Resources

In a two-mesh circuit with nodes JJ and KK, the central branch contains a resistor Rc=4.00 ΩR_c = 4.00\ \Omega with a defined reference current IcI_c flowing downward from JJ to KK. The left branch contains a real battery with terminal labeling often prone to reversal: the negative terminal is connected to node JJ and the positive terminal is connected via R1=2.00 ΩR_1 = 2.00\ \Omega to node KK, with EMF E1=10.0 V\mathcal{E}_1 = 10.0\text{ V}. The right branch contains an ideal EMF E2=20.0 V\mathcal{E}_2 = 20.0\text{ V} whose positive terminal is connected to node JJ and negative terminal to node KK through resistor R2=8.00 ΩR_2 = 8.00\ \Omega. Using Kirchhoff's rules with strict adherence to passive sign conventions, determine the electric potential difference VJ−VKV_J - V_K between the nodes.

Answer and steps

Final answer

VJ−VK=−4.00 VV_J - V_K = -4.00\text{ V}

Steps

01

Identify Component Polarities and Node Connections

Let node KK serve as the reference potential (VK=0 VV_K = 0\text{ V}). We need to find VJ−VKV_J - V_K.

Pay close attention to the orientation of each EMF source:

  • Left branch: Connected between nodes JJ and KK.
    • The negative terminal of E1=10.0 V\mathcal{E}_1 = 10.0\text{ V} connects to node JJ.
    • The positive terminal of E1\mathcal{E}_1 connects to resistor R1=2.00 ΩR_1 = 2.00\ \Omega, which connects to node KK.
  • Right branch: Connected between nodes JJ and KK.
    • The positive terminal of E2=20.0 V\mathcal{E}_2 = 20.0\text{ V} connects to node JJ.
    • The negative terminal of E2\mathcal{E}_2 connects to resistor R2=8.00 ΩR_2 = 8.00\ \Omega, which connects to node KK.
  • Central branch: Contains resistor Rc=4.00 ΩR_c = 4.00\ \Omega with reference current IcI_c directed downward from JJ to KK.

02

Apply Kirchhoff's Voltage Law (KVL) to the Outer Loop

Consider the closed loop formed by the left and right branches (the outer perimeter of the circuit).

Define a circulating loop current II flowing counterclockwise around this outer loop:

  • Upward through the right branch (from KK toward JJ).
  • Downward through the left branch (from JJ toward KK).

Trace the potential changes around this loop starting at node KK and moving counterclockwise:

  1. Through the right branch (from KK to JJ):

    • Traversing R2R_2 in the direction of II gives a potential drop: −IR2-I R_2.
    • Traversing source E2\mathcal{E}_2 from its negative terminal to its positive terminal gives a potential rise: +E2+\mathcal{E}_2.
  2. Through the left branch (from JJ to KK):

    • Traversing source E1\mathcal{E}_1 from its negative terminal to its positive terminal gives a potential rise: +E1+\mathcal{E}_1.
    • Traversing R1R_1 in the direction of II gives a potential drop: −IR1-I R_1.

By Kirchhoff's loop rule, the algebraic sum of potential changes around the closed loop must be zero: (E2−IR2)+(E1−IR1)=0(\mathcal{E}_2 - I R_2) + (\mathcal{E}_1 - I R_1) = 0

Substitute the given numerical values: 20.0 V−I(8.00 Ω)+10.0 V−I(2.00 Ω)=020.0\text{ V} - I(8.00\ \Omega) + 10.0\text{ V} - I(2.00\ \Omega) = 0

30.0 V−(10.00 Ω)I=030.0\text{ V} - (10.00\ \Omega) I = 0

I=30.0 V10.00 Ω=3.00 AI = \frac{30.0\text{ V}}{10.00\ \Omega} = 3.00\text{ A}


03

Determine the Potential Difference VJ−VKV_J - V_K

The potential difference VJ−VKV_J - V_K can be determined by tracking the potential changes from node KK to node JJ along either branch.

Method A: Path via the Left Branch

Starting at node KK and moving toward node JJ:

  • Moving against the loop current II across resistor R1R_1 results in a potential increase: +IR1+I R_1.
  • Moving from the positive terminal to the negative terminal of battery E1\mathcal{E}_1 results in a potential decrease: −E1-\mathcal{E}_1.

