Resources

An aircraft carrier steams due north at a constant speed of vc=15.0 m/sv_c = 15.0\text{ m/s} relative to the ocean surface. A target drone is launched from the flight deck with an initial velocity relative to the ship of magnitude v0,d/c=60.0 m/sv_{0, d/c} = 60.0\text{ m/s} at an elevation angle of 30.0∘30.0^\circ above the horizontal, directed toward the starboard side (due east relative to the ship's coordinate frame). Neglecting air resistance and taking g=9.80 m/s2g = 9.80\text{ m/s}^2: (a) determine the initial velocity vector of the drone relative to the water v⃗0,d/w\vec{v}_{0, d/w} in component form, (b) calculate the total time of flight TT before the drone splashes into the sea at the same vertical level as the launch, and (c) find the total horizontal displacement r⃗d/w\vec{r}_{d/w} of the drone relative to the ocean surface upon impact.

Answer and steps

Final answer

(a) v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s} (where i^\hat{i} is east, j^\hat{j} is north, and k^\hat{k} is vertically upward); (b) T=6.12 sT = 6.12\text{ s}; (c) r⃗d/w=318i^+91.8j^ m\vec{r}_{d/w} = 318\hat{i} + 91.8\hat{j}\text{ m} (magnitude r=331 mr = 331\text{ m} at 16.1∘16.1^\circ north of east).

Steps

01

Set up the 3D coordinate system

Define a standard Cartesian coordinate frame fixed relative to the ocean surface (water):

  • Let i^\hat{i} point due East.
  • Let j^\hat{j} point due North.
  • Let k^\hat{k} point vertically upward.

The velocity of the aircraft carrier relative to the water is directed entirely along the +y+y-axis: v⃗c/w=0i^+15.0j^+0k^ m/s\vec{v}_{c/w} = 0\hat{i} + 15.0\hat{j} + 0\hat{k}\text{ m/s}

02

Determine the launch velocity relative to the ship

The drone is launched at an angle θ=30.0∘\theta = 30.0^\circ above the horizontal plane, directed towards starboard (due East relative to the ship). Its velocity components relative to the carrier are:

  • v0x,d/c=v0,d/ccos⁡30.0∘=60.0⋅32≈51.96 m/sv_{0x, d/c} = v_{0, d/c} \cos 30.0^\circ = 60.0 \cdot \frac{\sqrt{3}}{2} \approx 51.96\text{ m/s}
  • v0y,d/c=0 m/sv_{0y, d/c} = 0\text{ m/s}
  • v0z,d/c=v0,d/csin⁡30.0∘=60.0⋅0.500=30.0 m/sv_{0z, d/c} = v_{0, d/c} \sin 30.0^\circ = 60.0 \cdot 0.500 = 30.0\text{ m/s}

In vector form: v⃗0,d/c=51.96i^+0j^+30.0k^ m/s\vec{v}_{0, d/c} = 51.96\hat{i} + 0\hat{j} + 30.0\hat{k}\text{ m/s}

03

Find the initial velocity relative to the water (Part a)

By the Galilean velocity addition principle, the velocity of the drone relative to the water is: v⃗0,d/w=v⃗0,d/c+v⃗c/w\vec{v}_{0, d/w} = \vec{v}_{0, d/c} + \vec{v}_{c/w}

Summing the respective components: v⃗0,d/w=(51.96+0)i^+(0+15.0)j^+(30.0+0)k^ m/s\vec{v}_{0, d/w} = (51.96 + 0)\hat{i} + (0 + 15.0)\hat{j} + (30.0 + 0)\hat{k}\text{ m/s} v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}

04

Calculate the total time of flight (Part b)

The vertical motion is governed strictly by uniform gravitational acceleration: az=−g=−9.80 m/s2a_z = -g = -9.80\text{ m/s}^2

The vertical position as a function of time tt relative to the launch height (z0=0z_0 = 0) is: z(t)=v0zt−12gt2z(t) = v_{0z} t - \frac{1}{2}gt^2

Setting z(T)=0z(T) = 0 for the return to the launch level (T>0T > 0): T=2v0zg=2⋅30.0 m/s9.80 m/s2≈6.1224 s≈6.12 sT = \frac{2v_{0z}}{g} = \frac{2 \cdot 30.0\text{ m/s}}{9.80\text{ m/s}^2} \approx 6.1224\text{ s} \approx 6.12\text{ s}

Common Pitfall: Remember that the forward motion of the ship imparts a horizontal velocity component (yy-direction) but does not alter the vertical velocity component or the flight duration.

