Resources

A light rigid rod of length L=1.20 mL = 1.20\text{ m} and negligible mass has two small lead spheres attached to it: sphere A of mass mA=0.500 kgm_A = 0.500\text{ kg} is mounted at one end (x=0x = 0), and sphere B of mass mB=1.50 kgm_B = 1.50\text{ kg} is mounted at the opposite end (x=1.20 mx = 1.20\text{ m}). Treating the spheres as point masses, calculate the moment of inertia II of this system about an axis perpendicular to the rod passing through: (a) the center of mass of the system, and (b) an axis perpendicular to the rod passing through the end containing sphere A.

Answer and steps

Final answer

(a) Icm=0.540 kg⋅m2I_{\text{cm}} = 0.540\text{ kg}\cdot\text{m}^2; (b) IA=2.16 kg⋅m2I_A = 2.16\text{ kg}\cdot\text{m}^2

Steps

General Principle of Moment of Inertia for Point Masses

The moment of inertia II of a system of discrete point masses about a specified axis of rotation is defined as: I=∑imiri2I = \sum_{i} m_i r_i^2 where mim_i is the mass of the ii-th particle and rir_i is the perpendicular distance from the particle to the rotation axis. Because the rod has negligible mass, only the lead spheres contribute to the moment of inertia.


Part (a): Axis Through the Center of Mass

  1. Locate the center of mass (xcmx_{\text{cm}}):
    Using sphere A at the origin (xA=0x_A = 0) and sphere B at xB=1.20 mx_B = 1.20\text{ m}: xcm=mAxA+mBxBmA+mB=(0.500 kg)(0 m)+(1.50 kg)(1.20 m)0.500 kg+1.50 kg=1.80 kg⋅m2.00 kg=0.900 mx_{\text{cm}} = \frac{m_A x_A + m_B x_B}{m_A + m_B} = \frac{(0.500\text{ kg})(0\text{ m}) + (1.50\text{ kg})(1.20\text{ m})}{0.500\text{ kg} + 1.50\text{ kg}} = \frac{1.80\text{ kg}\cdot\text{m}}{2.00\text{ kg}} = 0.900\text{ m}
  2. Determine the distance of each mass from the center of mass:

    • Distance to sphere A:
      rA=∣xA−xcm∣=∣0−0.900 m∣=0.900 mr_A = |x_A - x_{\text{cm}}| = |0 - 0.900\text{ m}| = 0.900\text{ m}
    • Distance to sphere B:
      rB=∣xB−xcm∣=∣1.20 m−0.900 m∣=0.300 mr_B = |x_B - x_{\text{cm}}| = |1.20\text{ m} - 0.900\text{ m}| = 0.300\text{ m}
  3. Calculate IcmI_{\text{cm}}:
    Icm=mArA2+mBrB2I_{\text{cm}} = m_A r_A^2 + m_B r_B^2 Icm=(0.500 kg)(0.900 m)2+(1.50 kg)(0.300 m)2I_{\text{cm}} = (0.500\text{ kg})(0.900\text{ m})^2 + (1.50\text{ kg})(0.300\text{ m})^2 Icm=(0.500)(0.810)+(1.50)(0.090)=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = (0.500)(0.810) + (1.50)(0.090) = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2

Part (b): Axis Through the End Containing Sphere A

  1. Determine the distance of each mass from this axis (x=0x = 0):

    • Distance to sphere A: rA=0 mr_A = 0\text{ m} (since sphere A lies directly on the axis)
    • Distance to sphere B: rB=L=1.20 mr_B = L = 1.20\text{ m}
  2. Calculate IAI_A directly:
    IA=mArA2+mBrB2I_A = m_A r_A^2 + m_B r_B^2 IA=(0.500 kg)(0 m)2+(1.50 kg)(1.20 m)2I_A = (0.500\text{ kg})(0\text{ m})^2 + (1.50\text{ kg})(1.20\text{ m})^2 IA=0+(1.50 kg)(1.44 m2)=2.16 kg⋅m2I_A = 0 + (1.50\text{ kg})(1.44\text{ m}^2) = 2.16\text{ kg}\cdot\text{m}^2