VJ−VK=−E1+IR1V_J - V_K = -\mathcal{E}_1 + I R_1

Substitute the known values: VJ−VK=−10.0 V+(3.00 A)(2.00 Ω)=−10.0 V+6.00 V=−4.00 VV_J - V_K = -10.0\text{ V} + (3.00\text{ A})(2.00\ \Omega) = -10.0\text{ V} + 6.00\text{ V} = -4.00\text{ V}

Method B: Path via the Right Branch (Verification)

Starting at node KK and moving toward node JJ:

  • Moving with the loop current II across resistor R2R_2 results in a potential decrease: −IR2-I R_2.
  • Moving from the negative terminal to the positive terminal of source E2\mathcal{E}_2 results in a potential increase: +E2+\mathcal{E}_2.

VJ−VK=E2−IR2V_J - V_K = \mathcal{E}_2 - I R_2

Substitute the known values: VJ−VK=20.0 V−(3.00 A)(8.00 Ω)=20.0 V−24.0 V=−4.00 VV_J - V_K = 20.0\text{ V} - (3.00\text{ A})(8.00\ \Omega) = 20.0\text{ V} - 24.0\text{ V} = -4.00\text{ V}

Both paths yield the identical result: VJ−VK=−4.00 VV_J - V_K = -4.00\text{ V}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misinterprets the polarity of battery E_1 by assuming its positive terminal connects to node J, leading to an incorrect branch current expression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Let VK=0 VV_K = 0\text{ V}.   ⟹  \implies (VJ−10.0)2.00\frac{(V_J - 10.0)}{2.00} + VJ4.00\frac{V_J}{4.00} + (VJ−20.0)8.00\frac{(V_J - 20.0)}{8.00} = 0

    Correct

    VJ−(−10.0)2.00\frac{V_J - (-10.0)}{2.00} + VJ4.00\frac{V_J}{4.00} + VJ−20.08.00\frac{V_J - 20.0}{8.00} = 0

    You correctly chose node KK as reference (VK=0 VV_K = 0\text{ V}) and formulated Kirchhoff's Current Law at node JJ. However, because the negative terminal of E1\mathcal{E}_1 connects directly to node JJ, the potential at the positive terminal is VJ+10.0 VV_J + 10.0\text{ V}. The left branch current directed toward KK must therefore be written as VJ−(−10.0)2.00=VJ+10.02.00\frac{V_J - (-10.0)}{2.00} = \frac{V_J + 10.0}{2.00}, not VJ−10.02.00\frac{V_J - 10.0}{2.00}.

  2. Step 2

    4(V_J - 10.0) + 2V_J + (V_J - 20.0) = 0   ⟹  \implies 7V_J - 60.0 = 0

    Correct

    4(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0   ⟹  \implies 7V_J + 20.0 = 0

    You cleared the common denominator of 88 and grouped like terms accurately, but your resulting equation inherits the sign error from Step 1.

  3. Step 3

    V_J - V_K = \frac{60}{7}$$\text{ V} ≈\approx 8.57$\text{ V}$$

    Correct

    V_J - V_K = -\frac{20}{7}$$\text{ V} ≈\approx -2.86$\text{ V}$$

    You solved your linear equation correctly for VJV_J, but the numerical value is incorrect because of the earlier polarity reversal.

WHAT YOU DID WELL
Compliments from Your Teacher

You established a proper reference ground at node KK with VK=0 VV_K = 0\text{ V}.

You correctly applied Kirchhoff's Current Law by summing currents leaving node JJ to zero.

You correctly represented the central branch current VJ4.00\frac{V_J}{4.00} and the right branch current VJ−20.08.00\frac{V_J - 20.0}{8.00}.

You executed clean algebraic steps to clear denominators and isolate the unknown potential.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Battery Polarity Sign Error

You treated the left branch battery as having its positive terminal connected to node JJ, writing VJ−10.0V_J - 10.0 instead of VJ+10.0V_J + 10.0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing source polarity when writing node-voltage branch currents. When leaving a node AA through a battery toward ground, encountering the negative terminal first means the potential rises by E\mathcal{E} across the source, making the intermediate potential VA+EV_A + \mathcal{E} rather than VA−EV_A - \mathcal{E}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Battery Terminal Orientation
  • Trace the path from node AA toward the reference node. If you enter the negative terminal and exit the positive terminal, electric potential increases: Vafter=VA+EV_{\text{after}} = V_A + \mathcal{E}. If you enter the positive terminal and exit the negative terminal, electric potential decreases: Vafter=VA−EV_{\text{after}} = V_A - \mathcal{E}.