05

Calculate the horizontal displacement relative to the water (Part c)

Since air resistance is neglected, horizontal acceleration is zero in both the xx and yy directions:

  • x(T)=v0xT=(51.96 m/s)(6.1224 s)≈318.1 m≈318 mx(T) = v_{0x} T = (51.96\text{ m/s})(6.1224\text{ s}) \approx 318.1\text{ m} \approx 318\text{ m}
  • y(T)=v0yT=(15.0 m/s)(6.1224 s)≈91.84 m≈91.8 my(T) = v_{0y} T = (15.0\text{ m/s})(6.1224\text{ s}) \approx 91.84\text{ m} \approx 91.8\text{ m}

Thus, the horizontal displacement vector relative to the water is: r⃗d/w=318i^+91.8j^ m\vec{r}_{d/w} = 318\hat{i} + 91.8\hat{j}\text{ m}

To find the magnitude and direction: r=x2+y2=(318.1)2+(91.84)2≈331 mr = \sqrt{x^2 + y^2} = \sqrt{(318.1)^2 + (91.84)^2} \approx 331\text{ m} ϕ=arctan⁡(yx)=arctan⁡(91.84318.1)≈16.1∘ north of east\phi = \arctan\left(\frac{y}{x}\right) = \arctan\left(\frac{91.84}{318.1}\right) \approx 16.1^\circ\text{ north of east}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student ignores the motion of the aircraft carrier when calculating the drone's velocity and displacement relative to the water.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v0x=60.0cos⁡(30.0∘)=51.96 m/s  ⟹  v0z=60.0sin⁡(30.0∘)=30.0 m/s  ⟹  v⃗0,d/w=(52.0i^+30.0k^) m/sv_{0x} = 60.0\cos(30.0^\circ) = 51.96\text{ m/s} \implies v_{0z} = 60.0\sin(30.0^\circ) = 30.0\text{ m/s} \implies \vec{v}_{0, d/w} = (52.0\hat{i} + 30.0\hat{k})\text{ m/s}

    Correct

    v⃗0,d/w=v⃗0,d/c+v⃗c/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = \vec{v}_{0, d/c} + \vec{v}_{c/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}

    You correctly found the components relative to the carrier, but the velocity relative to the water must include the ship's motion of 15.0j^ m/s15.0\hat{j}\text{ m/s} due north via relative velocity addition.

  2. Step 2

    T=2v0zg=2(30.0)9.80=6.12 sT = \frac{2v_{0z}}{g} = \frac{2(30.0)}{9.80} = 6.12\text{ s}

  3. Step 3

    r⃗\vec{r}{d/w} = (v{0x} ×\times T)i^\hat{i} = (51.96 ×\times 6.12)i^\hat{i} = 318$\hat{i} m\text{ m}

    Correct

    r⃗\vec{r}{d/w} = (v{0x}T)i^\hat{i} + (v_{0y}T)j^\hat{j} = 318i^\hat{i} + 91.8\hat{j}$$\text{ m}_$$

    Your calculation for the eastward displacement is correct based on your time of flight, but because the northern velocity component was omitted in part (a), the resulting displacement vector is missing its +y+y component.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly resolved the launch speed into horizontal and vertical components relative to the carrier.

You accurately identified that only the vertical velocity component governs the total flight time.

You correctly applied kinematics along the east direction to find the xx-displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Reference Frame Motion

You treated the drone's velocity relative to the ship as if it were already measured relative to the ocean surface.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked Galilean vector addition for relative velocities (v⃗d/w=v⃗d/c+v⃗c/w\vec{v}_{d/w} = \vec{v}_{d/c} + \vec{v}_{c/w}), forgetting that a projectile launched from a moving platform inherits the platform's velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Relative Velocity Addition
  • v⃗A/C=v⃗A/B+v⃗B/C\vec{v}_{A/C} = \vec{v}_{A/B} + \vec{v}_{B/C}

  • Always add the carrier's velocity vector to the object's relative launch vector before analyzing motion relative to the ground or water.

Complete 3D Position Tracking
  • r⃗(t)=r⃗0+v⃗0t+12a⃗t2\vec{r}(t) = \vec{r}_0 + \vec{v}_0 t + \frac{1}{2}\vec{a}t^2

  • Check that every nonzero initial velocity component (xx, yy, and zz) is accounted for when computing total displacement.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Add the ship's forward velocity along +y+y to the relative launch velocity: v⃗0,d/w=v⃗0,d/c+v⃗c/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = \vec{v}_{0, d/c} + \vec{v}_{c/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}.