(Alternative Check): Using the parallel-axis theorem, I=Icm+Md2I = I_{\text{cm}} + M d^2, where the total mass is M=2.00 kgM = 2.00\text{ kg} and the distance between the two parallel axes is d=0.900 md = 0.900\text{ m}: IA=0.540+(2.00)(0.900)2=0.540+1.62=2.16 kg⋅m2I_A = 0.540 + (2.00)(0.900)^2 = 0.540 + 1.62 = 2.16\text{ kg}\cdot\text{m}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to square the distance in the moment of inertia formula, using I = Σ m*r instead of Σ m*r².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    xcm=1.50×1.200.500+1.50=1.802.00=0.900 m  ⟹  rA=0.900 m,  rB=0.300 mx_{\text{cm}} = \frac{1.50 \times 1.20}{0.500 + 1.50} = \frac{1.80}{2.00} = 0.900\text{ m} \implies r_A = 0.900\text{ m},\; r_B = 0.300\text{ m}

  2. Step 2

    Icm=mArA+mBrB=0.500×0.900+1.50×0.300=0.450+0.450=0.900 kg⋅m2I_{\text{cm}} = m_A r_A + m_B r_B = 0.500 \times 0.900 + 1.50 \times 0.300 = 0.450 + 0.450 = 0.900\text{ kg}\cdot\text{m}^2

    Correct

    Icm=mArA2+mBrB2=(0.500)(0.900)2+(1.50)(0.300)2=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = m_A r_A^2 + m_B r_B^2 = (0.500)(0.900)^2 + (1.50)(0.300)^2 = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2

    You omitted the square on each distance rr. Moment of inertia depends on the square of the distance from the rotation axis, I=∑miri2I = \sum m_i r_i^2.

  3. Step 3

    rA=0,  rB=1.20 m  ⟹  IA=mArA+mBrB=0.500×0+1.50×1.20=1.80 kg⋅m2r_A = 0,\; r_B = 1.20\text{ m} \implies I_A = m_A r_A + m_B r_B = 0.500 \times 0 + 1.50 \times 1.20 = 1.80\text{ kg}\cdot\text{m}^2

    Correct

    IA=mArA2+mBrB2=(0.500)(0)2+(1.50)(1.20)2=2.16 kg⋅m2I_A = m_A r_A^2 + m_B r_B^2 = (0.500)(0)^2 + (1.50)(1.20)^2 = 2.16\text{ kg}\cdot\text{m}^2

    You identified the correct distances from axis A, but you again used mrm r rather than mr2m r^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the center of mass position xcm=0.900 mx_{\text{cm}} = 0.900\text{ m}.

You accurately found the distance of each particle from both rotation axes.

You correctly recognized that a mass located directly on the rotation axis contributes zero rotational inertia.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing square in moment of inertia formula

You set up the distances and masses flawlessly, but wrote I=∑mrI = \sum m r instead of I=∑mr2I = \sum m r^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the first moment of mass (used for locating center of mass, ∑mixi\sum m_i x_i) with the second moment of mass / moment of inertia (I=∑miri2I = \sum m_i r_i^2). Checking dimensional consistency helps: multiplying kg×m\text{kg} \times \text{m} yields units of kg⋅m\text{kg}\cdot\text{m}, whereas moment of inertia must have dimensions of mass times length squared (kg⋅m2\text{kg}\cdot\text{m}^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit and Dimension Check
  • Rotational inertia has SI units of kg⋅m2\text{kg}\cdot\text{m}^2.

  • Always verify that every term in your sum contains a squared distance: [m][r]2=kg⋅m2[m][r]^2 = \text{kg}\cdot\text{m}^2.

First Moment vs. Second Moment
  • Center of mass uses the first power of distance (∑miri=0\sum m_i r_i = 0 about CM); moment of inertia uses the second power (I=∑miri2I = \sum m_i r_i^2).

  • Write out the general definition I=∑miri2I = \sum m_i r_i^2 before plugging in numerical values.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. For part (a), substitute rA=0.900 mr_A = 0.900\text{ m} and rB=0.300 mr_B = 0.300\text{ m} into Icm=mArA2+mBrB2=(0.500)(0.900)2+(1.50)(0.300)2=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = m_A r_A^2 + m_B r_B^2 = (0.500)(0.900)^2 + (1.50)(0.300)^2 = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2.

  2. For part (b), substitute rA=0 mr_A = 0\text{ m} and rB=1.20 mr_B = 1.20\text{ m} into IA=mA(0)2+mB(1.20)2=1.50×1.44=2.16 kg⋅m2I_A = m_A(0)^2 + m_B(1.20)^2 = 1.50 \times 1.44 = 2.16\text{ kg}\cdot\text{m}^2.

