Resources

In a university nuclear engineering laboratory, students analyze a delayed-neutron detection experiment on an irradiated fuel sample to distinguish fission from fusion reaction signatures. A subcritical assembly containing natural and enriched uranium is pulsed with thermal neutrons. The detection array measures delayed neutron emission governed by precursor decay: 3587Br→3687Kr∗+e−+νˉe^{87}_{35}\text{Br} \rightarrow ^{87}_{36}\text{Kr}^* + e^- + \bar{\nu}_e, followed by instantaneous neutron emission 3687Kr∗→3686Kr+01n^{87}_{36}\text{Kr}^* \rightarrow ^{86}_{36}\text{Kr} + ^{1}_{0}\text{n}. The decay constant of bromine-87 is λ=0.0125 s−1\lambda = 0.0125\text{ s}^{-1}. (a) If the initial delayed neutron activity of the sample is A0=4.80×104 BqA_0 = 4.80 \times 10^4\text{ Bq}, calculate the activity remaining after t=120.0 st = 120.0\text{ s}. (b) Explain why the presence of delayed neutron precursor groups (t1/2t_{1/2} from milliseconds to minutes) is an exclusive operational characteristic of heavy-element fission that enables mechanical control of fission reactors, whereas D-T fusion devices exhibit zero delayed neutrons.

Answer and steps

Final answer

(a) A(120.0 s)=1.07×104 BqA(120.0\text{ s}) = 1.07 \times 10^4\text{ Bq}; (b) Fission yields neutron-rich fission fragments that beta-decay to excited states above neutron separation energies (delayed neutron precursors), giving reactor control rods seconds to respond. D-T fusion produces stable alpha particles (24He^{4}_{2}\text{He}) and prompt 14.1 MeV14.1\text{ MeV} neutrons with no radioactive precursor fragments that emit delayed neutrons.

Steps

Part (a): Calculation of Remaining Delayed Neutron Activity

  1. Governing Law of Radioactive Decay: The delayed neutron emission rate is governed by the rate-limiting β−\beta^- decay of the precursor nuclide (X3587X235287Br\ce{^{87}_{35}Br}). Because the subsequent neutron emission from the excited intermediate state (X3687X236287KrX∗\ce{^{87}_{36}Kr^*}) occurs virtually instantaneously (∼10−14 s\sim 10^{-14}\text{ s}), the detected activity A(t)A(t) follows standard exponential decay: A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}
  2. Substitution of Given Values:

    • Initial activity: A0=4.80×104 BqA_0 = 4.80 \times 10^4\text{ Bq}
    • Decay constant: λ=0.0125 s−1\lambda = 0.0125\text{ s}^{-1}
    • Elapsed time: t=120.0 st = 120.0\text{ s}

    Calculate the exponent: λt=(0.0125 s−1)(120.0 s)=1.50\lambda t = (0.0125\text{ s}^{-1})(120.0\text{ s}) = 1.50

  3. Evaluation: A(120.0 s)=(4.80×104 Bq)⋅e−1.50A(120.0\text{ s}) = (4.80 \times 10^4\text{ Bq}) \cdot e^{-1.50} e−1.50≈0.22313e^{-1.50} \approx 0.22313 A(120.0 s)≈(4.80×104)(0.22313)=1.071×104 Bq≈1.07×104 BqA(120.0\text{ s}) \approx (4.80 \times 10^4)(0.22313) = 1.071 \times 10^4\text{ Bq} \approx 1.07 \times 10^4\text{ Bq}

Part (b): Fission Delayed Neutrons vs. D-T Fusion Reaction Dynamics

  1. Mechanism of Delayed Neutrons in Fission:

    • In heavy-element fission (e.g., X235X22235U\ce{^{235}U} or X239X22239Pu\ce{^{239}Pu}), the splitting of a heavy nucleus creates medium-mass fission fragments that possess a high neutron-to-proton ratio (N/ZN/Z).
    • To achieve stability, these fragments undergo radioactive β−\beta^- decay. In certain precursors (such as X87X2287Br\ce{^{87}Br} or X137X22137I\ce{^{137}I}), the β−\beta^- decay populates an excited state in the daughter nucleus whose excitation energy exceeds the neutron separation energy (SnS_n).
    • Once populated, this state immediately de-excites by ejecting a neutron. While the neutron ejection itself is prompt, the overall emission rate is bottlenecked by the prior β−\beta^- decay half-life (t1/2t_{1/2} ranging from milliseconds to tens of seconds).
  2. Role in Reactor Control:

