Resources
A circuit consists of a parallel-plate capacitor of capacitance connected to a battery until fully charged. The battery is then disconnected, leaving the capacitor isolated with fixed charge . Next, an external mechanical force pulls the plates apart, doubling their separation from to at a constant slow speed. (a) Calculate the initial electrostatic energy stored in the capacitor in microjoules (). (b) Calculate the final electrostatic energy stored in the capacitor after separation in microjoules (). (c) By applying the work-energy theorem to the electrostatic field, determine the external mechanical work done in separating the plates in microjoules ().
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Initial Stored Electrostatic Energy
A parallel-plate capacitor with capacitance charged to a potential difference stores electrostatic energy given by:
Substitute the given numerical values:
Part (b): Final Stored Electrostatic Energy
-
Capacitance dependence on plate separation: The capacitance of an ideal parallel-plate capacitor is:
Since the plate area remains constant while the separation doubles from to , the final capacitance becomes:
-
Charge conservation for an isolated capacitor: Because the battery is disconnected before moving the plates, the capacitor is electrically isolated. The charge on the plates remains constant:
-
Computing final energy: Expressing electrostatic potential energy in terms of the conserved charge and capacitance :
Substituting :
Evaluating numerically:
(Common Pitfall: Do not use with a constant voltage . When the battery is disconnected, voltage is not constant; it increases as the plates are separated according to .)
Part (c): External Mechanical Work
Since the plates are moved very slowly at a constant speed, the change in kinetic energy is zero (). By the work-energy theorem, the net external work done on the system equals the change in its electrostatic potential energy:
Substitute the values found in parts (a) and (b):
The positive sign confirms that mechanical work is done by the external agent against the attractive electrostatic force between the oppositely charged plates, increasing the energy stored in the electric field.
Typical errors
01 The student mistakenly assumes potential difference remains constant instead of charge after disconnecting the battery, concluding capacitance halving halves the stored energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The battery was disconnected before moving the plates, so the capacitor is isolated and its charge is conserved, not its potential difference. Because , the voltage actually doubles to , meaning the stored energy doubles rather than halves.
- Step 4Correct
Your work-energy relation is conceptually correct, but substituting the incorrect value of resulted in an incorrect negative value.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the initial stored electrostatic energy in part (a).
You correctly recognized that doubling plate separation reduces capacitance by half.
You correctly set up the work-energy theorem relating external work to the change in electrostatic potential energy.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the potential difference as constant after disconnecting the battery. When a capacitor is disconnected from its charging source, charge is trapped on the plates and cannot change, whereas the potential difference increases as capacitance decreases.
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Circuit Isolation
Battery connected implies ; battery disconnected implies .
Always verify whether the capacitor remains connected to a voltage source or is disconnected before altering its geometry.
- Select the Appropriate Energy Formula
Use when charge is constant, and when voltage is constant.
Express the energy using the conserved quantity to easily track whether energy increases or decreases.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify that charge is conserved because the battery was disconnected: .
Compute the final energy using the conserved charge: .
Apply the work-energy theorem with the corrected final energy: .
(a) ; (b) ; (c)
02 The student assumes capacitance is directly proportional to plate separation rather than inversely proportional, doubling the capacitance instead of halving it.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Capacitance is inversely proportional to plate separation, , not directly proportional. Doubling the separation distance cuts the capacitance in half.
- Step 3Correct
You correctly identified that the charge remains constant and appropriately used , but substituting instead of inverted the energy scaling.
- Step 4Correct
You correctly applied the work-energy theorem , but your numerical result inherited the incorrect from step 3.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly computed the initial electrostatic energy from and .
You recognized that charge remains constant after the battery is disconnected.
You correctly selected the energy formula for constant charge conditions.
You correctly applied the work-energy relation .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou wrote instead of the correct definition . Because you treated capacitance as directly proportional to plate separation, doubling the plate distance doubled your capacitance instead of halving it.
REASONING PATH
Your ACEpath teacher’s suggested approach- Capacitance of a Parallel-Plate Geometry
The capacitance of an ideal parallel-plate capacitor with plate area and separation is .
Always verify units and physical intuition: moving oppositely charged plates further apart decreases the charge stored per volt, meaning .
- Work Sign Check
Oppositely charged plates attract each other, so pulling them apart requires positive external work (), which increases the stored electric field energy ().
If pulling isolated plates apart yields a negative work or a decrease in stored energy, check whether your capacitance scaling was inverted.
CORRECTED PATH
ACEpath Teacher's Demonstration(a) ; (b) ; (c)
03 The student reverses the sign of the work-energy relation by setting external work equal to negative change in potential energy, yielding a negative work value.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You set external work to instead of . While the internal electric field does negative work (), an external agent pulling against the attractive electrostatic force does positive work () to increase the system's stored potential energy.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the initial stored energy using the battery voltage and initial capacitance.
You correctly identified that the charge remains constant after disconnecting the battery and that halving the capacitance doubles the stored energy.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou confused the sign convention between work done by an internal conservative field and work done by an external agent.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisThe definition applies specifically to the work done by the conservative force (the internal electrostatic field). By the work-energy theorem with zero change in kinetic energy, , which means .
REASONING PATH
Your ACEpath teacher’s suggested approach- Distinguish External Agent vs. Conservative Field
, whereas (at constant kinetic energy).
Ask yourself whether potential energy increased; if it increased, the external agent did positive work to add energy to the system.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the work-energy relation for an external agent moving charges at constant speed: .
Substitute the values calculated in parts (a) and (b): .
(a) ; (b) ; (c)
Lock it in
What physical quantity remains constant when an isolated capacitor's plate separation is changed after disconnecting the battery?
The electric charge remains constant because the plates are electrically isolated and charge has no conducting pathway to leave.
Similar question
A parallel-plate capacitor is charged to and then disconnected from the battery. The plate separation is then doubled. Find the new potential difference across the plates and the final stored electrostatic energy.
Answer
and . Key steps: ; since charge is fixed, ; .
A parallel-plate capacitor with capacitance is charged to . Compare the work required to double the plate separation under two different conditions: (1) with the battery remaining connected, and (2) after the battery is disconnected.
Answer
(or done on the battery) and . Key steps: . When connected, , , battery work is , so by external force against field. When isolated, is constant, , so .
An isolated parallel-plate capacitor has plate area , initial separation , and carries equal and opposite charges of magnitude . (a) Calculate the magnitude of the uniform electric field between the plates. (b) Calculate the attractive force between the plates. (c) Show that integrating this force over a displacement from to yields the exact increase in electrostatic energy .
Answer
(a) ; (b) ; (c) . Key steps: . The force on one plate from the other is . Since is independent of separation , external work is . Also , verifying that exactly.