Final answer

(a) Icm=0.540 kg⋅m2I_{\text{cm}} = 0.540\text{ kg}\cdot\text{m}^2; (b) IA=2.16 kg⋅m2I_A = 2.16\text{ kg}\cdot\text{m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your formulas dimensionally before calculating: if the expected unit is kg⋅m2\text{kg}\cdot\text{m}^2, distance must be squared.

  • Practice using the parallel-axis theorem (I=Icm+Md2I = I_{\text{cm}} + M d^2) as a cross-check between center-of-mass and parallel axes.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the center of mass is at the geometric midpoint of the rod regardless of the unequal masses.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xcm=1.202=0.600 m  ⟹  rA=0.600 m, rB=0.600 mx_{\text{cm}} = \frac{1.20}{2} = 0.600\text{ m} \implies r_A = 0.600\text{ m},\, r_B = 0.600\text{ m}

    Correct

    xcm=mAxA+mBxBmA+mB=(0.500)(0)+(1.50)(1.20)0.500+1.50=0.900 m  ⟹  rA=0.900 m, rB=0.300 mx_{\text{cm}} = \frac{m_A x_A + m_B x_B}{m_A + m_B} = \frac{(0.500)(0) + (1.50)(1.20)}{0.500 + 1.50} = 0.900\text{ m} \implies r_A = 0.900\text{ m},\, r_B = 0.300\text{ m}

    You divided the rod length by 2 to find the center of mass. Because the two attached spheres have different masses (0.500 kg0.500\text{ kg} vs. 1.50 kg1.50\text{ kg}), the center of mass is shifted toward the heavier sphere B.

  2. Step 2

    Icm=mArA2+mBrB2=0.500(0.600)2+1.50(0.600)2  ⟹  Icm=0.500(0.360)+1.50(0.360)=0.720 kg⋅m2I_{\text{cm}} = m_A r_A^2 + m_B r_B^2 = 0.500(0.600)^2 + 1.50(0.600)^2 \implies I_{\text{cm}} = 0.500(0.360) + 1.50(0.360) = 0.720\text{ kg}\cdot\text{m}^2

    Correct

    Icm=(0.500 kg)(0.900 m)2+(1.50 kg)(0.300 m)2=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = (0.500\text{ kg})(0.900\text{ m})^2 + (1.50\text{ kg})(0.300\text{ m})^2 = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2

    Your formula and arithmetic were executed properly, but the numerical answer was affected by the incorrect center-of-mass position from the previous step.

  3. Step 3

    rA=0, rB=1.20 m  ⟹  IA=mBL2=1.50(1.20)2=2.16 kg⋅m2r_A = 0,\, r_B = 1.20\text{ m} \implies I_A = m_B L^2 = 1.50(1.20)^2 = 2.16\text{ kg}\cdot\text{m}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of moment of inertia for point masses, I=∑miri2I = \sum m_i r_i^2.

You correctly set the distance of sphere A to zero in part (b) and calculated IA=2.16 kg⋅m2I_A = 2.16\text{ kg}\cdot\text{m}^2.

You carried out your arithmetic and unit handling cleanly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Center-of-mass miscalculation for unequal masses

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the center of mass as the geometric midpoint of the rod (L/2L/2), overlooking the mass-weighted average required when the endpoint masses are unequal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Weighted Center of Mass
  • For discrete point masses, xcm=∑mixi∑mix_{\text{cm}} = \frac{\sum m_i x_i}{\sum m_i}, which shifts toward the heavier mass.

  • Always set up an explicit origin and compute the mass-weighted average before finding distances from the center of mass.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the center of mass: xcm=(0.500 kg)(0 m)+(1.50 kg)(1.20 m)0.500 kg+1.50 kg=1.802.00=0.900 mx_{\text{cm}} = \frac{(0.500\text{ kg})(0\text{ m}) + (1.50\text{ kg})(1.20\text{ m})}{0.500\text{ kg} + 1.50\text{ kg}} = \frac{1.80}{2.00} = 0.900\text{ m}

  2. Find the distance from each sphere to xcmx_{\text{cm}}: rA=0.900 mr_A = 0.900\text{ m} and rB=∣1.20 m−0.900 m∣=0.300 mr_B = |1.20\text{ m} - 0.900\text{ m}| = 0.300\text{ m}