  • Always mark the long plate (++) and short plate (−-) explicitly on your circuit sketch before writing the branch current expression.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the nodal equation at node JJ using the correct potential rise +10.0 V+10.0\text{ V} across the left battery: VJ+10.0 V2.00 Ω+VJ4.00 Ω+VJ−20.0 V8.00 Ω=0\frac{V_J + 10.0\text{ V}}{2.00\ \Omega} + \frac{V_J}{4.00\ \Omega} + \frac{V_J - 20.0\text{ V}}{8.00\ \Omega} = 0.

  2. Multiply through by the least common denominator (8.00 Ω8.00\ \Omega): 4(VJ+10.0)+2VJ+(VJ−20.0)=04(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0.

  3. Expand and combine like terms: 4VJ+40.0+2VJ+VJ−20.0=7VJ+20.0=04V_J + 40.0 + 2V_J + V_J - 20.0 = 7V_J + 20.0 = 0.

  4. Solve for VJV_J: VJ=−20.07 V≈−2.86 VV_J = -\frac{20.0}{7}\text{ V} \approx -2.86\text{ V}.

Final answer

VJ−VK=−207 V≈−2.86 VV_J - V_K = -\frac{20}{7}\text{ V} \approx -2.86\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an arrow in the direction of current leaving the node, and label intermediate node voltages right after each ideal EMF source.

  • Practice writing nodal equations for branches containing inverted DC sources to make sign selection automatic.

  • Double-check your branch voltage drop (Vstart−Vend)(V_{\text{start}} - V_{\text{end}}) by walking along the physical branch from node to ground.

OverviewACEpath Teacher's Diagnosis

02 The student reverses the sign of battery E_2 when applying Kirchhoff's rule, treating the potential as rising rather than dropping across the right branch from J to K.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Let VK=0 VV_K = 0\text{ V}.

  2. Step 2

    VJ+10.02.00\frac{V_J + 10.0}{2.00} + VJ4.00\frac{V_J}{4.00} + VJ+20.08.00\frac{V_J + 20.0}{8.00} = 0

    Correct

    VJ+10.02.00\frac{V_J + 10.0}{2.00} + VJ4.00\frac{V_J}{4.00} + VJ−20.08.00\frac{V_J - 20.0}{8.00} = 0

    In the right branch, node JJ connects to the positive terminal of E2=20.0 V\mathcal{E}_2 = 20.0\text{ V}. Moving toward node KK passes from the positive terminal to the negative terminal, which produces a potential decrease of 20.0 V20.0\text{ V}. Therefore, the potential just before resistor R2R_2 is VJ−20.0 VV_J - 20.0\text{ V}, not VJ+20.0 VV_J + 20.0\text{ V}.

  3. Step 3

    4(V_J + 10.0) + 2V_J + (V_J + 20.0) = 0   ⟹  \implies 7V_J + 60.0 = 0

    Correct

    4(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0   ⟹  \implies 7V_J + 20.0 = 0

    Your fraction clearing and like-term combination were algebraically sound, but the equation inherits the sign error from Step 2.

  4. Step 4

    V_J - V_K = -\frac{60}{7}$$\text{ V} ≈\approx -8.57$\text{ V}$$

    Correct

    V_J - V_K = -\frac{20}{7}$$\text{ V} ≈\approx -2.86$\text{ V}$$

    Solving your simplified linear equation yields an incorrect final node voltage due to the earlier sign error on source E2\mathcal{E}_2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly defined node KK as the reference potential at 0 V0\text{ V}.

You correctly formulated the left branch current with the potential rise across E1\mathcal{E}_1.

You accurately combined terms and cleared the common denominator.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed EMF Polarity in Nodal Analysis

You wrote +20.0 V+20.0\text{ V} instead of −20.0 V-20.0\text{ V} for the right branch containing E2\mathcal{E}_2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing potential drops with potential rises when writing branch currents: traversing an EMF source from its positive terminal to its negative terminal lowers electric potential by E\mathcal{E}, meaning the potential immediately after the source is Vnode−EV_{\text{node}} - \mathcal{E}.

