Resources

A passenger of mass m=70.0 kgm = 70.0\text{ kg} stands on a calibrated electronic scale inside an elevator cab. Students frequently assume that an elevator moving downward must always yield a scale reading less than the passenger's true weight (mgmg). (a) Determine the apparent weight (normal force FNF_N) registered by the scale when the elevator is descending downward at v=5.00 m/sv = 5.00\text{ m/s} while decelerating at a rate of a=1.80 m/s2a = 1.80\text{ m/s}^2. (b) Determine the scale reading FNF_N when the elevator moves upward at the same speed of v=5.00 m/sv = 5.00\text{ m/s} while decelerating at a=1.80 m/s2a = 1.80\text{ m/s}^2. Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) FN=812 NF_N = 812\text{ N}; (b) FN=560 NF_N = 560\text{ N}

Steps

Elevator Moving Downward and Decelerating

Understanding Apparent Weight and Acceleration

The reading on a scale represents the normal force (FNF_N) exerted upward on the passenger by the scale surface. According to Newton's second law, the net vertical force determines the passenger's acceleration: ∑Fy=FN−mg=may\sum F_y = F_N - mg = m a_y Solving for the normal force gives: FN=m(g+ay)F_N = m(g + a_y) where upward is taken as the positive direction (+y+y).

Key Pitfall: The scale reading depends entirely on the direction of acceleration, not the direction of velocity. When an object is "decelerating" (slowing down), its acceleration points opposite to its velocity.


Step-by-Step Derivation

  1. Identify the direction of acceleration:

    • Velocity: v⃗\vec{v} is downward.
    • Motion: The elevator is slowing down (decelerating), so acceleration opposes velocity.
    • Therefore, the acceleration is directed upward: ay=+1.80 m/s2a_y = +1.80\text{ m/s}^2
  2. Calculate the normal force: FN=m(g+ay)F_N = m(g + a_y) FN=70.0 kg⋅(9.80 m/s2+1.80 m/s2)F_N = 70.0\text{ kg} \cdot (9.80\text{ m/s}^2 + 1.80\text{ m/s}^2) FN=70.0⋅11.60=812 NF_N = 70.0 \cdot 11.60 = 812\text{ N}

Even though the elevator is moving downward, the passenger feels heavier because the upward net force must slow the downward motion.


Elevator Moving Upward and Decelerating

  1. Identify the direction of acceleration:

    • Velocity: v⃗\vec{v} is upward.
    • Motion: The elevator is slowing down, so acceleration opposes velocity.
    • Therefore, the acceleration is directed downward: ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2
  2. Calculate the normal force: FN=m(g+ay)F_N = m(g + a_y) FN=70.0 kg⋅(9.80 m/s2−1.80 m/s2)F_N = 70.0\text{ kg} \cdot (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) FN=70.0⋅8.00=560 NF_N = 70.0 \cdot 8.00 = 560\text{ N}

Here, the downward acceleration results in a scale reading less than the passenger's true weight (mg=70.0⋅9.80=686 Nmg = 70.0 \cdot 9.80 = 686\text{ N}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student assumes that downward motion inherently reduces apparent weight, setting the acceleration direction as downward rather than upward for part (a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=mg−FN=ma  ⟹  FN=m(g−a)F_{\text{net}} = mg - F_N = ma \implies F_N = m(g - a) ⟹ FN=70.0×(9.80−1.80)  ⟹  FN=70.0×8.00=560 NF_N = 70.0 \times (9.80 - 1.80) \implies F_N = 70.0 \times 8.00 = 560\text{ N}

    Correct

    Fnet=FN−mg=ma  ⟹  FN=m(g+a)F_{\text{net}} = F_N - mg = ma \implies F_N = m(g + a) ⟹ FN=70.0×(9.80+1.80)=812 NF_N = 70.0 \times (9.80 + 1.80) = 812\text{ N}

    The elevator is moving downward and decelerating (slowing down), which means its acceleration points upward, opposite to the direction of motion. With upward acceleration, the scale must push upward with a force greater than gravity to slow the person down, so FN=m(g+a)=812 NF_N = m(g + a) = 812\text{ N}.

