Resources
Two light bulbs, Bulb A rated at at and Bulb B rated at at , are connected together in series across a single power line. Assuming both filaments exhibit constant ohmic resistances: (a) calculate the individual resistance and of each bulb. (b) Calculate the actual power dissipated by each bulb in this series configuration, and identify which bulb dissipates more thermal and luminous power.
Answer and steps
Final answer
(a) , ; (b) , ; Bulb A dissipates more power.
Steps
Part (a): Determine the Filament Resistances
The rated power of an electrical appliance is related to its rated voltage and its internal resistance by the formula:
Rearranging this formula allows us to solve for the resistance of each filament:
- For Bulb A ( at ):
- For Bulb B ( at ):
Part (b): Calculate the Power Dissipated in Series
When the two bulbs are connected in series across the source:
- Find the total equivalent resistance ():
- Find the common circuit current (): Using Ohm's law ():
-
Calculate the power dissipated by each bulb ():
- Bulb A:
- Bulb B:
- Comparison: Comparing the two values, (), so Bulb A dissipates more power.
Common Pitfall: In parallel, the bulb with the higher rated wattage consumes more power because each experiences the full voltage (). However, in a series circuit, both bulbs carry the exact same current . Because power is given by , power dissipation is directly proportional to resistance. As a result, the bulb with the larger resistance (the bulb) consumes more power and glows brighter in series.
Typical errors
01 The student assumes bulbs in series operate at their rated powers or that the higher-rated bulb always dissipates more power regardless of configuration.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
A bulb only dissipates its rated power if the full rated potential difference of drops across it. In a series circuit, the total is divided between the two bulbs, so neither receives the full .
- Step 3
Bulb B dissipates more power because its rating of is higher than .
CorrectBulb A dissipates more power ().
Because both bulbs share the same current in series, actual power dissipation depends directly on resistance through . Bulb A has the larger resistance (), so it dissipates more power.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the rated voltage and power formula to determine the individual resistance of each bulb.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the rated nominal power as the operating power in an arbitrary circuit configuration, forgetting that rated power applies only when the appliance experiences its full rated voltage.
REASONING PATH
Your ACEpath teacher’s suggested approach- Rated vs. Actual Operating Conditions
Ratings () specify intrinsic resistance (). Operating power depends on actual circuit voltages or currents.
Use rated values strictly to find constant parameters such as resistance , then analyze the new circuit using Ohm's and Kirchhoff's laws.
- Power Comparison in Series vs. Parallel
In series, current is identical, so means higher resistance yields higher power. In parallel, voltage is identical, so means lower resistance yields higher power.
Identify the shared circuit variable (constant for series, constant for parallel) to select either or .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the total resistance of the series circuit: .
Find the series current supplied by the source: .
Calculate the actual power dissipated by each bulb: and .
(a) , ; (b) , ; Bulb A dissipates more power.
02 The student calculates resistances correctly but assumes each bulb in series receives the full 120 V line voltage using P = V²/R.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
In a series circuit, the bulbs share the total potential drop according to Kirchhoff's voltage law (). They do not each experience the full line voltage; instead, the same current flows through both.
- Step 3Correct
Because this comparison relies on the incorrect power values from the previous step, your conclusion is reversed. With a shared current , power is directly proportional to resistance (), so the bulb with the larger resistance (Bulb A) dissipates more power.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the rated voltage and power to determine the internal resistance of both bulbs.
You showed clear, organized algebraic steps and labeled your units properly.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the series connection as if it were a parallel connection by applying the full source voltage independently across each load. In series, current is common and voltage divides (), whereas in parallel, voltage is common ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Circuit Topology Check
In series, current is identical through all components and voltages add up to the source voltage (). In parallel, every branch experiences the same terminal voltage.
Check how the components are linked before assigning voltages: if connected end-to-end in a single path, find the total resistance and common current first.
- Power Formula Selection
When current is common (series), use to see that larger dissipates more power. When voltage is common (parallel), use to see that smaller dissipates more power.
In series circuits, express power in terms of the shared circuit current .
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the equivalent resistance: .
Calculate the series current: .
Calculate the actual power of Bulb A: .
Calculate the actual power of Bulb B: .
(a) , ; (b) , ; Bulb A dissipates more power.
03 The student misremembers the resistance formula as R = V/P instead of R = V²/P, which inverts the resistance values and leads to incorrect current and powers.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You related power and resistance as . Because electrical power is related to voltage and resistance by , solving for resistance requires squaring the rated voltage: .
- Step 2Correct
Your method of adding series resistances and dividing source voltage by equivalent resistance was correct, but your numbers were carried over from the incorrect resistance values in Step 1.
- Step 3Correct
You correctly selected the series power formula , but the resulting power values were inflated because of the incorrect earlier current and resistances.
- Step 4
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that series components share the same current and that equivalent resistance is the sum of the individual resistances.
You correctly applied Ohm's law to determine circuit current.
You chose the ideal formula to compare power dissipation for components connected in series.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused (Ohm's law) with the power relationship . Dividing voltage by power yields , which is reciprocal current rather than electrical resistance.
REASONING PATH
Your ACEpath teacher’s suggested approach- Deriving Resistance from Rated Power
When given rated voltage and rated power , always write and rearrange to by squaring the voltage.
- Checking Units and Dimensional Consistency
Verify that your expression produces ohms (). Since , .
CORRECTED PATH
ACEpath Teacher's DemonstrationCalculate the correct resistance of Bulb A: .
Calculate the correct resistance of Bulb B: .
Find the total series resistance: .
Find the circuit current: .
Calculate actual power for each bulb: , and .
(a) , ; (b) , ; Bulb A dissipates more power.
Lock it in
What physical property remains constant for an incandescent filament regardless of the circuit it is plugged into?
Its ohmic resistance . Operating voltage, current, and dissipated power change with circuit arrangement.
Similar question
Two resistors, and , are connected in series across a DC power source. Calculate the power dissipated in each resistor.
Answer
, . Total resistance . Circuit current . Power in : . Power in : .
A bulb and a bulb are connected in series across a source. Find the voltage across each bulb and verify whether either bulb exceeds its rated voltage.
Answer
, ; the bulb exceeds its rated voltage. Resistances are and (ratio ). Voltage across is , causing it to burn out.
Three identical heaters are arranged such that two are in parallel, and that combination is in series with the third. The network is connected to a supply. Determine the power dissipated by each of the three heaters.
Answer
, . Equivalent resistance of parallel pair is , so . Total current . The solitary heater carries , dissipating . Each parallel heater carries , dissipating .