  3. Evaluate IcmI_{\text{cm}}: Icm=(0.500)(0.900)2+(1.50)(0.300)2=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = (0.500)(0.900)^2 + (1.50)(0.300)^2 = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2

Final answer

(a) Icm=0.540 kg⋅m2I_{\text{cm}} = 0.540\text{ kg}\cdot\text{m}^2; (b) IA=2.16 kg⋅m2I_A = 2.16\text{ kg}\cdot\text{m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • When finding an axis through the center of mass of a multi-body system, write out xcm=∑mixiMtotalx_{\text{cm}} = \frac{\sum m_i x_i}{M_{\text{total}}} first.

  • Check your center of mass qualitatively: it should always lie closer to the heavier mass than to the lighter one.

  • Practice using the parallel-axis theorem, I=Icm+Md2I = I_{\text{cm}} + M d^2, as a fast cross-check between parts (a) and (b).

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the parallel-axis theorem by subtracting instead of adding I_cm to find the moment of inertia about the end.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    xcm=1.50×1.200.500+1.50=0.900 m  ⟹  rA=0.900 m,  rB=0.300 mx_{\text{cm}} = \frac{1.50 \times 1.20}{0.500 + 1.50} = 0.900\text{ m} \implies r_A = 0.900\text{ m},\; r_B = 0.300\text{ m}

  2. Step 2

    Icm=0.500(0.900)2+1.50(0.300)2=0.405+0.135=0.540 kg⋅m2I_{\text{cm}} = 0.500(0.900)^2 + 1.50(0.300)^2 = 0.405 + 0.135 = 0.540\text{ kg}\cdot\text{m}^2

  3. Step 3

    M=0.500+1.50=2.00 kg  ⟹  d=0.900 mM = 0.500 + 1.50 = 2.00\text{ kg} \implies d = 0.900\text{ m}

  4. Step 4

    IA=Icm−Md2=0.540−2.00(0.900)2=−1.08 kg⋅m2I_A = I_{\text{cm}} - M d^2 = 0.540 - 2.00(0.900)^2 = -1.08\text{ kg}\cdot\text{m}^2

    Correct

    IA=Icm+Md2=0.540+2.00(0.900)2=2.16 kg⋅m2I_A = I_{\text{cm}} + M d^2 = 0.540 + 2.00(0.900)^2 = 2.16\text{ kg}\cdot\text{m}^2

    You subtracted Md2M d^2 rather than adding it. The moment of inertia about any axis parallel to a center-of-mass axis is always strictly greater than IcmI_{\text{cm}}: I=Icm+Md2I = I_{\text{cm}} + M d^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly located the system's center of mass using the weighted position formula.

You accurately calculated the moment of inertia about the center of mass using I=∑miri2I = \sum m_i r_i^2.

You correctly determined the total mass MM and the axis separation distance dd.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Misapplied Parallel-Axis Theorem Sign

You subtracted the parallel-axis shift term Md2Md^2 from IcmI_{\text{cm}} instead of adding it, producing a negative moment of inertia.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the direction of the parallel-axis shift: the center-of-mass axis always provides the minimum possible moment of inertia among all parallel axes, so shifting to any other axis must add positive rotational inertia (I=Icm+Md2I = I_{\text{cm}} + M d^2). A negative value for II is also an immediate physical signal that the formula's sign was flipped.

REASONING PATH
Your ACEpath teacher’s suggested approach
Parallel-Axis Theorem Form
  • I=Icm+Md2I = I_{\text{cm}} + M d^2

  • Always add Md2M d^2 when moving from the center of mass to a parallel axis, ensuring I>IcmI > I_{\text{cm}}.

Physical Sanity Check for Moment of Inertia
  • I=∑miri2≥0I = \sum m_i r_i^2 \ge 0

  • Verify that every moment of inertia is strictly non-negative; if a calculation yields I<0I < 0, check for an inadvertent minus sign.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the known values into the parallel-axis theorem: IA=0.540 kg⋅m2+(2.00 kg)(0.900 m)2I_A = 0.540\text{ kg}\cdot\text{m}^2 + (2.00\text{ kg})(0.900\text{ m})^2

  2. Evaluate the shift term: Md2=2.00×0.810=1.62 kg⋅m2M d^2 = 2.00 \times 0.810 = 1.62\text{ kg}\cdot\text{m}^2

  3. Sum the terms: IA=0.540+1.62=2.16 kg⋅m2I_A = 0.540 + 1.62 = 2.16\text{ kg}\cdot\text{m}^2

Final answer

(a) Icm=0.540 kg⋅m2I_{\text{cm}} = 0.540\text{ kg}\cdot\text{m}^2; (b) IA=2.16 kg⋅m2I_A = 2.16\text{ kg}\cdot\text{m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of the parallel-axis theorem to see why the center of mass always minimizes the moment of inertia.