  2. Keep the verified flight time T=6.12 sT = 6.12\text{ s} since the ship's motion is purely horizontal and does not affect v0zv_{0z}.

  3. Compute both horizontal displacement components relative to the water: x=(51.96 m/s)(6.12 s)=318 mx = (51.96\text{ m/s})(6.12\text{ s}) = 318\text{ m} and y=(15.0 m/s)(6.12 s)=91.8 my = (15.0\text{ m/s})(6.12\text{ s}) = 91.8\text{ m}.

Final answer

(a) v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}; (b) T=6.12 sT = 6.12\text{ s}; (c) r⃗d/w=318i^+91.8j^ m\vec{r}_{d/w} = 318\hat{i} + 91.8\hat{j}\text{ m} (magnitude 331 m331\text{ m} at 16.1∘16.1^\circ north of east)

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down explicit vector labels for each reference frame before computing components: v⃗object/ground=v⃗object/platform+v⃗platform/ground\vec{v}_{\text{object/ground}} = \vec{v}_{\text{object/platform}} + \vec{v}_{\text{platform/ground}}.

  • Review relative velocity addition when platform motion and launch direction lie along perpendicular axes.

OverviewACEpath Teacher's Diagnosis

02 The student uses the total relative launch speed instead of its vertical component when calculating the time of flight.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v⃗0,d/c=(60.0cos⁡(30.0∘)i^+60.0sin⁡(30.0∘)k^) m/s=(52.0i^+30.0k^) m/s  ⟹  v⃗0,d/w=(52.0i^+15.0j^+30.0k^) m/s\vec{v}_{0, d/c} = (60.0 \cos(30.0^\circ)\hat{i} + 60.0 \sin(30.0^\circ)\hat{k})\text{ m/s} = (52.0\hat{i} + 30.0\hat{k})\text{ m/s} \implies \vec{v}_{0, d/w} = (52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k})\text{ m/s}

  2. Step 2

    T=2v0g=2(60.0)9.80=12.2 sT = \frac{2 v_0}{g} = \frac{2(60.0)}{9.80} = 12.2\text{ s}

    Correct

    T=2v0zg=2(30.0 m/s)9.80 m/s2≈6.12 sT = \frac{2 v_{0z}}{g} = \frac{2(30.0\text{ m/s})}{9.80\text{ m/s}^2} \approx 6.12\text{ s}

    You substituted the total magnitude of the launch speed (v0=60.0 m/sv_0 = 60.0\text{ m/s}) into the time-of-flight formula instead of the vertical component (v0z=30.0 m/sv_{0z} = 30.0\text{ m/s}). Gravity acts exclusively along the vertical axis, so only vertical velocity determines how long the drone remains airborne.

  3. Step 3

    r⃗d/w=(51.96×12.2)i^+(15.0×12.2)j^ m=(634i^+183j^) m\vec{r}_{d/w} = (51.96 \times 12.2)\hat{i} + (15.0 \times 12.2)\hat{j}\text{ m} = (634\hat{i} + 183\hat{j})\text{ m}

    Correct

    r⃗d/w=(51.96×6.1224)i^+(15.0×6.1224)j^ m≈318i^+91.8j^ m\vec{r}_{d/w} = (51.96 \times 6.1224)\hat{i} + (15.0 \times 6.1224)\hat{j}\text{ m} \approx 318\hat{i} + 91.8\hat{j}\text{ m}

    Your kinematic reasoning to find displacement by multiplying constant horizontal velocity components by flight time was completely sound, but the numerical answer is doubled because of the flight time error from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You decomposed the drone's initial relative launch velocity into its proper horizontal and vertical components.

You correctly used Galilean vector addition to find the drone's initial velocity vector relative to the ocean surface.

You recognized that horizontal acceleration is zero and correctly related horizontal displacements to flight time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Velocity Component Misidentification in Kinematics

You wrote T=2v0gT = \frac{2v_0}{g} instead of T=2v0zgT = \frac{2v_{0z}}{g}, using the scalar magnitude of launch speed rather than the vertical component.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the total 3D speed magnitude with the component along the axis of acceleration. Because gravity acts strictly along the vertical direction (zz-axis), the time to rise and fall depends purely on v0zv_{0z}, independent of motion along the xx and yy axes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the Accelerated Dimension
  • Projectiles in uniform gravity have acceleration only along the vertical axis: az=−ga_z = -g, while ax=0a_x = 0 and ay=0a_y = 0.