    • Most fission neutrons are prompt (emitted within ∼10−14 s\sim 10^{-14}\text{ s} of fission). If a reactor relied solely on prompt neutrons, any supercritical excursion would escalate on a millisecond timescale, far too rapid for mechanical safety systems to adjust.
    • The delayed neutron fraction (β≈0.65%\beta \approx 0.65\% for X235X22235U\ce{^{235}U}) lengthens the effective generation time to roughly 0.1 s0.1\text{ s}, providing sufficient time for physical control rods to move, regulate flux, and prevent runaway prompt-critical states.
  3. Absence of Delayed Neutrons in D-T Fusion:

    • The deuterium-tritium fusion reaction is: X12X2122H+X13X2123H→X24X2224He (3.5  MeV)+X01X2021n (14.1  MeV)\ce{^{2}_{1}H + ^{3}_{1}H -> ^{4}_{2}He (3.5\text{ MeV}) + ^{1}_{0}n (14.1\text{ MeV})}
    • The reaction products are stable alpha particles (X24X2224He\ce{^{4}_{2}He}) and energetic neutrons.
    • No radioactive intermediate fragments or β−\beta^--delayed precursor nuclei are formed. All fusion neutrons are released promptly (∼10−20 s\sim 10^{-20}\text{ s} timescale of the nuclear reaction), meaning delayed neutron emission is fundamentally zero in D-T fusion.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misuses the decay constant in place of the half-life in a base-2 decay formula, calculating A = A₀ × (1/2)^(λt).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A(t)=A0×(12)λtA(t) = A_0 \times \left(\frac{1}{2}\right)^{\lambda t}

    Correct

    A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}

    You used the decay constant λ\lambda as the exponent in a base-22 half-life formula. When using the decay constant λ\lambda, the radioactive decay law is an exponential in base ee: A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}. If you prefer base 22, the exponent must be t/t1/2t / t_{1/2}, where t1/2=ln⁡2λt_{1/2} = \frac{\ln 2}{\lambda}.

  2. Step 2

    λt=0.0125 s−1×120.0 s=1.50  ⟹  A(120.0)=4.80×104×(12)1.50=1.70×104 Bq\lambda t = 0.0125\text{ s}^{-1} \times 120.0\text{ s} = 1.50 \implies A(120.0) = 4.80 \times 10^4 \times \left(\frac{1}{2}\right)^{1.50} = 1.70 \times 10^4\text{ Bq}

    Correct

    λt=1.50  ⟹  A(120.0 s)=4.80×104 Bq×e−1.50≈1.07×104 Bq\lambda t = 1.50 \implies A(120.0\text{ s}) = 4.80 \times 10^4\text{ Bq} \times e^{-1.50} \approx 1.07 \times 10^4\text{ Bq}

    You calculated the product λt=1.50\lambda t = 1.50 correctly, but evaluating (12)1.50≈0.3536\left(\frac{1}{2}\right)^{1.50} \approx 0.3536 instead of e−1.50≈0.2231e^{-1.50} \approx 0.2231 propagated into an incorrect activity.

  3. Step 3

    Delayed neutron precursors undergo beta decay before emitting neutrons, increasing the effective generation time so mechanical rods can respond. D-T fusion directly produces prompt neutrons and alpha particles without forming neutron-rich beta-decaying fragments, so no delayed neutrons exist.

WHAT YOU DID WELL
Compliments from Your Teacher

You clearly articulated how beta decay of fission precursors acts as a rate-limiting bottleneck that lengthens the reactor generation time.

You correctly explained that D-T fusion yields prompt neutrons and stable alpha particles without intermediate neutron-rich precursors.

You accurately computed the dimensionless product λt=1.50\lambda t = 1.50.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Base Confusion in Exponential Decay

You substituted the decay constant directly into a base-1/2 power expression instead of taking the natural exponential e−λte^{-\lambda t}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the base-ee continuous decay law N(t)=N0e−λtN(t) = N_0 e^{-\lambda t} with the discrete half-life formula N(t)=N0(12)t/t1/2N(t) = N_0 \left(\frac{1}{2}\right)^{t / t_{1/2}}. Because (12)=e−ln⁡2\left(\frac{1}{2}\right) = e^{-\ln 2}, the base-2 exponent requires the number of half-lives t/t1/2=λtln⁡2t / t_{1/2} = \frac{\lambda t}{\ln 2}, not λt\lambda t alone.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the Base to the Parameter
  • Decay constant λ\lambda belongs with base ee: e−λte^{-\lambda t}. Half-life t1/2t_{1/2} belongs with base 12\frac{1}{2}: (12)t/t1/2\left(\frac{1}{2}\right)^{t/t_{1/2}}.

