Resources

A common student misconception posits that 'a sound with twice the perceived loudness must have twice the wave amplitude.' Psychoacoustic experiments establish that for a 1.00 kHz1.00\text{ kHz} tone, an increase of approximately +10.0 dB+10.0\text{ dB} in sound level corresponds to a doubling of perceived subjective loudness (L2=2L1L_2 = 2L_1). Assuming this psychoacoustic model holds: (a) calculate the exact factor by which the acoustic intensity II must increase to double the perceived loudness; (b) calculate the factor by which the physical wave displacement amplitude smaxs_{\text{max}} must increase to achieve this doubling of perceived loudness; and (c) state whether doubling the wave amplitude doubles, quadruples, or otherwise changes the physical intensity.

Answer and steps

Final answer

(a) Intensity increases by a factor of 10.010.0; (b) Wave amplitude smaxs_{\text{max}} increases by a factor of 10≈3.16\sqrt{10} \approx 3.16; (c) Doubling the wave amplitude (smax,2=2smax,1s_{\text{max}, 2} = 2s_{\text{max}, 1}) quadruples the physical intensity (I2=4I1I_2 = 4I_1) and raises the sound level by only +6.02 dB+6.02\text{ dB}, which is less than the +10.0 dB+10.0\text{ dB} required to double perceived loudness.

Steps

Part (a): Factor by which Acoustic Intensity Increases

The sound level β\beta in decibels (dB\text{dB}) is defined in terms of physical intensity II and reference intensity I0=10−12 W/m2I_0 = 10^{-12}\text{ W/m}^2:

β=10log⁡10(II0)\beta = 10 \log_{10}\left(\frac{I}{I_0}\right)

An increase in sound level Δβ=β2−β1\Delta \beta = \beta_2 - \beta_1 is related to the ratio of intensities by:

Δβ=10log⁡10(I2I1)\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right)

Given that perceived subjective loudness doubles when the sound level increases by Δβ=+10.0 dB\Delta \beta = +10.0\text{ dB}:

10.0=10log⁡10(I2I1)10.0 = 10 \log_{10}\left(\frac{I_2}{I_1}\right)

log⁡10(I2I1)=1.00\log_{10}\left(\frac{I_2}{I_1}\right) = 1.00

I2I1=101=10.0\frac{I_2}{I_1} = 10^1 = 10.0

Therefore, the acoustic intensity must increase by a factor of 10.010.0 to double the perceived loudness.


Part (b): Factor by which Displacement Amplitude Increases

For a sinusoidal longitudinal sound wave traveling through a medium of density ρ\rho with speed vv at an angular frequency ω\omega, the intensity is directly proportional to the square of the displacement amplitude smaxs_{\text{max}}:

I=12ρvω2smax2  ⟹  I∝smax2I = \frac{1}{2}\rho v \omega^2 s_{\text{max}}^2 \implies I \propto s_{\text{max}}^2

Taking the ratio of intensities for two waves with the same frequency in the same medium:

I2I1=(smax,2smax,1)2\frac{I_2}{I_1} = \left(\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}}\right)^2

Solving for the ratio of the amplitudes:

smax,2smax,1=I2I1=10.0≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10.0} \approx 3.16

Thus, the physical wave displacement amplitude must increase by a factor of 10≈3.16\sqrt{10} \approx 3.16 to double the perceived loudness.


Part (c): Effect of Doubling the Wave Amplitude

Because intensity depends on the square of amplitude (I∝smax2I \propto s_{\text{max}}^2), setting smax,2=2smax,1s_{\text{max}, 2} = 2s_{\text{max}, 1} results in:

I2I1=(2smax,1smax,1)2=4\frac{I_2}{I_1} = \left(\frac{2s_{\text{max}, 1}}{s_{\text{max}, 1}}\right)^2 = 4

Doubling the wave amplitude quadruples the physical intensity.

The resulting change in sound level is:

Δβ=10log⁡10(4)≈10(0.602)=+6.02 dB\Delta \beta = 10 \log_{10}(4) \approx 10(0.602) = +6.02\text{ dB}

Common Pitfall: Students often confuse perceived loudness (a psychoacoustic sensation) with amplitude or intensity (objective physical quantities). Because a subjective doubling of loudness requires a +10.0 dB+10.0\text{ dB} increase (a 1010-fold increase in intensity), doubling the amplitude yields only +6.02 dB+6.02\text{ dB} (a 44-fold increase in intensity), which falls well short of doubling perceived loudness.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets a 10 dB increase as a factor of 2 increase in intensity, confusing perceived loudness doubling with intensity doubling.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δβ=+10.0 dB corresponds to doubling loudness  ⟹  I2I1=2\Delta \beta = +10.0\text{ dB} \text{ corresponds to doubling loudness} \implies \frac{I_2}{I_1} = 2