  2. Step 2

    Fnet=FN−mg=−ma  ⟹  FN=m(g−a)F_{\text{net}} = F_N - mg = -ma \implies F_N = m(g - a) ⟹ FN=70.0×(9.80−1.80)  ⟹  FN=560 NF_N = 70.0 \times (9.80 - 1.80) \implies F_N = 560\text{ N}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly set up Newton's second law relating normal force, weight, and net acceleration.

You solved part (b) accurately by accounting for the downward acceleration when moving upward and slowing down.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign / Direction Error

No, this is a conceptual confusion between the direction of velocity and the direction of acceleration during deceleration.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You associated the direction of motion (downward) with the direction of acceleration. When an object slows down, its acceleration always points in the direction opposite to its velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Determine Acceleration Direction from Deceleration
  • Deceleration means a⃗\vec{a} is anti-parallel to v⃗\vec{v} (points opposite to the velocity vector).

  • Check velocity first: if v⃗\vec{v} is downward and the object is slowing down, a⃗\vec{a} must point upward.

Relate Normal Force to Acceleration
  • Taking upward as positive: FN−mg=may  ⟹  FN=m(g+ay)F_N - mg = ma_y \implies F_N = m(g + a_y).

  • If acceleration is upward (ay>0a_y > 0), FN>mgF_N > mg; if acceleration is downward (ay<0a_y < 0), FN<mgF_N < mg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that downward motion with deceleration means acceleration is directed upward: ay=+1.80 m/s2a_y = +1.80\text{ m/s}^2.

  2. Apply Newton's second law along the vertical axis with upward as positive: ∑Fy=FN−mg=may\sum F_y = F_N - mg = ma_y.

  3. Rearrange for normal force: FN=m(g+ay)F_N = m(g + a_y).

  4. Substitute values: FN=70.0 kg×(9.80 m/s2+1.80 m/s2)=70.0×11.60=812 NF_N = 70.0\text{ kg} \times (9.80\text{ m/s}^2 + 1.80\text{ m/s}^2) = 70.0 \times 11.60 = 812\text{ N}.

Final answer

(a) FN=812 NF_N = 812\text{ N}; (b) FN=560 NF_N = 560\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw an arrow for velocity v⃗\vec{v} and a separate arrow for acceleration a⃗\vec{a} before setting up ∑F⃗=ma⃗\sum \vec{F} = m\vec{a}.

  • Remember the general rule for apparent weight: feeling heavier or lighter depends strictly on the direction of acceleration, never the direction of speed.

OverviewACEpath Teacher's Diagnosis

02 A student associates upward motion with increased normal force and downward motion with decreased normal force, incorrectly assigning an upward acceleration for part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Fnet=FN−mg=ma  ⟹  FN=m(g+a)=70.0×(9.80+1.80)  ⟹  FN=70.0×11.60=812 NF_{net} = F_N - mg = ma \implies F_N = m(g + a) = 70.0 \times (9.80 + 1.80) \implies F_N = 70.0 \times 11.60 = 812\text{ N}

  2. Step 2

    Fnet=FN−mg=ma  ⟹  FN=m(g+a)=70.0×(9.80+1.80)  ⟹  FN=70.0×11.60=812 NF_{net} = F_N - mg = ma \implies F_N = m(g + a) = 70.0 \times (9.80 + 1.80) \implies F_N = 70.0 \times 11.60 = 812\text{ N}

    Correct

    FN=m(g+ay)=70.0 kg×(9.80 m/s2−1.80 m/s2)=560 NF_N = m(g + a_y) = 70.0\text{ kg} \times (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 560\text{ N}

    When the elevator moves upward and decelerates, its acceleration points downward (ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2). The normal force must be less than the true weight, giving FN=560 NF_N = 560\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied Newton's second law to vertical motion.

You correctly deduced that descending while decelerating results in an upward acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in acceleration direction

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated deceleration as adding to gg regardless of the direction of motion, overlooking that slowing down while moving upward requires the acceleration to point downward opposite the velocity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Determine Acceleration Direction from Deceleration
  • Deceleration means the acceleration vector a⃗\vec{a} points opposite to the velocity vector v⃗\vec{v}.

  • Always sketch v⃗\vec{v} first; if the object is slowing down, point a⃗\vec{a} in the exact opposite direction before writing Newton's second law.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the velocity direction: v⃗\vec{v} is directed upward (+y+y).