  • Always explicitly write T=2v0zgT = \frac{2v_{0z}}{g} rather than the shorthand T=2v0gT = \frac{2v_0}{g} to ensure you substitute only the vertical component.

Verify Independence of Orthogonal Axes
  • Motion along orthogonal axes is completely independent.

  • Check whether the forward speed of the ship or the eastward launch speed could physically change when the drone hits the water; since neither contributes to the vertical axis, neither affects flight time.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the vertical component of the launch velocity relative to the water: v0z=30.0 m/sv_{0z} = 30.0\text{ m/s}.

  2. Calculate the flight time using the 1D vertical kinematic equation z(T)=v0zT−12gT2=0  ⟹  T=2(30.0 m/s)9.80 m/s2≈6.1224 sz(T) = v_{0z}T - \frac{1}{2}gT^2 = 0 \implies T = \frac{2(30.0\text{ m/s})}{9.80\text{ m/s}^2} \approx 6.1224\text{ s}.

  3. Calculate the horizontal displacements using the corrected time: x=(51.96 m/s)(6.1224 s)≈318 mx = (51.96\text{ m/s})(6.1224\text{ s}) \approx 318\text{ m} and y=(15.0 m/s)(6.1224 s)≈91.8 my = (15.0\text{ m/s})(6.1224\text{ s}) \approx 91.8\text{ m}.

Final answer

(a) v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}; (b) T=6.12 sT = 6.12\text{ s}; (c) r⃗d/w=318i^+91.8j^ m\vec{r}_{d/w} = 318\hat{i} + 91.8\hat{j}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice labeling velocity components with explicit directional subscripts (v0x,v0y,v0zv_{0x}, v_{0y}, v_{0z}) before substituting them into standard 1D kinematic formulas.

  • Work through multi-dimensional relative motion problems where moving platforms impart velocity along one axis while launch occurs along another.

OverviewACEpath Teacher's Diagnosis

03 The student uses the horizontal velocity component instead of the vertical component to find the flight time by misidentifying the trigonometric functions.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v0x=60.0sin⁡(30.0∘)=30.0 m/s  ⟹  v0z=60.0cos⁡(30.0∘)=51.96 m/sv_{0x} = 60.0 \sin(30.0^\circ) = 30.0\text{ m/s} \implies v_{0z} = 60.0 \cos(30.0^\circ) = 51.96\text{ m/s}

    Correct

    v0x,d/c=60.0cos⁡(30.0∘)≈51.96 m/s  ⟹  v0z,d/c=60.0sin⁡(30.0∘)=30.0 m/sv_{0x, d/c} = 60.0 \cos(30.0^\circ) \approx 51.96\text{ m/s} \implies v_{0z, d/c} = 60.0 \sin(30.0^\circ) = 30.0\text{ m/s}

    The elevation angle of 30.0∘30.0^\circ is measured above the horizontal. Therefore, the adjacent (horizontal) component along the xx-axis requires the cosine function (v0x=v0cos⁡30.0∘v_{0x} = v_0 \cos 30.0^\circ), while the opposite (vertical) component along the zz-axis requires the sine function (v0z=v0sin⁡30.0∘v_{0z} = v_0 \sin 30.0^\circ).

  2. Step 2

    v(0,d/w)=(30.0i^+15.0j^+52.0k^) m/sv_{(0, d/w)} = (30.0\hat{i} + 15.0\hat{j} + 52.0\hat{k})\text{ m/s}

    Correct

    v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}

    You correctly added the carrier's forward velocity (15.0j^ m/s15.0\hat{j}\text{ m/s}) to the drone's relative velocity vector, but the components reflect the earlier trigonometric swap.

  3. Step 3

    T=2v0zg  ⟹  T=2(51.96)9.80=10.6 sT = \frac{2v_{0z}}{g} \implies T = \frac{2(51.96)}{9.80} = 10.6\text{ s}

    Correct

    T=2v0zg=2(30.0)9.80≈6.12 sT = \frac{2v_{0z}}{g} = \frac{2(30.0)}{9.80} \approx 6.12\text{ s}

    You correctly identified and applied the time-of-flight formula for symmetric vertical projectile motion, but evaluated it using your inverted vertical velocity component (51.96 m/s51.96\text{ m/s} instead of 30.0 m/s30.0\text{ m/s}).