    Correct

    Δβ=10log⁡10(I2I1)=+10.0 dB  ⟹  I2I1=101=10.0\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) = +10.0\text{ dB} \implies \frac{I_2}{I_1} = 10^1 = 10.0

    You treated doubling subjective loudness as doubling the physical intensity (I2/I1=2I_2/I_1 = 2). Sound level in decibels follows a logarithmic relationship: Δβ=10log⁡10(I2/I1)\Delta \beta = 10 \log_{10}(I_2/I_1). Substituting Δβ=+10.0 dB\Delta \beta = +10.0\text{ dB} gives log⁡10(I2/I1)=1.0\log_{10}(I_2/I_1) = 1.0, which means physical intensity must increase by a factor of 10.010.0.

  2. Step 2

    I∝smax2  ⟹  smax,2smax,1=2≈1.41I \propto s_{\text{max}}^2 \implies \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{2} \approx 1.41

    Correct

    smax,2smax,1=I2I1=10.0≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10.0} \approx 3.16

    Your relationship smax∝Is_{\text{max}} \propto \sqrt{I} is completely sound, but you carried over the incorrect intensity ratio I2/I1=2I_2/I_1 = 2 from part (a). Using the correct ratio I2/I1=10.0I_2/I_1 = 10.0 yields 10.0≈3.16\sqrt{10.0} \approx 3.16.

  3. Step 3

    I∝smax2  ⟹  (2)2=4  ⟹  Doubling amplitude quadruples the physical intensity.I \propto s_{\text{max}}^2 \implies (2)^2 = 4 \implies \text{Doubling amplitude quadruples the physical intensity.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that wave intensity is proportional to the square of displacement amplitude (I∝smax2I \propto s_{\text{max}}^2).

You correctly concluded that doubling displacement amplitude results in a fourfold increase in intensity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating subjective loudness ratio with physical intensity ratio

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated subjective psychological loudness (LL) with objective acoustic intensity (II). While perceived loudness doubles with every +10 dB+10\text{ dB} increase, decibels represent a logarithmic scale of physical intensity, meaning a +10 dB+10\text{ dB} shift corresponds to a factor-of-1010 increase in intensity (10Δβ/1010^{\Delta \beta / 10}), not a factor of 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel to Intensity Ratio
  • An increase of Δβ dB\Delta \beta\text{ dB} corresponds to an intensity ratio of I2I1=10Δβ/10\frac{I_2}{I_1} = 10^{\Delta \beta / 10}.

  • Always convert a given change in sound level (dB\text{dB}) into an intensity ratio using the base-1010 exponential definition before doing further algebra.

Subjective vs. Objective Quantities
  • Perceived loudness is a psychoacoustic sensation, whereas intensity and amplitude are physical field quantities.

  • Do not set I2/I1=2I_2 / I_1 = 2 just because loudness doubles; use the specified decibel change Δβ=+10 dB\Delta \beta = +10\text{ dB} to find the true physical ratio.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Relate the sound level increase to intensity: Δβ=10log⁡10(I2I1)=10.0 dB\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) = 10.0\text{ dB}.

  2. Solve for the intensity ratio: log⁡10(I2I1)=1.00  ⟹  I2I1=101=10.0\log_{10}\left(\frac{I_2}{I_1}\right) = 1.00 \implies \frac{I_2}{I_1} = 10^1 = 10.0.

  3. Use the proportionality I∝smax2I \propto s_{\text{max}}^2 to determine the amplitude ratio: smax,2smax,1=I2I1=10.0≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10.0} \approx 3.16.

Final answer

(a) 10.010.0; (b) 10≈3.16\sqrt{10} \approx 3.16; (c) quadruples

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the logarithmic definition of sound level: β=10log⁡10(I/I0)\beta = 10 \log_{10}(I/I_0).

  • Practice converting standard decibel increments (+3 dB≈×2+3\text{ dB} \approx \times 2, +10 dB=×10+10\text{ dB} = \times 10, +20 dB=×100+20\text{ dB} = \times 100) into their physical intensity factors.

  • Solve problems that distinguish psychoacoustic sensations (loudness, pitch) from wave mechanics (intensity, frequency, amplitude).