  • Whenever you see λ\lambda with units s−1\text{s}^{-1}, automatically write e−λte^{-\lambda t}, not (12)λt\left(\frac{1}{2}\right)^{\lambda t}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the standard decay law with natural base ee: A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}.

  2. Substitute the given product λt=(0.0125 s−1)(120.0 s)=1.50\lambda t = (0.0125\text{ s}^{-1})(120.0\text{ s}) = 1.50.

  3. Evaluate A(120.0 s)=(4.80×104 Bq)e−1.50≈(4.80×104)(0.22313)=1.07×104 BqA(120.0\text{ s}) = (4.80 \times 10^4\text{ Bq}) e^{-1.50} \approx (4.80 \times 10^4)(0.22313) = 1.07 \times 10^4\text{ Bq}.

Final answer

(a) A(120.0 s)=1.07×104 BqA(120.0\text{ s}) = 1.07 \times 10^4\text{ Bq}; (b) Fission yields neutron-rich fission fragments that beta-decay to excited states above neutron separation energies (delayed neutron precursors), giving reactor control rods seconds to respond. D-T fusion produces stable alpha particles (24He^{4}_{2}\text{He}) and prompt 14.1 MeV14.1\text{ MeV} neutrons with no radioactive precursor fragments that emit delayed neutrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the two equivalent forms of radioactive decay: N(t)=N0e−λt=N0(2)−t/t1/2N(t) = N_0 e^{-\lambda t} = N_0 (2)^{-t/t_{1/2}}.

  • Perform a sanity check on exponential factors: since e≈2.718>2e \approx 2.718 > 2, e−1.5≈0.223e^{-1.5} \approx 0.223 must be smaller than (0.5)1.5≈0.354(0.5)^{1.5} \approx 0.354.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the decay constant λ with the half-life t₁/₂, dividing time by λ instead of multiplying by λ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A(t)=A0e(−t/λ)  ⟹  t/λ=120.0/0.0125=9600A(t) = A_0 e^{(-t/\lambda)} \implies t/\lambda = 120.0 / 0.0125 = 9600

    Correct

    A(t)=A0e−λt  ⟹  λt=(0.0125 s−1)(120.0 s)=1.50A(t) = A_0 e^{-\lambda t} \implies \lambda t = (0.0125\text{ s}^{-1})(120.0\text{ s}) = 1.50

    You placed the decay constant λ\lambda in the denominator of the exponent. Because the decay constant λ\lambda already has units of inverse time (s−1\text{s}^{-1}), the dimensionless exponent is −λt-\lambda t, not −t/λ-t/\lambda.

  2. Step 2

    A(120.0)=4.80×104×e(−9600)≈0 BqA(120.0) = 4.80 \times 10^4 \times e^{(-9600)} \approx 0\text{ Bq}

    Correct

    A(120.0)=(4.80×104 Bq)⋅e−1.50≈1.07×104 BqA(120.0) = (4.80 \times 10^4\text{ Bq}) \cdot e^{-1.50} \approx 1.07 \times 10^4\text{ Bq}

    Evaluating e−9600e^{-9600} caused your remaining activity to drop incorrectly to zero due to the inverted exponent from Step 1.

  3. Step 3

    Fission fragments have excess neutrons and emit neutrons after beta decay, lengthening reactor response time enough for mechanical control rods. D-T fusion produces a single prompt neutron directly without precursor nuclei, resulting in zero delayed neutrons.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that fission fragments undergo beta decay before ejecting delayed neutrons.

You clearly explained how delayed neutrons increase the effective generation time to allow mechanical control rods to regulate fission reactors.

You correctly identified that D-T fusion produces only prompt neutrons with no radioactive precursor fragments.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted decay constant in exponential decay formula

You divided by λ\lambda instead of multiplying by λ\lambda in the exponential term.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the decay constant λ\lambda (which has units of s−1\text{s}^{-1}) with the mean lifetime τ=1/λ\tau = 1/\lambda (which has units of s\text{s}). In the form e−t/τe^{-t/\tau}, the denominator is time; when using the decay constant λ\lambda, the exponent is e−λte^{-\lambda t}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Exponent Dimensions
  • The exponent of any exponential function must be strictly dimensionless.

  • Multiply the units of the rate parameter by time. Since [λ]=s−1[\lambda] = \text{s}^{-1} and [t]=s[t] = \text{s}, verify that [λt]=s−1⋅s=1[\lambda t] = \text{s}^{-1} \cdot \text{s} = 1.