  • Practice direct summation (I=∑miri2I = \sum m_i r_i^2) versus the parallel-axis theorem to cross-check results on asymmetric two-mass systems.

  • Always perform a quick sanity check: any rotational inertia about a non-CM axis must be larger than IcmI_{\text{cm}} and strictly positive.

Lock it in

Similar question

01

A light rod of length 0.80 m0.80\text{ m} has a 2.0 kg2.0\text{ kg} mass at one end and a 2.0 kg2.0\text{ kg} mass at the other end. Calculate the moment of inertia about an axis perpendicular to the rod passing through its midpoint.

Answer

I=0.64 kg⋅m2I = 0.64\text{ kg}\cdot\text{m}^2. Each mass is at distance r=0.40 mr = 0.40\text{ m}. Thus, I=2.0(0.40)2+2.0(0.40)2=0.32+0.32=0.64 kg⋅m2I = 2.0(0.40)^2 + 2.0(0.40)^2 = 0.32 + 0.32 = 0.64\text{ kg}\cdot\text{m}^2.

02

Three point masses of 1.0 kg1.0\text{ kg}, 2.0 kg2.0\text{ kg}, and 3.0 kg3.0\text{ kg} are located on the xx-axis at x=1.0 mx = 1.0\text{ m}, x=2.0 mx = 2.0\text{ m}, and x=3.0 mx = 3.0\text{ m} respectively. Calculate the moment of inertia of the system about the yy-axis.

Answer

I=36 kg⋅m2I = 36\text{ kg}\cdot\text{m}^2. The perpendicular distances from the yy-axis are the xx-coordinates: I=(1.0)(1.0)2+(2.0)(2.0)2+(3.0)(3.0)2=1.0+8.0+27.0=36 kg⋅m2I = (1.0)(1.0)^2 + (2.0)(2.0)^2 + (3.0)(3.0)^2 = 1.0 + 8.0 + 27.0 = 36\text{ kg}\cdot\text{m}^2.

03

A light rigid rod of length L=2.0 mL = 2.0\text{ m} carries a mass m1=1.0 kgm_1 = 1.0\text{ kg} at x=0x = 0 and m2=3.0 kgm_2 = 3.0\text{ kg} at x=2.0 mx = 2.0\text{ m}. Find the center of mass xcmx_{\text{cm}}, compute IcmI_{\text{cm}}, and verify IendI_{\text{end}} at x=0x = 0 using both direct calculation and the parallel-axis theorem.

Answer

xcm=1.5 mx_{\text{cm}} = 1.5\text{ m}; Icm=3.0 kg⋅m2I_{\text{cm}} = 3.0\text{ kg}\cdot\text{m}^2; Iend=12 kg⋅m2I_{\text{end}} = 12\text{ kg}\cdot\text{m}^2. Key steps: xcm=1(0)+3(2)4=1.5 mx_{\text{cm}} = \frac{1(0) + 3(2)}{4} = 1.5\text{ m}. Distances to CM are r1=1.5 mr_1 = 1.5\text{ m}, r2=0.5 mr_2 = 0.5\text{ m}. Icm=1(1.5)2+3(0.5)2=2.25+0.75=3.0 kg⋅m2I_{\text{cm}} = 1(1.5)^2 + 3(0.5)^2 = 2.25 + 0.75 = 3.0\text{ kg}\cdot\text{m}^2. Direct: Iend=1(0)2+3(2.0)2=12 kg⋅m2I_{\text{end}} = 1(0)^2 + 3(2.0)^2 = 12\text{ kg}\cdot\text{m}^2. Parallel-axis: I=Icm+Md2=3.0+(4.0)(1.5)2=3.0+9.0=12 kg⋅m2I = I_{\text{cm}} + M d^2 = 3.0 + (4.0)(1.5)^2 = 3.0 + 9.0 = 12\text{ kg}\cdot\text{m}^2.

Loading workspace…