OverviewACEpath Teacher's Diagnosis

02 The student assumes intensity is directly proportional to displacement amplitude rather than to its square.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δβ=10log⁡10(I2I1)  ⟹  10.0=10log⁡10(I2I1)  ⟹  log⁡10(I2I1)=1  ⟹  I2I1=10\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) \implies 10.0 = 10 \log_{10}\left(\frac{I_2}{I_1}\right) \implies \log_{10}\left(\frac{I_2}{I_1}\right) = 1 \implies \frac{I_2}{I_1} = 10

  2. Step 2

    I∝smax  ⟹  smax,2smax,1=I2I1=10I \propto s_{\text{max}} \implies \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \frac{I_2}{I_1} = 10

    Correct

    I∝smax2  ⟹  smax,2smax,1=I2I1=10.0≈3.16I \propto s_{\text{max}}^2 \implies \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10.0} \approx 3.16

    Wave intensity is directly proportional to the square of the displacement amplitude (I∝smax2I \propto s_{\text{max}}^2), not to amplitude itself. Because of this square relationship, the amplitude ratio is 10≈3.16\sqrt{10} \approx 3.16.

  3. Step 3

    "Since I is directly proportional to smaxs_{\text{max}}, doubling the wave amplitude doubles the physical intensity."

    Correct

    "Because I∝smax2I \propto s_{\text{max}}^2, doubling the wave amplitude quadruples the physical intensity (I2=4I1I_2 = 4I_1)."

    Carrying over the linear proportionality assumption led you to state that intensity doubles. With I∝smax2I \propto s_{\text{max}}^2, scaling amplitude by 22 scales intensity by 22=42^2 = 4.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the change in decibel sound level to the intensity ratio using logarithmic properties.

You solved the logarithmic equation accurately to find an intensity factor of 1010.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Amplitude-intensity proportionality misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated wave intensity as directly proportional to displacement amplitude (I∝smaxI \propto s_{\text{max}}) rather than proportional to the square of amplitude (I∝smax2I \propto s_{\text{max}}^2), missing the quadratic energy-amplitude relationship fundamental to harmonic waves.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Intensity and Amplitude Relationship
  • For harmonic mechanical waves, intensity is proportional to the square of the displacement amplitude: I=12ρvω2smax2  ⟹  I∝smax2I = \frac{1}{2}\rho v \omega^2 s_{\text{max}}^2 \implies I \propto s_{\text{max}}^2.

  • Always square the amplitude factor when determining intensity changes, and take the square root of an intensity ratio when finding the required amplitude factor.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that sound wave intensity depends on amplitude squared: I=12ρvω2smax2I = \frac{1}{2}\rho v \omega^2 s_{\text{max}}^2, so I2I1=(smax,2smax,1)2\frac{I_2}{I_1} = \left(\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}}\right)^2.

  2. Substitute I2I1=10.0\frac{I_2}{I_1} = 10.0 to solve for the amplitude factor: smax,2smax,1=10.0≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{10.0} \approx 3.16.

  3. For part (c), substitute smax,2=2smax,1s_{\text{max}, 2} = 2 s_{\text{max}, 1} into the intensity ratio: I2I1=(2)2=4\frac{I_2}{I_1} = (2)^2 = 4. Thus, doubling the wave amplitude quadruples the physical intensity.

Final answer

(a) Factor of 10.010.0; (b) Factor of 10≈3.16\sqrt{10} \approx 3.16; (c) Quadruples the physical intensity (I2=4I1I_2 = 4I_1).

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy density equation for traveling waves to see why energy and intensity scale with A2A^2 (or smax2s_{\text{max}}^2).

  • Practice converting between sound level changes (Δβ\Delta \beta), intensity ratios (I2/I1I_2 / I_1), and amplitude ratios (s2/s1s_2 / s_1).

OverviewACEpath Teacher's Diagnosis

03 The student squares the intensity factor instead of taking the square root when solving for the amplitude factor from I ∝ s_max².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δβ=10log⁡10(I2I1)  ⟹  10.0=10log⁡10(I2I1)  ⟹  I2I1=10\Delta \beta = 10 \log_{10}\left(\frac{I_2}{I_1}\right) \implies 10.0 = 10 \log_{10}\left(\frac{I_2}{I_1}\right) \implies \frac{I_2}{I_1} = 10

  2. Step 2

    I∝smax2  ⟹  smax,2smax,1=(I2I1)2=102=100I \propto s_{\text{max}}^2 \implies \frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \left(\frac{I_2}{I_1}\right)^2 = 10^2 = 100

    Correct

    smax,2smax,1=I2I1=10≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{10} \approx 3.16

    Because intensity is proportional to the square of displacement amplitude (I∝smax2I \propto s_{\text{max}}^2), displacement amplitude is proportional to the square root of intensity (smax∝Is_{\text{max}} \propto \sqrt{I}). You squared the intensity ratio instead of taking its square root.