REASONING PATH
Your ACEpath teacher’s suggested approach
EMF Traversal Direction
  • Traversing from negative to positive terminal gives ΔV=+E\Delta V = +\mathcal{E}; traversing from positive to negative terminal gives ΔV=−E\Delta V = -\mathcal{E}.

  • Check which terminal is directly connected to the node before assigning the sign of the source voltage.

Branch Current Formulation
  • The current leaving node AA toward reference node 0 V0\text{ V} through a series source and resistor is I=VA±E−0RI = \frac{V_A \pm \mathcal{E} - 0}{R}.

  • Use −E-\mathcal{E} if exiting through the negative terminal toward the resistor, and +E+\mathcal{E} if exiting through the positive terminal.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply KCL at node JJ using the correct potential drop for E2\mathcal{E}_2: VJ+10.02.00+VJ4.00+VJ−20.08.00=0\frac{V_J + 10.0}{2.00} + \frac{V_J}{4.00} + \frac{V_J - 20.0}{8.00} = 0.

  2. Multiply the entire equation by the common denominator 8.008.00: 4(VJ+10.0)+2VJ+(VJ−20.0)=04(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0.

  3. Expand and combine like terms: 4VJ+40.0+2VJ+VJ−20.0=0  ⟹  7VJ+20.0=04V_J + 40.0 + 2V_J + V_J - 20.0 = 0 \implies 7V_J + 20.0 = 0.

  4. Solve for VJV_J: VJ=−20.07 V≈−2.86 VV_J = -\frac{20.0}{7}\text{ V} \approx -2.86\text{ V}.

Final answer

VJ−VK=−207 V≈−2.86 VV_J - V_K = -\frac{20}{7}\text{ V} \approx -2.86\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a path from a node traverses an EMF source from positive-to-negative (drop) or negative-to-positive (rise).

  • Write out the potential at intermediate nodes between batteries and resistors before assembling the full KCL equation.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to include the central branch current when summing currents at node J, effectively analyzing an open circuit across the central branch.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Let VK=0 V\text{Let } V_K = 0\text{ V}

  2. Step 2

    VJ+10.02.00+VJ−20.08.00=0\frac{V_J + 10.0}{2.00} + \frac{V_J - 20.0}{8.00} = 0

    Correct

    VJ+10.02.00+VJ4.00+VJ−20.08.00=0\frac{V_J + 10.0}{2.00} + \frac{V_J}{4.00} + \frac{V_J - 20.0}{8.00} = 0

    You set up nodal currents for the outer branches, but you omitted the central branch containing resistor Rc=4.00 ΩR_c = 4.00\ \Omega. In KCL, every branch physically connected to the node must be included in the algebraic sum.

  3. Step 3

    4(VJ+10.0)+(VJ−20.0)=0  ⟹  5VJ+20.0=04(V_J + 10.0) + (V_J - 20.0) = 0 \implies 5V_J + 20.0 = 0

    Correct

    4(VJ+10.0)+2VJ+(VJ−20.0)=0  ⟹  7VJ+20.0=04(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0 \implies 7V_J + 20.0 = 0

    Your algebra was performed correctly, but it operated on the equation that was missing the central branch term.

  4. Step 4

    VJ−VK=−4.00 VV_J - V_K = -4.00\text{ V}

    Correct

    VJ−VK=−207 V≈−2.86 VV_J - V_K = -\frac{20}{7}\text{ V} \approx -2.86\text{ V}

    Because the nodal equation was missing the central branch resistor, the resulting potential difference differs from the true value.

WHAT YOU DID WELL
Compliments from Your Teacher

You established a clear reference node at node KK.

You handled the polarity and signs of the two independent EMF sources correctly in the outer branches.

You performed the algebraic clearing of denominators and linear solving accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Branch in KCL

This is a conceptual omission rather than a calculation slip, as an entire circuit branch was excluded from the nodal balance.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated node JJ as connecting only the two outer loops, overlooking the central branch resistor Rc=4.00 ΩR_c = 4.00\ \Omega connected directly between node JJ and node KK.

REASONING PATH
Your ACEpath teacher’s suggested approach
Count Connected Branches at the Node
  • Kirchhoff's Current Law requires ∑Ileaving=0\sum I_{\text{leaving}} = 0 over every branch incident to that node.