  4. Step 4

    r(d/w)=(30.0×10.6)i^+(15.0×10.6)j^  ⟹  r(d/w)=(318i^+159j^) mr_{(d/w)} = (30.0 \times 10.6)\hat{i} + (15.0 \times 10.6)\hat{j} \implies r_{(d/w)} = (318\hat{i} + 159\hat{j})\text{ m}

    Correct

    r⃗d/w=(51.96×6.122)i^+(15.0×6.122)j^≈318i^+91.8j^ m\vec{r}_{d/w} = (51.96 \times 6.122)\hat{i} + (15.0 \times 6.122)\hat{j} \approx 318\hat{i} + 91.8\hat{j}\text{ m}

    You correctly multiplied each constant horizontal velocity component by the time of flight to find total displacement, but the calculation propagated your incorrect velocity components and flight time.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Galilean velocity addition along each orthogonal axis.

You selected the correct kinematic formula for time of flight under uniform gravity.

You correctly recognized that horizontal motion relative to the ocean surface proceeds at constant velocity.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Inversion

You accidentally assigned sine to the horizontal axis and cosine to the vertical axis when resolving the launch velocity.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the adjacent and opposite legs when decomposing a vector relative to a horizontal reference angle.

REASONING PATH
Your ACEpath teacher’s suggested approach
Reference Angle Identification
  • For an angle θ\theta measured relative to the horizontal, the adjacent side lies in the horizontal plane and the opposite side lies along the vertical axis.

  • Sketch the right triangle with the launch angle at the base: label the horizontal side with cos⁡θ\cos\theta and the vertical side with sin⁡θ\sin\theta.

Physical Boundary Sanity Check
  • For small launch elevation angles (theta<45∘\\theta < 45^\circ), the projectile travels forward faster than it travels upward (vx>vzv_x > v_z).

  • Check whether your vertical speed is strictly less than your horizontal speed whenever θ=30∘\theta = 30^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Decompose the launch velocity using v0x,d/c=60.0cos⁡(30.0∘)=51.96 m/sv_{0x, d/c} = 60.0 \cos(30.0^\circ) = 51.96\text{ m/s} and v0z,d/c=60.0sin⁡(30.0∘)=30.0 m/sv_{0z, d/c} = 60.0 \sin(30.0^\circ) = 30.0\text{ m/s}.

  2. Add the ship's forward velocity (15.0j^ m/s15.0\hat{j}\text{ m/s}) to obtain v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}.

  3. Compute the flight time using the correct vertical velocity: T=2(30.0 m/s)9.80 m/s2≈6.12 sT = \frac{2(30.0\text{ m/s})}{9.80\text{ m/s}^2} \approx 6.12\text{ s}.

  4. Multiply horizontal velocity components by TT: x=51.96×6.122≈318 mx = 51.96 \times 6.122 \approx 318\text{ m} and y=15.0×6.122≈91.8 my = 15.0 \times 6.122 \approx 91.8\text{ m}.

Final answer

(a) v⃗0,d/w=52.0i^+15.0j^+30.0k^ m/s\vec{v}_{0, d/w} = 52.0\hat{i} + 15.0\hat{j} + 30.0\hat{k}\text{ m/s}; (b) T=6.12 sT = 6.12\text{ s}; (c) r⃗d/w=318i^+91.8j^ m\vec{r}_{d/w} = 318\hat{i} + 91.8\hat{j}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw and label the velocity triangle explicitly before writing algebraic equations.

  • Verify that angles given 'above the horizontal' assign cosine to the horizontal component.

  • Perform a magnitude check to ensure vx>vzv_x > v_z when θ<45∘\theta < 45^\circ.

Lock it in

Similar question

01

A flatbed railcar rolls due east along a straight track at a constant speed of 12.0 m/s12.0\text{ m/s}. A spring gun mounted on the car launches a steel ball with a speed of 20.0 m/s20.0\text{ m/s} relative to the car at an elevation angle of 53.1∘53.1^\circ above the horizontal, aimed directly backward (due west relative to the car). Find the initial velocity vector of the ball relative to the ground, defining i^\hat{i} as east and k^\hat{k} as vertically upward. (Use cos⁡53.1∘=0.60\cos 53.1^\circ = 0.60, sin⁡53.1∘=0.80\sin 53.1^\circ = 0.80.)