Distinguish $\lambda$, $\tau$, and $t_{1/2}$
  • λ\lambda is a transition probability per unit time (s−1s^{-1}), τ=1/λ\tau = 1/\lambda is mean lifetime (ss), and t1/2=ln⁡2λt_{1/2} = \frac{\ln 2}{\lambda} is half-life (ss).

  • Use e−λte^{-\lambda t} when given λ\lambda, e−t/τe^{-t/\tau} when given mean lifetime τ\tau, or 2−t/t1/22^{-t/t_{1/2}} when given half-life.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct dimensionless exponent: λt=(0.0125 s−1)(120.0 s)=1.50\lambda t = (0.0125\text{ s}^{-1})(120.0\text{ s}) = 1.50.

  2. Evaluate the exponential factor: e−1.50≈0.22313e^{-1.50} \approx 0.22313.

  3. Multiply by the initial activity: A(120.0 s)=(4.80×104 Bq)(0.22313)=1.071×104 Bq≈1.07×104 BqA(120.0\text{ s}) = (4.80 \times 10^4\text{ Bq})(0.22313) = 1.071 \times 10^4\text{ Bq} \approx 1.07 \times 10^4\text{ Bq}.

Final answer

(a) A(120.0 s)=1.07×104 BqA(120.0\text{ s}) = 1.07 \times 10^4\text{ Bq}; (b) Fission yields neutron-rich precursor fragments that beta-decay to neutron-emitting states, providing time for control rods to respond, whereas D-T fusion produces only prompt neutrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a quick dimensional analysis on decay exponents before evaluating: verify that units cancel completely to give a dimensionless number.

  • Memorize the parallel forms of exponential decay: N(t)=N0e−λt=N0e−t/τ=N0(12)t/t1/2N(t) = N_0 e^{-\lambda t} = N_0 e^{-t/\tau} = N_0 \left(\frac{1}{2}\right)^{t/t_{1/2}}.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly assumes fusion lacks delayed neutrons because fusion neutrons are absorbed rather than recognizing the absence of radioactive precursor fragments.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    A(t)=A0e−λt  ⟹  λt=0.0125×120.0=1.50  ⟹  A(120.0)=4.80×104×e−1.50=1.07×104 BqA(t) = A_0 e^{-\lambda t} \implies \lambda t = 0.0125 \times 120.0 = 1.50 \implies A(120.0) = 4.80 \times 10^4 \times e^{-1.50} = 1.07 \times 10^4\text{ Bq}

  2. Step 2

    Fission precursor decay introduces a delay of seconds to minutes, extending the average neutron lifetime so mechanical rods can stabilize the reaction.

  3. Step 3

    D-T fusion exhibits zero delayed neutrons because fusion neutrons are completely absorbed by the reactor blanket immediately after release.

    Correct

    D-T fusion exhibits zero delayed neutrons because the reaction X12X2122H+X13X2123H→X24X2224He+X01X2021n\ce{^2_1H + ^3_1H -> ^4_2He + ^1_0n} produces only stable X4X224He\ce{^4He} and prompt neutrons (14.1 MeV14.1\text{ MeV}); it produces no intermediate neutron-rich radioactive precursor fragments that can undergo subsequent delayed neutron emission.

    Delayed neutrons are delayed by the nuclear decay time of unstable precursor fragments, not by how fast released neutrons are absorbed. D-T fusion produces only stable alpha particles and prompt neutrons directly, leaving no radioactive precursor nuclei to emit delayed neutrons.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the radioactive decay law to calculate the precursor activity.

You clearly articulated how delayed neutron precursors extend the effective generation time to allow mechanical reactor regulation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Nuclear reaction mechanism misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated delayed neutrons as an issue of neutron transport and shielding absorption rather than a nuclear structure phenomenon requiring neutron-rich beta-decay precursor fragments.

REASONING PATH
Your ACEpath teacher’s suggested approach
Delayed Neutron Origin
  • Delayed neutrons arise exclusively from the β−\beta^- decay of neutron-rich fission fragments (precursors) populating daughter levels above the neutron separation energy.

  • Check whether the nuclear reaction produces radioactive precursor fragments (heavy fission) or only direct prompt products (D-T fusion).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the D-T reaction equation: X12X2122H+X13X2123H→X24X2224He (3.5  MeV)+X01X2021n (14.1  MeV)\ce{^2_1H + ^3_1H -> ^4_2He (3.5\text{ MeV}) + ^1_0n (14.1\text{ MeV})}.

