Resources

An interstellar probe travels past Earth at a constant relativistic speed of v=0.800cv = 0.800c, where cc is the speed of light in vacuum. Observers on Earth measure the duration of a scientific transmission emitted by the probe to be Δt=25.0 s\Delta t = 25.0\text{ s}. Determine the proper time interval Δt0\Delta t_0 of the transmission as measured by the onboard clock of the probe.

Answer and steps

Final answer

Δt0=15.0 s\Delta t_0 = 15.0\text{ s}

Steps

01

Identify Proper Time and Dilated Time

In special relativity, the proper time interval Δt0\Delta t_0 is defined as the time interval between two events measured by an observer (or clock) in whose reference frame both events occur at the same spatial location.

  • The transmission begins and ends at the probe itself. Therefore, a clock aboard the probe measures the proper time Δt0\Delta t_0.
  • Observers on Earth measure the probe moving past them, so they observe the transmission between two different locations in their own frame. They measure a dilated time interval Δt=25.0 s\Delta t = 25.0\text{ s}.
02

Apply the Time Dilation Formula

The relationship between the dilated time Δt\Delta t and the proper time Δt0\Delta t_0 is given by: Δt=γΔt0=Δt01−v2c2\Delta t = \gamma \Delta t_0 = \frac{\Delta t_0}{\sqrt{1 - \frac{v^2}{c^2}}}

Rearranging to solve for the proper time Δt0\Delta t_0: Δt0=Δt1−v2c2\Delta t_0 = \Delta t \sqrt{1 - \frac{v^2}{c^2}}

03

Calculate the Lorentz Factor Term

Substitute the relative velocity v=0.800cv = 0.800c: 1−v2c2=1−(0.800)2=1−0.640=0.360=0.600\sqrt{1 - \frac{v^2}{c^2}} = \sqrt{1 - (0.800)^2} = \sqrt{1 - 0.640} = \sqrt{0.360} = 0.600

04

Compute the Proper Time Interval

Substitute the Earth-frame duration Δt=25.0 s\Delta t = 25.0\text{ s} into the expression: Δt0=(25.0 s)(0.600)=15.0 s\Delta t_0 = (25.0\text{ s})(0.600) = 15.0\text{ s}

Common Pitfall: A common error is multiplying the observed time by γ\gamma instead of dividing by γ\gamma. Remember that "moving clocks run slow"—the proper time Δt0\Delta t_0 measured in the object's rest frame is always shorter than the dilated time Δt\Delta t measured by an observer in relative motion (Δt>Δt0\Delta t > \Delta t_0 for v>0v > 0).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the dilated time measured on Earth with the proper time, incorrectly multiplying by the Lorentz factor γ instead of dividing by it.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    γ=11−(0.800c/c)2=10.360=10.600=1.667\gamma = \frac{1}{\sqrt{1 - (0.800c/c)^2}} = \frac{1}{\sqrt{0.360}} = \frac{1}{0.600} = 1.667

  2. Step 2

    Δt0=γΔt\Delta t_0 = \gamma \Delta t

    Correct

    Δt=γΔt0  ⟹  Δt0=Δtγ\Delta t = \gamma \Delta t_0 \implies \Delta t_0 = \frac{\Delta t}{\gamma}

    You inverted the time dilation formula. The time interval measured in a frame where the source moves is always dilated (longer), so Δt=γΔt0\Delta t = \gamma \Delta t_0, which means Δt0=Δtγ\Delta t_0 = \frac{\Delta t}{\gamma}.

  3. Step 3

    Δt0=1.667×25.0 s=41.7 s\Delta t_0 = 1.667 \times 25.0\text{ s} = 41.7\text{ s}

    Correct

    Δt0=25.0 s1.667=(25.0 s)(0.600)=15.0 s\Delta t_0 = \frac{25.0\text{ s}}{1.667} = (25.0\text{ s})(0.600) = 15.0\text{ s}

    You substituted correctly into your formula from Step 2, but because the formula was inverted, your final result was larger than the Earth-frame duration instead of smaller.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the numerical value of the Lorentz factor γ=1.667\gamma = 1.667 from the given relative speed.

