (A=0.80 mA = 0.80\text{ m}). The distance between successive crests defines one full cycle, giving λ=2.4 m\lambda = 2.4\text{ m}.

02

A sinusoidal wave is graphed with vertical displacement yy in millimeters versus horizontal position xx in meters. The peak-to-peak vertical height between crest and trough is 14.0 mm14.0\text{ mm}, and the horizontal distance between a crest and the immediate next trough is 1.50 m1.50\text{ m}. If the wave speed is 12.0 m/s12.0\text{ m/s}, find the amplitude AA and the frequency ff.

Answer

A=7.00 mmA = 7.00\text{ mm}, f=4.00 Hzf = 4.00\text{ Hz}. Step 1: A=14.0 mm2=7.00 mmA = \frac{14.0\text{ mm}}{2} = 7.00\text{ mm}. Step 2: The crest-to-trough distance is half a wavelength, so λ2=1.50 m  ⟹  λ=3.00 m\frac{\lambda}{2} = 1.50\text{ m} \implies \lambda = 3.00\text{ m}. Step 3: f=vλ=12.0 m/s3.00 m=4.00 Hzf = \frac{v}{\lambda} = \frac{12.0\text{ m/s}}{3.00\text{ m}} = 4.00\text{ Hz}.

03

A wave oscillates symmetrically about a non-zero baseline: its crests reach y=+7.0 cmy = +7.0\text{ cm} and its troughs reach y=+1.0 cmy = +1.0\text{ cm}. (a) Find the equilibrium level yeqy_{\text{eq}} and the amplitude AA. (b) If a floating marker executes 1818 complete cycles in 6.0 s6.0\text{ s} and adjacent crests are 0.50 m0.50\text{ m} apart, find the wave propagation speed vv.

Answer

(a) yeq=4.0 cmy_{\text{eq}} = 4.0\text{ cm}, A=3.0 cmA = 3.0\text{ cm}; (b) v=1.5 m/sv = 1.5\text{ m/s}. Step 1: Equilibrium is the midpoint yeq=7.0+1.02=4.0 cmy_{\text{eq}} = \frac{7.0 + 1.0}{2} = 4.0\text{ cm}. Step 2: A=7.0−4.0=3.0 cmA = 7.0 - 4.0 = 3.0\text{ cm} (or 7.0−1.02=3.0 cm\frac{7.0 - 1.0}{2} = 3.0\text{ cm}). Step 3: f=186.0 s=3.0 Hzf = \frac{18}{6.0\text{ s}} = 3.0\text{ Hz}, and λ=0.50 m\lambda = 0.50\text{ m}. Step 4: v=fλ=(3.0 Hz)(0.50 m)=1.5 m/sv = f\lambda = (3.0\text{ Hz})(0.50\text{ m}) = 1.5\text{ m/s}.

Loading workspace…