  2. Apply the condition for deceleration: since the cab is slowing down, acceleration must oppose velocity, so a⃗\vec{a} points downward: ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2.

  3. Apply Newton's second law along the vertical axis: FN−mg=may  ⟹  FN=m(g+ay)F_N - mg = m a_y \implies F_N = m(g + a_y).

  4. Substitute the values: FN=70.0 kg×(9.80 m/s2−1.80 m/s2)=70.0×8.00 N=560 NF_N = 70.0\text{ kg} \times (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 70.0 \times 8.00\text{ N} = 560\text{ N}.

Final answer

(a) FN=812 NF_N = 812\text{ N}; (b) FN=560 NF_N = 560\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the vector definition of deceleration: a⃗\vec{a} opposes v⃗\vec{v} when speed decreases.

  • Practice drawing free-body diagrams alongside separate velocity and acceleration arrows before writing equations.

OverviewACEpath Teacher's Diagnosis

03 A student uses speed instead of acceleration in Newton's second law, adding or subtracting velocity from gravitational acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FN=m(g+v)  ⟹  FN=70.0×(9.80+5.00)  ⟹  FN=70.0×14.80=1036 NF_N = m(g + v) \implies F_N = 70.0 \times (9.80 + 5.00) \implies F_N = 70.0 \times 14.80 = 1036\text{ N}

    Correct

    FN−mg=may  ⟹  FN=m(g+ay)=70.0 kg×(9.80 m/s2+1.80 m/s2)=812 NF_N - mg = m a_y \implies F_N = m(g + a_y) = 70.0\text{ kg} \times (9.80\text{ m/s}^2 + 1.80\text{ m/s}^2) = 812\text{ N}

    You substituted the velocity v=5.00 m/sv = 5.00\text{ m/s} in place of acceleration aa. In Newton's second law, ∑F=ma\sum F = m a, so the apparent weight depends strictly on the elevator's acceleration, not its speed. When moving downward and slowing down (decelerating), the acceleration vector points upward (ay=+1.80 m/s2a_y = +1.80\text{ m/s}^2). Furthermore, adding gg (in m/s2\text{m/s}^2) to vv (in m/s\text{m/s}) mixes incompatible units.

  2. Step 2

    FN=m(g−v)  ⟹  FN=70.0×(9.80−5.00)  ⟹  FN=70.0×4.80=336 NF_N = m(g - v) \implies F_N = 70.0 \times (9.80 - 5.00) \implies F_N = 70.0 \times 4.80 = 336\text{ N}

    Correct

    FN−mg=may  ⟹  FN=m(g+ay)=70.0 kg×(9.80 m/s2−1.80 m/s2)=560 NF_N - mg = m a_y \implies F_N = m(g + a_y) = 70.0\text{ kg} \times (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 560\text{ N}

    You again substituted the elevator's speed v=5.00 m/sv = 5.00\text{ m/s} instead of the magnitude of its acceleration a=1.80 m/s2a = 1.80\text{ m/s}^2. For an elevator moving upward while decelerating, the acceleration is directed downward (ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2), yielding FN=70.0(9.80−1.80)=560 NF_N = 70.0(9.80 - 1.80) = 560\text{ N}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the scale reading equals the upward normal force FNF_N.

You applied the passenger's correct mass of m=70.0 kgm = 70.0\text{ kg} and standard gravity g=9.80 m/s2g = 9.80\text{ m/s}^2.

You carried out your arithmetic accurately based on your chosen formulas.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating velocity and acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused velocity (vv) with acceleration (aa) inside Newton's second law equation ∑F=ma\sum F = ma. This led you to add or subtract speed directly from gravitational acceleration, which is both physically incorrect and dimensionally invalid ([m/s2]≠[m/s][\text{m/s}^2] \neq [\text{m/s}]).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Homogeneity Check
  • Only physical quantities with identical dimensions and units can be added or subtracted.

  • Check that every term added inside (g±… )(g \pm \dots) has units of acceleration (m/s2\text{m/s}^2), never velocity (m/s\text{m/s}).

Kinematic Cause of Net Force
  • Scale reading (normal force) is determined exclusively by acceleration: FN=m(g+ay)F_N = m(g + a_y), regardless of the instantaneous velocity vv.