You clearly identified the given observed time interval and maintained correct unit tracking throughout your work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Time Dilation Relation

You set Δt0=γΔt\Delta t_0 = \gamma \Delta t instead of Δt=γΔt0\Delta t = \gamma \Delta t_0.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused proper time with dilated time, forgetting that proper time is measured by a clock at rest relative to the events and is always the shortest possible measured time interval between those two events.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying Proper Time
  • Proper time Δt0\Delta t_0 is measured in the reference frame where the two events occur at the exact same spatial location.

  • Find which observer stays with the event from start to finish; that clock measures Δt0\Delta t_0.

Sanity Check with 'Moving Clocks Run Slow'
  • Since γ>1\gamma > 1 for any non-zero speed, dilated time is always longer than proper time: Δt>Δt0\Delta t > \Delta t_0.

  • Always verify that your calculated proper time Δt0\Delta t_0 is smaller than the dilated time Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the time dilation formula relating dilated time Δt\Delta t and proper time Δt0\Delta t_0: Δt=γΔt0\Delta t = \gamma \Delta t_0.

  2. Rearrange the formula to solve for the proper time interval: Δt0=Δtγ=Δt1−v2c2\Delta t_0 = \frac{\Delta t}{\gamma} = \Delta t \sqrt{1 - \frac{v^2}{c^2}}.

  3. Substitute Δt=25.0 s\Delta t = 25.0\text{ s} and 1−v2c2=0.600\sqrt{1 - \frac{v^2}{c^2}} = 0.600: Δt0=(25.0 s)(0.600)=15.0 s\Delta t_0 = (25.0\text{ s})(0.600) = 15.0\text{ s}.

Final answer

Δt0=15.0 s\Delta t_0 = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying which observer measures proper time Δt0\Delta t_0 by checking which clock stays at the location of both the start and end events.

  • Perform a quick order-of-magnitude check after every relativistic time problem to confirm that Δt0<Δt\Delta t_0 < \Delta t.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the velocity ratio in the Lorentz factor formula, using 1 - v/c instead of 1 - v²/c².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δt0=Δt×1−vc\Delta t_0 = \Delta t \times \sqrt{1 - \frac{v}{c}}

    Correct

    Δt0=Δt×1−v2c2\Delta t_0 = \Delta t \times \sqrt{1 - \frac{v^2}{c^2}}

    The Lorentz factor term involves the square of the velocity ratio, v2c2\frac{v^2}{c^2}, rather than the first power vc\frac{v}{c}.

  2. Step 2

    Δt0=25.0 s×1−0.800  ⟹  Δt0=25.0 s×0.200  ⟹  Δt0=25.0 s×0.447=11.2 s\Delta t_0 = 25.0\text{ s} \times \sqrt{1 - 0.800} \implies \Delta t_0 = 25.0\text{ s} \times \sqrt{0.200} \implies \Delta t_0 = 25.0\text{ s} \times 0.447 = 11.2\text{ s}

    Correct

    Δt0=25.0 s×1−(0.800)2  ⟹  Δt0=25.0 s×0.600=15.0 s\Delta t_0 = 25.0\text{ s} \times \sqrt{1 - (0.800)^2} \implies \Delta t_0 = 25.0\text{ s} \times 0.600 = 15.0\text{ s}

    Your arithmetic and square root calculation were carried out consistently, but the values were affected by the missing square in the initial formula.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the onboard clock of the probe measures the proper time interval Δt0\Delta t_0.

You set up the relationship so that proper time Δt0\Delta t_0 is shorter than dilated time Δt\Delta t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of velocity squaring in Lorentz factor

No, this stems from a conceptual formula recall error rather than a brief transcription slip.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the relativistic contraction factor 1−β2\sqrt{1 - \beta^2} as 1−β\sqrt{1 - \beta}, omitting the exponent 22 on the velocity ratio β=vc\beta = \frac{v}{c}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Square the Velocity Ratio
  • In all standard relativistic factor calculations, γ=11−β2\gamma = \frac{1}{\sqrt{1 - \beta^2}} where β=vc\beta = \frac{v}{c}.

  • Always compute (vc)2\left(\frac{v}{c}\right)^2 before subtracting from 11.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct time dilation relation: Δt=γΔt0=Δt01−v2c2\Delta t = \gamma \Delta t_0 = \frac{\Delta t_0}{\sqrt{1 - \frac{v^2}{c^2}}}.