  3. Step 3

    I∝smax2, If amplitude doubles, intensity changes by 22=4  ⟹  It quadruples the physical intensity.I \propto s_{\text{max}}^2 \text{, If amplitude doubles, intensity changes by } 2^2 = 4 \implies \text{It quadruples the physical intensity.}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the logarithmic decibel formula to calculate a 10-fold increase in acoustic intensity.

You recognized the proportional relationship I∝smax2I \propto s_{\text{max}}^2 across multiple parts of the problem.

You correctly concluded that doubling displacement amplitude quadruples physical wave intensity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic inversion of power relation

No, this is an algebraic inversion error when solving for the base variable from a squared proportionality relation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When solving for the base quantity smaxs_{\text{max}} from the proportional relationship I∝smax2I \propto s_{\text{max}}^2, the exponent must be inverted (smax∝I1/2=Is_{\text{max}} \propto I^{1/2} = \sqrt{I}). Instead, you carried the exponent over directly as an exponent on II, calculating I2I^2 rather than I\sqrt{I}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolating Variables in Power Relationships
  • If y∝xny \propto x^n, then x∝y1/nx \propto y^{1/n}. Specifically, if I∝s2I \propto s^2, then s∝Is \propto \sqrt{I}.

  • Always isolate the requested variable first before substituting numerical ratios: write s2s1=I2I1\frac{s_2}{s_1} = \sqrt{\frac{I_2}{I_1}} before plugging in values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express the amplitude ratio by taking the square root of both sides of I2I1=(smax,2smax,1)2\frac{I_2}{I_1} = \left(\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}}\right)^2: smax,2smax,1=I2I1\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}}

  2. Substitute I2I1=10\frac{I_2}{I_1} = 10: smax,2smax,1=10≈3.16\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{10} \approx 3.16

Final answer

(a) Factor of 10.010.0; (b) Factor of 10≈3.16\sqrt{10} \approx 3.16; (c) Quadruples

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write the explicit formula for the unknown ratio before plugging in numbers so you do not accidentally invert power operations.

  • Review the distinction between physical intensity (I∝s2I \propto s^2), sound level (logarithmic β\beta), and perceived loudness (subjective doubling per +10 dB+10\text{ dB}).

Lock it in

Similar question

01

A sound engineer wants a 1.00 kHz1.00\text{ kHz} tone to sound four times as loud (L2=4L1L_2 = 4L_1). Assuming each factor-of-two increase in loudness requires a +10.0 dB+10.0\text{ dB} change: (a) what is the required total change in sound level Δβ\Delta \beta, and (b) by what factor must the acoustic intensity increase?

Answer

(a) Four times as loud is two successive doublings (2×22 \times 2), so Δβ=+10.0 dB+10.0 dB=+20.0 dB\Delta \beta = +10.0\text{ dB} + 10.0\text{ dB} = +20.0\text{ dB}. (b) Using I2I1=10Δβ/10=1020.0/10=102=100\frac{I_2}{I_1} = 10^{\Delta \beta / 10} = 10^{20.0/10} = 10^2 = 100, intensity must increase by a factor of 100100.

02

To achieve a +20.0 dB+20.0\text{ dB} increase in the sound level of a sinusoidal acoustic wave traveling in air, by what factor must the displacement amplitude smaxs_{\text{max}} be increased?

Answer

A sound level increase of +20.0 dB+20.0\text{ dB} corresponds to an intensity ratio of I2I1=1020/10=100\frac{I_2}{I_1} = 10^{20/10} = 100. Since I∝smax2I \propto s_{\text{max}}^2, the amplitude ratio is smax,2smax,1=I2I1=100=10\frac{s_{\text{max}, 2}}{s_{\text{max}, 1}} = \sqrt{\frac{I_2}{I_1}} = \sqrt{100} = 10. The amplitude must increase by a factor of 1010.

03

A loudspeaker's diaphragm increases its oscillation amplitude by a factor of 3.003.00. (a) By what factor does the radiated acoustic intensity increase? (b) By how many decibels does the sound level β\beta increase? (c) Does this amplitude increase suffice to double the perceived loudness?

Answer

(a) Since I∝smax2I \propto s_{\text{max}}^2, the intensity increases by 3.002=9.003.00^2 = 9.00. (b) Δβ=10log⁡10(9.00)≈10(0.954)=+9.54 dB\Delta \beta = 10 \log_{10}(9.00) \approx 10(0.954) = +9.54\text{ dB}. (c) No; doubling perceived loudness requires approximately +10.0 dB+10.0\text{ dB} (I2/I1=10.0I_2/I_1 = 10.0), and +9.54 dB+9.54\text{ dB} falls slightly short.

Loading workspace…