  • Identify whether the elevator is speeding up or slowing down to deduce the sign of aya_y before substituting numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the forces acting on the passenger: upward normal force FNF_N and downward gravity mgmg.

  2. Write Newton's second law along the vertical axis: ∑Fy=FN−mg=may\sum F_y = F_N - mg = m a_y, which gives FN=m(g+ay)F_N = m(g + a_y).

  3. For part (a), the cab moves downward and decelerates, meaning acceleration points upward: ay=+1.80 m/s2a_y = +1.80\text{ m/s}^2.

  4. Calculate part (a): FN=70.0 kg×(9.80 m/s2+1.80 m/s2)=812 NF_N = 70.0\text{ kg} \times (9.80\text{ m/s}^2 + 1.80\text{ m/s}^2) = 812\text{ N}.

  5. For part (b), the cab moves upward and decelerates, meaning acceleration points downward: ay=−1.80 m/s2a_y = -1.80\text{ m/s}^2.

  6. Calculate part (b): FN=70.0 kg×(9.80 m/s2−1.80 m/s2)=560 NF_N = 70.0\text{ kg} \times (9.80\text{ m/s}^2 - 1.80\text{ m/s}^2) = 560\text{ N}.

Final answer

(a) FN=812 NF_N = 812\text{ N}; (b) FN=560 NF_N = 560\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write Newton's second law in symbolic form (∑F=ma\sum F = ma) before inserting numerical values.

  • Perform a dimensional check on parentheses containing sums, ensuring you never combine m/s\text{m/s} with m/s2\text{m/s}^2.

  • Practice determining the direction of a⃗\vec{a} by asking: 'Does the acceleration vector oppose or match the velocity vector?'

Lock it in

Similar question

01

A 60.0 kg60.0\text{ kg} person stands on a scale in an elevator moving downward at 4.00 m/s4.00\text{ m/s} and coming to a stop with a constant deceleration of 2.20 m/s22.20\text{ m/s}^2. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the reading on the scale.

Answer

720 N720\text{ N}. Because the elevator is descending and slowing down, acceleration points upward (a=+2.20 m/s2a = +2.20\text{ m/s}^2). Applying Newton's second law gives FN=m(g+a)=60.0 kg×(9.80 m/s2+2.20 m/s2)=60.0×12.00=720 NF_N = m(g + a) = 60.0\text{ kg} \times (9.80\text{ m/s}^2 + 2.20\text{ m/s}^2) = 60.0 \times 12.00 = 720\text{ N}.

02

An elevator cab containing an 80.0 kg80.0\text{ kg} passenger moves upward at 6.00 m/s6.00\text{ m/s} and speeds up at a rate of 1.50 m/s21.50\text{ m/s}^2. Later, while still moving upward, it slows down at 1.50 m/s21.50\text{ m/s}^2. Calculate the scale reading FNF_N in each case (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

Case 1 (speeding up upward): a⃗\vec{a} is upward, so FN=m(g+a)=80.0×(9.80+1.50)=904 NF_N = m(g + a) = 80.0 \times (9.80 + 1.50) = 904\text{ N}. Case 2 (slowing down upward): a⃗\vec{a} is downward, so FN=m(g−a)=80.0×(9.80−1.50)=664 NF_N = m(g - a) = 80.0 \times (9.80 - 1.50) = 664\text{ N}.

03

A crate of mass M=25.0 kgM = 25.0\text{ kg} rests on the floor of a descending freight elevator. If the cable tension reduces such that the downward speed increases at 2.50 m/s22.50\text{ m/s}^2, what normal force does the floor exert on the crate? What if the cable brakes apply and the crate slows down at 2.50 m/s22.50\text{ m/s}^2? Use g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

When speeding up downward, acceleration points downward: FN=M(g−a)=25.0×(9.80−2.50)=182.5 N≈183 NF_N = M(g - a) = 25.0 \times (9.80 - 2.50) = 182.5\text{ N} \approx 183\text{ N}. When slowing down downward, acceleration points upward: FN=M(g+a)=25.0×(9.80+2.50)=307.5 N≈308 NF_N = M(g + a) = 25.0 \times (9.80 + 2.50) = 307.5\text{ N} \approx 308\text{ N}.

Loading workspace…