Answer

Relative to the railcar, v⃗b/c=−20.0(0.60)i^+20.0(0.80)k^=−12.0i^+16.0k^ m/s\vec{v}_{b/c} = -20.0(0.60)\hat{i} + 20.0(0.80)\hat{k} = -12.0\hat{i} + 16.0\hat{k}\text{ m/s}. Adding the railcar's velocity v⃗c/g=+12.0i^ m/s\vec{v}_{c/g} = +12.0\hat{i}\text{ m/s} yields v⃗b/g=(−12.0+12.0)i^+16.0k^=16.0k^ m/s\vec{v}_{b/g} = (-12.0 + 12.0)\hat{i} + 16.0\hat{k} = 16.0\hat{k}\text{ m/s} (purely vertical relative to the ground).

02

A motorboat travels due north at 8.00 m/s8.00\text{ m/s} across a calm lake. A flare is fired from the deck with an initial speed of 25.0 m/s25.0\text{ m/s} relative to the boat, oriented at an elevation of 36.9∘36.9^\circ above the horizontal and aimed directly toward the port side (due west relative to the boat). Taking g=9.80 m/s2g = 9.80\text{ m/s}^2 and assuming launch and splashdown heights are equal, determine: (a) the time of flight TT, and (b) the horizontal position vector of the splashdown point relative to the launch position on the water.

Answer

(a) Relative velocity components: v0x=−25.0cos⁡36.9∘=−20.0 m/sv_{0x} = -25.0\cos 36.9^\circ = -20.0\text{ m/s} (west), v0y=+8.00 m/sv_{0y} = +8.00\text{ m/s} (north), v0z=25.0sin⁡36.9∘=15.0 m/sv_{0z} = 25.0\sin 36.9^\circ = 15.0\text{ m/s}. Time of flight: T=2v0zg=2(15.0)9.80≈3.06 sT = \frac{2v_{0z}}{g} = \frac{2(15.0)}{9.80} \approx 3.06\text{ s}. (b) Horizontal displacement: r⃗=(v0xT)i^+(v0yT)j^=(−20.0×3.06)i^+(8.00×3.06)j^=−61.2i^+24.5j^ m\vec{r} = (v_{0x}T)\hat{i} + (v_{0y}T)\hat{j} = (-20.0 \times 3.06)\hat{i} + (8.00 \times 3.06)\hat{j} = -61.2\hat{i} + 24.5\hat{j}\text{ m} (61.2 m61.2\text{ m} west, 24.5 m24.5\text{ m} north).

03

An open-top military transport moves northeast at a constant velocity of 10.02 m/s10.0\sqrt{2}\text{ m/s} (10.0 m/s10.0\text{ m/s} east and 10.0 m/s10.0\text{ m/s} north) across level ground. A mortar on the vehicle fires a projectile at an angle of 45.0∘45.0^\circ above horizontal with a muzzle speed of 40.0 m/s40.0\text{ m/s} relative to the vehicle, aimed due east relative to the vehicle. Taking g=10.0 m/s2g = 10.0\text{ m/s}^2, calculate: (a) the initial velocity vector v⃗0\vec{v}_0 relative to the ground in i^,j^,k^\hat{i}, \hat{j}, \hat{k} notation, (b) the time of flight TT, and (c) the total ground distance from the launch point to impact.

Answer

(a) Muzzle velocity relative to vehicle: v0x′=40.0cos⁡45∘=20.02≈28.28 m/sv_{0x}' = 40.0\cos 45^\circ = 20.0\sqrt{2}\approx 28.28\text{ m/s}, v0y′=0v_{0y}' = 0, v0z′=20.02≈28.28 m/sv_{0z}' = 20.0\sqrt{2}\approx 28.28\text{ m/s}. Adding vehicle velocity (10.0i^+10.0j^)(10.0\hat{i} + 10.0\hat{j}): v⃗0=(28.28+10.0)i^+10.0j^+28.28k^=38.3i^+10.0j^+28.3k^ m/s\vec{v}_0 = (28.28 + 10.0)\hat{i} + 10.0\hat{j} + 28.28\hat{k} = 38.3\hat{i} + 10.0\hat{j} + 28.3\hat{k}\text{ m/s}. (b) T=2v0zg=2(28.28)10.0≈5.66 sT = \frac{2v_{0z}}{g} = \frac{2(28.28)}{10.0} \approx 5.66\text{ s}. (c) Displacements: x=(38.28)(5.66)≈216.7 mx = (38.28)(5.66) \approx 216.7\text{ m}, y=(10.0)(5.66)=56.6 my = (10.0)(5.66) = 56.6\text{ m}. Total ground distance: d=x2+y2=216.72+56.62≈224 md = \sqrt{x^2 + y^2} = \sqrt{216.7^2 + 56.6^2} \approx 224\text{ m}.

Loading workspace…