  • Before writing the nodal equation, count all wires meeting at node JJ. If three branches meet, confirm that your equation contains exactly three current terms.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the central branch current Ic=VJ−VKRc=VJ4.00 ΩI_c = \frac{V_J - V_K}{R_c} = \frac{V_J}{4.00\ \Omega} in the nodal sum: VJ+10.02.00+VJ4.00+VJ−20.08.00=0\frac{V_J + 10.0}{2.00} + \frac{V_J}{4.00} + \frac{V_J - 20.0}{8.00} = 0.

  2. Multiply the entire equation by the common denominator 88: 4(VJ+10.0)+2VJ+(VJ−20.0)=04(V_J + 10.0) + 2V_J + (V_J - 20.0) = 0.

  3. Expand and collect like terms: (4+2+1)VJ+(40.0−20.0)=0  ⟹  7VJ+20.0=0(4 + 2 + 1)V_J + (40.0 - 20.0) = 0 \implies 7V_J + 20.0 = 0.

Final answer

VJ−VK=−207 V≈−2.86 VV_J - V_K = -\frac{20}{7}\text{ V} \approx -2.86\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying and circling all branches meeting at each principal node before writing KCL equations.

  • Verify circuit solutions using an alternative method, such as mesh current analysis or superposition, to ensure consistent branch currents.

Lock it in

Similar question

01

A single node AA is connected to ground (0 V0\text{ V}) through two parallel branches. Branch 1 contains a 12.0 V12.0\text{ V} battery with its negative terminal at node AA in series with a 3.00 Ω3.00\ \Omega resistor to ground. Branch 2 contains a simple 6.00 Ω6.00\ \Omega resistor to ground. Find the node potential VAV_A.

Answer

VA=−8.00 VV_A = -8.00\text{ V}. Key steps: Set sum of currents leaving node AA to zero: VA+12.03.00+VA6.00=0\frac{V_A + 12.0}{3.00} + \frac{V_A}{6.00} = 0. Multiply by 66: 2(VA+12.0)+VA=0  ⟹  3VA+24.0=0  ⟹  VA=−8.00 V2(V_A + 12.0) + V_A = 0 \implies 3V_A + 24.0 = 0 \implies V_A = -8.00\text{ V}.

02

A circuit node JJ has three branches connected to reference node KK (VK=0 VV_K = 0\text{ V}): Left branch: a 15.0 V15.0\text{ V} source with negative terminal at node JJ in series with R1=5.00 ΩR_1 = 5.00\ \Omega. Middle branch: a resistor R2=10.0 ΩR_2 = 10.0\ \Omega. Right branch: a 25.0 V25.0\text{ V} source with positive terminal at node JJ in series with R3=10.0 ΩR_3 = 10.0\ \Omega. Determine VJ−VKV_J - V_K.

Answer

VJ−VK=−1.25 VV_J - V_K = -1.25\text{ V}. Key steps: Formulate KCL at node JJ: VJ+15.05.00+VJ10.0+VJ−25.010.0=0\frac{V_J + 15.0}{5.00} + \frac{V_J}{10.0} + \frac{V_J - 25.0}{10.0} = 0. Multiply by 1010: 2(VJ+15.0)+VJ+(VJ−25.0)=0  ⟹  4VJ+5.0=0  ⟹  VJ=−1.25 V2(V_J + 15.0) + V_J + (V_J - 25.0) = 0 \implies 4V_J + 5.0 = 0 \implies V_J = -1.25\text{ V}.

03

A bridge branch connects node AA and node BB. Node AA has known potential VA=4.00 VV_A = 4.00\text{ V}. A branch going from AA to BB contains an ideal 9.00 V9.00\text{ V} battery whose positive terminal faces node AA and negative terminal connects via a 2.50 Ω2.50\ \Omega resistor to node BB. If a current of 2.00 A2.00\text{ A} flows from node AA to node BB, find the potential VBV_B.

Answer

VB=−10.0 VV_B = -10.0\text{ V}. Key steps: Trace electric potential from AA to BB: VB=VA−E−IR=4.00 V−9.00 V−(2.00 A)(2.50 Ω)=−5.00 V−5.00 V=−10.0 VV_B = V_A - \mathcal{E} - I R = 4.00\text{ V} - 9.00\text{ V} - (2.00\text{ A})(2.50\ \Omega) = -5.00\text{ V} - 5.00\text{ V} = -10.0\text{ V}.

Loading workspace…