  2. Identify the products: a stable alpha particle (X24X2224He\ce{^4_2He}) and a prompt free neutron.

  3. Contrast with fission: fission yields neutron-rich fragments (e.g., X87X2287Br\ce{^{87}Br}) that beta-decay to excited daughter nuclei that subsequently eject delayed neutrons. Fusion leaves no radioactive precursor nuclides, so delayed neutron emission is fundamentally zero.

Final answer

(a) A(120.0 s)=1.07×104 BqA(120.0\text{ s}) = 1.07 \times 10^4\text{ Bq}; (b) Fission yields neutron-rich precursor fragments whose β−\beta^- decay bottlenecks delayed neutron release, slowing reactor kinetics enough for mechanical control. D-T fusion produces only stable X4X224He\ce{^4He} and prompt neutrons with no radioactive precursor fragments, resulting in zero delayed neutrons.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between prompt neutron emission (timescale ∼10−14 s\sim 10^{-14}\text{ s}) and beta-delayed neutron emission (timescales of milliseconds to minutes).

  • Practice identifying whether reaction products include beta-unstable precursor isotopes with excitation energies above their neutron separation threshold (SnS_n).

Lock it in

Similar question

01

A radioactive delayed-neutron precursor has an initial activity of 6.00×103 Bq6.00 \times 10^3\text{ Bq} and a decay constant λ=0.0200 s−1\lambda = 0.0200\text{ s}^{-1}. Calculate the activity remaining after t=50.0 st = 50.0\text{ s}.

Answer

A(50.0 s)=2.21×103 BqA(50.0\text{ s}) = 2.21 \times 10^3\text{ Bq}. Compute λt=(0.0200 s−1)(50.0 s)=1.00\lambda t = (0.0200\text{ s}^{-1})(50.0\text{ s}) = 1.00, then evaluate A=A0e−λt=(6.00×103)e−1.00≈2.207×103 BqA = A_0 e^{-\lambda t} = (6.00 \times 10^3)e^{-1.00} \approx 2.207 \times 10^3\text{ Bq}.

02

A fission product emits delayed neutrons with a half-life of t1/2=22.0 st_{1/2} = 22.0\text{ s}. (a) Determine its decay constant λ\lambda. (b) Using the natural exponential formula A(t)=A0e−λtA(t) = A_0 e^{-\lambda t}, find the fraction of activity remaining at t=66.0 st = 66.0\text{ s}.

Answer

(a) λ=ln⁡2t1/2=0.6931522.0 s≈0.0315 s−1\lambda = \frac{\ln 2}{t_{1/2}} = \frac{0.69315}{22.0\text{ s}} \approx 0.0315\text{ s}^{-1}. (b) Remaining fraction is 0.1250.125 (or 1/81/8). Key steps: λt=(0.0315 s−1)(66.0 s)=2.079=3ln⁡2\lambda t = (0.0315\text{ s}^{-1})(66.0\text{ s}) = 2.079 = 3\ln 2; thus e−3ln⁡2=(eln⁡2)−3=2−3=1/8e^{-3\ln 2} = (e^{\ln 2})^{-3} = 2^{-3} = 1/8.

03

In a nuclear reactor, the prompt neutron generation time is Λ=1.0×10−4 s\Lambda = 1.0 \times 10^{-4}\text{ s}, but delayed neutrons with precursor half-life t1/2=12.5 st_{1/2} = 12.5\text{ s} make up a fraction β=0.0065\beta = 0.0065 of all fission neutrons. (a) Estimate the effective generation time ℓˉ≈(1−β)Λ+βτ\bar{\ell} \approx (1-\beta)\Lambda + \beta \tau, where τ=t1/2/ln⁡2\tau = t_{1/2}/\ln 2. (b) Contrast this with a hypothetical D-T fusion power plant experiencing an unexpected temperature excursion: why can a fusion plasma naturally shut down passively without control rods?

Answer

(a) ℓˉ≈0.117 s\bar{\ell} \approx 0.117\text{ s}. Precursor mean lifetime τ=12.5/0.69315≈18.03 s\tau = 12.5 / 0.69315 \approx 18.03\text{ s}. Then ℓˉ≈(0.9935)(1.0×10−4)+(0.0065)(18.03)≈0.117 s\bar{\ell} \approx (0.9935)(1.0 \times 10^{-4}) + (0.0065)(18.03) \approx 0.117\text{ s}, which is over 10001000 times longer than Λ\Lambda, allowing mechanical rod insertion. (b) D-T fusion requires precise plasma confinement and temperature; an excursion degrades confinement or radiation losses exceed heating, causing self-extinguishing fusion without prompt-critical runaway.

Loading workspace…