  2. Rearrange for proper time: Δt0=Δt1−(vc)2\Delta t_0 = \Delta t \sqrt{1 - \left(\frac{v}{c}\right)^2}.

  3. Substitute v=0.800cv = 0.800c: 1−(0.800)2=1−0.640=0.360=0.600\sqrt{1 - (0.800)^2} = \sqrt{1 - 0.640} = \sqrt{0.360} = 0.600.

  4. Calculate the proper time interval: Δt0=25.0 s×0.600=15.0 s\Delta t_0 = 25.0\text{ s} \times 0.600 = 15.0\text{ s}.

Final answer

Δt0=15.0 s\Delta t_0 = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the Lorentz factor from the light-clock thought experiment to see why the Pythagorean theorem produces (ct)2=(ct0)2+(vt)2(ct)^2 = (ct_0)^2 + (vt)^2, giving v2/c2v^2/c^2.

  • Practice calculating 1−(v/c)2\sqrt{1 - (v/c)^2} for standard relativistic speeds (0.6c0.6c, 0.8c0.8c, 0.9c0.9c) to build automatic recall.

OverviewACEpath Teacher's Diagnosis

03 The student omits the square root in the relativistic factor, calculating the time interval using 1 - v²/c² directly.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δt0=Δt×(1−v2c2)\Delta t_0 = \Delta t \times \left(1 - \frac{v^2}{c^2}\right)

    Correct

    Δt0=Δt1−v2c2\Delta t_0 = \Delta t \sqrt{1 - \frac{v^2}{c^2}}

    The Lorentz factor definition is γ=11−v2c2\gamma = \frac{1}{\sqrt{1 - \frac{v^2}{c^2}}}, so proper time relates to dilated time by Δt0=Δtγ=Δt1−v2c2\Delta t_0 = \frac{\Delta t}{\gamma} = \Delta t\sqrt{1 - \frac{v^2}{c^2}}. You omitted the square root over the velocity term.

  2. Step 2

    1−(0.800)2=1−0.640=0.3601 - (0.800)^2 = 1 - 0.640 = 0.360

    Correct

    1−(0.800)2=1−0.640=0.360=0.600\sqrt{1 - (0.800)^2} = \sqrt{1 - 0.640} = \sqrt{0.360} = 0.600

    Your arithmetic for 1−(0.800)21 - (0.800)^2 was accurate, but because the formula was missing the radical, you did not take the square root of 0.3600.360.

  3. Step 3

    Δt0=25.0 s×0.360=9.00 s\Delta t_0 = 25.0\text{ s} \times 0.360 = 9.00\text{ s}

    Correct

    Δt0=25.0 s×0.600=15.0 s\Delta t_0 = 25.0\text{ s} \times 0.600 = 15.0\text{ s}

    Multiplying by the unrooted factor 0.3600.360 instead of 0.6000.600 propagated the initial error into the final answer.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the clock aboard the probe measures proper time Δt0\Delta t_0.

You correctly related proper time and dilated time such that proper time is smaller than dilated time.

You accurately computed the numerical value of 1−(0.800)2=0.3601 - (0.800)^2 = 0.360.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in Lorentz factor

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You recalled the relativistic factor without its radical sign, substituting (1−v2c2)\left(1 - \frac{v^2}{c^2}\right) in place of 1−v2c2=1γ\sqrt{1 - \frac{v^2}{c^2}} = \frac{1}{\gamma}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall the complete Lorentz factor
  • The Lorentz factor is defined with a square root: γ=11−v2/c2\gamma = \frac{1}{\sqrt{1 - v^2/c^2}}, and the reciprocal is 1γ=1−v2/c2\frac{1}{\gamma} = \sqrt{1 - v^2/c^2}.

  • Always write down the radical symbol …\sqrt{\dots} explicitly when setting up time dilation or length contraction equations.

Check Pythagorean 3-4-5 triplets in relativity
  • Speeds of v=0.6cv = 0.6c and v=0.8cv = 0.8c form classic 3-4-5 right triangles: 1−(0.8)2=0.6\sqrt{1 - (0.8)^2} = 0.6 and 1−(0.6)2=0.8\sqrt{1 - (0.6)^2} = 0.8.

  • Use these common values as a sanity check: when v=0.800cv = 0.800c, the conversion factor 1γ\frac{1}{\gamma} must equal 0.6000.600, never 0.3600.360.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the correct time dilation relationship: Δt0=Δt1−v2c2\Delta t_0 = \Delta t \sqrt{1 - \frac{v^2}{c^2}}.

  2. Substitute v=0.800cv = 0.800c: 1−(0.800)2=1−0.640=0.360=0.600\sqrt{1 - (0.800)^2} = \sqrt{1 - 0.640} = \sqrt{0.360} = 0.600.

  3. Multiply by the Earth-frame duration: Δt0=(25.0 s)(0.600)=15.0 s\Delta t_0 = (25.0\text{ s})(0.600) = 15.0\text{ s}.

Final answer

Δt0=15.0 s\Delta t_0 = 15.0\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review flashcards highlighting the difference between (1−v2c2)\left(1 - \frac{v^2}{c^2}\right) and 1−v2c2\sqrt{1 - \frac{v^2}{c^2}}.

  • Practice calculating γ\gamma and 1γ\frac{1}{\gamma} across various common speeds (0.6c0.6c, 0.8c0.8c, 0.96c0.96c).

  • Complete the follow-up exercises to solidify the square root application in relativistic kinematics.

Lock it in

Similar question

01

A particle moves through a laboratory detector at speed v=0.600cv = 0.600c. Observers in the laboratory measure its lifetime to be Δt=2.0×10−8 s\Delta t = 2.0 \times 10^{-8}\text{ s}. What is the particle's proper lifetime Δt0\Delta t_0 in its own rest frame?

Answer

Δt0=1.6×10−8 s\Delta t_0 = 1.6 \times 10^{-8}\text{ s}. Key steps: Calculate γ=11−0.6002=1.25\gamma = \frac{1}{\sqrt{1 - 0.600^2}} = 1.25. Then, Δt0=Δtγ=2.0×10−8 s1.25=1.6×10−8 s\Delta t_0 = \frac{\Delta t}{\gamma} = \frac{2.0 \times 10^{-8}\text{ s}}{1.25} = 1.6 \times 10^{-8}\text{ s}.

02

An astronaut on a high-speed craft takes an exam that craft clocks record as lasting exactly Δt0=60.0 min\Delta t_0 = 60.0\text{ min}. Mission Control on Earth monitors the exam and records a duration of Δt=100.0 min\Delta t = 100.0\text{ min}. What is the speed vv of the spacecraft relative to Earth, expressed as a fraction of cc?

Answer

v=0.800cv = 0.800c. Key steps: Use γ=ΔtΔt0=100.0 min60.0 min=53\gamma = \frac{\Delta t}{\Delta t_0} = \frac{100.0\text{ min}}{60.0\text{ min}} = \frac{5}{3}. Then solve 1−(v/c)2=35=0.600\sqrt{1 - (v/c)^2} = \frac{3}{5} = 0.600, yielding 1−(v/c)2=0.3601 - (v/c)^2 = 0.360, so v/c=0.800v/c = 0.800.

03

A relativistic train passes a platform at speed vv. A passenger on the train turns on a reading lamp for a duration of Δt0=12.0 s\Delta t_0 = 12.0\text{ s} according to their wristwatch. An observer standing on the platform measures this same period of illumination to be Δt=20.0 s\Delta t = 20.0\text{ s}. If the platform observer now measures the length of the train to be 180 m180\text{ m}, what is the proper length L0L_0 of the train?

Answer

L0=300 mL_0 = 300\text{ m}. Key steps: Find γ=ΔtΔt0=20.0 s12.0 s=53\gamma = \frac{\Delta t}{\Delta t_0} = \frac{20.0\text{ s}}{12.0\text{ s}} = \frac{5}{3}. Length contraction gives L=L0γL = \frac{L_0}{\gamma}, so the proper length is L0=γL=(53)(180 m)=300 mL_0 = \gamma L = \left(\frac{5}{3}\right)(180\text{ m}) = 300\text{ m}.

Loading workspace…